E-mail conversion to Lion failed, Now what?

I just installed Lion and my e-mail conversion failed. It said to check to be sure there is enough room in my home folder. I have 49GB available on my 15" macBook Pro. HOw do I proceed?

Use Eudora Mailbox Cleaner to do the conversion.

Similar Messages

I can't use Quicken with Lion. Now what?

I can't use Quicken with Lion. Now what?

Peter,
Another solution, though not particularly convinient, would be to create a Snow Leopard boot drive on a external drive that you can switch to when you want to run Quicken.
Matt

Activation failed, now what

I am using an Apple TV my dad gave me (2nd hand). I have reset the settings, and connected to my WIFI. It tells me activiation failed. Now what?

Welcome to the Apple Community.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

OS X Lion Server upgrade *failed*, now what?

The installation process got as far as registering a message like, "Upgrading Services, failed". The only option was to click the Lion icon for reboot. That, I did, then I couldn't find the 10.7 Server Admin Tools, which I had to download separately. The "Open Directory" part of the Server Admin UI does not have the *expected* start/stop button and the service is stopped.
It would be nice to have a post-upgrade program to checklist what went well, what needs fixing with pointers to resources. It's possible none of my services programs got upgraded.
I got an email receipt with a link to "Report a Problem" which turns out to be mostly a hole for getting lost, but at least it got me here to present feedback.

goeres wrote:
But do we need all the blows and wristles?
Yes. Lion Server out of the box does not allow for complex custom configurations short of manually editing text configuration files, which is an ironic step backwards from SL Server considering Apple's commitment to ease-of-use GUIs.
Instead of improving the admin tools that were available with SL Server, they simply removed too many of them. That would suggest that they've given up on the market for business servers to focus on the market for toy servers for home use, which is a bit disconserting considering that Lion Server's security is also woefully lacking out of the box. It's hard to figure how any IT professional could take it seriously.
The Internet is a dangerous place to play with a server. Apple's quest to simplify OS X Server with Lion has resulted in a server package that is dangerously simplistic. If Lion Server becomes popular for home use, I expect to see a rapid expansion of botnets.

Config Manager 2012 R2 Update Failed - Now What?

Starting Environment:
Windows Server 2012 VM
Configuration Manager 2012 CU1
SQL Server 2012 Enterprise SP1 installed on a separate 2 node cluster
We have been running this setup for Config Manager 2012 CU1 for about a year now with no issues at all. In an effort to deploy Windows 8.1 I ran the Configuration Manager 2012 R2 Update. The update failed halfway through. From the ConfigMgrSetup.log
it looks like it wasn't able to connect to the database and this is why the update failed. Problem is after the install failed I am no longer able to connect to the database when opening the CM console. I get the "Configuration Manager cannot connect
to the site" message. Here is the error from the SMSAdminUI.log:
[02/24/2014 19:10:21] :Transport error; failed to connect, message: 'The SMS Provider reported an error.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe SMS Provider reported an error.\r\n at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nConfigMgr Error Object:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'EPS'";
ProviderName = "WinMgmt";
Error Code:
ProviderLoadFailure
\r\nSystem.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'EPS'";
ProviderName = "WinMgmt";
\r\n
[10, PID:6140][02/24/2014 19:10:21] :System.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters, Boolean traceParameters)\r\nManagementException details:
I have tried running the R2 update again but am now faced with the following 2 failures during run check:
Current SUM configuration uses virtual locations for some of the active SUPs. Please remove any virtual locations from the existing SUM configuration.
There is an active source hierarchy configured for migration. Please stop data gathering for each source site in the source hierarchy.
I do not know how I can fix these errors without being able to connect through the console.
Does anyone have any ideas on how I can reconnect the console to the database and eventually successfully run the R2 update?
Database itself seems fine. No errors. Database mounts fine.
Thanks in advance for any input.

Hi,
I saw a similar problem with yours. It should be helpful.
http://social.technet.microsoft.com/Forums/en-US/dda03cc4-e78e-409b-a9dd-f6d8a4f96774/upgrade-to-system-center-2012-sp1-prerequisite-check-failed-with-error-software-update-points-in?forum=configmgrsum
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

File system verify failed, now what?

I was about to upgrade to Snow Leopard from 10.5.8 and before that tried to back up my drive to a new G Drive. Using Carbon Copy Cloner the process quit in the middle when the G Drive unmounted itself. I ran Disk Utility Verify on the G Drive and it showed up ok. I then tried again and CCC again stopped but this time with an error message I do not recall. Then I tried SuperDuper and the backup hung on an App (Garage Band) for 15 minutes and I aborted the back up. I ran Verify on the G Drive again and it was fine so I ran Verify on the HD and got the following message:
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
Filesystem verify or repair failed.
Invalid volume file count
(It should be 1111231 instead of 1111232)
Invalid volume directory count
(it should be 242475 instead of 242474)
The volume Macintosh Hard Drive needs to be repaired.
Error: Filesystem verify or repair failed.
I have not tried the repair yet as I'm nervous I'm going to lose something. The drive isn't making noise but is slow. I've read suggestions of booting from the installation disc and then running Verify. My disc is 10.5.4, will I encounter issues after since I'm 10.5.8 now? Can I get a little hand holding here?
Machine is iMac, 2.16GHz Intel Core Duo, 4GB 667 MHz DDR2 SDRAM, OS 10.5.8
Thanks,
Stuart

studog2 wrote:
I've read suggestions of booting from the installation disc and then running Verify.
No, you need to start from your Leopard Install disc and run Repair Disk. See #6 in Formatting, Partitioning, Verifying, and Repairing Disks.

I just figured out that my CanoScan won't work with Mountain Lion. Now what?

I have already upgraded to Mountain Lion. Then, I noticed that my scanner won't work. The person at Cannon said that the scanner drivers are not ready so that they will interface with Mountain Lion. He couldn't tell me how long it would be before Cannon caught up. Do I have to delete Mountain Lion to scan?

You're looking for solutions, so I'll let you know what you need to do:
1. If you have sufficient storage, you can make separate partitions for Mountain Lion and Lion.
2. Invest in a new hard drive, install Lion, and use it to do your scanning. I don't know how to do this, but it is possible.
3. You can wait for Canon to update their scanner software, but it's hard to tell when (or if) you will get it.
4. Often, third-party developers come up with scanning and printing software for unsupported devices, but given the recency of ML, there's no certainty when the software will come out - or what it will cost.
5. Scrap your current scanner, and replace it with a new machine.
I don't know how often you use your scanner, so it's hard to tell which you should do.

HT5361 Mail thinks it's junk - now what?

When mail says it thinks an email is junk, I have a choice to disagree but what do I do if I agree? When I delete the email does that confirm it is junk?

If you agree, then just leave it alone (i.e., leave it marked as "Junk"). Mail will learn over time based on what you mark as junk, what you leave marked as junk, and what you change to "Not Junk". When you receive junk mail, mark it as "Junk" if Mail hasn't already done so, and then just delete it.

All help posted for Firefox cannot load websites but other programs can fail, now what?

I have tried all the things listed but they made no difference at all.
I have no problem with IE. I have been to this site before and it is a bookmarked site.
This problem only came with the last update that never saved any of my search engines either.
Can go to some sites but not others and I have been there before.
Is it time to dump Firefox?
EDIT: One of the sites is speedtest.net, how crap is that?

Big FAIL there as well. I have already tried all that.
I also ran Moz Backup and that failed to help.
I can google speedtest but when I click on the result in the search it times out.
If I try from my bookmarks it also times out.
I have about 80 bookmarks I use all the time
I won't return to Firefox if this is the crap I get after updates.
Not the first time I have had to start from the beginning.
Why do they release this crap if it is not ready for us to use?
I have already tried all the things listed as well as increasing the time out period. That just took longer to tell me it had timed out. RUBBISH

First Aid failed - now what?

While running First Aid in Disk Utility, I get a an Error message, "Disk Utility stopped verifying because the following error was encountered: The underlying task reported failure on exit". Before this, disk utility clearly says that various volumes need to be repaired (including my hard-drive) but because of this error I never get that far. Any ideas of what I can do to remedy this problem?

I had no intention of giving you that impression and nor do I think that. If my wording made you think that I apologize.
The hard disk inside your Mac is your start-up disk, the one you start your Mac from. It cannot repair itself, so you need instead to start up from the install disk that came with your Mac - this why it is so important to have it.
Place that DVD in your superdrive and go to the Apple menu and click on Restart. Hold down the c key on your keyboard until your Mac has started up. This will take a bit longer than when you start from your hard disk.
You are NOT going to install anything, but just select English as your language (assuming that it is!), and ignore the next (install) window that appears. Go to Utilities in the menu at the top of the screen, and go to Disk Utility. Select your Hard Disk and click on repair.
This will take a little while and you will see all kinds of messages in the window, all of which you can ignore. Finally it will say Disk Repaired, and you then restart again without holding down the c key, in order to start up again from your built-in hard disk.

My Canon selphy CP800 is not support by OS X Lion. Now what?

I recently upgraded to Lion. I have a Canon Selphy CP800 photo printer, and I am unable to print photos. Canon does not have a driver for this. Canon Support worked with me to try and get around this stumbling block to no avail. Does anyone out there have a solution?

After downloading this driver
file:///Users/winfordb/Downloads/SELPHY%20CP%20series%20Printer%20driver_6.2.0.1 .pkg I tried installing it and got the message "cannot install this driver it is not compatible with your os" I called canon suport and received the following instructions. " Control click on the downloaded package and then follow the instructions. I have a macbook pro running mavericks. IT WORKED! Don't connect the usb cable to your printer and computer until after the driver has installed. If you have the printer working via wi fi then this installation may show as CP900-2
FWIW.

What is happening with quote substitution in Mail since Mountain Lion?

What is happening with quote substitution in Mail since Mountain Lion? Now, whenever I type an apostrophe and it's replaced with a smart quote, it creates an unwanted space within my word and starts typing from there. It will also revert the font from my template style to helvetica. Annoying as heck! Any thoughts? Turning off smart quote substition in Mail elimates the error, but elimates the smart qoute, too. I'm stumped.

What is happening with quote substitution in Mail since Mountain Lion? Now, whenever I type an apostrophe and it's replaced with a smart quote, it creates an unwanted space within my word and starts typing from there. It will also revert the font from my template style to helvetica. Annoying as heck! Any thoughts? Turning off smart quote substition in Mail elimates the error, but elimates the smart qoute, too. I'm stumped.

HT5567 Tried several times to run update and it always comes back attempt failed. Now what?

Tried running update. Keeps coming back attempt failed. now what?

See these threads and pages about searchqu/searchnu:
*[[/questions/816181]]
*[[/questions/790833]]
*[[/questions/921690]]
*http://bit.ly/searchqutoolbar
*http://www.ilivid.com/faq.htm#8
*http://www.beyourownit.com/forum/security-malware-issues/4758-searchnu-searchqu.html

Tiger to Lion mail conversion

My trusty mirror door G4 (running OS 10.4) is going in to semi-retirement and will no longer be used to access e-mail accounts. A Mac Pro running Snow Leopard or Lion will now be used for that purpose. How can I move mailboxes from the old machine to the new one after recreating the relevant accounts on the Mac Pro? Specifically, what files on the G4 need to be moved where on the Mac Pro, and what if any conversions or preps do I need to make on the old files before transplanting them? Thanks for any insights.

I haven't tried importing to 10.7 from 10.4, but I thing it would work.
I'd setup the accounts first, enable File Sharing on the older one, or coppy the whole top Mail folder over to the new one...
Users/YourUserName/Library/Mail
On the new one, Mail>File>Import Mailboxes>Mail from OSX, then point at that Mail folder, give it time to come up with which ones to import.
The selected boxes will come into a new Iport box on the new one, eventually you can then select & drag them to one of your other setup boxes.

I updated to mountain lion and now mail cannot connect to my server

I updated to mountain lion and now mail cannot connect to my server. It says check your user name and password are correct. Well they are, and were. Nothing has changed except the mac OS.
Has anyone else suffered this and knows a way around it? Too annoying to log into my mail every 15mins via a web page anymore.
Efforts tried to resolve this so far:
retyped user name and password, removed account and created a new account, restarted computer, software update, searched forums. so far all have proved unsuccessful.
I have also written to my mail provider and am waiting for feed back from them, but if anyone has any advice it would be gratefully received.
Many thanks,
Mike

Many users upgrading to Mountain Lion have run into this problem, myself included. You likely have corrupted settings for your "Outgoing Mail Server (SMTP)" for each of the failed Accounts. Open Mail>go to Mail's Preferences>Accounts>select an Account in the left column to work on>then set up your Outgoing Mail Server which will INCLUDE resetting up your Password, as its asking you to. Click on "SMTP Outgoing Mail Server" near the bottom of the Accounts window while your mail account is highlighted in the left hand column. When you click on SMTP... you will see a drop down box icon offered at the right side of the line. Click it and then select at the bottom of the the list "Edit SMTP Mail Server". Fill in the required settings for your ISP mail account using their recommended settings.

E-mail conversion to Lion failed, Now what?

Similar Messages

Maybe you are looking for