E-Recruit - Problem creating candidates using RCF_CREATE_USER

When I try to create candidates for e-recruitment in se38 using the program RCF_CREATE_USER I get an error message that says "Enter at least one number for the business partner".
But if I try to run the program again for the same user then it says that "A candidate already exists for the user". However if I check in su01, no reference user has been addded to the user roles.
Can anyone suggest why this isn't working.

Hello,
We never had any issue while using this program 'RCF_CREATE_USER' though our recruit is still not working because of some other issues. We do get this error '"A candidate already exists for the user" whenever we try to repeat a username. If you use a username in this program which you never have used it before, you wont get this message. Try creating a new user in SU01 and then use in this program. You wont get this message. Normally we assume that a user is created even if you get some error after running the program. This is just my assumption. It seems E-recruiting  model is very very complex!!
Let me know if you need any docs on Customizing the IMG for E-recruiting.
Regards,
Ahmad
Message was edited by: Ahmad Quraishi

Similar Messages

  • Problem creating TO using Function Module L_TO_CREATE_DN

    Hi Gurus,
    I am trying to create TO using the Function Module L_TO_CREATE_DN. Its creating TO for deliveries for materials which are not batch split, however when I am taking delivery consisting of Batch Split material, its not creating and throwing a error with sy-subrc = 15. The error which I am experiencing is Item not handled in batches and batch split item cannot be edited. How to overcome this issue and create the TO.
    Regards,
    Avik
    Edited by: avik2005uitbu on Dec 15, 2011 8:10 PM

    Hi,
    Please check the WM config for the Warehouse / Movement type(Tx. OMLX) . There we have option to give as immediate confirmation. This may be the reason for TO getting confirmed when created.
    U can this by creating a transfer order for the same movement type manually in TX. LT03. After you save if the To is confirmed then its a config setup @ Warehouse / Movement type.
    Regards,
    Bhargava

  • Problem creating jar using JDeveloper

    I'm creating jar using JDeveloper..I need to keep two dll files in the jar. But if I create the jar in JDeveloper, it can't include the dll files. If the jar is created from command prompt, it can include the dll files. Can anyone tell me how can I include these dlls in my jar?

    Putting DLLs in your classes directory is dangerous (eg. Run->Clean Project.jpr will remove it). I use a different way to achieve that:
    When you double click on the deployment profile you'll see a dialog window containing a list of items. The one of interest is the one called File Groups. Select this item, click on the New button and add a new file group just for your DLLs.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • E-recruiting - Problems with candidate search

    Hi experts,
    I'm trying to test some enhancements in E-recruiting and I'm facing problems with the candidate search. At firts I thought the problem was with Trex, but after run report RCF_RECREATE_SEARCH_PROFILES I've found the errors below:
    Error in program CL_HRRCF_SPB_CANDIDATE========CM003 line51
    Error in program  CL_HRRCF_SP_BUILDER===========CM003 line115
    Error in dinamic calling method for class CL_HRRCF_CEC_INFOTYPE
    Error in program  CL_HRRCF_CEC_INFOTYPE=========CM005 line 83
    Error in program  CL_HRRCF_CEC_INFOTYPE=========CM005 line 68
    Does anybody know what these errors mean?
    Thanks in advance for any kind of help!
    Best regards,
    Thais

    Hi again,
    Based on the reply I got for this thread I corrected an inconsistency I've found in the category of seach table, it was using a table as structure instead of an infotype. I've run report RCF_RECREATE_SEARCH_PROFILES  again and the error is still the same.
    As other trex searches such as advertise search is not working, I believe the problem is not only this, because this other seach uses another search profile that was not enhanced.
    Does anybody has another suggestion?
    Thanks in advance for any input!
    Best regards,
    Thais

  • Problem creating dataset using db2 stored procedure in Eclipse BIRT

    Hi,
    I am using DB2 9.7 Express Edition in Eclipse BIRT(version 2.5.1) for generating reports. I have used Type4 driver for jdbc connection.
    For that, I have established jdbc connection using db2jcc.jar and db2jcc_license_cu.jar files.
    I have successfully created data source, say DB2BIRT having following requisites-
    Driver Class - com.ibm.db2.jcc.DB2Driver ( v3.50)
    Driver URL - jdbc:db2://localhost:50000/database_name
    User name - user_name
    Password - Password
    I have written some stored procedures and trying to use resultsets from those stored procedures into my report..
    The stored procedures having involvement of only single resultset are working absolutely fine for new dataset using above DB2BIRT.
    But, I am unable to create new dataset using stored procedures those having involvement of multiple resultsets.
    I am getting following error as -
    org.eclipse.birt.data.engine.odaconsumer.PreparedStatement$SequentialResultSetHandler getMoreResults
    SEVERE: Cannot get more result sets from the statement.
    Cannot get the result set.
    SQL error #1: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
    org.eclipse.birt.report.data.oda.jdbc.JDBCException: Cannot get the result set.
    SQL error #1: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
    com.ibm.db2.jcc.b.SqlException: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
    at org.eclipse.birt.report.data.oda.jdbc.CallStatement.getMoreResults(CallStatement.java:1760)
    at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaAdvancedQuery.getMoreResults(OdaAdvancedQuery.java:214)
    at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement$SequentialResultSetHandler.getMoreResults(PreparedStatement.java:5183)
    at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement.getMoreResults(PreparedStatement.java:792)
    at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement.flushResultSets(PreparedStatement.java:1009)
    at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement.close(PreparedStatement.java:980)
    at org.eclipse.birt.data.engine.executor.DataSource$DataSourceReleaser.run(DataSource.java:374)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: com.ibm.db2.jcc.b.SqlException: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
    at com.ibm.db2.jcc.b.wc.a(wc.java:55)
    at com.ibm.db2.jcc.b.wc.a(wc.java:102)
    at com.ibm.db2.jcc.b.tk.db(tk.java:3118)
    at com.ibm.db2.jcc.b.tk.a(tk.java:1063)
    at com.ibm.db2.jcc.b.tk.getMoreResults(tk.java:908)
    at org.eclipse.birt.report.data.oda.jdbc.CallStatement.getMoreResults(CallStatement.java:1756)
    ... 7 more
    Moreover, I tried to resolve above issue by changing Driver Class from com.ibm.db2.jcc.DB2Driver ( v3.50) to com.ibm.db2.jcc.uw.DB2StoredProcDriver ( v3.50)
    So again while *"Test Connection"* for new Data source using this new driver class for stored procedure, there is an error reflection as -
    org.eclipse.birt.report.data.oda.jdbc.JDBCException: The selected driver cannot parse the given url.
    at org.eclipse.birt.report.data.oda.jdbc.JDBCDriverManager.testConnection(JDBCDriverManager.java:627)
    at org.eclipse.birt.report.data.oda.jdbc.ui.util.DriverLoader.testConnection(DriverLoader.java:120)
    at org.eclipse.birt.report.data.oda.jdbc.ui.util.DriverLoader.testConnection(DriverLoader.java:133)
    at org.eclipse.birt.report.data.oda.jdbc.ui.profile.JDBCSelectionPageHelper.testConnection(JDBCSelectionPageHelper.java:653)
    at org.eclipse.birt.report.data.oda.jdbc.ui.profile.JDBCSelectionPageHelper.access$7(JDBCSelectionPageHelper.java:627)
    at org.eclipse.birt.report.data.oda.jdbc.ui.profile.JDBCSelectionPageHelper$7.widgetSelected(JDBCSelectionPageHelper.java:549)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1176)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3493)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3112)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
    at org.eclipse.jface.window.Window.open(Window.java:801)
    at org.eclipse.birt.report.designer.ui.dialogs.BaseDialog.open(BaseDialog.java:110)
    at org.eclipse.birt.report.designer.data.ui.actions.EditDataSourceAction.doAction(EditDataSourceAction.java:68)
    at org.eclipse.birt.report.designer.internal.ui.views.actions.AbstractElementAction.run(AbstractElementAction.java:70)
    at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1176)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3493)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3112)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
    at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Can anybody address my this issue for successful implementation of stored procedure(with involvement of multiple resultsets) for creating Data set in Eclipse BIRT ?
    I will be really thankful.
    Thanks in advance,
    Manasi

    Well, in my stored procedure I have used 2 to3 cursors(as per my business logic) and all cursors except one are holding result sets. That exceptional cursor is intended for holding as well as returning result set after call to the procedure. And its perfectly running on db2 and returning the desired output. The problem is with Eclipse. The same procedure is not working in Eclipse BIRT.

  • Problem creating CalculationView using Eclipse on MacOSX

    Hi guys,
       I'm trying to follow the steps of tutorial Using HANA Modeler in SAP HANA Cloud Platform, but it's giving a error when creating the Join of SO_CV view when running on MacOS Leopard. When I link the tables SNWD_BPA and SNWD_SO the link is erased and when I try using the Join wizard I cannot click on finish or Add a column as output.
      But when I do the same steps on Windows it's works without problem. I've done the procedure several times in both systems, and only get error on MacOS.
      Anyone else having this issue ?
    Regards,
    Cleber Santz

    Hi Vladimir,
       I already have a updated Eclipse (Kepler) install:
        UI5: 1.20.7
        HANA Tools: 1.0.7400
        HANA Cloud Tools: 1.27.0
        NEO J2EE 6 SDK: 2.34.6.1
       When the problem occurs, it cause a graphic issues as well on View Diagram. See image attached.
    Regards,
    Cleber Santz

  • Problem creating documents using BAPI_DOCUMENT_CREATE2

    Dear all,
    I am using
    BAPI_DOCUMENT_CREATE2
    to create a quality document attachment ( PDF file)  for one of our dynpro screen..
    then  I retrive the document information using  'BAPI_DOCUMENT_CHECKOUTVIEW2
    and show the document using function module
    CV120_START_APPLICATION
    1) it works fine only for the person who is creating the document as the bapi is creating a reference to his directory path.
    2) it  doesnt work if the user is moving the file into another directory on his local computer as the directory reference path is gone..
    3) if a different user is trying to acess file it doesnt even show up as   he will never have the direcory path created by some body else.
    how to over come this situation.
    I have done lot of investigation and I found that 'BAPI_DOCUMENT_CHECKOUTVIEW2 has some paraneters
    pf_http_dest = 'SAPHTTPA'
    pf_ftp_dest = 'SAPFTPA'
    but could not able to understand it properly. Please kindly help..
    Thank you very much in Advance.
    Regards
    syam.
    Edited by: syambabu g on Oct 22, 2008 1:39 PM
    Edited by: syambabu g on Oct 22, 2008 1:47 PM
    Edited by: syambabu g on Oct 22, 2008 1:50 PM

    Please refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
    Data Carriers for Storage the Originals of DMS

  • Problem Creating Portles Using JAVABEANS

    I have an application that uses JSP and JavaBeans that works perfectly outside of a portlet. When implementing it as a portlet it is unable to find the JavaBeans.
    I have stored the JavaBeans in the default /WEB-INF/classes directory. The JSP files are in their own directory.
    Request URI:/jnetjsp/adminusersearch/AdminUserSearch.jsp
    Exception:
    oracle.jsp.parse.JspParseException: Line # 28, Error: Unable to find class for bean: UserResults defined by tag with class: adminusersearch.UserSearchResults
    9iAS 1.0.2.2.0

    You need to make sure that your JavaBean classes are on the classpath. Not sure why you mention the WEB-INF directory, it doesn't exist under JServ.
    As far as I remember you need to edit the wrapper.classpath entry in the jserv.properties file. For example, if you have your beans in a the mybeans.jar file, you'd need to create an entry like this:
    wrapper.classpath=D:\jpdk\lib\mybeans.jarand copy mybeans.jar to the D:\jpdk\lib folder.
    Hope this helps.

  • Problem creating a 'used sources' list based on EXIF data in InDesign CS5

    Hello everyone,
    I recently started to use InDesign CS5 to work on school projects. These projects regularly require us to have a list of sources, not only for citations and referenced work, but also for images. As I sometimes make quite long documents, keeping track of what image is where, and where I got it from, gets tedious.
    I had the idea of generating a caption based on EXIF data, which I'd move to the pasteboard, and group it with the image. The text in the caption has a seperate, numbered paragraph style. On one of the last pages, I generate a table of contents, which the numbered paragraph style selected. I chose to display it using another paragraph style, without page numbers.
    What I want to have as the end result is:
    Table of contents
    1. <Title>. <Author> (<Creation Date>). Retrieved <Date Placed> through <Description>
    The captions display correctly, as shown above in the body of the table of contents. The table of contents itself however, shows only the numbering in front of it, and not the variables.
    I already tried converting the live captions to static captions, but that doesn't work. Does anyone have an idea how to solve this?

    Hello everyone,
    I recently started to use InDesign CS5 to work on school projects. These projects regularly require us to have a list of sources, not only for citations and referenced work, but also for images. As I sometimes make quite long documents, keeping track of what image is where, and where I got it from, gets tedious.
    I had the idea of generating a caption based on EXIF data, which I'd move to the pasteboard, and group it with the image. The text in the caption has a seperate, numbered paragraph style. On one of the last pages, I generate a table of contents, which the numbered paragraph style selected. I chose to display it using another paragraph style, without page numbers.
    What I want to have as the end result is:
    Table of contents
    1. <Title>. <Author> (<Creation Date>). Retrieved <Date Placed> through <Description>
    The captions display correctly, as shown above in the body of the table of contents. The table of contents itself however, shows only the numbering in front of it, and not the variables.
    I already tried converting the live captions to static captions, but that doesn't work. Does anyone have an idea how to solve this?

  • E-recruiting: create internal user failture when using RCF_CREATE_USER

    Hi, experts
        When I create candidate and internal user in E-recuriting using report RCF_CREATE_USER, the system returns me a message: "I::000 Enter at least one number for the business partner" , and so i can't create the user successfully.
        Can anyone show me the solution?
        Thanks very much.
        Best Regards,
        qiuguo

    Hi
    just a thought.....it may not be creating a CP /BP....check your authorization.....hope this helps.....b/r

  • Recruiting problem with the candidate search by trex with questionnaires

    Hi Gurus,
    I am trying to search candidates using trex in recruiting by candidate_questionnaires but the trex does not show any result. How can I solve it?
    When candidates register theirselves on internet, they complete questionnaires that I have added in the apllication wizard.
    But the problem starts when I want to search candidates by the answers that they have complete in this questionnaire. So I select the criteria search candidate questionnaire, then I select the questionnaire and then the answer and I run the searh. I know that the results shown are always about others requisitions and not the one that I am doing the search. But in my case candidates are assigned in other requisition with the same process template so I do not know where is the problem, because other sort of search works fine. This is the only one that it does not work.
    In addition, I have run the report RCF_CHECK_SEARCH_SETTINGS but the result is that all the parameters are fine except that I have not implement the badi HRAHAP00_FOLLOW_UP_SES. May I have to implement?
    Moreover I have seen that when I select the answer to search, any operator (element of selection mask) is assigned but I have read that it is correct because I am using the search profile "int_cand" with the category "candidate_document" that it use in the mask search candidate_questionnaire.
    In conclusion, I don't know how I can solve this problem with trex? Any idea?
    Thanks in advance,
    Juanjo Garcin.

    I've already done it.
    Do you think this will help?
    I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

  • I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

    I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
    I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
    Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

    Sandra,
    See this Apple support document for information on reporting an issue with your iTunes purchase.
    http://support.apple.com/kb/HT1933
    B-rock

  • Using iDVD, I've no problem creating a slideshow, but I want to add three seperate sound files, in this case speeches I've got in iTunes. I want to create three individual buttons/sub menu to access them individually from the photos. Can anyone help

    Using iDVD I've no problem creating a slideshow, but am having problems trying to add three seperate sound files in this case three speeches that I hold in iTunes. I want to be able to access them individually and seperately from the photo slideshow. Can anyone advise if this can be done and if it can, how I go about creating the seperate menu and buttons.

    If you'd like to integrate the speeches with the slideshow, I'd do that in iMovie where you'll have more control over the timing.  Use chapter markers at the beginning of each speech so the viewer can jump to a particular speech (note that chapter markers advance the viewer to a particular spot -- the viewer keeps watching the rest of the video until the end of everything or until they use the remote's menu button).
    If you're just wanting the speeches to be on the DVD so people can listen to the speeches after seeing your slideshow, you could:
    - use iDVD or iMovie to make a "slideshow" with just 1 image matching the length of a speech.
    - create three submenus and use the speeches as menu music.  Here's a (random) video on creating submenus:
    http://www.youtube.com/watch?v=DlhQSb_D5kc
    John

  • Problem creating basic views while creating materials using idocs?

    hello,
    I am facing an issue while creating materials using idocs. The problem is that the basic view does not get created whereas other views are present. The function module used is idoc_input_matma01 and the basic idoc type is MATMAS03.
    Looking for help. Thank you

    Hi Madhu,
    Actually i recieve an idoc from PI containing data required for cretion of the material via an idoc. This idoc is then processed to create the required material.
    The material gets created with appropiate data in various tables(mara, makt) but when we view material in mm03 we cant see the basic data views.

  • Problem while creating PO using BAPI_PO_CREATE1

    HAI TO ALL
    I AM TRYING TO CREATE PO USING BAPI
    ORDER IS SUCCESFULLY GENERATED, BUT THE CONDITIONS WHATEVER I PASS IS ARE REPEATING ,
    EVEN WE CONFIGURED DEFAULT VALUES MAINTAINED IN TRANSCTION 'OMFI" AND MAINTAINED Default Values for Purchasing FOR PARAMETER IN PARAMETER TAB IN USER PROFILE,
    HELP ME...
    REGARDS,
    SN

    Hi Sid.
    I'm having this same problems on creating PO Service. Did you solve it? How did you do that?
    I'm using a PR and the Category is 'Y', and I cant find where is the problem.
    The tables that I'm passing to the BAPI_PO_CREATE1 are:
    POITEM/ POITEMX
    POACCOUNT/ POACCOUNTX
    POSERVICES
    POSRVACCESSVALUES
    Please, if you have any idea, let me know!
    Tks a lot!
    Renata

Maybe you are looking for