E-Separation Change Approver issue in HINUEADI

Hello All,
We are facing issue in Change Approver functionality in the report HINUEADI, if we want to change the approver in the E-Separation Approval process for any employee, we run this report by selecting Change Approver, and given FROM user id and TO User Id, after executing the report it is updating the table T77WWW_TEAAP but the work item id is not forwarding to the new changed Approver. and after the request is disappeared from the previous approver queue too.
Please let me know is there any workflow changes do we need to do for this to forward the work item from previous approver to the New Approver?
we have copied standard Work Flow template WS77900165 to custom and maintained in table V_T77WWW_EAALC.
waiting for your suggestions.
Thanks,
Srikanth.

Hi Srikanth,
Try this:
Go to Se16 --> Table: T77WWW_TEAAP
Find the existing Approver ID for whom you want to change to new Approver ID, now copy the Work Item ID.
Go to SWIA Tcode and hit the Work Item ID, now find the Sub-Work Item ID.
Now, go back to SWIA and hit the sub-work item id,
Select the 'Administrator Forward' and enter the desired Approver ID that you would like to forward the workitem and save.
Now, go to T77WWW_TEAAP and select the old Approver ID and by debugger you change to the new Approver ID and save.
Workitem will be now forwarded to the new Approver ID.
This works and same process can be used for Due clearance to change Task Owners ID.
Regards
-KP

Similar Messages

Change goods Issue date and delivery date

while crating Sales document through VA01
i want to replace goods issue date (VBEP-WADAT ) with my Z calender date.
so that delivery date(ETDAT) aslo should chaged automatically ( bcz iof the change in goods isuue date ).
how to achive this ?
i tryied in Program    program of MV45AFZZ/ MV45AFZB in the User Exists mentioned below:
1.     Form Userexit_Check_VBEP
2.     Form userexit_move_field_to_vbep
i was able to change goods issue date (VBEP-WADAT ) but not refleting in output screen,..
regards,
ramesh

Hi Venkat,
Even it did not update in my user exit when I update from VBEP-WADAT. So, I did back calculation (considering route lead time) and updated Delivery date field VBEP-EDATU. It is simple. I have given the sample code as below.
   if lines( xvbap[] ) = 1 and VBEP-ETENR = '0001' and            "Calculate RDD while the first line item entered
     vbap-route <> space and <<your GI date>> is not initial.    "Only when header RSD is filled
      select single TRAZTD into ws_traztd from tvro
            where route = vbap-route.
      ws_days = ws_traztd / 24 / 10000.
      if ws_days <> 0.    "Only when Transp. Lead time is maintained ( So, will not affect other entities )
         select single FABKL into ws_fabkl from T001W
            where WERKS = vbap-werks.
         CALL FUNCTION 'WDKAL_DATE_ADD_FKDAYS'       "Calculate as per Factory calender
             EXPORTING
               i_date        = <<your GI date>>
               i_fkday       = ws_days
               i_fabkl       = ws_fabkl
             IMPORTING
               E_DATE        = ws_date
              E_FKDAY       =
             EXCEPTIONS
                ERROR         = 1
                OTHERS        = 2
         IF sy-subrc = 0.
            VBEP-EDATU = vbak-vdatu.   "copy to the first line item
         ENDIF.
      endif.
    endif.    "Route days

How to make change in Issue list across all project sites?

Hi,
We all have issue list in our project sites. We need to add some values to some of the columns in that issue list. The requirement is we need these changes to reflect in all the new sites. Also how to make these changes reflect in current existing sites.
Can anybody suggest a way to achieve this. One thing that i am aware of is creating a new project site template and associating it with EPT but that still not solves the issue for preexisting sites.
Please help asap.
Thanks in advance.

Hi SpWrk
If you have already created some sites. You would need to apply these changes either Programetically (Powershell or C#) or Manually.
However, you can take the following approach to avoid this problem in future. (i.e. Your "future" changes will appear in existing sites too). I am writing the procedure breifly but let me know if you need more details on this
1) Create a content type (e.g. "Project issues" at PWA level)
2) Associate this content type with the Issues List in your site template as well any existing project sites. Make it a default content type for Issue lists. save your site template
3) Create all your custom columns in this new Content type (changing OOB issue columns can break your reporting)
4) Your changes to content type should reflect in future sites as well as existing sites (whereever the content type was appiled)
Regards
Hammad Arif EPM Advice Blog

SRM: "Purchase Order Change Approval " and "Invoice Approval"

Hi,
I would like to know the availability and details of the backend services for "Purchase Order Change Approval " and "Invoice Approval".
Any pointers ?
regards
Sachin

I want to know what are the Backend services exposed for the following processes :
Purchase Order Change Approval in MM
and Invoice Approval.

Disable "Change approver" in shopping cart approval

Hi all,
I need to deactivated "change approver" in shopping cart approval process, I'm working in SRM Server 550, it can be controlled trough an authorization objet in role or a configuration?
Regards,
José Luis D.

Hi,
Please check the BADI BBP_CHNG_AGNT_ALLOW.
Regards,
Masa

Approval issue very urgent

Hi Experts,
I knew to WF
We get the approval issue . In Ebuy of China, we have the approval workflow as go to the highest approver if the approval limit is over the default approver manager. That is User A have mgr B with limit 40,000 and mgr B have mgr C with limit 80,000. If raise a Shopping cart to 50,000, the shopping cart will go to Mgr C. User A need to add the mgr B as the first approver. But after all mgrs are added, and ordered, and back to Check status, the first 2 mgrs are disappeared. can u help on this issue?
Thanks & Regards
Vijay

Hi Nazeer,
The value of Tan(45) is beng wrongly calculated by ABAP because internally the data type for all the Trignometric functions are represented as Floating point numbers.
Please refer to this:
The results of the following functions have the data type f:
     Trigonometric functions: cos, acos, sin, asin, tan, atan
     Hyperbolic functions: tanh, sinh, cosh
     Exponential functions (base e): exp
     Natural logarithms (base e): log
     Logarithms (base 10): log10
     Square root: sqrt
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

How to change Approval mail title

Dear all,
I want to change approval sc mail title. So I changed Task 10008126. basic data-->work item text..
but still is old text after I get notification of shopping cart approval of email .who can tell me...how to active new text?
Thanks a lot.
Alice
Edited by: Alice Bush on Jul 8, 2008 11:03 AM

Hi.,
Yes you need to change the work item text(Task 10008126) only for custom title for approval work item of SC.After saving the chnages,just execute transaction SWU_OBUF.This will update the changes made at the task level and you should be able to see the changes.
BR,
Disha.
Do reward points for useful answers.

Purchase Order Approval Issue

Hi! Experts ,
I'm using SAP 8.81 PL05, We are sending PO's for Approval, Once the PO's got approved I'm Unable to do some changes , For all Approved PO's Row Level got blocked we can't change the Price,Project Code, TAX etc. I know SAP Released some Patch level fixing these types of Issues. Can any one help me which patch level we can send approval po's for re approval.

Hi KamalaKamalakKannan,
I think there's really no way for you to make changes for a PO that went through an approval procedure because that's the whole point of having one. I'm not sure of the fix, but what I can suggest though is GRPO or AP custodian to make the necessary changes if they make a "copy from" entry. I had the same problem before, and that's how we are able to make the necessary changes.
thanks,
richard

TRIP Workflow approval issue

Dear All
We have developed custom workflow for TRIP workflow, with single level approval of line manager.
We are raising Trip request using Transaction PR05.Workitem goes to line manager for approval in SAP inbox and
NWBC (SAP netweaver ) for approval.On approval by manager workflow is completed instead of further processing.
Reason for completion of workflow is Event BUS2089 CHANGE is created with event APPROVED.
Due to this CHANGE event current workflow instance is completed,as parallely condition for CHANGE is checked for workflow completion.
Kindly let us now this unexpected behavior of CHANGE event creation of BUS2089 on approval of trip by manager and any
steps to control this.
Thanks and Regards,
Aditya

Hi Aditya
You may want to retain CHANGED event wait step so that if the trip is changed outside the WF, the current instance, being redundant, gets completed.
For your case there can be two different approaches, depending how you have implemented the workflow.
1) Check who is the user triggering the event CHANGED in this case. Is the system catching the manager user name or the user name WF-BATCH. If it is WF-BATCH, it becomes fairly simple. You do not complete the workflow after WAIT for EVENt step, instead loop back to wait step for any possible changes later on (outside the WF)....you will get the user name in the event (_EVT_CREATOR)
2) If the username is that of the Approver, see if this works for you (Iam assuming that your approval is in one branch of the fork and the wait for event is in another branch of the fork (1 of 2 fork)).
a) Trap the Actual Agent of the decision in the approval branch
b) Trap the user triggering the COMPLETED event in the other branch
c) Compare the two - if they are same, do not execute the process control step to complete the WF instead loop back to wait step for any possible changes later on (outside the WF).
Not sure if this will work because there can be timing issues.....the Actual Agent of approval may not be written in one branch and the comparison happens in the other..... it's worth a try
Regards,
Modak

PA Budget Approval Issue

Hello Experts
Please guide me on the following issue.
I am creating a Project Budget for entire lifecycle of a project say from Oct-2010 To Dec-2012 period. And on submission of the same notification goes to approving authority. But even after when approving authority approves this budget status of this budget remains as 'In Process'. Expected to change status to 'Working'.
But when I am creating budget for same project only for period Oct-2010 To Dec-2010 and after approving the budget status is getting changed to 'Working'.
I shall be grateful if some body can help me in resolving this workflow issue.
Thanks in Advance.

Thanks a lot Dina
Can you please tell me on following doubts:
1. If my Project Budget is a non time phased, in this case can I generate and review budget accounting from Tools menu. If yes in which period these budget journals will be posted in GL?
2. If its not possible to post budget journals in GL for non time phased budget, then how the funds check would be exercised at the time of actual transactions? And is this budget is still a GL integrated budget?
Please clarify my doubts.
Thank you

MSS - Compensation Planning and Approval Issues

Hi Experts,
We are implementing MSS for one of our clients (only MSS) and face a few issues.
1. The Submitter is able to view and approve the Compensation plan for his reportee........instead it should be the submitters manager who should only be able to approve ie Compensation approval should be done by M+1 level but it is right now done by the manager himself. How can this be done? Any setting through which we can restrict this?
2. We would like to restrict the Compensation submission to the Managers only. While we are testing we found that one of us who is not a manager can still create and submit the Compensation change. We don't want this to happen so that even by error the MSS Role is assigned to a non-manager, he should still not be able to make any changes.
Any pointers will be highly appreciated.
Thanks and Regards,
Arun E V

Hi Arun,
Did you resolve your issue? what MSS version you are using for Compensation Planning and Approval, are you able to see employees for Approval in Planning Overview Application, even i am not able to Employees for Planning Overview Appliation, i am able to see employees in Compensation Planning Application only.
Please help me on this configuration for Planning Review of Compensation, is there is any IMG configuration is required for view employees, Approval and rejections through Planning Overview.
Please help me on this one.
Thanks in Advance.
Thanks and Regards,
Abhi.

T&E approver issue while trying to approve the request in SBWP

Hi All,
I am working with a T&E issue here. The problem is when ever the T&E approver trying to save the request submitted by the user in his inbox or try to change the expenses data its not allowing me to save or change any data. The message i get is " Trip has not been approved yet. Trip can not be changed".
When i open the request through SBWP(inbox), it will take me to PR05 screen where the user is trying to save. Even if i give SAP_ALL also its not working. Sometimes it thro P_ABAP Program SAPDBPNP with 2 is missing in ST01(i know its dummy nothing to do with this issue)
I am not sure whether its workflow or security. Its working fine in production and replicated the same roles in QA but no use. Any help highly appreciated and <removed by moderator>
Edited by: Julius Bussche on Aug 24, 2011 6:43 PM

Yes Martin, i have tried both in Dev and QA with ST01 traces and its giving me the same results. In the P_ABAP object we have used 3 programs in which one is custom program. In the trace it is reading the 2 standard programs but its not showing that its reading the custom Z program. Instead of that is showing the erro P_ABAP program SAPDBPNP with value 2 is missing.
Even if i add SAPDBPNP into P_ABAP its not working. I am trying all the ways before going to the developer. Thanks for sharing your thoughts.

Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

Hi Guys,
I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots.
1st Hardware Config:
Intel Core2Quad Q9450
4x2GB DDR2
MSI P43 motherboard
Ati Radeon x550 video card
Software used, that seemed important for me to mention:
NOD32 v4.2
Comodo Firewall 5.12
Chrome
Screenshot Captor
SpeedFan
Other mentions:
Aero is disabled, because I've considered that it's one of the causes.
So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
Intel Core i7 3770k
4x8GB DDR3
Asus P8Z77V-LX motherboard
Intel GPU integrated in the 3770k CPU
The problem just happened 2 times on this rig also, and the RAM was not even coming close to it's maximum capacity of 31.7GB. It was at ~20GB's.
Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
My suspects:
1) some desktop manager bugs, or other similar issue
2) video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think that it is at 256MB.
3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
4) Adobe Shockwave Flash - maybe this one????
I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
http://imgur.com/a/Mc8hI#4
Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
Same thing still happens on the new configuration. Please advise me.
LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

Hi,
First, please be ensured that you have installed the latest drivers and all the updates.
Then check whether this issue will not in
Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
Clean Boot mode.
In addition, try to create a new profile to see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support

I was wondering if anyone can help me with a jquery change() integration issue?

I have tested the following script on a simple html page on my computer and it workd perfectly:
However, when posting it to BC withing a template, for some reason the .change() alert gets copied 4 times. You can see it at the following link: http://www.bebemoda.co.uk/test-1?Preview=True
Not sure if this is due to interference form other scripts and am not able to figure out the problem.
Would anyone be able to helpn me solve this issue?
Thanks
<!DOCTYPE html>
<html>
<head>
<style>
div { color:red; }
</style>
<script src="http://code.jquery.com/jquery-latest.js"></script>
</head>
<body>
<select class="cat_dropdown" id="ShippingCountry" name="ShippingCountry">
    <option selected="true">-- Select Country --</option>
    <option value="AF">AFGHANISTAN</option>
    <option value="AL">ALBANIA</option>
    <option value="DZ">ALGERIA</option>
    <option value="AS">AMERICAN SAMOA</option>
    <option value="AD">ANDORRA</option>
    <option value="AO">ANGOLA</option>
    <option value="AI">ANGUILLA</option>
    <option value="AQ">ANTARCTICA</option>
    <option value="AG">ANTIGUA AND BARBUDA</option>
    <option value="AR">ARGENTINA</option>
    <option value="AM">ARMENIA</option>
    <option value="AW">ARUBA</option>
    <option value="AU">AUSTRALIA</option>
    <option value="AT">AUSTRIA</option>
    <option value="AZ">AZERBAIJAN</option>
    <option value="BS">BAHAMAS</option>
    <option value="BH">BAHRAIN</option>
    <option value="BD">BANGLADESH</option>
    <option value="BB">BARBADOS</option>
    <option value="BE">BELGIUM</option>
    <option value="BZ">BELIZE</option>
    <option value="BJ">BENIN</option>
    <option value="BM">BERMUDA</option>
    <option value="BO">BOLIVIA</option>
    <option value="BW">BOTSWANA</option>
    <option value="BR">BRAZIL</option>
    <option value="BG">BULGARIA</option>
    <option value="KH">CAMBODIA</option>
    <option value="CM">CAMEROON</option>
    <option value="CA">CANADA</option>
    <option value="CV">CAPE VERDE</option>
    <option value="KY">CAYMAN ISLANDS</option>
    <option value="CF">CENTRAL AFRICAN REPUBLIC</option>
    <option value="TD">CHAD</option>
    <option value="CL">CHILE</option>
    <option value="CN">CHINA</option>
    <option value="CX">CHRISTMAS ISLAND</option>
    <option value="CO">COLOMBIA</option>
    <option value="CK">COOK ISLANDS</option>
    <option value="CR">COSTA RICA</option>
    <option value="HR">CROATIA</option>
    <option value="CY">CYPRUS</option>
    <option value="CZ">CZECH REPUBLIC</option>
    <option value="DK">DENMARK</option>
    <option value="DJ">DJIBOUTI</option>
    <option value="DM">DOMINICA</option>
    <option value="DO">DOMINICAN REPUBLIC</option>
    <option value="EC">ECUADOR</option>
    <option value="EG">EGYPT</option>
    <option value="SV">EL SALVADOR</option>
    <option value="GQ">EQUATORIAL GUINEA</option>
    <option value="EE">ESTONIA</option>
    <option value="ET">ETHIOPIA</option>
    <option value="FK">FALKLAND ISLANDS (MALVINAS)</option>
    <option value="FJ">FIJI</option>
    <option value="FI">FINLAND</option>
    <option value="FR">FRANCE</option>
    <option value="GF">FRENCH GUIANA</option>
    <option value="PF">FRENCH POLYNESIA</option>
    <option value="GM">GAMBIA</option>
    <option value="GE">GEORGIA</option>
    <option value="DE">GERMANY</option>
    <option value="GH">GHANA</option>
    <option value="GI">GIBRALTAR</option>
    <option value="GR">GREECE</option>
    <option value="GL">GREENLAND</option>
    <option value="GD">GRENADA</option>
    <option value="GP">GUADELOUPE</option>
    <option value="GU">GUAM</option>
    <option value="GT">GUATEMALA</option>
    <option value="GY">GUYANA</option>
    <option value="HT">HAITI</option>
    <option value="VA">HOLY SEE (VATICAN CITY STATE)</option>
    <option value="HN">HONDURAS</option>
    <option value="HK">HONG KONG</option>
    <option value="HU">HUNGARY</option>
    <option value="IS">ICELAND</option>
    <option value="IN">INDIA</option>
    <option value="ID">INDONESIA</option>
    <option value="IE">IRELAND</option>
    <option value="IL">ISRAEL</option>
    <option value="IT">ITALY</option>
    <option value="JM">JAMAICA</option>
    <option value="JP">JAPAN</option>
    <option value="JO">JORDAN</option>
    <option value="KZ">KAZAKHSTAN</option>
    <option value="KE">KENYA</option>
    <option value="KP">SOUTH KOREA</option>
    <option value="KW">KUWAIT</option>
    <option value="KG">KYRGYZSTAN</option>
    <option value="LA">LAO PEOPLE'S DEMOCRATIC REPUBLIC</option>
    <option value="LV">LATVIA</option>
    <option value="LI">LIECHTENSTEIN</option>
    <option value="LT">LITHUANIA</option>
    <option value="LU">LUXEMBOURG</option>
    <option value="MG">MADAGASCAR</option>
    <option value="MW">MALAWI</option>
    <option value="MY">MALAYSIA</option>
    <option value="MV">MALDIVES</option>
    <option value="ML">MALI</option>
    <option value="MT">MALTA</option>
    <option value="MH">MARSHALL ISLANDS</option>
    <option value="MQ">MARTINIQUE</option>
    <option value="MR">MAURITANIA</option>
    <option value="MU">MAURITIUS</option>
    <option value="MX">MEXICO</option>
    <option value="MD">MOLDOVA, REPUBLIC OF</option>
    <option value="MC">MONACO</option>
    <option value="MN">MONGOLIA</option>
    <option value="MS">MONTSERRAT</option>
    <option value="MA">MOROCCO</option>
    <option value="MZ">MOZAMBIQUE</option>
    <option value="MM">MYANMAR</option>
    <option value="NA">NAMIBIA</option>
    <option value="NP">NEPAL</option>
    <option value="NL">NETHERLANDS</option>
    <option value="AN">NETHERLANDS ANTILLES</option>
    <option value="NC">NEW CALEDONIA</option>
    <option value="NZ">NEW ZEALAND</option>
    <option value="NI">NICARAGUA</option>
    <option value="NE">NIGER</option>
    <option value="NG">NIGERIA</option>
    <option value="NF">NORFOLK ISLAND</option>
    <option value="NO">NORWAY</option>
    <option value="OM">OMAN</option>
    <option value="PK">PAKISTAN</option>
    <option value="PW">PALAU</option>
    <option value="PA">PANAMA</option>
    <option value="PG">PAPUA NEW GUINEA</option>
    <option value="PY">PARAGUAY</option>
    <option value="PE">PERU</option>
    <option value="PH">PHILIPPINES</option>
    <option value="PL">POLAND</option>
    <option value="PT">PORTUGAL</option>
    <option value="PR">PUERTO RICO</option>
    <option value="QA">QATAR</option>
    <option value="RE">REUNION</option>
    <option value="RO">ROMANIA</option>
    <option value="RU">RUSSIA</option>
    <option value="RW">RWANDA</option>
    <option value="SH">SAINT HELENA</option>
    <option value="KN">SAINT KITTS AND NEVIS</option>
    <option value="LC">SAINT LUCIA</option>
    <option value="PM">SAINT PIERRE AND MIQUELON</option>
    <option value="VC">SAINT VINCENT AND THE GRENADINES</option>
    <option value="SM">SAN MARINO</option>
    <option value="SA">SAUDI ARABIA</option>
    <option value="SN">SENEGAL</option>
    <option value="SC">SEYCHELLES</option>
    <option value="SL">SIERRA LEONE</option>
    <option value="SG">SINGAPORE</option>
    <option value="SK">SLOVAKIA</option>
    <option value="SI">SLOVENIA</option>
    <option value="SB">SOLOMON ISLANDS</option>
    <option value="ZA">SOUTH AFRICA</option>
    <option value="ES">SPAIN</option>
    <option value="LK">SRI LANKA</option>
    <option value="SR">SURINAME</option>
    <option value="SZ">SWAZILAND</option>
    <option value="SE">SWEDEN</option>
    <option value="CH">SWITZERLAND</option>
    <option value="TW">TAIWAN</option>
    <option value="TJ">TAJIKISTAN</option>
    <option value="TZ">TANZANIA, UNITED REPUBLIC OF</option>
    <option value="TH">THAILAND</option>
    <option value="TO">TONGA</option>
    <option value="TT">TRINIDAD AND TOBAGO</option>
    <option value="TN">TUNISIA</option>
    <option value="TR">TURKEY</option>
    <option value="TC">TURKS AND CAICOS ISLANDS</option>
    <option value="UG">UGANDA</option>
    <option value="UA">UKRAINE</option>
    <option value="AE">UNITED ARAB EMIRATES</option>
    <option value="GB" selected="selected">UNITED KINGDOM</option>
    <option value="US">UNITED STATES</option>
    <option value="UY">URUGUAY</option>
    <option value="UZ">UZBEKISTAN</option>
    <option value="VE">VENEZUELA</option>
    <option value="VN">VIETNAM</option>
    <option value="VG">VIRGIN ISLANDS, BRITISH</option>
    <option value="VI">VIRGIN ISLANDS, U.S.</option>
    <option value="YE">YEMEN</option>
    <option value="ZM">ZAMBIA</option>
    </select>
<div id="shippingdest" style="width:30%; color:#F33"></div>
<script>
    $("#ShippingCountry").change(function () {
          var str = "";
          $("option:selected").each(function () {
                                 if ($(this).text() !== "UNITED KINGDOM")
                                           $("#shippingdest").text("");
                               str += "Please note that delivery charges do apply on orders shipped outside the UK. After your order has been processed, we will contact you with a specific delivery quote based on the items you have purchased.";
          $("#shippingdest").text(str);}
                      else
                                $("#shippingdest").text("");
        .change();
</script>
</body>
</html>

Hello LondonHK,
It looks like your each function is what is messing you up. It is trying to go through each drop down list once you change the ShippingCountry drop down. So since there are 5 drop downs the code wouldn't work as you wanted.
I've made a jsfiddle with a little simpler code that should do the trick for you:
http://jsfiddle.net/chaddidthis/nw6cY/
Let me know if that works.
Hope this helps,
Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

Change Log issues - Post Upgrade

Hi Experts,
We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
Thanks and Regards,
Jay

HI JayaPrasad,
Chek the note : 1059171 which is related to Change log,
I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
Regards,
Srinivas

E-Separation Change Approver issue in HINUEADI

Similar Messages

Maybe you are looking for