E4200 - Self Bricked in 8 days

Bought this router 8 days ago locally to replace my WNDR3700v2 which the 2.4ghz band started going flaky. This router was good for about 3 days then the wireless started flaking in and out. I logged into the firmware and there was an update so I figured that may be the issue. I selected its online update option as I assumed that would be safer then waited, and waited, and waited. After 10 minutes of waiting for the wireless to appear, I checked a direct connected computer, absolutely nothing, and after putting the WNDR back on and searching come to find theres no way to bring it back short of cracking the thing open, voiding any warranty, and using some crazy looking cable directly on the board.

If I relate your issue then the above mentioned solution justifies the troubleshooting steps to be taken, however, in addition to that i would also like to suggest you to try to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
Once you have successfully reset your router, you need to reconfigure the settings again according to the ISP setup.
As far as wireless is concern can try the following settings:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Here is the link for optimizing network performance:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=10a5d4ce29134f12baf246b10084ac41_6861.xml&pid=80&r...

Similar Messages

Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser

Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

Computer is REBOOTING its self several times a day.

After I restored system I updated everything, and a few PROBLEMS, each in on different post.
It keeps REBOOTING its self, several time a day.
HP Pavilian a465a desktop, with MS Windows XP.
Please help
Granny72

First to find the STOP code that is rebooting the system, i need you to reboot your system and tap F8 repeatedly before the Windows XP splash screen. And select "Disable Automatic Restart on System Failure", then wait for your system to randomly reboot and report back here with the STOP Code.
HP Elite h8-1070T Intel Core i7 2600 12GB RAM AMD Radeon HD 6850 1GB Windows 8 Professional 64-bit (Gaming)
HP DC7900CMT Intel Core 2 Duo 3Ghz 4GB RAM Windows 8 Professional 64-bit (Workstation)
HP XW4200 Intel Pentium 4 HT 3.6GHz 4GB RAM Windows XP Professional (Home File Server)

WVC200 bricked after 5 days ?

Hello,
I bought a new WVC Camera with the nice PTZ feature the other day, managed to get it up and running but after deconnecting it to set it in it's final location and trying to start it up again I no longer seem to be able to connect threough any more.
So I applied a reset, reconnected it with RJ45 and it now now longer displays the ethernet LED. And indeed my router has nothing in the logs about a new device trying to connect.
A case for RMA or is my reset bogus? Insert a pin in the reset hole and count up to 10.
LEDs don't blink or anything BTW.
Tried holding reset while powering up and all LEDS will light up but then it seems to remain blocked in this state
All help much appreciated

Thanks all for your guidance.
Well RMA it will be.
Interesting experience though due to the fact that camera was purchased in US. The person I finally got through to at the Support center in NL after asking me the usual questions, would not issue me an RMA when he discovered Camera was purchased acros the pond. Needed to call the Cisco Support in US which by the way are a truly professional crowd, explained my problem and received the needed RMA by email 10 mn later with ship address => .... Netherlands
Anyway, not sure the case is closed just yet. I'll ship out this Monday and see how long it'll take to receive a new camera.

5s self bricked. Curious if this has happened to anyone else.

I had just talked to my wife, took a photo, and let it time out to sleep. It never woke up, and I had to have it exchanged. No previous issues at all.

Polls and surveys are prohibited by the TOS. If you want to know if it happened to anyone else, search the forums or use google.

WD Disk started to self eject everytime

Hi guys.
I´m Having issues with my 2010 13" Macbook Pro 7,1.
I made the OWC Data Doubler mod almost 1.5 years ago.
Since the mod everything has been running butterly smooth.
Disks:
OS : OWC ELECTRA 6g 128Gb SSD
MEDIA: WD Scorpio Black 750Gb 7200RPM HD
Once i installed Mavericks the WD Disk started to self eject everytime... i reformated both disks.. reinstalled mavericks via thumbdrive (CleanInstall) and the problem still persist.
I thought the problem was the disk... so i mounted it on a external enclosure and ran a backup... it ran pefectly.
So. My other guess was the SATA Cable on the macbook pro. i order one vía iFixit with another HD just in case...
But my hopes of fixing it are still very low...
Any advice from someone with a similar problem or with knowledge of this kinds of problems?
(Sorry for my english)
<Re-Titled By Host>

Well,
i guess it's totally Apple's problem.
I'm running WD Green 3TB Internal SATA HDD on MacPro 5.1 and it self ejecting spontaniously from day 1...
Also I turned off and then changed to max head parking value..
Still ejecting and ejecting...or after 1 mounth of perfect work...or after 1 day(
So it really looks like WD-Apple conflicting..
If Apple comment all these topics with the same problem on discussions board, would be really great,
but they won't for sure
Keep hope))

How do you make an exchange account as the default?

I had an iphone 5 but that became bricked a few days after installing IOS 8 on it. So I went back to an older iphone 4 until the end of October when the 6 plus is due to ship (hopefully sooner though).
On the iPhone 4, there is no way to make my work Exchange account the default. For mail I can only mark gmail or icloud as a default mail account. However for Calendars, my work e-mail is the default. On my previous phone, the 5, my work exchange email was the default.
Currently I cannot send a photo from the photos app and make it from my work email. I can view and reply to work email messages, but its just not possible to make it the default account. The account is pushed to the devices via MaaS360, but so was the account on the iPhone 5 (and all other devices accessing corporate credentials).

Here is the KB 20098 article URL for setting up an Exchange Active Sync. You need to follow theses steps to set this up on your device. Remember that a certificate needs to be added to the device; either a self-signed or privately issued certificate.
http://kb.palm.com/wps/portal/kb/na/pixi/pixi/sprint/solutions/article/20098_en.html#N100D1

Why doesn't my iTunes content show in Library? Also, How can I sync music purchased on my iPhone to my PC's iTunes Library?

I have been having several annoying problems with iTunes for the past several months...
1) Library content not showing after folder relocation:
First, in order to free up space on my C drive, I wanted to relocate my iTunes folder to a new 1TB hard drive (F) I installed. I did so according to Apple's instructions online, but despite setting the new location to be my library in my iTunes preferences, the content never shows up in the iTunes Library in the actual application. This is my most annoying problem, so please someone help me to resolve this! Thanks.
2) Albums purchased on iPhone 5 only sometimes sync with PC
I have purchased a few albums on my iPhone 5 and only some of them have synced to my PC when I connect my iPhone via USB. They don't even appear under the "Purchases" playlist in the iTunes Store. So, I have content right now on my iPhone that I can only access via my iPhone, and some of the music has gone missing. One or two tracks from albums are not there despite me purchasing full albums at a time... This is also pretty dang annoying and prevents me from trying a solution I'd looked up to fix my third problem...
3) Album artwork mixed up/mismatched on iPhone 5
This is pretty self-explanatory. Ony day my album artwork decided to play musical chairs. So now, for example, it shows Andrew W.K.'s bloody face when I listen to Zedd, and shows Skrillex when I listen to Symphony X. I read online that if you desync your content on you iPhone so that none of the music is there any longer, and then resync content from your computer, it will fix this issue. I'm hesitant to apply this solution until I can fix the ones above though, because I don't want to lose content that I have legally paid for.
My final problem:
4) Apple charges $20 for a support phone call for iTunes
Seriously, WTH? I hope the community can help me out. Thanks all!

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

How do I mass delete email from Trash folder?

Is there an easy way to mass delete the emails from the trash folder?

In your settings>mail>account>advanced, there is a way you can set it to self delete after 1 day. This is the earliest setting to self delete the mails. If you need to delete all of them right away. Just open one of the mails and press the trash can icon at bottom. It automatically opens the next mail and you can just sit there thumbing the trash can until all are gone. Works for me, both ways.

Monitoring user logins and amount of time logged in.

I presently have an open directory master with several Mac Pro's authenticating against it. The owner of the Mac Pro would like to do billing to the other departments based on who was logged in and the amount of time they were logged in.
Normally the "last" command would be perfect for this but with the removal of the wtmp file in 10.5 the last command is flaky at best. I will restart its self multiple times per day or not at all for a month so it is hard to write a script to pull the data out of it.
Does anyone know of a way in 10.5 and higher to find out the type of information that the last command displayed, IE who logged in, what time they logged in and what time they logged out.
I need this information for the Mac Pro's but can pull the information from the open directory server if there is a way to get it from their.
Does anyone know where the last command data is being logged since the removal of the wtmp file.

neither of them seem to give me the login and log out times like the "last" command does. Is there not anyway on the open directory server to pull this data?

Application Server - Does it realy work?

We recently purchased IAS version 9.0.2. We have it running on a dual Xeon 2 Ghz machine with 4gb of Ram, and a very fast raid with WIN 2k SP4. (A pretty beefy server). We have both the infrastructure and Mid Tier on the same box. We have it running as a test environment with only 3 people hitting it (Please keep in mind ONLY 3 people)
1 - We had to apply 3 patches just to make it function properly.
2 - The Application server constantly hangs.
3 - Within portal if you want to hit an external database, you have to create synonyms for every thing you wish to use on the external database (Views, Tables, Etc.)
My points are:
1) Does Oracle Beta Test at all!?
2) Build a Self-Service Portal in Days, Not Months (Quoted from the OTN web site) - VERY Un-realistic!
3) $40,000 for this software in its current state is INEXCUSABLY!
If ANYONE at all has had 100% success/satisfaction running IAS Enterprise on a win 2k platform. PLEASE let me know. I Hope that I'm not the only one going through these problems!

We currently have it running in Win2k on Dual P3 1.4GHz with 2GB of Ram with the Infrastructure and Mid-Tier on the same box. We started having problems with the Report Server hanging but still able to use the Portal, this was happening every 2-3 days. We modified the init.ora file to up the number of processes from the default to 300.
Since doing this the machine has been up and running reports for a month. :)
This has also speeded EM up by 20% not sure why but i am glad that it did.
I only wish Oracle support could have recommended this to me in response to my TAR instead of me having to mess about.
From the sound of the spec of your box you should get better performance than i get and mine is definitely acceptable.

160 GB external USB HDD won't mount in 10.4.9; does in 10.4.0

I'm using a Beige G3 (though I don't think the model is the issue).
I know there's nothing wrong with the drive whatsoever, because it mounts on PCs, and it mounts when booted from both other hard drives on the system, on Mac OS 9.2.2 and Mac OS 10.4.0.
I know it used to mount on 10.4.9, too. I thought maybe when I installed a 4-port USB 2 card things would resolve, but they haven't.... so I expect it's a driver (extension) issue.
I deleted a bunch of extensions a while back that I was sure I didn't need... I suppose it's possible I deleted one vital for USB HDD support on the HDD using 10.4.9, only I don't know which it would be... things were self-explanatory in the days of OS 9, not so much with OS X, it would seem.
I didn't notice it until fairly recently since I'd been networking to the external HDD via another computer as the built-in 10BT was sadly faster than the USB 1.1 card I had installed prior.
Anyway.... since I assume this is an extensions problem (it says when I turn on the drive that a certain extension is missing, but I can't remember which), can anyone tell me what particular extension it is that enables USB Hard Drives?
By the way, USB flash drives mount and run at USB 2 speeds just fine. Thanks.

It's an adaptec card, but that's actually not the issue; it stopped working on the old USB card where it'd worked just fine before, whilst still working when I booted into 10.4.0.
Once upon a time it was working fine on both 10.4.9 and 10.4.0.
It now says "AppleXsanFilter.kext" was installed improperly and cannot be used" when I start up the drive. It knows it's there, it just can't access it. It then says "device was improperly removed" when I shut off the HDD.

US / CAN Workshops -- feedback?

As announced at the Congress, the North American UA program will be offering workshops at three locations in June and July. The date and locations below are firm. The topics taught at each location and the class length are still flexible -- we would like your feedback on this. Independent of this discussion thread, we are having similar conversations with workshop instructors and curriculum developers. Once finalized, the details will be published on the UA Events page in the UAC Welcome Center.
Please note: these workshops are only available to faculty actively using SAP software in their university curricula, as part of their campus full University Alliances program membership (if your school is interested in joining, see program info on the UAC Program Overview page (https://www.sdn.sap.com/irj/scn/overview)
Based on prior feedback, our goal was to ensure that workshops were the right length for necessary knowledge transfer - not automatically one week long, so you'll see a combination of 1 day, 2 day and 5 day sessions. The self-contained topics (1 day courses) will be offered via distance learning to save you travel time & expense. In addition to our traditional course topics, we will also be announcing monthly webinars designed to introduce best practices for successful UA initiatives and new curricula.
Week 1: HEC Montreal, June 8 - 12
SAP Introduction - 5 days
HEC Business Simulation - 5 days
Business Intelligence - 5 days
Business One - 2 days
Week 2: CSU Chico, June 22 - 26
SAP for Retail - 2 days
Accounting - 5 days
Business Process Integration - 5 days
Customer Relationship Management - 5 days
TERP10 train-the-trainer - 5 days
Week 3: UW Milwaukee, July 13 - 17
SAP Introduction - 5 days
SAP NetWeaver - 2 topics, 2 days each (ttl 4 days)
Supply Chain Management - 5 days
Human Capital Management - 5 days
Distance learning: all 1 day long, dates TBD
Business Intelligence (Business Objects content only)
Solution Manager
Flya Kite
What are your thoughts?
Best,
Heather

The issue with July 6 - 10, is that faculty would need to travel on the 4th of July weekend (Sunday, July 5th). Historically faculty haven't liked that - and flight costs tend to be more expensive and airports are busy. We've gotten fairly low attendance when we've tried this in the past.
With the golf tournament happening through July 19th, that night will also be very expensive in local hotels, so that pretty much eliminates July 20 - 24th since there will be several classes that need to begin first thing Monday morning to cover the content.
That leaves us with a couple of choices.
1. We could consider a Tuesday - Saturday (July 7 - 11) or Tuesday - Saturday (July 21 - 25) workshop (assuming that UW Milwaukee could support a Saturday class and instructors are able to teach on Saturday). That would eliminate the holiday weekend travel since people could fly in on Monday; or the later week would avoid the higher hotel prices.
2. July 27 - 31 that had been proposed in an earlier post. This feels a little late, but it is only 2 weeks later than we were originally thinking for the Milwaukee event.
Any preferences?
Heather

Superimposed graphic pops

I've just spent an hour on deadline trying to figure out why a superimposed text layer (sorry, Connected Clip) exported from Motion as ProRes 4444 pops when an underlying clip on the main vision layer (it's not a track!) starts to fade up from black. So the title starts to fade up first, then the pictures beneath, and it all renders and plays fine in an FCP X ProRes 422 (HQ) sequence (sorry, Project) until... I export (er... Share) it, natively as 422 (HQ).
Then in the output Master File on the first frame of underlying vision, when its opacity is 0, the still-fading-up hard-baked text above pops. I've tried both rubber bandng and adding a dissove (where I began), tried changing composite modes, trashed render files and re-rendered and the result is the same. Pop! like a weasel.
But I've solved it. By exporting the ProRes 4444 clip from QT Player as dear old Animation, 8 bits and all plus alpha, it now works fine. Seems all 64 bits of FCP X are not enough to successfully deal with its own hero codecs. ProRes 4444, used for its alpha, on top of ProRes 422 (HQ) and all Hades breaks loose. So I now have 6 deliverables - including a lengthy Blu-ray encode - to make again.
<rant>
I had given FCP X credit for a rapid rise to adulthood but I was wrong. It's the wrong tool for file-based deliveries - don't even mention tape. It's just not predictable enough to use for mastering. Popping text, audio channel attenuation, slippy slidy magnetic unlockable timeline, with a dumbed down manual... quick and dirty for a sports channel, sure. Film, DCP, TV with standards - no.
Resolve 10 is now out and even as beta it seems a good deal more sensible than this rogue app. A few more years gurgling in its paddling pool for this one. So from now I plan to master in Resolve.
</rant>

Geez Tom, who's sniping now? You didn't need to read this post, much less take the time to reply.
ProRes 422 (HQ) 1080/23.98P, with a layer rendered from Motion with pre multiplied alpha, which previews fine, renders fine and produces a master file with a level/opacity change that affects only the upper layer, on the cut, when the lower layer is at 0 opacity, as it heads for 100% over 24 frames.
But you're right, I didn't come here to ask a question, that's why my post isn't marked as one. I came to make a point, for the benefit of others who may rely on FCP X to pay their bills in lieu of some other tool. Pardon my negativity - is unqualified happy clappy endorsement the only stance allowed here? How times have changed since v1.25!
I'm sure a dedicated tiny team are working their butts off in a company that now makes phones for a living, to keep the Pro Apps fire burning. They deserve our full support, and any critique of the app should not be taken as disrespectful or heretical. But in a company as opaque as Apple, it's up to us to forewarn one another when things are amiss.
Take the issue with mono stems - a standard deliverable from a mix, to be combined with FCP X's stunningly beautiful pictures for output to anything, except they emerge 6dB undercooked. Now that's a niche issue, hardly worthy of note - but when you're not putting your show out to a deck with meters you have to trust that the app isn't messing with stuff you're not really in a position to monitor as it happens. When it betrays your trust, that's significant.
We've all invested heavily in FCP's learning curves over the years, but its orientation has changed and it's harder to trust FCP X to do the things it claims to be built for - file based delivery - when timelines slide around, source timecode is obscured, TC fields can't be copied - all things that matter when you're outputting a show you didn't necessarily cut yourself, trying to hold it in one piece to create deliverables. And whatever happened to reference movies? Everything's a self-contained render these days, even if all you want is quick a ref you can strip some audio tracks from or truncate for a DVD encode. QuickTime Pro gets a lot of use.
FCP X is a great starting point - I'm not sure it's a great finishing point when elements are coming in finished form from other places. Blew away half a day on this one. For your respectful guidance only.

IP Profile - 0.18 mbps dl speed.

I have been having issues with broadband recently after moving the HomeHub several times and reseting etc. I have been getting in the range of 0.18 mpbs to about 0.56 mpbs.
After reading on this forum about others experiencing this problem I believe it has something to do with IP Profile being reduced as the hub thinks there is a line fault.
Is this correct and will it most likely resolve it self after a few days of a stable connection? I just wanted to clarify this.
Thanks.

Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

E4200 - Self Bricked in 8 days

Similar Messages

Maybe you are looking for