E609n Wireless Printing

I have just setup my printer for wireless printing. I am able to print from my Iphone and Ipad via the ePrint app properly. I am also able to print test-pages via my laptop through the HP Solution Center. In My Devices the printer shows up as Ready.
Despite being able to print test pages from my computer, I cannot print from any other application. I cannot print from Google Chrome, Word, or even an Adobe PDF. The printer is definitely connected and ready. I am not sure what is going wrong here.
Anyone else experienced this issue and have an idea of what to do? Thanks for any help you can give!

Thank you for clarifying.
Let's try the following and check if that may help:
Run the following tool by selecting Fix Printing:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Are the test results OK or not? will the tool print a test page or not?
Also click the top NEtwork menu and select Troubleshoot firewall to ensure the Indows Firewall may not be activated..
Run and check using the following tool and check for any difference:
http://support2.microsoft.com/mats/printing_problems/en
Right click the printer icon and select Printer Properties, then open the Ports tab - what port is being used by the printer?
Open the Control Panel > Programs and Features and search for HP - what applications are listed?
Have you installed the latest software for Windows 7 from the web or may used the original CD?
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • My HP officejet 6000 E609n wireless does not print on envelopes.

    My HP officejet 6000 E609n wireless does not print on envelopes.  When I send an envelope address from the Microsoft Word envelope app, the envelope loads and then it  is send through the printer without printing on the envelope.  If instead of loading an envelope I load a plain sheet of 8x10.5 paper it will print the address as it should (side ways and on what would be an envelope).  I have had no problem printing envelope to my old DeskJet 930C with this Word envelope app.
    I load the envelopes without the 8x10.5 paper and the paper guide moved over to the edge of the envelopes up which are against the right side of the load table as indicated on the tray guide.  

    After many frustrating and fruitless attempts to solve this problem, including updating the drivers and following so many bits of advice from so many sources including contacting HP customer services by phone and email (who have not, so far, shown the courtesy of acknowledging my enquiry), I seem to have overcome the problem by cutting a piece of A4 paper along its length to a width, which when added to the envelope’s height, equals the width of an A4 sheet. For example, I use DL envelopes which have a nominal width of 110mm so the width of the piece of paper cut from A4 (which is 210 mm wide) is 100 mm. This strip is then temporarily attached to the envelope by piece of low tack tape (such as masking tape) running along and joining the paper and the envelope tabs. I feed this assembly of strip and envelope into the printer in the default position, (i.e. the envelope on the right hand side of the tray, face down with the sealing tabs on the left). The printer seems to treat this assembly as a piece of A4 and prints the address etc on the envelope correctly. The envelope is then easily detached from the tape without damage and I have found that this works many times as sufficient tack remains on the tape. I know this sounds a little complicated but it soon becomes a simple task.
    The HP Officejet 6000 printer has previously worked splendidly, printing envelopes from the Word 2007 envelopes function running on XP but has only recently malfunctioned since changing to Windows 7. For the record, I have also tried to print envelopes using the Word compatibility mode without success.

  • Cannot find hp officejet 6000 e609n wirelessly

    Cannot find hp officejet 6000 e609n wirelessly. URL: http://0.0.0.0 Network Status: Offline. Active Connection Type: None

    IP address of 0.0.0.0 means it is not connected to your wireless network.
    Run the Wireless Setup Wizard from the front of the printer (in the Network menu).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Officejet 6000 wireless printer

    I want to print to my (E609n) network printer from my IPad. The printer is configured as a network printer with a eithernet cable to my Westell Model 7500 router. My desktop is wired eithernet and it prints OK. My HP laptop is wireless and it prints OK there also. When I check for printers via the IPad, no printers show up. I did check and HP didn't have the Officejet 6000 listed as AirPrint capable. I there a workaround to this, or an app avalible to allow printing to this printer from the IPad?

    Hi Lon001,
    This is probably the document you were referring to:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03722645&lc=en&product=3866949&tmp...
    The ePrint mobile app, the app HP provides for Apple mobile devices does not appear to support this model printer.
    I was an HP employee.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP AIO Remote shows wireless printer offline when it is online and can print to it.

    HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly.  How can I get it to recognize my wireless printer is online wirelessly?  AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.

    Hi rpmcintyre,
    Thank you for the additional information.  I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
    I have two different documents for you.  The first one is How to Use the HP AiO Remote App for Windows 8.  It has a FAQ section at the bottom of the document with trouble shooting steps.  I have also included the Supported Printers for the HP Scan and Capture App.
    If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP webservices tab not available when using HP Jetdirect 2700w wireless print server

    I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
    I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
    However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
    On the product website for the wireless server, it clearly states that this is compatible with eprint services.
    What am I doing wrong.
    Arjun
    HP Laserjet Enterprise 500 m551 dn color laser
    HP Jetdirect 2700 w wireless print server
    Win 7 Ultimate x 64
    Netgear WNDR 4500

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Jetdirect board here:
    http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

    Hello Guys:
    After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
    I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
    First install the following drivers:
    1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
    2) After that Go to Server Preferences, Double click on Print/Fax.
    3) Click on the "+" sign, select Line Printer Daemon - LPD
    4) In the Address field, enter the IP address of your print server.
    5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
    6) The Name field should automatically be populated.
    7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
    8) Click on Add
    And now open up text edit or something and you should be able to print.
    let me know if there are any questions.

    Try Repairing permissions (Disk Utility). Then restart, then add again.
    What do you mean by the printer doesn't show up - the driver (print using:)?
    You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

  • I have an wireless printer and a new wifi router. I have set the printer and iPhone / iPad correctly to the new router but when i try to print it won't recognise the air printer. Help. All was working fine on my old router

    I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly  to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!

    Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.

  • Wireless printing to Canon MX310 fails using D-Link Router - Can't Connect

    I recently bought a D-Link wireless router (320), which supports wireless printing and I am trying to set it up to work with MBP. I set it up to run with Windows XP and it works fine with no problems, but with my MBP it won't work. Here is a screen shot showing the XP set up and the printer server info from the router (bottom).
    http://img338.imageshack.us/img338/1645/printerq.jpg
    From this, I've been using the following information to add the printer,
    Protocol: HP Jetdirect - Socket
    Address: 192.168.0.1
    Queue: lp1
    The printer shows up as idle in the printer selection menu. When I print it goes through the following messages,
    Connecting to Printer...
    Printer Online...
    Printing...
    And then the queue clears itself as if it printed, but nothing ever comes out of the printer. At first I assumed it was a problem with the router, but when I tested it with Windows it doesn't have any hang-ups.
    Any help would be appreciated with this, as I've read several posts and tried all recommendations but nothing will work. I'm also curious if I have the "Queue" in the printer dialogue right, or if it should be 9100. Thanks in advance!

    Based on your Windows port configuration, your Mac printer queue configuration is reasonably correct. Although based on your Windows port configuration, you don't seem to require a queue name of lp1 - this would normally be required for LPD connections.
    Your issue will be with the driver used. The Canon Mac drivers cannot be used when you have the printer connected to the USB port of a wireless router or print server (although the exception to this rule is an Airport device). When you have the printer connected via USB to a router or being shared by Windows, then you need to use a CUPS-based driver like Gutenprint or PrintFab (yes I know the Canon driver says CUPS but it is not true CUPS).
    The Gutenprint tends to be the preferred driver because it is free, however your MX310 is not listed as a supported model so you would have to experiment with using a model that is supported and this can waste a lot of time and ink/paper.
    PrintFab (www.printfab.net) costs 49 Euro but it does support your MX310. A trial version is also available so you could see if the printer does work before making a purchase.
    One final note. For your Windows queue you don't need to add the colon 9100 after the IP address. The fact that you have selected RAW and have 9100 set for the Port Number is adequate.

  • Can not connect All in one 209b to new router for wireless printing....

    Have an HP laptop and All in one priner 209b.  All was working fine, wired and wireless printing.  Then we had to upgrade our ATT Uverse router.  Everything works...even wireless laptop and printer when connected to laptop.  However, can't get printer to printer wireless since it has the old router info.  I used the disk but when it asks to you to pick the printer, I choose the printer but it says printer now found ??? what ???? and this is with the cable connected.  I do not have the wizard on the touch screen but I did reset to factory settings hoping it would load new router info but it does not.  How do you manually enter router into for wireless printing.  Is it best to delete the printer and reinstall as new...wired and then wireless ???
    I am about to call an outsite company and pay the outrageous charge as the help on HP is not working.  Thanks

    Try this utility:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Can not connect my wireless printer to the new router.

    Can not connect my wireless printer to the new router.

    Can you please provide details:
    1.  The make and model of printer
    2.  Make and Model of Wireless Router
    3.  Is your printer connection wireless to router or a cable to PC
    4.  What have you done or attempted to do to establish a connection?
    5.  Any further info to assist

  • How do I connect a wireless printer with my ipad 5.1?

    How do I connect a wireless printer to my iPad?

    If its listed as 'airprint enabled', then you can follow the steps in this article:
    http://support.apple.com/kb/HT4356

  • Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

    HP - Photosmart e-All-in-One Wireless Printer  (CN731A)
    Went through setup on Windows 7 64-bit, printed the test photo, came out great.  Thought everything was good to go.  Later, when trying to print a document, it wouldn't print.  Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there.  I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed.  This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer.  I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo?  Any ideas would be appreciated!

    Hello,
    Try the below steps ..
    While the printer is ON, Unplug the power cord from back of the printer.
    Disconnect all the cables that are connected to the printer.
    Wait for 30 seconds.
    Plug in only the Power Cord. ( Printer would Power on ).
    Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges  or the Printer .
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How do i connect my macbook air to a wireless printer as there is no cd slot

    I have a wireless printer and it has a CD to insert into the computer to connect it but i have a macbook air....and therefore no CD slot. what can i do? thanks!

    lindsay397 wrote:
    I have a wireless printer and it has a CD to insert into the computer to connect it but i have a macbook air....and therefore no CD slot. what can i do? thanks!
    This might help:
    http://support.apple.com/kb/HT3500

  • Wireless printer does not work after update

    I have VM fusion running on my MAC with a wireless printer enabled on my MAC. Prior to the security update, the printer worked seamlessly. Since the update, I can no longer "see" the printer in Windows XP. Any suggestions?

    More information.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

Maybe you are looking for

  • All of my apps were deleted from my apple id

    Somewhere between updating my phone, changing my gamecenter email and password, or transferring pictures from my phone to my computer, my apps were deleted from my apple id. I'm not talking about deleted from my phone, I mean from my apple id. I am 1

  • Using sql in the filter expression

    For a project I need to use a filter which is a construction with BETWEEN dateFrom AND dateTo. But the user does not choose these datevalues, he chooses timePeriods which have a unique startDate. The dashboard prompts are populated with these timePer

  • Failue to load database informaiton in Crystal Reports XI - Foxpro table

    I am using Crystal Reports XI and have run into a very unusual problem.  I have a report (actually several reports) that pull data from a Foxpro .dbf table.  The table and the reports are located on a shared drive.  There are 4 end users, all of whom

  • Performance and wrong internal priorities

    Ligthroom has very good functions. But with big databases the performance is bad or better the internal task priority is wrong: I have a 1 1/2 year old Windows XP pc with 4 GB RAM. For example: I have build a small database (name it SMALL_A) with abo

  • Is iPhoto deleted by the 10.10.3 update ?

    Ok, we now have the Photo app, to replace iPhoto. But does the update actually delete iPhoto from the Mac ? I have used iPhoto Library Manager from Fact Cat Software to split my pics archives into several iPhoto Library ( one per year basically ). I