E75 Stuck in a loop HELP!

All the sudden my E75 got stuck in some sort of loop this morning. The main screen keeps flashing over and over like its refreshing in a loop and won't stop. I restarted the phone, pulled the battery, and it keeps doing it.
I do not want to do ANOTHER FREAKING RESET ON THIS PHONE! I have had it a week and needed to wipe it TWICE now *Once after the number ported cause it wouldnt take data anymore even after a power cycle and once cause of graphical glitches all over the title bar*.
I just want my phone to be useable. Someone please help.

Only solution for now is by typing *#7370# (clear all data in phone memory, restore defaults).
Second thing, after restet- change "active" profile to "basic", and wait for phone soft update (not 100% sure, that is solution, but no loop for now after I changed profile).

Similar Messages

Patchadd stuck in infinite loop -HELP!!

Hi all,
Iam trying to install some OS patches in SunOS 5.8 machine[sun4u sparc SUNW,Sun-Fire-280R]
But after the process starts, it seems to get stuck in an endless loop. I get the following messages.
Checking installed patches...
Verifying sufficient filesystem capacity (dry run method)...
After the second line, the process of installing patch does not seem to end.
I did the install in single mode.
Rebootted the machine and did an fsck. But didnt help. Tried downloading a patch to patch 'patchadd' , but could not install it as well.
I tried debugging the patchadd. Here is a debugging trace.
required utlsa are available
Checking installed patches...
Verifying sufficient filesystem capacity (dry run method)...
+ exit_code=0
+ pkgInst=
+ pkgDispList=
+ dryrunFailure=
+ ReqArrCount=0
+ firstTimeThru=yes
+ cd /var/spool/patch/112396-02
+ + pwd
curdir=/var/spool/patch/112396-02
+ typeset -i pkgInsCtr=0
+ newpkglist= SUNWcsr
+ pkgInst= SUNWcsr
+ newpkglist= SUNWcsr SUNWcsu
+ pkgInst= SUNWcsr SUNWcsu
+ pkglist= SUNWcsr SUNWcsu
+ [[ -f SUNWcsr/pkginfo ]]
+ echo inside. . . .
inside. . . .
+ /usr/bin/cp /tmp/patchadd-127541250/response.1250 /tmp/patchadd-127541250/response.1250.1
+ [[ yes == no ]]
+ [[ yes == yes ]]
+ echo first time thru
first time thru
+ [[ no == yes ]]
+ pkgadd -D /tmp/patchadd-127541250/112396-02.1250 -S -n -a /tmp/patchadd-127541250/admin.tmp.1250 -r /tmp/patchadd-127541250/
response.1250.1 -R / -d . SUNWcsr SUNWcsu
+ 1>> /tmp/patchadd-127541250/pkgaddlog.1250 0< /dev/null 2>& 1
It seems like it is getting stuck in the pkgadd command .
Any help on this would be highly appreciated.
Thanks,
Vimalnath. A

HI,
Make sure the patch doesn't exists in the system.
Ski

Iphone stuck in infinite loop, HELP!

my iphone after resetting all settings through settings>general>reset, is stuck in an infinite loop.
it turns on, shows the apple logo, then about a minute later the loading symbol appears, after 10mins it quickly flashs black and then starts the loop again, i have left it for over 12 hours, to see if it will fix itself, but it wont.
i cant get it into dfu or recovery mode, it wont even turn off until it runs out of battery and then repeats its loop. when i charge it it just starts the loop again!
please i really need help, if i cant resolve this problem, im not going to buy the ipad and the iphone 4g as i planned to do so.
please could anyone help!

If you can't get your iPhone into DFU or recovery mode, there is a major problem. You can make an appointment at an Apple store if there is one nearby.
This is a user to user help forum only, so doubtful if any fellow users will lose any sleep over your threat not to purchase an iPad or the next generation iPhone when released if this problem cannot be resolved. If not, more than likely there is a hardware problem or failure. If a problem arises with your PC that you cannot resolve, are you not going to purchase another PC either?

How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
Jack

First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck.

Im stuck in a loop can any1 help

im stuck in a loop can any1 help me

Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
http://www.westwind.com/reference/os-x/commandline/single-user.html
Any change?

I am having trouble logging into itunes and redeeming cards on itunes. I enter the redeem code or go to log in and when i enter my password i get stuck in a loop. It keeps asking me for my password. Help...

I get caught in a loop when trying to log into my account in iTunes and redeeming cards. When i enter my password i get stuck in a loop where i kept getting asked for it over and over again. The weird thing is intermittently - maybe after 20 or 30 times it lets me redeem/in. But then it has the same problem again... I tried chat and it kept dropping out. Any help would be very welcome.

Ok, time to report the issue here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

TS3694 Apple 4s stuck in a loop and not restoring or updating Help please!!!!

Apple 4s stuck in loggo loop and not restoring or updating. I have tryed all the recomended stuff all the youtube video EVRYTHING!!!!! I cant think of any reasone for it to not work .one minuet it was playing music on my sterio and the next this loggo loop.   HELP PLEASE!! **** YOU APPLE!!!!

Maybe:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Or
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT4972 Today I updated - thru itunes- my iphone4, and restored backup, but am stuck in recovery loop and phone screen says "connect to itunes" or "connected to itunes". I tried turning the phone off and on. Still stuck. Help, please?

Today I updated, thru itunes, my iphone4, and restored backup, but am stuck in setup loop. After few screens of setup phone says "connect to itunes" or "connected to itunes". I turned off the phone and turned back on - still stuck. Help, please?

Unable to Update or Restore...?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

Firefox update is constantly failing and is stuck in a loop. I don't know how to bypass this. Help

When I start firefox, it automatically tries to install an update. This fails and it repeats, getting stuck in a loop which I can not get out of. Consequently, I am unable to open firefox and use the internet on this program. I have clicked ok, closed the dialogue box and ended the program using the task manager. None of these have worked. I prefer using firefox to other browsers but have had to return to internet explorer for the time being.
Do I need to uninstall and reinstall firefox or is there another option?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
Do a clean reinstall:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

Help! Ipod touch 5g stuck in recovery loop and cant restore

Hi. I have an ipod touch only a few weeks old. All was fine, but last week I started to experience dramatic reductions in battery life (flat in 12hrs, even if properly powered off).
I now have the "connect to itunes" logo on the screen and the ipod is not working.
Connecting to itunes, it requires a restore, but I am stuck in a loop of downloading, not recognising and then starting again.
I can see the file (all 900mb of it):
C:\Users\J\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates\iPod5,1_6.0.1_10A523_Restore.ipsw
But it just keeps re-downloading everytime I click restore - even though the file is already there. During the download, I think the ipod/itunes connection disconnects and then reconnects as you get a new "ipod in recovery mode warning".
Considering this file is nearly a gb I am reluctant to try any more. Is there a way I can force it? The ipod is otherwise not working at all now.
I have turned off my firewall per the advice elsewhere on here.
Cheers
James

Wow. I solved this.
To force the restore after downloading, but without the downloading again:
- Disconnect and then reconnect the ipod (important in my case)
- Hold the shift key and then click "Restore" SUPER SECRET or what!
- Navigate to the file as per the above.
Hope the restore happens before the next disconnect (did in my case)!
Sorted.
Now I hope my battery lasts better than before - was going flat overnight, even if turned off properly.....

Adobe Cloud membership - I am stuck in the loop of Licensing VERY Frustrating!!!

I have an Adobe Cloud membership - I am stuck in the loop of Licensing as well VERY Frustrating - I have a project due and have been troubleshooting for days -
Un Installing - Re installing - NIGHTMARE - Please someone help me!!! Thanks in advance -

What happens when you enter your Adobe ID tied to your subscription?

IMac froze, rebooted but finder stuck in crash loop...

I have an iMac 2007 running Mavericks. Recently it has started occasionally freezing where my mouse still moves around the screen but everything on the desktop is completely frozen. After holding the on/off switch to reboot it usually comes back on and opens the folders/programs that were already in use and all is well.
However, today was different....it froze while I was using Safari....so I held the on/off switch as usual to reboot and the usual pop-ups appeared, asking me to re-open programs etc. However, since then I can't get finder to open...I have a constant flashing message saying "Last time you opened finder, it unexpectedly quit while re-opening windows. do you want to try to re-open windows again. - It gives 2 options 'don't reopen and re-open'....but the box is continually flashing very second as though it is stuck in a loop....doesn't matter what I try to press, it does the same thing over and over. It means I can access anything on my dock but cannot see my desktop files or any other files on the hard drive. I haven't done a time machine backup for a long time so wary of my next move. Ironically, I just bought a new drive for time machine and this happened before I got the chance to do the backup!!! Typical.
Other useful info may be that I think I only have around 3gb of free memory space on my hard drive right now.
I am on version 10.9.4 of Mavericks and there is a software update available.....should I try to do the software update to see if it irons this problem out or is there anyway I can backup my hard drive first or any other way of accessing my hard drive/desktop files before I do anything?
I have seen this problem related to Google Drive before but I don't use that...unless it is installed somewhere on my system without me knowing and still causing the problem?
Any help greatly appreciated....
Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste topost the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

ICloud accidentally set-up with erroneous email acct. How do I reset the email originally used to start the Apple ID? I'm stuck in a loop...

Hi Apple friends! Here's my frustrating situation. When I got the new computer (2012 Macbook Pro), I tried to set up iCloud but accidentally input an erroneous email acct. I cannot access iClod because the email was accidentally input as "[email protected]", not "[email protected]". How do I reset the email originally used to start the Apple ID? I'm stuck in a loop, and not only cannot use iCloud, but I keep getting messages popping up to register my iCloud with a non-existent email...
Help?
Sincerely,
Cole
[email protected]

Have you tried to go into System Preferences > iCloud and entering the correct information there? You will first have to "sign out" of the wrong account and then log in with the correct information.
If that does not work you should direct follow up to the iCloud for Mac forum.

Apple TV 1st gen stuck in infinite loop

Hi
This has probably been covered a few times but the only answers I could find was from an archived discussion.
The other day I was given an Apple TV 1st gen, it had not been used for quite some time, and decided to upgrade the software, when I noticed it still had old pictures and music on from the previous user, not wanting to keep these pictures, I decided to reset the machine to factory settings, which it did, but on the restart it was stuck at a loop giving me a code to enter into iTunes, and then resetting and giving me a different code.
i've tried several resets of the settings, holding menu and - together, but still having no joy.
Its never been tampered with, but its really annoying me.
Can anyone help? this is a very old product so figure something might have been done during this time
Cheers
Dave

sounddave,
I have been in the middle of the same problem for months.
I think the problem is with the software version that the older 40GB Apple TV's revert to after the factory restore. Mine reverted to version 1.0, and that is when the loop started happening. Since when did a factory restore become a factory paper weight creator!
I read somewhere that the Apple TV looks at an Apple server and the older software doesn't play well with the updated server causing it to keep rebooting. I'll try to find a link about this if I can find it again. I remember reading that it happened to a bunch of people with older Apple TV software on a particular day that Apple upgraded their server.
If you don't let your Apple TV connect to the internet, it will stop the infinite loop, but it also means you can't upgrade your software. I haven't tried it yet, but it also might be an issue with newer versions of iTunes.
I tested this by unplugging my router, and the Apple TV stopped looping.
I tried to fix this before without success, but I am really determined this time.

Stuck in a "loop" at the login window after upgrading to Leopard

I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
Hello from Apple!
Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n306965
Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
Issue or symptom
After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
Products affected
20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
Mac OS X 10.5 Leopard
Solution
If Leopard is installed
Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
If Leopard is not yet installed
If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
Thank you,
Apple

If Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
Slim

E75 Stuck in a loop HELP!

Similar Messages

Maybe you are looking for