E90 Internal Screen Problem

Hi,
on 8 of Feb i got the E90 and today for no apparent reason the internal screen is not displaying nothin simply totaly black
any one had faced such issue ? any fast remedy or a service center is the only solution
appreciate your feed back
regards
Sharbel

The problem is probably hardware related so I am afraid a visit to the Nokia Care Point is probably the best.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Similar Messages

  • E90 Internal Screen Always On

    Hi, I have a e90 and I was changing the housing on it. I got it all together but now something weird is happening. The Internal LCD screen is always on, even when the phone is closed its still on and the external screen will not activate. I know the screen works because when it powers up the outside lcd turns on and says nokia but then immediately the inside one is activated. Any help? Thanks in advance.

    did you forgot to put back the neodymium magnet at it's place?
    if you don't know where, it's just by the end call key left side, when you open the internal display.
    I haven't completely opened my own but I did opened the external only and change the faceplate and keypad. I have two e90 any way . the other one is for experiment.

  • Screen problem

    i have screen problem...how i can repair it?

    Hi kader77,
    I apologize, I'm a bit unclear on the exact nature of your issue. If you are having issues with the display on your MacBook, you may find the troubleshooting steps outlined in the following article helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    - Brenden

  • Internal screen vertical interlaced

    Just out of nowhere my internal screen now and than turns out vertical interlaced. Either with black or white lines, alternating between normal screen at one vertical pixel row and a black/white line on the other. Like the interlace filter from the old days.
    It's seems quite random, no heating issues or special software and the MBP is mostly sitting on my desk.
    The mac keeps on functioning and the external display doesn't show the problem.
    PR-ram/SMC reset didn't resolve the problem, it just stops and shows up again after a while.
    Any idea's what could be wrong? I saw another post covering the same problem, but it wasn't solved.
    Thanks!
    Sebastian.

    Hi all,
    since approximately 4 weeks I have exactly the same problem like you guys describe. I already described it here
    http://discussions.apple.com/thread.jspa?threadID=2765765&tstart=45
    but unfortunately nobody answered. Without having "apple care" or any other guaranty, after seeing a couple of pictures from the NVIDIA BUG PROBLEM and talking to some people, I decided to replace the display. Unfortunately the problem continues.
    I think it is not very likely that the NVIDIA BUG Problem is causing such an consistent imaging error like we see it on our screens. All screen shots I have seen were with more chaotic imaging errors like colored blocks or a completely scrambled pictures.
    Anyway...
    Even the Aplle support seems not to be able to figure out what the exact problem is.
    What is with your screen shots ??? Are they OK?
    My screen shots are fine and not showing this vertical interlaced pattern.
    I think they are two components, other than the screen or the grafic board, who could also be the issue.
    The DISPLAY DATA CABLE and the LED DRIVER BOARD..... what do you think about ?
    I appreciate any suggestion,
    thanks
    Chris

  • Quicktime Player 10.3 when in fullscreen is not blanking internal screen on macbook pro on 10.9 OSX

    Hi,
    since going to Mavericks when I plug my macbook pro into the HDMI TV and apply fullscreen it no longer blanks the internal screen as it did previously.
    Any settings im missing here?
    It does in VLC player but only with the "use native fullscreen mode ticked"
    I cant find any settings in Quicktime 10.3 in relation to this????
    Mark.

    Hi,
    I afraid that your printer is too old and no longer fully supported.
    As you may find listed below already since Mac OS X 10.5 scan is no longer supported for your product:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en&os=219&product=3745...
    I afraid your only options are using a 3rd party solution as Vuescan or replacing your device.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • White/Gray screen problem on my MacBook

    My early 2008 MacBook (white) had the White/Gray screen problem and i don't know how to fix it since it's my first mac. I'm currently running Mac OS X Lion (10.7.5) and this happened when it was low battery a few days before it had the problem and i kept it low on battery of about  2 days and when i plugged it back in and attached a Seagate external hard disk then i powered it on it's just white/gray and I've 5 mins. and still white/gray. Cmd+R don't work and it won't boot from a disk unless the internal hard drive is out. Please help me my warranty is not going to help and there are no Genius bar here, Thanks

    Can' see the picture you post, so not sure how your screen is, though resetting SMC as well as NVRAM(PRAM) could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    OS X Mavericks: Reset your computer’s PRAM

  • What is the technical 'cause' of the infamous iMac black screen problem?

    Can anybody shed some light on what technical malfunction exactly causes the infamous iMac black screen problem? The common solution seems to be a logic board replacement. But what exactly is broken on the logic board? Is it the Geforce chip? Some kind of external driver circuitry? Or something completely different?

    I was referring to the many problems also described in this thread (and also in many other places):
    http://discussions.apple.com/thread.jspa?threadID=196774&tstart=0
    In specific I am referring to machines where all of this applies:
    - internal monitor stays black after power-on
    - computer boots normally
    - external display works normally
    - internal display backlight works and can be adjusted in brightness, but all pixels are black
    - PRAM reset doesn't help
    - NVRAM reset doesn't help
    - PMU reset doesn't help
    - reinstalling OS / booting from CD doesn't help
    - machines with this problem sent to repair come back with a replaced logic board
    I'm looking for more information on the technical cause of the exact problem as stated above. So I can attempt to repair my iMac

  • T61 External Screen Problem

    I can not get my external Samsung Screen to work alone without my notebook LCD on. I have tried eveything. Does not work in Nvidea control panel nor in Presentation Director. Running Vista x64 with analog cable to screen.
    Does anyone know this problem?

    go into bios and select vga and not internal screen, have a try. This is a software problem. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Internal screen shuts down after suspending on multi-screen configuration

    Hello,
    I upgraded (very) recently to OS X Mavericks on my MacBook Pro, which is plugged on a second screen via VGA. I wanted to suspend the activity on my computer, so I chose "Suspend activity" and then I closed the display panel to get the computer to "sleep".
    When I open the display, the internal screen remains off and is no longer detected by the system. When I go to "System Preferences" and select "Monitors", I get only the second screen preferences.
    In addition to that, the background is the one set on the first screen, but adapted to the correct resolution (I use a 1920x1080 screen, the internal one is 1440x900). When I do a screenshot, only the second screen is included.
    The only way to recover from this problem is to disconnect the VGA adapter and to reconnect it then.
    Am I reporting this problem in the correct place, and if not, where do I need to report it?
    Thank you.

    Spinning wheels are not a facet of Classic operating systems.    Identify your Mac with this tip:
    http://discussions.apple.com/docs/DOC-6413 and post to the appropriate forum: http://discussions.apple.com/docs/DOC-2463 after checking this tip on what may be slowing you down: http://discussions.apple.com/docs/DOC-6921

  • Run without internal screen?

    I've had problems with my iMac and it's the graphic card that's in really bad shape. It freezes after about 1-3 minutes with a black screen.
    So, I had some plans on using it as a headless server and have a custom front with a fan infront of the GPU. But it seems that the iMac needs the internal screen to be hooked up in order to start, can I do some workaround? Like tricking it to think the screen is hooked up or redirect the internal to the external?

    I have an idea I think might work. If the lid on a PowerBook is in the closed position, there should be no restriction with installing a new OS using an external monitor since only the external monitor will be active. I realize you don't have a screen attached anymore, but the magnetic switch that senses when the lid is closed is in the base of the PowerBook near the trackpad. That should still be in place on your PB. So you can trick it into thinking the lid is still there. See the photo here:
    http://www.mrob.com/images/TiBook-400.jpg
    That is for a 400 MHz TiBook, but hopefully yours is the same. Anyway, go get a magnet off your fridge and put it where that picture shows. It should put your Mac to sleep because it will think the lid was just closed. So try putting the magnet there and see if in fact it does trigger a sleep response.
    If it works, then do a restart but leave the magnet there. You should be able to start from the boot CDs and install the new OS using your Viewsonic as the monitor. You have to have the PB plugged into it's AC adapter for this to work by the way.

  • Screen problems with 540c after fresh install of 7.5.3

    I'm trying to get my Powerbook 540c ready to eBay before I go overseas to teach English. I did a Clean Install of 7.5.3 that I downloaded off Apple's website, and foolishly deleted my old System Folder along with the rest of my files before restarting the system. This morning I start the system up for the first time since the install and the LCD screen is acting wonky. There are transparent blue lines at random places on the screen (the "View" menu in the Finder is in blue, for example, and a blue line appears across the screen when I select a menu).
    Is it possible this is because my system is now lacking one or more extensions it needs to operate properly? Or did my screen just pick this moment to develop a physical malfunction?
    Thanks!

    All the necessary extensions for a PowerBook 540c would have been installed by the downloaded System 7.5.3 software (with the possible exception of a computer with a third-party PowerPC upgrade).
    What you describe sounds like a hardware problem (for instance, an internal screen cable or connector). Before attempting to open the PowerBook, you may want to try to reset the Power Manager and the PRAM (although it probably will not help).
    Jan

  • How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

    Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update  to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
    The Background/history
    I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8.  I created a single partitioned drive to install windows 7 professional 64 bit.  The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in.... 
    The installation of Windows 7 Pro 64-bit
    So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black....  in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
    The problem, re-emphasized :  I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files?  not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run...  Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver  without having been able to complete the windows 7 installation because the monitor goes and stays black????
    This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
    Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
    ---I've been told to install the osx dvd and run "setup.exe"  - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
    ---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/  for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
    ---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

    hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something?  if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean?  it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
    Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this?  just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600?  (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
    So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
         1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
         2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

  • Trying to update OS to fix White Screen problem.

    Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

    Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

  • Screen problem making iPad unusable

    My iPad2 is 15 month old and has developed a strange screen problem. It seems to have developed a mind of its own, typing ahead with random characters, doing its own thing when scrolling and trying to select in apps. Two days ago Apple support said restore to factory settings which I did. Same problem came back. Yesterday Apple support said the same thing which again I did. Same problem came back Today Apple support say it's a hardware issue out of warranty. We had a polite discussion about EU legislation but to cut a long story short, they basically said "sorry about that, but there is nothing our policies will let us do, you're on your own"
    Not exactly the response I hoped for. So I've now got an iPad that is basically useless, unless I want to use it as a door stopper.
    My business made a strategic commitmnt to Apple in Mid 2011 and this iPad was part of our shift away from PC/Windows. It's the first time I have needed to deal with Apple Support, and while each of the people I have spoken to have been professional, understanding and helpful, they have been unable / not allowed to assist any further.
    Yes, we could have taken out Apple Care Agreements. We chose not to on the basis of 2 year statutory warranty and Apple's reputatiuon for reliability. Seems I made a big mistake here and am left wondering if we made the right decision in going down the Apple route. Our investment in Apple hardware and software is massive for an SME and our workflow depends on iPads.
    I'm left with a problem. Thanks Apple.
    I'm still a fan but my blinkers have been removed. No longer will you be giveen the benefit of the doubt when you screw up - Maps, WiFi etc - as you have had a direct and negative impact on my business and missed a chance to keep a very happy customer on board.
    Does it help to post this? Not really, but it's off my chest.

    And you are within your "rights" to post this. But you do realize that we are not Apple employees - correct? We are just other users like yourself. If you feel that you have been treated unjustly, move up the Apple chain of command. Politely demand to speak to the next higher up and go from there.

  • Screen problems with photoshop elements 10

    I installed Photoshop Elements 10 and Premiere Elements.
    Premiere Elements works allright, but Photoshop E 10 gives screen problems.
    De menu's on the top roll out, but there is no text in them.
    The screen in Organiser is distorted.
    I reinstalled P E 10 but the same problem accurs.
    I dit a computer reset to an earlier date and installed Ph.E. 10 again but the same problem. No text in the topmenus and a distorted screen in Organiser.
    Letters become 6x larger than normal.
    All my other programms work fine. I never had screenproblems.
    I use Elements 8 now again and that works fine.
    I use: Windows 7
    Card: NVIDEA GeForce GT 220 resolution 1680x1050
    Do I have to remove Elements 8 before installing Ellements 10? Is that perhaps the problem?

    Ken, The problem is: The buttons don't work. So I cannot use Edit...
    But:
    I reïnstalled Adobe Elements 10 for the 4th time
    Cleaned my register again.
    restarted my computer
    Did a computer reset to an earlier date
    Installed Elements 10 again but .......not the try version of Premiere Elements.
    Now Elements 10 has a normal screen.
    This was a try and error sollution. I hope it will last.
    Jan

Maybe you are looking for