E90 List of Messages in Inbox

Hello,
In my Inbox the list of text messages is shown as (Last Name First Name) sender order.  How can I change it to First Name Last name sender order? (the contact list displays First Name Last Name, but the text message senders are in different order).
Thank you.
Message Edited by seweryn on 30-Apr-2009 09:46 AM

Hi,
I hope you have to wait for the fix.
This has been reported and been taken care.
Also you can loop yourself here /discussions/board/message?board.id=communicators&message.id=12914&query.id=3293647#M12914
If this post helped... Add some kudos!!

Similar Messages

  • How do I increase the point size and change the font for the windows and boxes on Maverick such as the tiny print on the email inbox list of messages.  Can increase size on the actual message but not on the list of messages.

    How do I increase the point size in the dialog boxes and especially on the list of messages on email?  I can increase the point size and font of actual messages content but not the LIST of emails in my inbox.  They are too small for me to read.

    This discussion is for computer built before 2006.
    You could use a different mail app.  Consider thunderbird.
    It can be hard to find with community ( forum ) to post to. Here is an easy and complete list:
    https://discussions.apple.com/community
    I'll ask the host to move this post to M.
    Robert

  • In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    WoW! I'm surprised by the speed you reply and how serious you are with your answers! Thank you very much guys!!!
    Replying to Toad-Hall:
    I have a proper mailing list created as the manual says. It's a small group of contacts that exist in the address book. I do not type them as CC I just write "clients" and before I finish the word the name of the list appears.
    How can I stop Avast from scanning out going mail? It's the free version and I haven't found a real solution. I also tried to totally turn off the "mail shield" but I kept facing the same issues. However, I just turned it off and tried to send the mail, I didn't restart windows or thunderbird
    The idea with ipage server was fantastic! It would never come to my mind!!! As far as I see, the limit is 250 mails per hour. I doubt if I have ever reached the 50% of it. I also don't reach the bandwith limits... Besides that, if I had exceeded the limit I would get multi responses that "mail was not delivered".
    I want to thank you both for your excellent help so far. I'm sad to say that I still haven't solved the issue. When I made smaller lists, with the same addresses chosen from the address book I could send the messages, having a short delay. I would blame Avast but I tried the same on another laptop with my favourite NOD32 and had the same problem.
    What else should I check? Should I focus on Avast?

  • Mail messages in my In Box are not appearing in the list of messages.

    Mail: SOME mail messages in my In Box are not appearing in the list of messages.  Instead, there's a blank line in its place if already read, or just the blue dot if unread.  But when I click on the line, the message's column/header detail appears (and I can open it).
    (Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash.  None of the emails I'm questioning have any reference to his email address in them.)

    Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message.  (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

  • Problem with Thunderbird email: When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others rece

    Problem with Thunderbird email:
    When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
    Bob Greenman

    Are you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.

  • How can I reset the view to include the panel at the bottom of the list of messages?

    When the inbox displays the list of messages, I used to have a panel at the bottom of the pane which had a "delete" button, so I could scroll through the display quickly and delete the ones I did not need to read in full, or did not wish to read in full. That panel has disappeared and I would like to get it back.
    Thanks in advance for your help

    F8 turns on/off the preview panel at the bottom. When it is on, there is a 'Delete' button for the message.

  • How do I "Apply Rules" to a list of messages via Applescript?

    I am attempting to write an Applescript. It needs to enable a particular rule (got that figured out), then re-apply all rules (all of them) for all of the messages in the Inbox and the Sent box. I figured out how to get the list of messages in to a variable but I do not see anything in the Mail dictionary to apply the rules -- (or evaluate the rules or nothing).
    I suppose I could use the GUI style "System Event" form of scripting but that is always really hard for me to figure out how to do.

    Amann says about this script:
    Note: this script is somewhat ugly and slower than Mail's internal apply rules command - things would be so much easier if Mail would allow rules to be applied to sent messages or at least supply an AppleScript command "apply rules to selection".
    If you examine it, it does pretty much what I suggested regarding grabbing the conditions for each rule & testing for them within the script (in the "matchConditions" loop). As his notes make clear, certain conditions are excluded & the script only performs "move" actions, so you would have to do something similar for any other rule conditions & actions you want the script to perform, as well as targeting the mailbox you want.
    I suspect it would be faster & easier in a lot of cases just to implement the rules as AppleScripts in the first place & call them with a simple "Every Message" Mail rule.

  • Unable to select IS from the drop down list in message mapping

    Hi,
    i  know that we can monitor 'Integration server' in message monitoring rather than choosing integration engine or adapter engine.
    But in our existing land scapes i am unable to select IS from the drop down list in message mapping.
    using PI 7.1 SP 08.
    please let me know that we need to set up additional configurations settings to select IS form drop down list.
    Regards,
    Pradeep A.

    Hi Pradeep,
    please let me know that we need to set up additional configurations settings to select IS form drop down list.
    There are no extra settings that needs to be done for this. I don't know whether you have noticed this, but IS option will only come up when you want to monitor the messages from the "Database" and not from the "Database overview" or "Archive".
    Regards,
    Neetesh

  • How to create a folder (in unified folders) which contains all the messages of inboxes and outboxes

    Hi, i've searched without success how to create a folder (in unified folders) which contains all the messages of inboxes and outboxes (as it exists in Windows Live Mail).
    For me, it would be very useful to search in only one folder when i try to find something in sent and received mails.
    Thank's

    This is what Unified Folders does. I'm not sure what exactly you're trying to achieve.
    http://kb.mozillazine.org/Global_Inbox#Unified_Folders
    You might take a look at this article.
    https://support.mozilla.org/en-US/kb/global-search

  • Mail 4.1, Exchange, and Duplicate messages in inbox

    Using Snow Leopard and Mail 4.1 to access an exchange account and a gmail account. The problem ONLY occurs in the Exchange account. My messages are all duplicating. Only in Mail are they duplicating. I've checked Outlook Web Access and Outlook on my windows machine - no duplicates there. Didn't start out this way, and the problem came once before, stopped, and now it has returned. If I delete one copy of the message, both messages get deleted. Is there someway to rebuild the mail inbox? or resync?
    Also, tried creating a new folder on the exchange server, copying all messages from inbox to the new folder, then moving back. In the temp/new folder, the messages were single. After copying back to Inbox - they doubled again. And again, only in Mail. The msgs remain single in Outlook, OWA, iPhone, Blackberry.
    UPDATE: I highlighted the exchange mailbox and went to MAILBOX > REBUILD. Erased everything but only in Mail. The messages are still on the Exchange server and can be seen by OWA, Outlook, iphone and blackberry. New messages are going to the Mail Exchange inbox but old messages are gone. Any way to get them back?
    Message was edited by: Atlantax

    FromBone wrote:
    Thanks V.K.! So there is no chance for me to re upload all the messages from my mac to my yahoo inbox.
    nope.
    May I ask yahoo to that?
    you can ask but they won't say anything different.
    I could never have known that the default setting on mac's mail would be "remove copy from server after retrieving a message".
    now, that's a valid point. this is not exactly advertised and mail setup assistant does not tell you anything about it. you can voice your concern to apple about this issue here
    http://www.apple.com/feedback/macosx.html
    I wish apple had some kind of a solution for this.
    there isn't anything you can do now. it's not up to apple at this point. you just can't upload messages to a POP email server. it does not matter what email client or what operating system you are using.
    Thanks again

  • List of messages in the PCUI screen

    Hi Friends,
    Iam working in CRM 4.0.
    We have a list of messages displayed on the top of the PCUI screen. We can see a message on the top and a 'Show List' link at the top right side. When we click on that 'show list' it displays the remaining messages if any. When we click on the 'Hide List' link it will hide all the messages and only one message is displayed at the top.
    My requirement is, I want the list of messages to be displayed by default. I mean without clicking on the 'Show List' link, when my page loads, all the messages should be displayed and 'Hide List' link should be displayed. On clicking the 'Hide List' it should hide the list of messages except one.
    How to solve this...
    Regards,
    Raju

    Hi Raju,
    For this you will have to change the code a little bit and it will be a customer modification . The Show List and Hide List are links, you will have to disable then and maintain the code which will display all the errors. This will invovle change in the view and the controller.
    Please let me know incase you want further details..
    Regards,
    Hemanth

  • No Auto-Update for To Do list, session message and toast message

    After LC ES Server hardening, we noticed that auto-update is not working for To Do list, session message and new task notification toast message. Before server hardening, all of them are still working fine.
    Does anyone know why auto-update is not working after server hardening? Is there any specific port numbers which need to be enabled/opened to solve this issue?
    FYI, we also noticed that some RemoteEventClient error messages occur many times in jboss server.log file as the following:
    --- LOG QUOTE START ---
    2008-01-10 15:26:16,086 INFO [STDOUT]
    GMS: address is neptune:[MULTIPLE VARIOUS PORT NO]
    2008-01-10 15:26:19,398 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] Client JGroup initialization failed to connect to service JGroup. Service JGroup initialization may not be complete, retrying...
    2008-01-10 15:26:20,414 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver using JGroups config UDP(bind_addr=10.77.250.248;mcast_addr=238.42.102.134;mcast_port=42707;ip_ttl=8):PING(tim eout=3000;num_initial_members=6):FD(timeout=3000):VERIFY_SUSPECT(timeout=1500):pbcast.NAKA CK(gc_lag=10;retransmit_timeout=600,1200,2400,4800):UNICAST(timeout=600,1200,2400,4800):pb cast.STABLE(desired_avg_gossip=10000):FRAG:pbcast.GMS(join_timeout=5000;join_retry_timeout =2000;shun=true;print_local_addr=true):VIEW_ENFORCER
    2008-01-10 15:28:21,216 INFO [STDOUT]
    GMS: address is neptune:3874
    2008-01-10 15:28:24,528 ERROR [com.adobe.livecycle.remoteevents.client.RemoteEventClient] Client JGroup initialization failed to connect to service JGroup. Maximum retries exceeded.
    2008-01-10 15:28:24,528 INFO [STDOUT] Jan 10, 2008 3:28:24 PM com.adobe.workspace.events.RemoteEventClientLifeCycle$RemoteEventInitThread run
    SEVERE: null
    com.adobe.livecycle.remoteevents.client.RemoteEventConnectionFailedException
    at com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver.<init>(Remo teEventClient.java:213)
    at com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver.getReceiver (RemoteEventClient.java:159)
    at com.adobe.livecycle.remoteevents.client.RemoteEventClient.<init>(RemoteEventClient.java:3 61)
    at com.adobe.workspace.events.RemoteEventClientLifeCycle$RemoteEventInitThread.run(RemoteEve ntClientLifeCycle.java:65)
    at java.lang.Thread.run(Thread.java:595)
    --- LOG QUOTE END ---

    JGroups is an open source project that allows processes to send messages to one another. LiveCycle data services uses it for its messaging implementation (basically it configures the server to multicast messages to all the listening clients...even in a clustered environment across different LAN/WAN).
    In most cases the default configuration will work fine, the problem is that if you are running a firewall on the server (or your local machine...i.e. windows firewall) the ports that JGroups uses for its communications can be blocked. In a local environment its easy enough to disable windows firewall and bounce your server to get things working.
    In a production environment you need to open the ports that JGroups is using. These settings are in the Global Administration settings (as mentioned by WorkspaceUser above). If you export it and look at the JChannelConnectionProperties you'll see the ports its using and you can set your firewall to allow communication to those ports.
    Bryan

  • Reading message from inbox

    I want to write a J2ME application which will read message from inbox.i used the following code to open fileconnection with inbox
    FileConnection filecon = (FileConnection)
    Connector.open("file:///c:/system/mail/directory");
    I am using Nokia 6610i.I am getting the following error:"The requested protocol does not exist file:///c:/system/mail/directory"
    Can anyone help me out?

    Hi
    If you want to be able to store data and then retrieve it, the you can use RMS, but if you want to get data already stored on your phone then you need the FileConnection API. There is no work around this as far as I know.
    Mihai

  • Outlook 2013: how force outlook to go always to the newest message in inbox folder?

    Hi,
    how is possible to force Outlook 2013 to go always to the first and newest message in inbox folder?
    Actually Outlook always point to the current message selected for each folder.
    Thanks!

    Upon starting Outlook, it will always go to the first item in the folder. During your Outlook session, when you return to a folder, it will select your last selected message. You can't change this. Pressing the Home button on your keyboard will instantly
    bring you back to the top.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • Remove all message in Inbox?

    Hi all!
    Please help me? I have one question. I want remove all message in Inbox when I recreate account .How to do?

    Hi,
    BanhChuoi wrote:
    Please help me? I have one question. I want remove all message in Inbox when I recreate account .How to do?Just the INBOX or do you want to remove all emails for the account?
    If the latter then you can do this by running the following on the messaging server:
    ./mboxutil -d user/<uid>/INBOX
    If the former, this isn't actually easy and would require deleting emails off disk and then running a reconstruct on the account.
    Regards,
    Shane.

Maybe you are looking for