EasyStartup 3.8.1c fails to load on TS140: Fatal server error: no screens found

I just got a TS140 (70A4-000HUX). After unboxing, I installed 4 x 2TB SATA HDs, attached my external USB DVD drive, configured the BIOS to boot first from the DVD drive, and inserted the EasyStartup DVD that came with the system.
The program boots fine, and then drops out to the red hat command prompt with the following message:
(EE) VESA(0): V_BIOS address 0xd00 out of range
(EE) Screen(s) found, but none have a usable configuration
Fatal server error:
no screens found
I have tried changing the setting for the onboard VGA adapter in BIOS, but (obviously, since I'm posting this) no joy.
Not that I necessarily need this program to set up the server. But I'd like to see what it can do.
I'm also not seeing the option to press Ctrl-I to get into the Intel Rapid Storage Technology BIOS utility even though I've set the SATA controller type to RAID in the BIOS.
And it's not clear to me just what the Intel Manageability password is by default even though I can get to the prompt to login.
Any and all assistance is greatly appreciated.
Solved!
Go to Solution.

And...
I figured it out.
Apparently, it's not a good idea to change the Boot setting to UEFI only. Can't use EasyStartup or the Intel BIOS for RAID in that mode.
I still need to figure out the Intel Management interface though. I reset it and apparently the old/default password is "admin" but it won't accept a new password.

Similar Messages

"Quicktime Streaming failed to load because of an unknown error"

iTunes and Quicktime will not load, install, or uninstall because of at some point the popup message "Quicktime Streaming failed to load because of an unknown error" appears. Succesive reboots and removal of SpyBot (which may have denied access to Quicktime because of a registry setting, which of course may still be the cause of the problem...) have not fixed the problem. Any ideas?

I have struggled with the same problem for the last few years and could not find any adequate answers. Being a person who likes to run his PC clean and mean, I had stopped all those Apple Itunes / Quicktime applets and deleted Itunes application as I preferred other Media players & converters. Recently my Nokia 6300 phone suite would send me the same error every song I moved from PC to phone. The clue was that I had chosen Optimised AAC format instead of stock standard MP3. Working on this hunch, I re-activated Apple's Software Update from the Scheduled Tasks items of Control Panel to update Quicktime, Itunes and Safari. Now I have AppleMobileDeviceService.exe, iPodService.exe, iTunesHelper.exe all running and I do not get the error anymore. There is also the Bonjour (DNSResponder.exe) service to be considered. See:-
http://www.tombraiderforums.com/showthread.php?t=122420
http://digg.com/apple/iTunes5Disasters

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Failed to load an application resource (internal error) - error message when previewing pdf in program

Hi,
I keep getting this error message when trying to Preview PDF in program "Failed to load an application resource (internal error)". I haven't changed anything in LiveCycle, so not sure why this is happening. Have had this issue for the past few months. I've been working around it, but it's kind of a pain. Would prefer to view forms in program. Suggestions to fix this?
Thank you!
Stacy

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Failed to load an application resource (Internal Error)

Hi,
Running Leopard MAC OS/X 10.5.6 and Adobe Reader 9.1.0. Is anybody going to fix this problem???? Which happens when you try to run Preferences. I won't even mention the fact that I cannot print either. Ooops, I just mentioned it...
Thanks.
Susan

The same problem occurs for me.
The error Failed to load an application resource (internal error) appears when viewing preferences inside the application.
Like wise, when printing a similar error message is shown.
I have uninstalled the application, all adobe products on the system, removed application support files, preferences, PDF preferences and reinstalled. The problem still exists.
I installed the same version (v9.1.0) on another mac that had never had Acrobat installed before and the problem does not exist. I am able to view preferences and print.
Both are intel based Macs running 10.5.6.
Given that it works on one mac and not the other, what would be causing this?
Also is there an uninstall tool for Adobe Acrobat Mac from Adobe?

Wireless Media Server: "Failed To Load Component of Media Serve

When I try to install Wireless Software it always ends up in telling me "Failed to load component of Media Server" after I've restarted the system. Media Server is not running and no icon of Media Server is to be found in the system tray. ?

I am having the same problem. Did you ever get a solution?
I've tried:
uninstalling/reinstalling all the software
forcing exceptions in my firewall (Norton), showing they permit all traffic from the Media Server & Console
assigning a static IP address (my router shows the receiver as connected to the network)
But I still get the "Failed to load component of media server" message every time I log in to Windows or try to start the Media Server manually. When I try to do the receiver's Network Setup (either letting my router assign and address, or with assigning the static address), at first I get the flashing green lights, then just a solid red, with the message that my settings are incorrect. Are those two separate problems, or the same problem?
I am using a 2Wire HomePortal Gateway. The main computer I am attempting to set up through is connected by Ethernet to the gateway. I am using WEP 64-bit encryption with a single key. There are notes about "open" vs "Shared key" modes, but I don't know where to find that info in the HomePortal's settings. I have connected a laptop and a PDA wirelessly with no problems once the key is entered. I can see the receiver on the gateway's summary page of my home network.
Any help is appreciated!

I've downloaded acrobat XI Pro, installed it, but get "Acrobat failed to connect to a DDE server error message.

I've downloaded acrobat XI Pro, installed it, but get "Acrobat failed to connect to a DDE server error message.

Hi Bruce,
Please open registry by typing "regedit" in the Run window (Windows + R)
Now, navigate to "HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and changing the Key from "AcroviewA10" to "AcroviewR10.
Now, try launching Acrobat and let me know if the issue resolves.
Regards,
Anubha

When I try to move messages to trash I get this The IMAP command "CHECK" failed for the mailbox "INBOX" with server error: Error in IMAP command received by server.. what do I do ?

I try to move emails into the trash and this message comes up;
The IMAP command “CHECK” failed for the mailbox “INBOX” with server error: Error in IMAP command received by server..
what should I do ?
My trash is empty and I re booted etc...

Back up all data. Rebuild the mailbox. Try again to delete the message.

When deleting emails i get the following error message at times ...The IMAP command "UID COPY" (to Deleted) failed for the mailbox "INBOX" with server error: Error 9. Server error. Please try again later..

When deleting emails i get the following error message at times ...The IMAP command “UID COPY” (to Deleted) failed for the mailbox “INBOX” with server error: Error 9. Server error. Please try again later..

Please complete or update your system profile so the users here can properly help you.
Which email client are you using?

"Failed to load Main-Class manifest attribute" error message !

Hello
I am trying to download a library to use with my applets.
(objectdraw.jar)
After I download it, I try to open it ( double click on it) and it says
"Failed to load Main-Class manifest attribute from
C:\2_jbproject\objectdraw.jar
I need to open it in order to use it with my applets .
What do I need to do ?
Thank you in advance

cannot find symbol constructor
Sun(objectdraw.DrawingCanvas)Isn't Sun your class? If so (unless BlueJs error messages are confusing) it sounds like your Sun class does not have a constructor with the signature you are using.
I'm not familiar with BlueJ, but hopefully it ignores the classpath environment variable (though your error message lead me to belive otherwise). Regardless, this is a bad way to use classpath as it can lead to confusing problems down the road.
The objectdraw library is there but maybe I have to open or extract itfor it to be seen. But how ?
No you don't have to extract it, thats the whole point behind a jar. What you do have to do is ensure it is on the classpath for both compilation and execution. For compilation, read the help/documentation for BlueJ. For applet deployment, refer to the java tutorial section on applets and pay close attention to the applet tag description, especially the comma delimited archive attribute.
Good luck

How to fix Login failed for user ''. (Microsoft SQL Server, Error: 18456)in windows 2008?

Hi All,
we are facing the Login fails issue .
how to resolve the bellow error , could you please suggested the possible ways .. ASAP
TITLE: Connect to Server
Cannot connect to ..
ADDITIONAL INFORMATION:
Login failed for user ' domain\name'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
BUTTONS:
OK
Log Name: Application
Source: MSSQLSERVER
Date: 10/6/2011 1:56:28 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: domain\name
Computer:
Description:
Login failed for user ' domain\name'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
RAM

I was hitting myself in the head with this problem for a couple of minutes.... Everything was fine on the DC and Domain itself.. I added the Domain admins Group Principal for which I am part of... I was getting this error ... Long History... Short
(Right Click and Run as Administrator took care of this for me..) UAC was the cause of the problem.
Cannot connect to XX-DB-XX3.
===================================
Login failed for user 'XXXXS\XXas'. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
Server Name: XX-DB-XX3
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

Failed to Connect to CCMCIP authentication server error

Hi All,
I am getting a strange error with a CM8 Cisco Unified client services framework client.
He is getting failed to connect to CCMIP authentication server.
The user is assoicated with a phone line.
He is in the CCM end users and standard CTI enabled group.
The phone is setup to be controlled via CTI.
I had one of the IT support guys use this users login to try and login using a different PC with the similar results.
This makes me wonder if the problem is with the users' profile on the Presence server somehow.
I will attach the problem report along with one of the error messages.
I have noted the problem with the voicemail server and will get the password fixed up soon.
Any help or ideas would be so appreciated.
Regards
Amanda

Hi All,
I am continuing to work on the problem.
I found something interesting in the core log file.
I will attach the new debug report.
If anyone has any ideas for how to fix this please let me know.
thanks
Amanda Lalli-Cafini
CredentialsType: PHONE_SERVICE, UserName:
Michael.O'[email protected]
, Remember: false
2012-03-01 13:43:22,595 DEBUG [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(90)] - Attempting to connect to primary CCMCIP host: 10.2.2.11
2012-03-01 13:43:22,595 WARN [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(241)] - Unknown certification level, setting it to SELF_SIGNED_CERTS. Unknown level value: null
2012-03-01 13:43:22,595 INFO [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(244)] - Setting certification level to '1' (SELF_SIGNED_CERTS)
2012-03-01 13:43:22,972 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.populate(323)] - JAXB unmarshal error! unexpected element (uri:"", local:"html"). Expected elements are <{}devices>
2012-03-01 13:43:22,973 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(112)] - No backup configured, giving up
2012-03-01 13:43:22,973 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1563)] - Couldn't connect to any CCMCIP host. Sending async error.
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [EventAdapterImpl.publish(140)] - publish method = onError class = com.cisco.uc.core.broker.phone.device.DeviceServiceCallback
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [BaseClientProxy.publish(109)] - Adding callback to queue : onError priority message true
2012-03-01 13:43:22,974 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1581)] - CCMCIP host is unreachable. Trying to use the last used softphone device.
2012-03-01 13:43:22,974 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.isSRSTConfigured(1672)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1599)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceAdapter] [DeviceServiceImpl.initialize(435)] - Problem initializing on the Device service. Could not connect to CCMCIP
com.cisco.uc.core.common.exceptions.device.CCMCIPFailureCoreException: Could not connect to CCMCIP
CredentialsType: PHONE_SERVICE, UserName: Michael.O'[email protected]
, Remember: false
2012-03-01 13:43:22,595 DEBUG [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(90)] - Attempting to connect to primary CCMCIP host: 10.2.2.11
2012-03-01 13:43:22,595 WARN [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(241)] - Unknown certification level, setting it to SELF_SIGNED_CERTS. Unknown level value: null
2012-03-01 13:43:22,595 INFO [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(244)] - Setting certification level to '1' (SELF_SIGNED_CERTS)
2012-03-01 13:43:22,972 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.populate(323)] - JAXB unmarshal error! unexpected element (uri:"", local:"html"). Expected elements are <{}devices>
2012-03-01 13:43:22,973 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(112)] - No backup configured, giving up
2012-03-01 13:43:22,973 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1563)] - Couldn't connect to any CCMCIP host. Sending async error.
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [EventAdapterImpl.publish(140)] - publish method = onError class = com.cisco.uc.core.broker.phone.device.DeviceServiceCallback
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [BaseClientProxy.publish(109)] - Adding callback to queue : onError priority message true
2012-03-01 13:43:22,974 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1581)] - CCMCIP host is unreachable. Trying to use the last used softphone device.
2012-03-01 13:43:22,974 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.isSRSTConfigured(1672)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1599)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceAdapter] [DeviceServiceImpl.initialize(435)] - Problem initializing on the Device service. Could not connect to CCMCIP
com.cisco.uc.core.common.exceptions.device.CCMCIPFailureCoreException: Could not connect to CCMCIP

Oracleasm lib failed to load with "Invalid module format" error

Hi,
I'm tring to install the oracleasm lib onto our hardened Redhat EL5 server
I've download the oracleasm rpm from this page http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html.
We're using Redhat 5 U 2
[root@PG673 modules]# uname -rm
2.6.18-92.el5 x86_64
[root@PG673 modules]#
The package I downloaded is an exact match with our kernel version
[root@PG673 modules]# rpm -qa | grep asm
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5
oracleasmlib-2.0.4-1.el5
[root@PG673 modules]#
RPM installation went well, but when we run the /etc/init.d/oracleasm configure command, we hit the following error
[root@PG673 other]# /etc/init.d/oracleasm configure
/etc/init.d/oracleasm: line 207: /usr/sbin/oracleasm: cannot execute binary file
Later we found out that the oracleasm module haven't been loaded, so we try to load it manually, but we hit the "Invalid module format" error.
[root@PG673 modules]# modprobe -l | grep asm
/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko
[root@PG673 modules]# modprobe oracleasm
FATAL: Error inserting oracleasm (/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko): Invalid module format
[root@PG673 modules]#
As I know this error could happen if the driver version is not match with the system kernel version.
The problem is we're already using an exact match version of driver with our system, I can't think of what to do next in order to proceed the installation.
Really appreciate if someone could point me a direction.
Thanks
Mike

Hi Mike,
something looks a bit strange for me. On my OEL 5.4 x64 system i have just the following 3 packages:
$ rpm -qa | grep asm
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasmlib-2.0.4-1.el5 Your packages should be I think the following:
http://oss.oracle.com/projects/oracleasm-support/dist/files/RPMS/rhel5/amd64/2.1.3/oracleasm-support-2.1.3-1.el5.x86_64.rpm
http://otn.oracle.com/software/tech/linux/asmlib/files/RPMS/rhel5/amd64/2.0.4/oracleasmlib-2.0.4-1.el5.x86_64.rpm
http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-92.el5/oracleasm-2.6.18-92.el5-2.0.5-1.el5.x86_64.rpm
Uninstall all asm packages and retry with just those three.
Good luck!
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Failed to load an application resource (internal error) win XP

I am
trying to correct the problem of not being able to open .pdf files from internet websites.
This is the error that I get when I go to edit
- preferences in adobe reader. Anyone have any advise? Greatly appreciated. Windows XP

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

EasyStartup 3.8.1c fails to load on TS140: Fatal server error: no screens found

Similar Messages

Maybe you are looking for