EBS 11i with 10g RAC - rapid clone

Hi,
I have installed Oracle EBS 11i (11.5.10) with Oracle 10g RAC (two node) on Linux server.
I am using ASM for 10g RAC.
Now I want to rapid clone the EBS to devp server having two node RAC.
Will you pls give me detail steps to perform this cloning?
Any help is highly appreciated.
Thanks,
DR

Take a look Doc ID: 230672.1 on Metalink Section 6 talks about Cloning a RAC system
If you're trying to search for anything on EBS look for Applications 11i, because most docs refer to it as Applications 11i more often then EBS.
Cloning Oracle Applications Release 11i
with Rapid Clone

Similar Messages

  • EBS 11i ASM Non-RAC

    Hi,
    I wonder is it possible run EBS 11i database on ASM with Non-rac enviroment.
    Thanks.
    Edited by: ecer on Jul 28, 2012 9:30 AM

    I wonder is it possible run EBS 11i database on ASM with Non-rac enviroment.It is possible.
    Please see these docs for details (skip the RAC steps).
    Configuring Oracle Applications Release 11i with 10g RAC and 10g ASM [ID 312731.1]
    Step by Step Guide to configure Oracle Applications Release 11i with 10g R2 RAC and ASM [ID 731278.1]
    Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1]
    Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1]
    Thanks,
    Hussein

  • Putting Oracle Apps 11i on 10g RAC using VMware

    Hello All,
    I am building a Oracle Applications 11i on 10g RAC, using VMware..Since there aren't any docs I could find on internet explaining how to do this, I have come up with my own. I have combined the MEtalink doc:362135.1 and the docs describing building a 10gRAC "database" using VMware..I want to know if the below process is good enough to get the required results:
    Steps:
    -Install VMware on HOST m/c
    -Configure 1st virtual m/c, say RAC1
    -Install RHEL on RAC1
    -Install 11i with 9i database on the local SCSI bus- SCSI 0:0
    -Install VMware client tools
    -Create a new ethernet adapter(for private interconnect) on RAC1
    -Create shared disks on RAC1
    -Partition the disks
    -Add the disks as RAW devices in /etc/rawdevices
    -Clone RAC1 to a new virtual m/c,say RAC2
    -Delete the 11i apps directories from its local SCSI bus..since these would be redundant on RAC2
    -Install Clusterware s/w on RAC1 using the same oraInventory that is used by the Applications 11i installation-
    -Install the 10g DB software and create ASM instances using dbca
    -Install Database componenets from 10g companion CD
    -Upgrade CRS abd DB s/w to 10.2.0.4
    -Upgrade the 9i database to 10g using dbua from the 10g ORACLE_HOME
    -Convert the newly upgraded 10g databse to RAC using the rconfig tool
    -Post migration steps for RAC
    -Enable AutoConfig on the Applications Database tier
    - Follow the "Establish Applications Environment for RAC" section from Doc:362135.1
    -Configure PArallel Concurrent Processing(PCP)
    Thanks,
    Sandeep

    (Considering that there are only 2 nodes the scenario the steps would be as follows:
    1. Install RAC using the steps provided at the link:
    http://oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
    2.On RAC1 create a single instance of Oracle 11i (Both DB and Apps are on the same node)
    3. Follow the steps outlined in the Note:362135.1
    One thing to note is that the steps are the same whether the nodes are real or virtual.

  • What are the steps of EBS 11i with database 9i cloning steps in WInd 2003.

    HI,
    Please provide the any metalink doc or private blog url for clonning the EBS 11i with database 9iR2 in windows 2003 OS.
    Regards

    Please provide the any metalink doc or private blog url for clonning the EBS 11i with database 9iR2 in windows 2003 OS.Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]
    Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
    Please search the forum before posting similar questions as we answered this question many times in the forum before.
    Thanks,
    Hussein

  • Load Balancing with 10g RAC

    Hi,
    I have one query regarding balancing load with RAC.
    We have some batch processes executed from shell script in Oracle RAC environment where a separate node is used for failover only. There are some issues related with performance. We are looking for a solution to utilize 'idle' node used for failover to resolve this issue.
    I want to know whether the below mentioned scenario is possible to achieve with 10gRel2 RAC.
    A batch process is running and it is utilizing all resources (CPU) of instance 1, then it is possible by any means that this process be split and distributed to idle instance 2 on another node?
    Looking for expert advice.
    Regards
    Amit

    Hi Amit,
    I;ve done lots of RAC implementations, and it;s critical to set-up the primary node accordig to the "type" of table access. For example, cistomer queries on node 1, order queries on node 2, etc. Minimizing pinging is very important!
    Staring in Oracle 10g release 2, Oracle JDBC and ODP.NET provide connection pool load balancing facilities through integration with the new “load balancing advisory” tool. This replaces the more-cumbersome listener-based load balancing technique.
    I have more notes here:
    http://www.dba-oracle.com/oracle10g_tuning/t_grid_tuning.htm
    Hope this helps. . .
    Donald K. Burleson
    Oracle Press author

  • EBS 11i with SSO error

    After a successful (apparently) SSO integration with EBS 11i, I tried to connect for the first time as sysadmin and I receive these messages:
    Your Oracle E-Business Suite account has not been linked with the Single Sign-On account that you just entered. Please enter your Oracle E-Business Suite information. The next time you sign on with your Single Sign-On account, it will automatically sign you on to the Oracle E-Business Suite using the following account information.
    When i enter the EBS valid credentials it gives me the following error:
    Unable to link account. This E-Business Suite user account is marked as a local account..
    Could anybody explain what is happening here ? How could I connect as sysadmin ?
    Thanks,
    Paul

    Hi Paul,
    I used
    http://servername.domain:port/OA_HTML/AppsLocalLogin.jsp ... and this redirect me to the SSO as well.
    AppsLocalLogin.jsp shouldn't really do that. :-)
    Things to try, if you have not already:
    On the client side, clear your browser cache, and restart your browser.
    On the server side, you might need to recompile JSP files using $FND_TOP/patch/115/bin/ojspCompile.pl (with the --flush option), then bounce Apache.
    Regards,
    John P.

  • Oracle11g CRS with 10g rac db

    Hi
    can I use oracle11g CRS along with 11g/10g RAC databases together? Are they compatible.
    Thanks
    SS

    Absolutely. As far as you have the CRS at the highest version, you can have Oracle RAC databases with different versions (lower than CRS Version).
    HTH
    Thanks
    Chandra

  • EBS 12i with 10g AS (10.1.3)

    Hi gurus.
    10g AS comes with ebs 12i,, is external deployment is possible in it
    Regards
    Amar

    Hi,
    Just to update we were able to do external deployment,

  • MSA 1000 HP Storage with 10g RAC

    Hi All,
    We are planning to install Oracle 10g R2 2 node RAC using 2 DL580 servers as 2 nodes and HP Storageworks MSA1000 as the shared storage for ASM. The OS is RHEL 4 Update 4. Are there any packages need to installed or steps to be followed for MSA 1000 on linux to use as a shared storage in RAC?
    Thanks,
    Praveen

    Hi, Thanks for the response...
    We are supposed to install it in one our client place, And client has Fibre channels to connect DL580 servers to HP Storageworks MSA 1000 shared stoarge. As per the link which you have given, in that it is mentioned that iscsi is an alternative to Fibre channel. and also, it is mentioned that, there are some packages installed which are related to FireWire in order to support dual logins from both nodes. my doubt is..are there any packages to be installed in-order to use MSA 1000 as shared storage with Fibre channels?
    Thanks,
    Praveen

  • EBS 11i hot backup

    Hi experts,
    I am doing hot clone of my ebs 11i with 10g db.
    all dbf file have copied control file is created with using trace on TEST...
    db is now on mount stage
    when i trying to recover gettign this error....
    SQL> recover database using backup controlfile until cancel;
    ORA-00283: recovery session canceled due to errors
    ORA-01110: data file 65: '/d02_testdbx/oracle/testdb/testdata/csdd01.dbf'
    ORA-01201: file 1 header failed to write correctly
    ORA-283 signalled during: ALTER DATABASE RECOVER database using backup controlfile until cancel ...
    Please suggest what to do ?????
    os is AIX
    thanks

    Hi;
    Please check below and see its helpful:
    Rman Duplicate Error When Creating Standby Database Rman-11003 Ora-1157 [ID 306092.1]
    Also check:
    OERR: ORA 1201 file header failed to write correctly [ID 18773.1]
    How to clone/duplicate a database with added datafile with no backup. [ID 292947.1]
    ORA-01110 ORA-1122 ORA-01251 When Restoring With a Backup from a Standby DB [ID 743101.1]
    MPP: (RDBMS) ORA-1124 ORA-283 ORA-1110 ON RECOVERY [ID 1031379.6]
    RMAN TSPITR Fails with ORA-283 [ID 241237.1]
    Hope it helps
    Regard
    Helios

  • Apps 10g singale node to 10g RAC upgrade

    Hi Friends,
    I am planing to upgrade my Apps 10g singale node to 10g RAC. If you have any good document for this please share with me.

    Pl identify exact OS, database and EBS versions. Pl see these MOS Docs
    Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
    Step by Step Guide to configure Oracle Applications Release 11i with 10g R2 RAC and ASM [ID 731278.1]     
    Configuring Oracle Applications Release 11i with 10g RAC and 10g ASM [ID 312731.1]     
    HTH
    Srini

  • 11i Rapid Clone Not Certified With 10g/11g RAC???

    Metalink document 230672.1, "Cloning Oracle Applications Release 11i with Rapid Clone" was updated Feb. 2009 with the following:
    February 04, 2009
    - Added 11i/10g/11g RAC clarification on Section 4 Steps 6 and 7.
    - Corrected incorrect format statements.
    The clarification?
    Attention: The following steps apply only for 9i RAC Clusters. Rapid Clone is not certified for Cloning 11i with 10g or 11g RAC Systems at this time.
    10g RAC support for EBS has existed for quite a while, what's up with this? I'm in the middle of upgrading my 11i EBS on 9i RAC environments to 10gR2 RAC.
    Anyone cloning 11i with 10g/11g RAC? How are you doing it?
    Disgusted,
    Jerry

    Take a look Doc ID: 230672.1 on Metalink Section 6 talks about Cloning a RAC system
    If you're trying to search for anything on EBS look for Applications 11i, because most docs refer to it as Applications 11i more often then EBS.
    Cloning Oracle Applications Release 11i
    with Rapid Clone

  • Upgrade Linux Server for EBS 11i

    Hi All,
    EBS 11i
    RHEL 4.6
    Our EBS 11i is currently running on HP server with RHEL 4.6 OS and a single node only. This server was bought 6 years ago and lately it is showing performance degradation. We want to migrate/upgrade to a higher end latest model of HP and make it a multi-node. But the latest HP model only support a minimum RHEL 5 version.
    My question is, is cloning EBS 11i from RHEL 4.6 to RHEL 5 supported? How do I migrate EBS 11i with this kind of scenario?
    Thanks a lot
    Sis Inday

    Hi,
    My question is, is cloning EBS 11i from RHEL 4.6 to RHEL 5 supported? How do I migrate EBS 11i with this kind of scenario?It is supported -- Use Rapid Clone (go through the docs referenced in this thread).
    Cloning EBS 11.5.10.2 from RHEL 4 (32 bit) to RHEL 5 (32 bit)
    Re: Cloning EBS 11.5.10.2 from RHEL 4 (32 bit) to RHEL 5 (32 bit)
    Thanks,
    Hussein

  • Latest BNX2 driver crashes 10g RAC nodes

    I have a situation with 10g RAC on SLES-9 on HP Proliant 580 servers where sqlnet load balancing with jumbo frames works fine until the latest bnx2 Broadcom drivers (1.7) are applied. There are intermittent node crashes after load is generated on the RAC system (11i E-Business Suite). The crashes are 100% repeatable using hammerora and a load balanced sqlnet entry.
    HP is claiming the crashes are an Oracle problem, but the crashes go away when the older bnx2-1.6 drivers are reloaded.
    Anybody else having issues with the latest Broadcom drivers with RAC?

    Hi mdtaylor
    It seems that oracle (at least with redhat on a DELL server) is using those drivers http://www.oracle.com/technology/tech/linux/validated-configurations/html/vc_dell6950-oel4-rhel4-md3000_1.html.
    What about asking people on the suse forum http://forums.opensuse.org/ or if you have support make a service request at Suse?

  • Upgrading ebs database from 10g to 11g

    Hi,
    By following Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0.1) [ID 1265268.1]
    i am doing a test upgrade.
    As part of upgrade, only the oracle home location is changed. sid, host and port all are same as previous.
    After running dbua, for autoconfig, changing the OH path in xml file and run autoconfig is fine? or any other steps are needed?
    Thanks,
    Kavitha

    Hi,
    Could you please tell us which step you are refering to in the document. During upgrade you do not have to change the ORACLE HOME any where in XML file
    But you need to run perl adbldxml.pl
    As mentioned in step 22 of "Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0.1) [ID 1265268.1]"
    On application tier
         Source the env file
         $$ADPERLPRG $AD_TOP/bin/admkappsutilpl
    Copy appsutil.zip to $ORALCE_HOME/.
    Unzip –o appsutil.zip
    cp –r $11g oracle home <which came with rapidwiz> $ORACLE_HOM/appsutil/jre
    On the database tier
    Source database env file
    Export JRE_TOP=$ORACLE_HOME/appsutil/jre
    $cd $ORACLE_HOME/appsutil/bin
    $perl adbldxml.pl
    $sh adconfig.sh
    Thanks
    Edited by: user11970143 on Aug 26, 2011 6:22 PM

Maybe you are looking for