ECC 5.0 / BI - RSA5 Datasources
Hi,
Can anybody please tell me the difference between datasources found on RSA5 on ECC side and on BI side.
Thanks,
JB
Hi,
Standard datasources available in RSA5, whatever required datasources first u will check in RSA6 of src system , if it is not there then u have to activate in RSA5.
Replicate to BW after activating, these datasources u will assign to infosources.
Best Regards,
SG
Similar Messages
-
BW Myself source system in ECC 5.0 while Export DataSource!!
Hello BW Experts,
When we do Export DataSource for a DataMart eg:ODS, we have to again select our Myself BW source system and replicate our datasource to see it visible in the infosource tree with our DataMart name starting with 8*.
Plz clarify these Qs:
1. Can we perform "Generate Export dataSource " for customer generated DataMarts and replicate them in Myself BW source (Other than Business Content DataMarts??)??
2. Which is the Myself BW system in the ECC 5.0 version as everything is integrated and used being the source system as T90CLNT800 with the client 800and with a single userID and password.
Note:I could not find my generated Datasource for my customer generated DataMart to replicate the same using T90CLNT800 context menu.
Plz throw some light on this!!
regards,
Sapster...Points will be awarded.Hi,
You dont need to replicate the datasource after the generate export datasource. You can find your 8* datamart in the infosource by using any of these 2 methods:
1. Goto the top most of the info-source i.e. "Infosources" -> right click -> Insert lost nodes. You should be able to find your datamart.
2. Goto settings (menu) -> Display generated objects -> show generated objects.
Hope this helps.
Bye
Dinesh -
Hi Experts,
I was trying activation of 0TCTAUTH Datasource from rsa5.
I clicked on it and pressed Activate Datasource.
It got activated.I can see the records in rsa3.But when I replicate it, I cant see the Datasource in BW.
Am i missing any step?
Thanks,
SenoyHi
http://help.sap.com/saphelp_nw70/helpdata/EN/43/5fc0680a876b7de10000000a422035/content.htm
in Source System,
1).RSA5 0TCTAUTH Datasource ACTIVATE the dataosurce.
2).RSA6 which is post processing Data Sources,select 0TCTAUTH Datasource and press trasport button to release from source system.
3)RSA3 which was extractor checkor to check the data
In BW,
1).Goto RSA1 >Select Source System>and say replicate meta data/data source --->> after you gets msgs states like
all tree data structures are refreshed in bw.
2)refresh the screen in BW side and i thk you can find the your 0TCTAUTH Datasource from source system .
I think this will solve you.
mahesh -
hi
what is main use of 2lis_03_s832 and 2lis_07_s516Hi Suneel,
Check below threads:
List of data sources and extract structures in LO
Diff. between Last Goods issue date and Last consumption date
Regards,
KK. -
How to Make a Copy of Datasource 0CO_OM_OPA_6 in ECC?
Hi there,
I am facing a scenario where I need to create a new datasource that is the same as 0CO_OM_OPA_6 in ECC. Looking at the datasource, it mentions that it extracts the data using function module BWOMD_GET_ORDCSTA1. However when I try to use that function module, it requires an extract structure.
When I look at the datasource to see which extract structure the business content one uses, the field is blank as is the function module field.
My question is: Is it possible to use the same function module as the business content, or will I have to create my own? If it is possible, where can I find the extract structure that the business content uses?
Thanks in advance for any help provided.hi,
for using the same Functional module u will have to copy the Function Group and
create a custom function group.Then u can go ahead and use the copy of this Function module.
Changing the standard function module will not be a wise move.
thanks. -
How to activate business content extractor for masterdata in ECC 6.0?
Hi Experts,
I have a small problem with the extracttor 0PS_RESPNO_TEXT in ECC 6.0?
If i try to open it in RSA2 / RSA6, it says that active version not available. When i check in the developement system, i have it as modified version.
For this problem, I hope activating this in Development and transporting to Prodction should fix.
As far as i know, activation of sap delivered extractors can be done through SBIW or RSA5. But i have not done this before.
Can anybody please help me with step by step procedure to activate this and also what are the precautions and checks that need to be preformed?
Thanks & Regards,
Asrar Ahamed MAIt depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment. -
I am not able to find DataSource 3FI_SL_09_TT in SAP R/3
Hi All,
I am not able to find DataSource 3FI_SL_09_TT in SAP R/3
We are on SAP R/3 ECC 6.0 with Support Patch 15
I want extract the GLT3 table data, I found the above Datasource but, I am not able to find in the RSA5 trasaction code in R/3
Please sugggest
Thanks In Advance
Nilesh LabdeUnlike most DataSources, the 3FI_SL_XX_TT (where XX refers to the Special Ledger - in your case 09 it appears) DataSources have to be generated, instead of being activated in RSA5. To generate the 3FI_SL_XX_TT DataSource for Special Ledger 09 in your ECC source environment, do the following:
1) Go to tcode BW01 in your source ECC environment to generate the DataSource for Special Ledger totals (and line items if you so choose). Be sure to read and follow the directions in a popup that appears when you first enter this transactiont. Basically your refreshing two SAP delivered tables in order to use enhanced functionality for Special Ledger.
2) Upon successful generation of the DataSource, you will then want to create the InfoSource for the Ledger by going to tcode BW03 in your source ECC environment.
Here's some documenation on this: {http://help.sap.com/saphelp_nw70/helpdata/en/6c/743e404e093d3ce10000000a155106/frameset.htm] -
Hello Friends,
Need input from you with regards to the Problem/Solution mentioned below:
Our requirement is that during the load of FI data from our Centralised ECC System, we want to retrieve the Billing document details from a new ECC System. Since we need only the Billing Doument and Count of Item data from this new ECC System we dont want to proceed with the regular way of Establising Source System connection and creating new Datasources etc.
The Solution we have thought is to set up a RFC Connection and Execute a Function Module during the Routine execution in BW. Thie Function Module will be executd in the new ECC system and will retrieve the required Billing details.
If you have faced similar situation and implemented any other solution then please let me know.
Any help is appreciated!
Regards,
Nitin S.Hi Nitin ,
The solution sounds good . The only problem which i found in this is suppose for any reason your RFC does not work for a day or two . Then the FI data will be loaded without billing information . It will be a difficult task to reload the FI data again for the missing Billing Information .
I assume that your FI postings are happening in Centralized ECC while correspong Billing Docs are in New ECC . So the two ECCs have a RFC conncection between them :
Following approaches can be taken :
1) As per your solution you are going to call the RFC in BI . Instead of doing it in BI , do the same thing in the enahncement of the FI Datasource i.e make a call from centralized ECC to your new ECC . This will affect the extraction performance , but your loading performance will be improved .
2) Is there a possibility that you can flow your billing documents to your centralized ECC and then do a datasource enhacement of the FI datasource .
Hope the above reply was helpful.
Regards,
Ashutosh Singh -
Pulling of Exchange Rate data from ECC to BI
Hi All,
we are having an requirement to pull TCURR Table Exchange Rate data from ECC to BI.
If anybody worked on this scenario could you please share valuable inputs regarding this.
I gone through this SDN forum link: Re: Automated Exchange Rate Loading in BPC NW ( please share some more details regarding this )
Regards
AmitHi All,
I hope this will help you to pull Exchange rate data from ECC Table : TCURR to SAP BI System.
ECC Steps : Creation of generic datasource
1) Create generic Transaction Data source Using TCode : RSO2 with name ZTCURR and then press create Button.
2) Input Applic. Component: FI-GL and give description.
3) Input View/Table: TCURR and Press save Button.
4) This will take you to extract structure of data source ZTCURR. In this structure select respective field from the selection field option (In future we will use it in BI info package) and then press save button.
5) Use Tcode: RSA3 to check the data by giving custom data source ZTCURR name.
Note:In this case we are extracting full data from TCURR table. If your project demands you can use delta specific field.
SAP BI 7 Steps
1) Go to BI system, TCode: RSA1--> Source System-> Replicate metadata, then you can see generic data source "ZTCURR" in your BI data source tree.
2) Maintain Info cube Structure same like table : TCURR,
ECC Field ECC DATA TYPE BI Field BI Data Type
KURST CHAR -
> ZKURST CHAR (Length 4)
FCURR CUKY -
> ZFCURR CHAR (Length 5)
TCURR CUKY -
> ZTCURR CHAR (Length 5)
GDATU CHAR -
> ZGDAT CHAR (Length 8)
UKURS DEC -
> ZUKURS NUMBER ( Key Figure )
FFACT DEC -
> ZFFACT NUMBER ( Key Figure )
TFACT DEC -
> ZTFACT NUMBER ( Key Figure )
=========================================================================================
3) Conversion of default format "YYYY/MM/DD" to "YYYYMMDD".
In Transformation: "GDATU" is number format, not date format, so we need to write start routine in transformation.
With the Help of below code you can convert default format
"YYYY/MM/DD" to "YYYYMMDD".
DATA: DATE TYPE CHAR10,
L_INDEX TYPE SY-INDEX.
LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
L_INDEX = SY-TABIX.
CALL FUNCTION 'CONVERSION_EXIT_INVDT_OUTPUT'
EXPORTING
INPUT = <SOURCE_FIELDS>-GDATU
IMPORTING
OUTPUT = DATE.
CONCATENATE DATE+6(4)
DATE+3(2)
DATE+0(2)
INTO <SOURCE_FIELDS>-GDATU.
MODIFY SOURCE_PACKAGE FROM <SOURCE_FIELDS> INDEX L_INDEX TRANSPORTING GDATU.
ENDLOOP.
Note : Customize above ABAP code according to your client requirement.
==============================================================================================
4) Calculation of Month End Rate----> Means last working day of month
Please refer below solution ( sent on 3rd June 2011 ) to calculate Month Rate
Go to BI transformation and write formula in ZGDAT field. In this case add GDATU as source field of rule and write below formula.
*Last working day of month Formula * : LAST_WORKINGDAY_MONTH( GDATU, '' )
Last working day is calculated based on the data maintained in the ECC TCODE : SCAL ( SAP Calendar )
==============================================================================================
5) CALMONTH calculation: conversion of YYYYDDMM format to YYYYMM format.
This below given ABAP code helps you to convert GADTU: YYYYDDMM format to CALMONTH : YYYYMM format.
In BI transformation write field routine in CALMONTH field to display date in this YYYYMM format.
DATA : L_GDATU TYPE tys_SC_1-GDATU.
CLEAR L_GDATU.
CONCATENATE SOURCE_FIELDS-GDATU0(4) SOURCE_FIELDS-GDATU4(2)
INTO L_GDATU.
RESULT = L_GDATU.
Regards
Amit
Edited by: amit_sap_n on Jul 20, 2011 1:54 PM -
I have this routine in a BI transformation routine
select single CONTACTNAME INTO RESULT FROM THREIC_CONTACT WHERE CONT_GUID =
source-system-cont-guid.
Error : THREIC_CONTACTNAME not recognised
Any ideas how to call the table.BI and ECC are different systems. You can not just call the table from outside of the BI system that way.
What you can do is simply:
create one datasource in your ECC system using THREIC_CONTACTNAME table.
Then load data to an ODS or some master data.
Now, you can refer to the table ( active data table of the ODS, or P/Q/X/Y tables of the master data) and use select statement.
Another possible way can be, if you are trying to write this routine for some data you extract from ECC, you can enhance your datasource to make this control in R3 side.
May be Guru's have another idea.
Hope this helps
Derya -
Change Source System client for BI datasources
Friends,
We have created/migrated datasources in QA system using existing SAP Source System, for example, ECC Client 320. Now we want to change the SAP Source System to the different client, for example, ECC Client 330.
All datasources are already created when connected to old Source System (ECC Client 320). The new requirement is to extract the data from new client, from ECC Client 330. We like to change this seamlessly without impacting the data loads, full as well as delta.
Any ideas as to how to accomplish this please?
Regards,
Upender KadireHi,
The client mentioned while creating source system in BW is to be changed.
Go to the RFC Destination created for R/3 system in BW and change the client.
Now regarding the delta, the delta has to work fine, as BW system is Client independent. It looks for the Source and bring data.The delta queue is maintained in R/3.if you change the client, the delta will be picked from the new client.
Happy Tony
Happy Tony -
DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SF
Hi Experts,
I'm trying to activate a datasource 0PM_SCH_PLND_ORDER Scheduling Overview and Planned Order in ECC, but got this error:
DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
Please help. Thanks!
TingHi,
I am having the same problem when I try to activate the datasource 0PM_SCH_PLND_ORDER. Can you please let me know how did you resolve the problem?
Thanks,
SB -
How to use/declare actual and formal paramters in ECC 6.0?
Experts,
I am new to ECC 6.0, and
Please help me how to pass workarea in actual parameters ( I need to use USING/CHANGING or TABLES ? please correct me ).
And in FORM logic_4_ord_status, how to declare work area and variables in formal parameters signature ???
I have declared:
TYPES : BEGIN OF ty_869_input_rec,
rec_type(2) TYPE c,
cntrl_no(50) TYPE c,
rep_flag(1) TYPE c,
edi_tr_par(16) TYPE c,
sap_cust_no(100) TYPE c,
brd_idfr(4) TYPE c,
canc_date(8) TYPE c, " Promised to ship by date
po_no(18) TYPE c,
cust_cntrt_po_no(18) TYPE c,
selection(2) TYPE c,
END OF ty_869_input_rec.
TYPES : BEGIN OF ty_870_output_rec,
rec_type(2) TYPE c,
cntrl_no(50) YPE c,
rep_flag(1) TYPE c,
edi_tr_par(16) TYPE c,
sap_cust_no TYPE vbeln_va,
brd_idfr TYPE vkorg,
po_no TYPE bstnk,
cust_cntrt_po_no TYPE bstnk,
selection(2) TYPE c,
END OF ty_870_output_rec.
Internal table declarations.
DATA : gt_869_input_rec TYPE TABLE OF ty_869_input_rec,
gt_870_output_rec TYPE TABLE OF ty_870_output_rec.
Workarea declations.
DATA : wa_869_input_rec TYPE ty_869_input_rec,
wa_870_output_rec TYPE ty_870_output_rec.
DATA : lv_order_qty TYPE wmeng,
lv_cancelled1 TYPE wmeng,
lv_cancelled2 TYPE wmeng,
lv_delivery TYPE lfimg,
lv_open_qty TYPE lfimg,
lv_neworderqty TYPE lfimg,
lv_pickedqty TYPE lfimg,
lv_unshipped_qty TYPE lfimg.
perform logic_4_ord_status
USING wa_869_INPUT_REC
lv_order_qty
lv_delivery
lv_open_qty
lv_j_3acada
lv_j_3arqda
lv_cancelled1
lv_zzactcnt
lv_zzstatus
changing wa_870_output_rec
form logic_4_ord_status
using p_wa_869_input_rec type TY_869_input_rec
p_lv_order_qty
p_lv_delivery
p_lv_open_qty
p_lv_j_3acada
p_lv_j_3arqda
p_lv_cancelled1
p_lv_zzactcnt
p_lv_zzstatus
changing p_wa_870_output_rec type TY_870_output_rec
IF p_lv_delivery LE '0'
AND p_lv_Open_Qty GT '0'
AND ( p_wa_869_input_recu2013canc_date <> p_lv_j_3acada )
AND ( p_lv_zzactcnt = 'F' OR p_lv_zzactcnt = 0 ).
p_wa_870_output_rec-shp_ord_status = 'RD' .
p_wa_870_output_rec-order_qty = p_lv_order_qty.
p_wa_870_output_rec-open_qty = p_lv_open_qty.
FOR 1st 'SC'
ELSEIF p_lv_delivery LE '0'
AND p_lv_Open_Qty GT '0'
AND ( p_lv_cancelled1 GT '0' )
AND ( p_lv_zzstatus = 'F'
OR p_lv_zzactcnt = '0' ).
I could not declare actual and formal parameters correctly .
Kindly help me.
I am getting error at p_wa_869_input_recu2013canc_date.
Please validate me ...
THANKS IN ADV.It depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment. -
HI ALL
what is implementation project ?
what i think ecc to bi implementation means bi side bi content installation . could plz anbody tell this ansHi,
Implemetation means build the datawarehosing solutions (BI) to the customer.
Implementation means developing the reports based on the customer requirement.
In this context, from BI side, we need to develop the BI dataflow(modeling which includes BI objects) as per the customer reuirement.
from ECC side, we need to configure the BI related stuff in ECC side(Like installation of Datasources.. etc).
Here also sap has give ready-to-use solutions from the business content.
By default sap has give ready-to - use solutions (i.e. called business content in BI point of view) If the customer requirement is exactly matching with the content solution, we can directly implement standard scenarios.
If not, we need to develop customized objects.
Hope it clear.
Thanks
Edited by: satya prasad on Mar 27, 2010 6:32 AM -
Records are repeatedly loading for RDA DataSource
Hi
Iam trying to load the data for custom datasource into DSO . This datasource is real time enabled one .
Eventhough there is no new records are created in ECC system , the real time datasource getting the same number of old reocrds dailiy . I mean , the records are repeatedly loading into the DSO object .
Why the records are repeatedly loading into the DSO object for real time datasource .
Please let me know
Regards
mohammedHi,
In RSO2 click on a'GENERIC DELTA' and select the Time stamp and give the lower limit and upper limit
and if you are loading the data into DSO then select the radio button is "New Status of changed record"
if you are loading the data into CUBE then select the radio button is "Additive Delta".
Regards,
Yerrabelli.
Maybe you are looking for
-
Unable to Install VS 2013.4 on Windows 7 SP1 system
Over the last few day and long nights, I have tried several times to load VS 2013.4 on my Win 7 Home Premium SP1 PC with no success. I have tried several packages including VS Community, Web, and Desktop. Tried multiple download sites and even copi
-
Iphone 3g no longer connecting to wifi
I have a iphone 3g which has the lastest upgrade 4.2.1. I updated the phone to this latest version in March 2011. 2 days ago my wifi has stopped working. It just says its not connected and when its trying to scan for networks nothing happens. I h
-
Hi All, i have a FICO AP report , in which i have vendor number as the variable , v can view the report based on the vendor number but now the user says since its difficult to remember the vendor number he should be able to key iin the vendor name
-
I use images of paintings for presentations. Over the last 3 months or so I've noticed that I cannt copy images (either JPEg or TIFF) without a reduction in sharpness and definition. Hope someone can help with this problem.
-
I know this is out of the Java scope but I am sure there are many SQL experts in this forum, I was just wondering whether anyone can point me to the right sources for learning how to write better SQL and hence faster execution. I tried google and mos