ECC 6.0 - EHP4 - Client Import

Dear Experts,
This is a reimplementation project. Previous company has installed & configured ECC 6.0 - DEV/QAS systems (ABAP stack only).
Now, we want a fresh installation of DEV/QAS servers with ECC 6.0 - EHP4.
The management wants to restore all the developments & customizings of the old DEV system (done by previous implementing company) in one of the clients after the fresh installation of ECC 6.0 - EHP4.
My confusion is that if I take a client export of the existing DEV client & then reinstall ECC 6.0 with EHP4 (ABAP+JAVA stack), then will I be able to import the client export data (please note that this old client was ABAP stack only with no EHP) into this new server?
Please help me on this. What will be the way forward for this scenario?
Thanks & Regards,
Ashish Khanduri.

Hi,
As rightly said above for ECC 6.0 with EHP4 you cannot install dual stack. You have to install ABAP and JAVA separetly. So, what I could suggest is
1) Your current ECC system instead of installing it freshly with ECC EHP4 and Importing client of old system (which is not recommended as there is lot of difference in patch levels) you directly apply EHP4 in current ECC system (which is ABAP) only.
2) If you need JAVA stack of ECC EHP4 then tale separate server and install it separately which will not have any impact on ABAP system.
Thanks & Regards,
Sharath

Similar Messages

Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and 51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
Julia

Hello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia

SAP ECC 6.0 EHP4 Compatible with MDSD 3.0?

Hi Folks,
Is SAP ECC 6.0 EHP4 compatible with MDSD 3.0? I have read the documentation but its not clear for me if this would be possible.
It says that MDSD 3.0 is compatible with SAP ECC 6.0 EHP3, but i would like to know if compatible with EHP4.
Thanks for your help.
Regards,
Gilberto Li

Hi Gilberto,
yes, this should work fine. We just have one client who did the upgrade and he has not experienced issues up to now - even he is still in testing phase.
Regards,
Oliver

SAPinst stuck while installing ECC 6.0 Ehp4 - check sum error

Dear All
I am installing ECC 6.0 EHP4. While installing i am stuck in 4th step Unpack SAP Archives.
error log from SAPinst is below:
ERROR 2011-12-14 16:19:03.118
 CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
TRACE 2011-12-14 16:19:03.118 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-12-14 16:19:03.196 [sixxcstepexecute.cpp:950]
FCO-00011 The step unpack with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|unpack was executed with status ERROR ( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).).
TRACE 2011-12-14 16:19:03.227 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option Enhancement Package 4 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/. </body></html>
Please suggest me how to remove this check sum error
thanks
sandeep

Hi,
ERROR 2011-12-14 16:19:03.118
CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
Above error implies some problem in extracting the OCL10264.SAR file from your DVD path.
There are 2 options
1) Try to extract that file manully using the command
 sapcar -xvf d:/ext/51036972/OCL_Windows_x86_64/OCL10264.SAR
 If this works, then try to update your SAPINST.EXE and repeat installation process
2) In case step 1 fails, then your source is corrupt. You need to re-download or recopy the Oracle Client DVD.
Hope this is useful.
Regards,
Deepak Kori

Create SSO on SAP portal to ECC 6.0 EHP4 backend

Hello,
I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security Provider --> Ticket.
Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
I attach a screen shot from Visual administrator.
Kind regards,
Richard Meijn
Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

Cahtal,
Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
If I write something wrong please correct me. I understand the following
So If I am on the "Authentication" tab I press the Add new button
In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
Kind regards,
Richard Meijn

How to schedule a client import ?

hi
i'm wondering if "client import" can be scheduled ? so far i can schedule for client deletion, client export ... but don't see the option to schedule client import.
my activities as below
a.) perform SCC8 at the source client to export the client.
b.) go to the target system to refersh STMS queue, the cofiles and data files will be copied to the target system STMS queue.
c.) transport the queue to new target client
d.) i wll be prompted to login to the new client, i will login as sap*
e.) once i click the button "import", the import process will start without giving any option to perform scheduling.
please advise other than SCC9 (remote client copy) is there other way of scheduling a client import.
comment and advice will be appreciated.
thanks.
regards,
Kent

Hi
I don't think that, there is any such option for client import through STMS.
Check SAP note 70547 for detailed procedure.
Rahul

IN tocde KEI2 time out error in ecc 6.0 EHP4

Hi All
A program termination occurs in the PA transfer structure maintenance. When you go to the "Source" level, the ABAP runtime error "TIME_OUT" occurs in ECC 6.0 EHP4
I have checked one note with same error Note 320621 - ABAP runt.err."TIME_OUT" in PA transf.struct maint but its valid for 4.6 c and its obsolete for ECC 6.0,kindly suggest

Dear Pranav,
Please apply note 1496366 “'Function' value is not carried out in view” in your system.
Then the time-out issue will be solved.
Regards,
Miya

Step by step process of client import

hi Experts
this is swathi, here i performed client export/import process(transport domain is same for both system)
client export over with warnings and i need for client import
below are my steps(performed) :
after client import, i copied those co-files and data files in to target system then
excuting t-code -stms_import in target system and checked in queue
then i didn't find my transport request in target file (stms_import)so i added my transport request in Extras>other requests>add
then it shows error description:
(transport control program tp ended with error code 0212)
ERROR:could not access file as supposed(see dev_tp or s)
what happened i dont know so please i need some help at this stage ,what can i do next

hi gagan deep,
i checked in target system tp system log
it shows
ERROR:/usr/sap/trans/cofiles/ST00003.CLL:cant open
:permission denied
now my question is
i copied cofiles and data files into target system this step is correct? if correct
i added in extras>others req->add ........this my steps is correct or any mistakes are their please reply me
if correct means now iam going to give permissions for target systems all data/co-files
(usr/sap/trans/cofiles/ST00003.CLL)
can go

Error in client import

hi Experts,
here i need some help for my present issue
about client import;
i finished client export with warnings
after i copied cofiles/data files from source to target system
in my target system we have 3 clients 333,222,444
i need to copy into 444
so after copying files
login into 444 client with sap*
and execute t-code stms_import and checked about my transport requests but not find
so i try to add it in Extrasother reqadd
but i get an error :
description is :
Transport control program tp ended with error code 0212
Error:could not access file as supposed (see dev_tp or s)
in tp out put it shows
error:/usr/sap/trans/cofiles/st0003.dev :cant open:permission denied
then i given 775 permission for all data/cofiles
then again i tried to add request but result is same
i don't understand what happen so please help in this issue

login into 444 client with sap
and execute t-code stms_import and checked about my transport requests but not find
so i try to add it in Extrasother reqadd
but i get an error :
description is :
Transport control program tp ended with error code 0212
Error:could not access file as supposed (see dev_tp or s)
in tp out put it shows
error:/usr/sap/trans/cofiles/st0003.dev :cant open:permission denied
Solution:Create a user with SAP_ALL and SAP_NEW profile and repeat the steps. SAP* cannot do/kick of any transport or creating of coflle and datafile.

Old Appraisal System (SAP R/3 4.7 ITS) upgrade to SAP ECC 6.0, Ehp4

Hello experts,
We are currently on SAP R/3 4.7 (using ITS) and will be upgrading to ECC 6.0, Ehp4 (using Netweaver Portal). This upgrade will be purely technical, no changes to existing talent modules.
Our employee performance appraisals are currently accessed via ITS using the Old Appraisal System. Can you tell me if it is even possible to link the old appraisal system to the NW portal?
If yes, what kind of changes are required here? Which iviews will I need to activate?
All of your advice is greatly appreciated. Thank you in advance.
Dina

hi,
THe old appraisal system runs on ITS , true .
In the new ECC 6 , there is a built in ITS , which should allow you to still run the old services . But it makes sense to explore the newer functionalites offered in EHP4.
Regards
sameer

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

Client import taking too much time

hi all,
i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
scc3
Target Client           650
Copy Type               Client Import Post-Proc
Profile                 SAP_CUST
Status                  Processing...
User                    SAP*
Start on                24.05.2009 / 15:08:03
Last Entry on           24.05.2009 / 15:36:25
Current Action:         Post Processing
- Last Exit Program    RGBCFL01
Transport Requests
- Client-Specific       PRDKT00004
- Texts                 PRDKX00004
Statistics for this Run
- No. of Tables             19803 of     19803
- Deleted Lines                 7
- Copied Lines                  0
sm50
1 DIA 542           Running Yes             SAPLTHFB 650 SAP*
7 BGD 4172   Running Yes 11479 RGTBGD23 650 SAP* Sequential Read     D010INC
sm66
Server No. Type PID Status Reason Sem Start Error CPU Time   User Report   Action          Table
prdsap_PRD_00 7 BTC 4172 Running   Yes    11711 SAP* RGTBGD23 Sequential Read D010INC
plz guide me why it is taking too much time , while it has finished most of the things
best regard
Khan

The import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
You can try to improve the speed by updating the table statistics for table D010INC.
Markus

ECC Upgrade from ECC 5.0 to ECC 6.0 EHP4 - impact on XI 3.0

Hi,
We are palnning for upgrade our ECC System from ECC 5.0 to ECC 6.0 EHP4. We do not have any plan of upgrade on XI, which is on XI 3.0.
After ECC upgrade please provide the impact on XI 3.0 ?
Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
Thanks.

>>Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
As far as I know, no change is required in XI configuration.
Regards,
Praveen Gujjeti.

Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

UPGRADE FROM ECC 5.0 TO ECC 6.0 Ehp4

Hai,
Can any one tell me the upgrade strategy from ecc 5.0 to ecc 6.0 Ehp4,also before we upgrade to Ehp4 do we have to upgrade to ecc 6.0 ?If no plz provide me with the link for latest documentation on this .
-regards
Srinivas Bitra

Hi Srinivas,
You can upgrade both in single shot.
You can include EHP4 along with ECC6.0 version upgrade. in BIND_PATCH phase upgade will prompts you to include EHPs if you want. so there you can include your EHP with SAP version upgrade.
You can get all these details in Upgrade guide.
-Srini

ECC 6.0 - EHP4 - Client Import

Similar Messages

Maybe you are looking for