ECC 6.0 installation o WIndows 2003 Ent R2 on SQL 2005
Hello Folks,
As mentioned in subject line, I am in middle of the installation. I have got error in phase "Run ABAP Reports".
The error is mentioned in the file dev_slic file which I have pasted below. It is not able to drop an index to create a temporary lisense.
"Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission."
Till the time I have already opened ticket with SAP.
Here is the dev_slic file -
>
trc file: "dev_slic", trc level: 2, release: "700"
SlicIGetDate: <20080413>
SlicPwForR3Setup: calc password out of <RPD20080413FJAWFNLTL>
SlicIGetDate: <20080413>
SlicSapInstall: sysname: >RPD< connect: >1< rollback: >1<
SlicIDbLock: first call to SlicIDbLock: initialize Mutex
db_con_init called
create_con (con_name=R/3)
Loading DB library 'dbmssslib.dll' ...
load shared library (dbmssslib.dll), hdl 0
using "D:\usr\sap\RPD\SYS\exe\uc\NTI386\dbmssslib.dll"
Library 'dbmssslib.dll' loaded
function DbSlExpFuns loaded from library dbmssslib.dll
Version of 'dbmssslib.dll' is "700.08", patchlevel (0.72)
function dsql_db_init loaded from library dbmssslib.dll
function dbdd_exp_funs loaded from library dbmssslib.dll
New connection 0 created
0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
db_con_connect (con_name=R/3)
find_con_by_name found the following connection for reuse:
0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
Thread ID:1884
Thank You for using the SLOLEDB-interface
Using dynamic link library 'D:\usr\sap\RPD\SYS\exe\uc\NTI386\dbmssslib.dll'
dbmssslib.dll patch info
patchlevel 0
patchno 72
patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
np:(local) connection used on RPDSERV
CopyLocalParameters: dbuser is 'rpd'
Using Provider SQLNCLI
OpenOledbConnection: MARS property was set successfully.
Provider Release:9.00.3042.00
Using Provider SQLNCLI
OpenOledbConnection: MARS property was set successfully.
Cache sizes: header 68 bytes, 100 names (157600 bytes), 100 dynamic statements (568800 bytes), total 726468 bytes
Initializing private procedure name cache.
procedure cache created/attached
Connected to db server : [RPDSERV] server_used : [np:(local)], dbname: RPD, dbuser: rpd
pn_id:RPDSERV_RPDRPD_RPD
Using MARS (on sql 9.0)
Connection 0 opened (DBSL handle 0)
ExecuteAndFlush return code: 0x80040e37 Stmt: [DROP INDEX MLICHECK.MLICHECK0 ]
ExecuteAndFlush: line 6324. hr: 0x80040e37 Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 3701, sev 11), Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 103 (dbcode 3701) on DDLExecute
DbSlExecute - <DROP INDEX MLICHECK.MLICHECK0 >
License index MLICHECK0 not found( - ok)
ExecuteAndFlush return code: 0x80040e37 Stmt: [DROP INDEX MLICHECK.MLICHECK__0 ]
ExecuteAndFlush: line 6324. hr: 0x80040e37 Cannot drop the index 'MLICHECK.MLICHECK__0', because it does not exist or you do not have permission.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 3701, sev 11), Cannot drop the index 'MLICHECK.MLICHECK__0', because it does not exist or you do not have permission.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 103 (dbcode 3701) on DDLExecute
DbSlExecute - <DROP INDEX MLICHECK.MLICHECK__0 >
License index MLICHECK__0 not found( - ok)
ExecuteAndFlush return code: 0x80040e14 Stmt: [DROP INDEX "MLICHECK~I1" ]
ExecuteAndFlush: line 6324. hr: 0x80040e14 Must specify the table name and index name for the DROP INDEX statement.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 159, sev 0), Must specify the table name and index name for the DROP INDEX statement.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 99 (dbcode 159) on DDLExecute
DbSlExecute - <DROP INDEX "MLICHECK~I1" >
ERROR => DBSL statement where error happend:
DROP INDEX ... [slicdb.c 2433]
ERROR Can not drop license index MLICHECK~I1
TIME Sun Apr 13 22:31:15 2008
RELEASE 700
COMPONENT SLIC
VERSION 300
RC 99
MODULE slicdb.c
LINE 504
DETAIL DbSlExecute failed with return code 99
Must specify the table name and index name for the DROP INDEX
statement.
COUNTER 1
Old license index not dropped...(rc: -111)
Database vendor is MICROSOFT SQL
License table created
License table created (rc: 0)
Index for license table created
License index created (rc: 0)
License table created (rc: 0)
Go and create a temporary license
SlicIGetDate: <20080511>
SlicCalcLicenseKey: key db/prod = >TEMPLICENSERPDINITIAL R3_MSS 20080511<
SlicIGetDate: <20080413>
License created as follows:
LICENSE DATA:
systemname: >RPD<
hardware-key: >TEMPLICENSE<
productid: >R3_MSS <
installation-nr: >INITIAL <
system-id: >INITIAL_SY<
userlimit: >0<
creation_date: >20080413<
expiration_date: >20080511<
lcheck_date: >19800101<
lkey: >8JU8CFNH4IKQLC7CJ2UUETJD<
fprint: >VTV96XNXYK97XYIA35ZFGISK<
Write license into database
The IRow interface is supported by this OLEDB provider
License >RPD< >TEMPLICENSE< >R3_MSS < requested from db
License >RPD< >TEMPLICENSE< >R3_MSS < not found in db
license does not exists, do a license insert
Try to insert inserted >RPD< >TEMPLICENSE< >R3_MSS <
License inserted >RPD< >TEMPLICENSE< >R3_MSS <
License written: >RPD< >TEMPLICENSE< >R3_MSS <
Temporary License written into database
SlicSapInstall sap-msgserver license ok.
db_con_commit (con_da={R/3,0,0},th_commit=0,tx=1,hold_cursor=0)
DbSlDisconnect curr_thread_id: 1884 sl_conn[0]->thread_id: 1884
Disconnected from connection con_da={R/3,0,0}
Regards,
SAT
Dear,
If your problem not get resolved please check SAP Note 44958 - IDES installation 3.0C, saplicense
As per SAP Note its advised you can drop database index and continue with your installation.
Regards,
Nikunj Thaker.
Similar Messages
-
Netweaver 7.0 SR3 install - x64 - Windows 2003(64-bit)/MS SQL 2005
I want to install Netweaver 7.0 SR3 on 64-Bit Windows 2003 Enterprise server with a SQL 2005 backend.
I downloaded packages 51033323_1, 51033323_2 & 51033323_3 and started the sapinst.exe utility in the 51033323_1\IM_WINDOWS_I386 directory.
I get the following error message: "You started an installation of software for platform I386, but SAPinst is running on platform AMD64."
I obviously have the 32-bit content but I require the 64bit install. How do I locate the 64-bit installation content.
Should I first install with the 32-bit install and then update the components to 64-bit? Or is there a standalone 64-bit installer and content?
ThanksUse below DVD's to install the Netweaver 7.0 SR3
51033493_1: - NW 7.0 SR3 Installation Export 1 of 2
51033493_2: - NW 7.0 SR3 Installation Export 2 of 2
51033508_15: - NW 7.0 SR3 UC-Kernel 7.00 Windows Server on x64 64bit
51033511_13: - BS2005 SR3 Installation Master Windows Server on x64 64bit
Thanks
Shambo -
SAP ECC 6.0 Behavior on Windows 2003 MSCS
Dear Experts,
I have SAP ECC 6.0 run on Windows 2003 Enterprise SP 64-bit Cluster (MSCS) and when we run testing on failover we got the following result:
All cluster groups in node1 - Shutdown Node 1 - Node 2 Up
- Whoever login to Node 1 will be disconnect during failover
- Whoever login to node 2 and run transaction during failover will be hang till failover done successfully
- Whoever login to node 2 and only run the transaction after the failvover done will not feell any disruption
- New logon session is failed until basis is bringing online the following in cluster administrator under SAP Group (SAP SID 00 Service & SAP SID 01 Service)
The same result if we shutdown Node 2 and all cluster group failover to node 1.
Both services are install local in each node and start option has been made "manual"
My question:
1. Is the above result is common?
2. Is there anyway to make SAP SID 00 & 01 to be automatic failover?
Regards
Rian WHi Rian Wisandano,
All your questions/queries looks common to me...
In any given scenario, resources both SAP & DB based resoureces have to be online for you to access/logon to the system using SAPGUI. And it's very common that, unless resources (either service or instance specific) are online at cluster level the corresponding resources in SAP MMC won't be online. In your query one of that was, about 00 and 01 services, YES they are 2 different instances of your SAP build and corresponding entries at cluster level.
And it's expected behavior that, while fail-over or fail-back of cluster resoureces from one cluster node to other cluster possible cluster node that, resources goes into offline and then mover over/move back and then comes online. So as its a thumb rule for given seconds/minutes (based on the resources) resources at cluster level will be offline before they come online. So during this time you will not be able logon to your SAP system because its not only cluster resoureces but also SAP MMC corresponding entries also will be offline....Along with cluster resources come online the resources/entreis in SAP MMC also comes automatically.
And it's correct to setup, Cluster Service to 'Manual' in High Availabilty Setup.
New logon session is failed until basis is bringing online the following in cluster administrator under SAP Group (SAP SID 00 Service & SAP SID 01 Service)
The same result if we shutdown Node 2 and all cluster group failover to node 1.
I hope this helps you to understand the behavior of cluster.
Revert back if any further clarification required.
Regards
Sekhar -
Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?
Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
Any help is appreciated.
Regards,
RaghavWe have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.
-
Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition
can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN
Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan -
Oracle 9i installation on Windows 2003 Cluster
Hi
I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.Complete Guide is here
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm -
Integrating SAP ECC 6.0 with Microsoft Windows 2003 Active Directory
Hi Gurus,
We are planning to integrate our SAP ECC 6.0 with Microsoft Windows 2003 Active directory.
I have several questions on this:
1. Can i authenticate all the users from SAP
2. It is used only for user authentication or can it be also used for password authentication
ie user can login using his windows password?
3. While integration in SAP does a separate table or a field is created in database.
4.If a employee leaves a company than in SAP is it possible to lock & deactivate the user automatically.
Thanks in advance.
Regards,
NiharHi Mastek,
You should be able to accomodate your needs with respect to integration of your AD accounts with SAP ECC ABAP. This can be done via LDAP connector configuration. The below has info on how to perfrom the configuration at a high level. You will have to integrate, and map certain user data. You may also want to do some LDAP Connector research:
[http://help.sap.com/saphelp_nw70/helpdata/en/10/1a063a15c611d4b61f0000e835363f/content.htm]
On the Java stack - you can also confugure UME to integrate/authenticate with AD:
[http://help.sap.com/saphelp_nw70ehp2/helpdata/en/12/7678123c96814bada2c8632d825443/content.htm]
Hope this helps! -
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtikHi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM -
NetWeaver and WTS on Windows 2003 Ent. 64bit Machine
Hi,
Does NetWeaver 7.0 able to install on an Intel Server (Windows 2003 Ent. 64bit) with WTS (Windows Terminal Server)? I try to check SAP note, SDN and Google but don't found any information about it. Thank you.
Cheer,
Sittidej K.I´m still not sure what you ask...
A SAP system is usually installed alone on the server, no MS Office, no SAPGUI - just the plain system. You can administer the system using WTS (which is a supported way) but you should not run other applications on the same server.
There were problems in the past with some applications that could not be configured using WTS (e. g. DCOM connectors and other CRM related things) but you always have the possibility of using the console or other 3rd party tools to access the system and configure it remotely (e. g. VNC for free).
Markus -
Physical to Virtual Migration Approach for Exchange CCR 2007 on Windows 2003 Ent Edition
Hi Team,
I am running Two exchange 2007 CCR in my environment on Physical node on windows 2003 ENT edition. MY Hardware is end of life and we are planning to migrate/Converting them into virtual environmnet running Vsphere 5.1.
can any one let me know the best approach to virtualize exchange CCR .
Exchange CCR details are :-
Windows 2003 Ent edition.
Excahnge 2007.
Quorum is configuraed on shared folder.
Exchange Primary replicating Data on Exchange Secondry ..Both Primary and Secondry are having Raid 10 Local Disks.Hi Ravi,
you can take a couple of approaches here. First off, I want to make sure you are not wanting to do a P2V conversion, that is taking the OS image that is running on the physical host and, using VMware Converter, create a virtual machine from it. You could do it that way but, depending on how much mail data is there it could take a long time and it's not the preferred approach for Exchange.
I'm going to make a couple of assumptions here:
I'm assuming upgrading to Exchange 2010 is out of the question (if it is not just do that and move mailboxes )
I'm assuming that there is plenty of storage in the vSphere environment to satisfy the requirements of Exchange. Obviously you would have to provide enough storage for all mail data x 2 if you want to continue with CCR.
Your message says "local disks", so I'm guessing the RAID 10 you mention is not available for use for these virtual machines and that you will provide some type of shared storage.
So, if you have enough compute within a vSphere cluster and enough storage (capacity and IO) to satisfy CCR I see two options:
Leapfrog approach
1. Shutdown passive
2. Evict passive from CCR cluster
3. Create new VM, Clustering services, Exchange/add as passive to the cluster (you could run setup in recovery mode /m:recoverserver, but I don't see why you would want to in a cluster)
4. Seed databases
5. Failover
6. Repeat for other physical
New Cluster
1. Create two new VMs
2. Create new CCR Cluster
3. Install Exchange active/passive
4. Move mailboxes
5. Decomm physicals
Obviously these are very high level but the approaches are straight forward. If this is your only set of Exchange servers in the environment you will have to account for any public folders/system folders, etc. Take some time and check out compute usage in the current environment so you are sure you have plenty of compute in the vSphere environment, especially if you are moving into a shared environment.
-alex -
Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server
HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names. -
Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem
Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
DiwakarOPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here. -
Problem Oracle 10g database Installation on Windows 2003 Server
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names. -
Error while running setup.exe for oracle installation on windows 2003
Hi,
I am trying to install oracle 9.2.0.1 on my windows 2003 machine and when i click on setup.exe nothing happens. when i tried to run it thru command prompt again nothing happens when i check in computer management => event views it throws following error.
The application, C:\DOCUME~1\barb\Local Settings\Temp\1\OraInstall2006-08-11_05-19-46AM\jre\bin\javaw.exe, generated an application error The error occurred on 08/11/2006 @ 05:19:56.356 The exception generated was c0000005 at address 6D4CF9A0 (jvm!JVM_TraceMethodCalls)
can anybody suggest me what could be the problem or i will have to install jvm first and then try installing oracle?
thanks
Chandandid you check the installation guide and Preinstallation Requirements?
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#i1011417 -
11.5.10.2 Installation on windows 2003 server Cygwin Software.
Hi
I used Cygwin instead of Mks tool kit in apps 11i(11.5.10.2) on windows 2003 server. Installation is completed succefully. I am able to open the forms without error. But while patching I am facing problem. for testing the Cygwin implementation I tried to relink FND programs. I got the error the error message is as follows.
set EnvAdrelink:Error:Cannot Open registry key: \SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
contents of error buffer are:
"usdsop cannot create a new process
cause: usdsop encountered an error creating a new process. [Reason].
Can anybody help me the process.
Regards,
chennus.
Edited by: chennus on May 28, 2012 2:01 PMHi Saawan,
Now I format the system and Installed fresh application 11i(11.5.10.2) on windows 2003 EE.Now I select the prerequest software as visualstudio 2008 Express Edition and VC++6.0 redistributable package x86 (Doc ID 1095124.1), Mks toolkit I used 8.1 version and Gnumake I used 3.78.1(Doc ID 268776.1). The Installation is completed Successfully. The application is working fine. While i want to test the adrelink using adadmin I got the following error. adrelink is completed with status 1 and it is completely exit ( Not finished the script and come to command prompt) Here i am enclosing the adrelink log file.
You are running adrelink, version 115.14.11586.3
Start of adrelink session
Date/time is Tue May 29 16:55:24 IST 2012
Log file is E:/oracle/prodappl/admin/PROD/log/adrelink.log
Command line arguments are
"force=n" "ranlib=y" "link_debug=n" "filelist=E:/oracle/prodappl/admin/PROD/out/alkfnd000.txt"
Operating System Information (output of 'uname -a'):
Windows_NT TEST 5 02 586
Backup Mode is "file"
Removing Application products' bin directories from PATH ...
Done removing Application products' bin directories from PATH
Removing $FND_TOP/$APPLBIN from PATH ...
Done removing $FND_TOP/$APPLBIN from PATH
ORACLE RDBMS Version 8.0.6.0.0
Oracle Reports Version 6.0
Oracle Applications Release 11
Current product is AD
LADLIB is set to E:/oracle/prodappl/ad/11.5.0/lib/adst.lib
LADSTLIB is set to E:/oracle/prodappl/ad/11.5.0/lib/adst.lib
Current product is ALR
LALRLIB is set to E:/oracle/prodappl/alr/11.5.0/lib/alrst.lib
LALRSTLIB is set to E:/oracle/prodappl/alr/11.5.0/lib/alrst.lib
LALR115WLIB is set to E:/oracle/prodappl/alr/11.5.0/lib/ALR115W.lib
Current product is AP
LAPLIB is set to E:/oracle/prodappl/ap/11.5.0/lib/AP.lib
LAPSTLIB is set to E:/oracle/prodappl/ap/11.5.0/lib/apst.lib
Current product is AR
LARLIB is set to E:/oracle/prodappl/ar/11.5.0/lib/AR.lib
LARSRW is set to E:/oracle/prodappl/ar/11.5.0/lib/xirar.obj $(LARLIB)
LARSTLIB is set to E:/oracle/prodappl/ar/11.5.0/lib/arst.lib
Current product is AS
LASLIB is set to E:/oracle/prodappl/as/11.5.0/lib/asst.lib
LASSTLIB is set to E:/oracle/prodappl/as/11.5.0/lib/asst.lib
LAS115WLIB is set to E:/oracle/prodappl/as/11.5.0/lib/AS115W.lib
Current product is AX
LAXLIB is set to E:/oracle/prodappl/ax/11.5.0/lib/axst.lib
LAXSTLIB is set to E:/oracle/prodappl/ax/11.5.0/lib/axst.lib
Current product is BOM
LBOMLIB is set to E:/oracle/prodappl/bom/11.5.0/lib/BOM.lib
LBOMSTLIB is set to E:/oracle/prodappl/bom/11.5.0/lib/bomst.lib
Current product is CRP
LCRPLIB is set to E:/oracle/prodappl/crp/11.5.0/lib/CRP.lib
LCRPSTLIB is set to E:/oracle/prodappl/crp/11.5.0/lib/crpst.lib
Current product is CUA
LCUALIB is set to E:/oracle/prodappl/cua/11.5.0/lib/cuast.lib
LCUASTLIB is set to E:/oracle/prodappl/cua/11.5.0/lib/cuast.lib
Current product is CZ
LCZLIB is set to E:/oracle/prodappl/cz/11.5.0/lib/czst.lib
LCZSTLIB is set to E:/oracle/prodappl/cz/11.5.0/lib/czst.lib
Current product is DT
LDTLIB is set to E:/oracle/prodappl/dt/11.5.0/lib/dtst.lib
LDTSTLIB is set to E:/oracle/prodappl/dt/11.5.0/lib/dtst.lib
LDT115WLIB is set to E:/oracle/prodappl/dt/11.5.0/lib/DT115W.lib
Current product is ENG
LENGLIB is set to E:/oracle/prodappl/eng/11.5.0/lib/ENG.lib
LENGSTLIB is set to E:/oracle/prodappl/eng/11.5.0/lib/engst.lib
LENG115WLIB is set to E:/oracle/prodappl/eng/11.5.0/lib/ENG115W.lib
Current product is FA
LFALIB is set to E:/oracle/prodappl/fa/11.5.0/lib/fast.lib
LFASRW is set to E:/oracle/prodappl/fa/11.5.0/lib/xirfa.obj $(LFALIB)
LFASTLIB is set to E:/oracle/prodappl/fa/11.5.0/lib/fast.lib
LFA115WLIB is set to E:/oracle/prodappl/fa/11.5.0/lib/FA115W.lib
Current product is FEM
adrelink: Warning: not setting LFEMLIB
since E:/oracle/prodappl/fem/11.5.0/lib/femst.lib does not exist
or cannot be read.
adrelink: Warning: not setting LFEMSTLIB
since E:/oracle/prodappl/fem/11.5.0/lib/femst.lib does not exist
or cannot be read.
Current product is FF
LFFLIB is set to E:/oracle/prodappl/ff/11.5.0/lib/FF.lib
LFFSTLIB is set to E:/oracle/prodappl/ff/11.5.0/lib/ffst.lib
LFF115WLIB is set to E:/oracle/prodappl/ff/11.5.0/lib/FF115W.lib
Current product is FND
LFNDLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FNDCORE.lib
LFNDSRW is set to E:/oracle/prodappl/fnd/11.5.0/lib/xirfnd.obj $(LFNDLIB)
LFNDSTLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/fndst.lib
LFND115WLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FND115W.lib
LFNDCORELIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FNDCORE.lib
LFNDXITLIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/FNDXIT.lib
LAPPR60UELIB is set to E:/oracle/prodappl/fnd/11.5.0/lib/APPR60UE.lib
Current product is GL
LGLLIB is set to E:/oracle/prodappl/gl/11.5.0/lib/GL.lib
LGLSTLIB is set to E:/oracle/prodappl/gl/11.5.0/lib/glst.lib
LGL115WLIB is set to E:/oracle/prodappl/gl/11.5.0/lib/GL115W.lib
Current product is GMA
LGMALIB is set to E:/oracle/prodappl/gma/11.5.0/lib/gmast.lib
LGMASTLIB is set to E:/oracle/prodappl/gma/11.5.0/lib/gmast.lib
LOPM115WLIB is set to E:/oracle/prodappl/gma/11.5.0/lib/OPM115W.lib
Current product is GMD
LGMDLIB is set to E:/oracle/prodappl/gmd/11.5.0/lib/gmdst.lib
LGMDSTLIB is set to E:/oracle/prodappl/gmd/11.5.0/lib/gmdst.lib
Current product is GME
LGMELIB is set to E:/oracle/prodappl/gme/11.5.0/lib/gmest.lib
LGMESTLIB is set to E:/oracle/prodappl/gme/11.5.0/lib/gmest.lib
Current product is GMF
LGMFLIB is set to E:/oracle/prodappl/gmf/11.5.0/lib/gmfst.lib
LGMFSTLIB is set to E:/oracle/prodappl/gmf/11.5.0/lib/gmfst.lib
Current product is GMI
LGMILIB is set to E:/oracle/prodappl/gmi/11.5.0/lib/gmist.lib
LGMISTLIB is set to E:/oracle/prodappl/gmi/11.5.0/lib/gmist.lib
Current product is GML
LGMLLIB is set to E:/oracle/prodappl/gml/11.5.0/lib/gmlst.lib
LGMLSTLIB is set to E:/oracle/prodappl/gml/11.5.0/lib/gmlst.lib
Current product is GMP
LGMPLIB is set to E:/oracle/prodappl/gmp/11.5.0/lib/gmpst.lib
LGMPSTLIB is set to E:/oracle/prodappl/gmp/11.5.0/lib/gmpst.lib
Current product is IBY
LIBYLIB is set to E:/oracle/prodappl/iby/11.5.0/lib/ibyst.lib
LIBYSTLIB is set to E:/oracle/prodappl/iby/11.5.0/lib/ibyst.lib
Current product is INV
LINVLIB is set to E:/oracle/prodappl/inv/11.5.0/lib/INV.lib
LINVSTLIB is set to E:/oracle/prodappl/inv/11.5.0/lib/invst.lib
LINV115WLIB is set to E:/oracle/prodappl/inv/11.5.0/lib/INV115W.lib
Current product is MRP
LMRPLIB is set to E:/oracle/prodappl/mrp/11.5.0/lib/MRP.lib
LMRPSTLIB is set to E:/oracle/prodappl/mrp/11.5.0/lib/mrpst.lib
Current product is MSC
LMSCLIB is set to E:/oracle/prodappl/msc/11.5.0/lib/mscst.lib
LMSCSTLIB is set to E:/oracle/prodappl/msc/11.5.0/lib/mscst.lib
Current product is MSO
LMSOLIB is set to E:/oracle/prodappl/mso/11.5.0/lib/msost.lib
LMSOSTLIB is set to E:/oracle/prodappl/mso/11.5.0/lib/msost.lib
Current product is MSR
LMSRLIB is set to E:/oracle/prodappl/msr/11.5.0/lib/msrst.lib
LMSRSTLIB is set to E:/oracle/prodappl/msr/11.5.0/lib/msrst.lib
Current product is MST
LMSTLIB is set to E:/oracle/prodappl/mst/11.5.0/lib/mstst.lib
LMSTSTLIB is set to E:/oracle/prodappl/mst/11.5.0/lib/mstst.lib
Current product is MWA
LMWALIB is set to E:/oracle/prodappl/mwa/11.5.0/lib/mwast.lib
LMWASTLIB is set to E:/oracle/prodappl/mwa/11.5.0/lib/mwast.lib
Current product is PA
LPALIB is set to E:/oracle/prodappl/pa/11.5.0/lib/past.lib
LPASTLIB is set to E:/oracle/prodappl/pa/11.5.0/lib/past.lib
Current product is PAY
LPAYLIB is set to E:/oracle/prodappl/pay/11.5.0/lib/payst.lib
LPAYSTLIB is set to E:/oracle/prodappl/pay/11.5.0/lib/payst.lib
LPAY115WLIB is set to E:/oracle/prodappl/pay/11.5.0/lib/PAY115W.lib
Current product is PO
LPOLIB is set to E:/oracle/prodappl/po/11.5.0/lib/PO.lib
LPOSRW is set to E:/oracle/prodappl/po/11.5.0/lib/xirpo.obj $(LPOLIB)
LPOSTLIB is set to E:/oracle/prodappl/po/11.5.0/lib/post.lib
LPO115WLIB is set to E:/oracle/prodappl/po/11.5.0/lib/PO115W.lib
Current product is PON
adrelink: Warning: not setting LPONLIB
since E:/oracle/prodappl/pon/11.5.0/lib/ponst.lib does not exist
or cannot be read.
adrelink: Warning: not setting LPONSTLIB
since E:/oracle/prodappl/pon/11.5.0/lib/ponst.lib does not exist
or cannot be read.
Current product is RG
LRGLIB is set to E:/oracle/prodappl/rg/11.5.0/lib/rgst.lib
LRGSTLIB is set to E:/oracle/prodappl/rg/11.5.0/lib/rgst.lib
Current product is WIP
LWIPLIB is set to E:/oracle/prodappl/wip/11.5.0/lib/WIP.lib
LWIPSTLIB is set to E:/oracle/prodappl/wip/11.5.0/lib/wipst.lib
LWIP115WLIB is set to E:/oracle/prodappl/wip/11.5.0/lib/WIP115W.lib
Current product is WPS
LWPSLIB is set to E:/oracle/prodappl/wps/11.5.0/lib/wpsst.lib
LWPSSTLIB is set to E:/oracle/prodappl/wps/11.5.0/lib/wpsst.lib
Current product is WSM
LWSMLIB is set to E:/oracle/prodappl/wsm/11.5.0/lib/wsmst.lib
LWSMSTLIB is set to E:/oracle/prodappl/wsm/11.5.0/lib/wsmst.lib
Current product is XDP
LXDPLIB is set to E:/oracle/prodappl/xdp/11.5.0/lib/xdpst.lib
LXDPSTLIB is set to E:/oracle/prodappl/xdp/11.5.0/lib/xdpst.lib
LUSRLIB is
Not linking Oracle Applications with any Oracle mail product
LALRSTUB is now set to E:/oracle/prodappl/alr/11.5.0/lib/alstub.obj
MAILLNK is now set to E:/oracle/prodappl/alr/11.5.0/lib/alstub.obj
Creating prefix makefiles ...
Done creating prefix makefiles
The file E:/oracle/prodappl/admin/PROD/out/alkfnd000.txt contains:
E:\oracle\prodappl\fnd\11.5.0\bin\ADCONV.exe fnd bin ADCONV.exe
E:\oracle\prodappl\fnd\11.5.0\bin\AFTBLGEN.exe fnd bin AFTBLGEN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\APPR60UE.dll fnd bin APPR60UE.dll
E:\oracle\prodappl\fnd\11.5.0\bin\ar60rund.exe fnd bin ar60rund.exe
E:\oracle\prodappl\fnd\11.5.0\bin\CCMSETUP.exe fnd bin CCMSETUP.exe
E:\oracle\prodappl\fnd\11.5.0\bin\CCMSVC.exe fnd bin CCMSVC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\CMDCART.dll fnd bin CMDCART.dll
E:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe fnd bin CONCSUB.exe
E:\oracle\prodappl\fnd\11.5.0\bin\fdfcmp.exe fnd bin fdfcmp.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FDULONG.exe fnd bin FDULONG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\flint60.exe fnd bin flint60.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FND115W.dll fnd bin FND115W.dll
E:\oracle\prodappl\fnd\11.5.0\bin\FNDAQCT.exe fnd bin FNDAQCT.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDATUPD.exe fnd bin FNDATUPD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCORE.dll fnd bin FNDCORE.dll
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPASS.exe fnd bin FNDCPASS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\fndcpesr.exe fnd bin fndcpesr.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPGLC.exe fnd bin FNDCPGLC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPPUR.exe fnd bin FNDCPPUR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPRRF.exe fnd bin FNDCPRRF.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPSPN.exe fnd bin FNDCPSPN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPTST.exe fnd bin FNDCPTST.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCPUCF.exe fnd bin FNDCPUCF.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDCRM.exe fnd bin FNDCRM.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDDWPUR.exe fnd bin FNDDWPUR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDEMON.exe fnd bin FNDEMON.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFBPLS.exe fnd bin FNDFBPLS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFBUPG.exe fnd bin FNDFBUPG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFCHY.exe fnd bin FNDFFCHY.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFRXR.exe fnd bin FNDFFRXR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFUPG.exe fnd bin FNDFFUPG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFFVGN.exe fnd bin FNDFFVGN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDFS.exe fnd bin FNDFS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDGFH.exe fnd bin FNDGFH.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDGFU.exe fnd bin FNDGFU.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDIMON.exe fnd bin FNDIMON.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDLIBR.exe fnd bin FNDLIBR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDLOAD.exe fnd bin FNDLOAD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDLOADSO.exe fnd bin FNDLOADSO.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDMDCVT.exe fnd bin FNDMDCVT.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDMDGEN.exe fnd bin FNDMDGEN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDPRESC.exe fnd bin FNDPRESC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDPSTAX.exe fnd bin FNDPSTAX.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDRCLC.exe fnd bin FNDRCLC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDRCLS.exe fnd bin FNDRCLS.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDRTR45.exe fnd bin FNDRTR45.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSCH.exe fnd bin FNDSCH.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSLOAD.exe fnd bin FNDSLOAD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSM.exe fnd bin FNDSM.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDSVCRG.exe fnd bin FNDSVCRG.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDTMTST.exe fnd bin FNDTMTST.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDWRR.exe fnd bin FNDWRR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\FNDXIT.dll fnd bin FNDXIT.dll
E:\oracle\prodappl\fnd\11.5.0\bin\OAMKSVC.exe fnd bin OAMKSVC.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFLOAD.exe fnd bin WFLOAD.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFMAIL.exe fnd bin WFMAIL.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFMLRGSM.exe fnd bin WFMLRGSM.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFMLRXFR.exe fnd bin WFMLRXFR.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFRESGEN.exe fnd bin WFRESGEN.exe
E:\oracle\prodappl\fnd\11.5.0\bin\WFTEST.exe fnd bin WFTEST.exe
Creating import libraries for FND
Creating import library APPR60UE.lib on Tue May 29 16:57:01 IST 2012
[1] + Done(134) ?
4008 Abort gnumake
Creating import library APPR60UE.lib failed on Tue May 29 16:57:01 IST 2012
See error messages above
Creating import library CMDCART.lib on Tue May 29 16:57:02 IST 2012
[1] + Done(134) ?
3968 Abort gnumake
Creating import library CMDCART.lib failed on Tue May 29 16:57:02 IST 2012
See error messages above
Creating import library FND115W.lib on Tue May 29 16:57:03 IST 2012
[1] + Done(134) ?
5076 Abort gnumake
Creating import library FND115W.lib failed on Tue May 29 16:57:03 IST 2012
See error messages above
Creating import library FNDCORE.lib on Tue May 29 16:57:04 IST 2012
[1] + Done(134) ?
2904 Abort gnumake
Creating import library FNDCORE.lib failed on Tue May 29 16:57:04 IST 2012
See error messages above
Creating import library FNDXIT.lib on Tue May 29 16:57:05 IST 2012
[1] + Done(134) ?
5440 Abort gnumake
Creating import library FNDXIT.lib failed on Tue May 29 16:57:05 IST 2012
See error messages above
Starting link of product 'fnd' on Tue May 29 16:57:06 IST 2012
Current product is fnd
Current product TOP is $FNDTOP
Current prodarea is E:/oracle/prodappl/fnd/11.5.0
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Tue May 29 16:57:14 IST 2012
[1] + Done(134) ?
2700 Abort gnumake
Done with link of fnd executable 'ADCONV.exe' on Tue May 29 16:57:14 IST 2012
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Tue May 29 16:57:15 IST 2012
[1] + Done(134) ?
4612 Abort gnumake
Done with link of fnd executable 'AFTBLGEN.exe' on Tue May 29 16:57:15 IST 2012
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk appr60ue.LIST
Extracting objects from the library
ar -xv -F coff E:/oracle/prodappl/fnd/11.5.0/lib/fndst.lib
x - fdfffu.obj
x - fdffile.obj
x - fdffld.obj
x - fdffvs.obj
x - fdfgcx.obj
x - fdfgli.obj
x - fdfkba.obj
x - fdfkbe.obj
x - fdfkbp.obj
x - fdfkbr.obj
x - fdfkbt.obj
x - fdfkds.obj
x - fdfkfu.obj
x - fdfkfu2.obj
x - fdfksr.obj
x - fdfkva.obj
x - fdflist.obj
x - fdflop.obj
x - fdfobj.obj
x - fdfrfu.obj
x - fdfsdf.obj
x - fdfsrw.obj
x - fdfstr.obj
x - fdftdu.obj
x - fdfupu.obj
x - afdcpm.obj
x - afdfrm.obj
x - afdgfn.obj
x - afdict.obj
x - afdsil.obj
x - afdsrw.obj
x - afdtmp.obj
x - afdwin.obj
x - afpatn.obj
x - afpcmn.obj
x - afpcra.obj
x - afpcsq.obj
x - afpdon.obj
x - afpeim.obj
x - afpejp.obj
x - afperq.obj
x - afpgmg.obj
x - afpi.obj
x - afpiml.obj
x - afplog.obj
x - afpo.obj
x - afppcp.obj
x - afppqs.obj
x - afpprc.obj
x - afpprn.obj
x - fdssgn.obj
x - fdssoa.obj
x - fdugci.obj
x - fdusql.obj
x - fdxidk.obj
x - fdxml.obj
x - fdxsqk.obj
x - fdxver.obj
x - fpep.obj
x - usdsim.obj
x - wfcore.obj
x - wfdes.obj
x - wfldr.obj
x - wfldrf.obj
x - wfmlr.obj
x - wfmsiic.obj
x - wfmutil.obj
x - wfntf.obj
x - wfomgul.obj
x - wfrsp.obj
x - afpfs.obj
x - afpfsv.obj
x - afpgrq.obj
x - afpperl.obj
x - afppir.obj
x - afpprr.obj
x - afprul.obj
x - afpsm.obj
x - afpsmf.obj
x - afptmttp.obj
x - afpucf.obj
x - affile.obj
x - fdllov.obj
x - fdpevt.obj
x - fdpvwr.obj
x - fdsecp.obj
x - wfext.obj
x - wffile.obj
x - wfidx.obj
x - afmem.obj
x - afpcmt.obj
x - afpgri.obj
x - afpoval.obj
x - ccmrkey.obj
x - fdugwi.obj
x - fdxwho.obj
x - afslov.obj
x - ccmmndlg.obj
x - afixlh.obj
x - afixpic.obj
x - afixpmuu.obj
x - fdpemon.obj
x - afpgsr.obj
x - fdipth.obj
x - fdpibm.obj
x - fdpldr.obj
x - fdpstp.obj
x - fdpurq.obj
x - ccmppsht.obj
x - ccmsetup.obj
x - afdacc.obj
x - afpbwv.obj
x - afpcc.obj
x - afpflx.obj
x - afpcbidi.obj
x - stdafx.obj
x - afwsys.obj
x - afwpal.obj
x - afwind.obj
x - afwgeo.obj
x - afwevt.obj
x - afwdev.obj
x - afvpa.obj
x - afvca.obj
x - afvbt.obj
x - fduxit.obj
x - fduuid.obj
x - fdutkn.obj
x - fduopr.obj
x - fduli.obj
x - fdugii.obj
x - fducsq.obj
x - fdndbc.obj
x - fdfile.obj
x - fdarux.obj
x - afuddl.obj
x - xitdwp.obj
x - xitdus.obj
x - xitdsp.obj
x - xitdsa.obj
x - xitdrg.obj
x - xitdra.obj
x - xitdpy.obj
x - xitdpr.obj
x - xitdpo.obj
x - xitdpa.obj
x - xitdoe.obj
x - xitdmp.obj
x - xitdmf.obj
x - xitdin.obj
x - xitdgmz.obj
x - xitdgms.obj
x - xitdgmr.obj
x - xitdgmp.obj
x - xitdgmo.obj
x - xitdgml.obj
x - xitdgmi.obj
x - xitdgme.obj
x - xitdgmd.obj
x - xitdgma.obj
x - xitdgl.obj
x - xitdff.obj
x - xitdfa.obj
x - xitden.obj
x - xitddt.obj
x - xitdcs.obj
x - xitdcp.obj
x - xitdbm.obj
x - xitdax.obj
x - xitdas.obj
x - xitdar.obj
x - xitdap.obj
x - xitdal.obj
x - alroms.obj
x - xirnop.obj
x - fdxsqr.obj
x - fdxnls.obj
x - fdxidr.obj
x - fdxext.obj
x - fdxdcf.obj
x - fdxcls.obj
x - fdsxit.obj
x - fdsgtk.obj
x - fdsarg.obj
x - afpvpc.obj
x - afptmc.obj
x - fdxwrk.obj
x - fdxutl.obj
x - fdxuar.obj
x - fdxtrc.obj
x - fdxtmr.obj
x - fdxsql.obj
x - fdxsqf.obj
x - fdxqus.obj
x - fdxpst.obj
x - fdxprf.obj
x - fdxpii.obj
x - fdxmc.obj
x - fdxlcs.obj
x - fdxkmd.obj
x - fdxgvl.obj
x - fdxfil.obj
x - fdxdsp.obj
x - fdxdat.obj
x - fdxapp.obj
x - fdwask.obj
x - fdptmx.obj
x - fdpscm.obj
x - fdpgcf.obj
x - fdefil.obj
x - afwkflw.obj
x - afwaol.obj
x - aforg.obj
x - afoleaut.obj
x - afmsg.obj
x - afifld.obj
x - afglpw.obj
x - afgldbs.obj
x - afgbox.obj
x - fdssvl.obj
x - fdssuq.obj
x - fdsssk.obj
x - fdssck.obj
x - fdsctl.obj
x - fdsaud.obj
x - fdstkt.obj
x - fdrutl.obj
x - fdrfcmp.obj
x - fdrcmp.obj
x - afpoux.obj
x - usdins.obj
x - fpeb.obj
x - fpe.obj
x - fdutim.obj
x - fduprn.obj
x - fducst.obj
x - fdrpbf.obj
x - fdpsra.obj
x - fdpsqp.obj
x - fdpsps.obj
x - fdpsbm.obj
x - fdpsar.obj
x - fdprst.obj
x - fdprpt.obj
x - fdprlk.obj
x - fdprhl.obj
x - fdpreq.obj
x - fdprcp.obj
x - fdppev.obj
x - fdppbr.obj
x - fdpmst.obj
x - fdplnk.obj
x - fdpimp.obj
x - fdphbe.obj
x - fdpfqr.obj
x - fdperi.obj
x - fdpdf.obj
x - fdpdbg.obj
x - fdpdbf.obj
x - fdpcrc.obj
x - fdpccr.obj
x - fdpbq.obj
x - fdpblf.obj
x - fdowln.obj
x - fdomsg.obj
x - afuepp.obj
x - afpufe.obj
x - afptstp.obj
x - afptmi.obj
x - afprun.obj
x - afpops.obj
x - afpgrs.obj
x - afpgpr.obj
x - afpgip.obj
x - afpdpo.obj
x - afpdbg.obj
x - afpcrs.obj
x - afpcat.obj
x - afe.obj
x - usdxit.obj
x - usdwin.obj
x - usdtec.obj
x - usdstub.obj
x - usdpar.obj
x - usdos2.obj
x - usdoaut.obj
x - usdmpe.obj
x - usdmac.obj
x - usdhtml.obj
x - usdgpa.obj
x - usdfmv.obj
x - usdccf.obj
x - spnvms.obj
x - spnos2.obj
x - spnmpe.obj
x - spnmac.obj
x - spndos.obj
x - gmalloc.obj
x - aftimr.obj
x - afhtmhlp.obj
x - fdumod.obj
x - fduhex.obj
x - fdueds.obj
x - fdnwsc.obj
x - afutim.obj
x - afust.obj
x - afusc.obj
x - afulzw.obj
x - afugli.obj
x - aftime.obj
x - afmath.obj
x - afctx.obj
x - afcore.obj
x - aflutl.obj
x - afdrsc.obj
x - afdrrt.obj
x - afdrdb.obj
x - afdf.obj
x - fdndcf.obj
x - afdcx.obj
x - fdahmi.obj
x - fdacon.obj
x - afufld.obj
x - afsfld.obj
x - afprcl.obj
x - afpolg.obj
x - afpmir.obj
x - fdxefv.obj
x - fdssop.obj
x - afpscg.obj
x - usdnt.obj
x - fdugpi.obj
x - fdudat.obj
x - fdsnxt.obj
x - fdsgbl.obj
x - fdhhlp.obj
x - flutil.obj
x - flup.obj
x - fllog.obj
x - flglob.obj
x - fldisp.obj
x - fldb.obj
x - flada.obj
x - afppio.obj
x - afpdlk.obj
x - afgfhdoc.obj
x - affntrep.obj
x - afcharrp.obj
x - wfresg.obj
x - cregkey.obj
x - ccmsvc.obj
x - afttflib.obj
x - afttf2t3.obj
x - afpspt.obj
x - afpfsc.obj
x - afixust.obj
x - afixube.obj
x - afixft.obj
x - afixfs.obj
x - affntgen.obj
x - ccmsssvc.obj
x - afuprt.obj
x - afstr.obj
x - afpsmg.obj
x - wfres.obj
x - wfomgucn.obj
x - wfms.obj
x - afpesa.obj
x - afpeot.obj
x - afpdwpur.obj
x - afpcal.obj
x - aflog.obj
x - afixupgn.obj
x - afixucf.obj
x - afixpm.obj
x - afixfsb.obj
x - affntlst.obj
x - afenv.obj
x - afcs2uni.obj
x - fddxit.obj
x - fdcpspn.obj
x - fdaupd.obj
x - fdatat.obj
x - fdastr.obj
x - fdacv.obj
x - ccmupi.obj
x - ccmsup.obj
x - ccmoptpg.obj
x - afugai.obj
x - afsxss.obj
x - afshape.obj
x - afscp.obj
x - fdpwrt.obj
x - fdpperl.obj
x - fdpmbr.obj
x - fdparg.obj
x - fdnlng.obj
x - fdmenu.obj
x - fdidrv.obj
x - fdspwd.obj
x - fdffds.obj
x - fdffbu.obj
x - fdfdvu.obj
x - fdfdtj.obj
x - fdfdfu.obj
x - fdfdds.obj
x - fdfdbg.obj
x - fdfcom.obj
x - fdfchy.obj
x - fdfbtr.obj
x - fdfbpl.obj
x - fdfapi.obj
x - ccmsvcpg.obj
x - afwlib.obj
x - afupi.obj
x - afubtree.obj
x - afsys.obj
x - afspc.obj
x - afptm.obj
x - afpsrs.obj
x - afpsmc.obj
x - afpsgc.obj
x - afpsec.obj
x - afppur.obj
x - afpprq.obj
x - usdspid.obj
x - spnunx.obj
x - spnnt.obj
x - fdsrsp.obj
x - fdptls.obj
x - fdpsql.obj
x - fdprrc.obj
x - fdprmo.obj
x - fdprep.obj
x - fdpprn.obj
x - fdplbr.obj
x - fdpgrq.obj
x - fdisqf.obj
x - fdfwtk.obj
x - fdfwrt.obj
x - fdfwmsg.obj
x - fdfwin.obj
x - fdfwfld.obj
x - fdfweb.obj
x - fdfvsu.obj
x - fdfvgn.obj
x - fdfval.obj
x - fdfutl.obj
Creating temporary function list, if required.
echo
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/APPR60UE.dll
Starting link of fnd executable 'APPR60UE.dll' on Tue May 29 16:57:16 IST 2012
[1] + Done(134) ?
4804 Abort gnumake
Done with link of fnd executable 'APPR60UE.dll' on Tue May 29 16:57:16 IST 2012
Relink of module "APPR60UE.dll" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CCMSETUP.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/CCMSETUP.exe
Starting link of fnd executable 'CCMSETUP.exe' on Tue May 29 16:57:17 IST 2012
[1] + Done(134) ?
4792 Abort gnumake
Done with link of fnd executable 'CCMSETUP.exe' on Tue May 29 16:57:17 IST 2012
Relink of module "CCMSETUP.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CCMSVC.exe' in product fnd ...
gnumake -f E:/oracle/prodappl/admin/PROD/out/link_fnd_6076.mk E:/oracle/prodappl/fnd/11.5.0/bin/CCMSVC.exe
Starting link of fnd executable 'CCMSVC.exe' on Tue May 29 16:57:17 IST 2012
[1] + Done(134) ?
3556 Abort gnumake
Done with link of fnd executable 'CCMSVC.exe' on Tue May 29 16:57:17 IST 2012
Relink of module "CCMSVC.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/prodappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'CMDCART.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
rm: cannot remove directory "temp": The process cannot access the file because it is being used by another process.
E:/oracle/prodappl/fnd/11.5.0/lib/temp directory exists and
cannot be cleaned up. Please remove this directory
and restart the process.
adrelink is exiting with status 1
End of adrelink session
Date/time is Tue May 29 16:57:18 IST 2012
**********************************************************
Maybe you are looking for
-
I have connected via VPN but can't see lion server .private
when I am in my local network at home I simply go to finder and click on my server and connect to it. When I VPN form the net into my servers local network I dont see it in my finder? I know I am in the next work being I did a IP Check but am I am mi
-
How do you get your iphone not to restart
i kinda messed up. i wanted to downlod the new update the ios 7.0.2 and it went to conect to itune mode and i dont want to restart because i have very important stuff from work that i did not write down.. i need help.
-
JFileChooser weird problem (Help!!!)
Does anyone here have loading problem with JFileChooser? I have a class that inherited the JFileChooser class and another class that inherited the JFrame class and this class create an instance of the JFileChooser class. My program sometime will not
-
I recently imported over 11,500 photos from my old computer to my new computer using Photoshop Elements 7. 98% of these images had descriptive tags or categories assigned. Unfortunatly, only about 400 of the tags remained in place after the import. I
-
Firefox 5 crashes multiple times a day
https://crash-stats.mozilla.com/report/index/bp-5c12700c-06fc-4597-89e1-000162110707 I tried hitting the search mozilla support for help and it came back with 0 results. I never had this problem with FF4 or earlier. The problem first showed up for me