Editing a Recorded Meeting

So I have a meeting recorded and I would like to edit out a section that is irrelevant. I tried to use the integrated editing tool but when I cut out the section I don't want it doesn't actual cut it. Instead, when the video gets to that point it stops, loads up again, plays through the cut section very fast, and then continues on. I took a look at the offline version of the edited file and the problem persists. Does anyone know why this might be happening/how to get around it? I would like to make smooth cuts but I don't know if that's possible with a .flv.
Thanks...

I'm struggling with the same issue, and I think you have to make it offline then edit from Premiere or Premiere Elements (or Final Cut Express).

Similar Messages

Editing webinar recording - experiencing problems...

Hello,
I was wondering if anyone can help me with an issue I am experiencing when I edit a webinar recording...
My team just hosted a webinar this morning. I started the webinar recording early (about 6 min) and have just gone in to edit the initial dead time out. However, when I cut and then resave the recording, it opens back up (as it normally would) but the recording will no longer advance. When I try to play it manually, it only allows one-two words, then stops again.
This is especially odd as the recording let me edit the back end without any problems (recording opens and still advances). It just seems to be a problem when I cut the initial 6 minutes. I've tried editing the recording in both IE and Chrome... same results on both. I've also edited a few other various recordings today without a problem.
Any thoughts on why this is happening?
Thank you!

Hi kjclark82,
Could you check and confirm from the connect webapp that the recording you have edidted is showin correct duration.
Also you can give it a try by "Reverting to original" and edit the recording again.
Once you go to meeting/seminar --> recordings then edit recording recording there is "Revert to original " option which brings back the original recording socould you please try to edit it again as it is working fine for me and for you too with other recoridngs so just to check if something went wrong when you initially edted it.
hope this helps!
thanks
Nikhil

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

Can I find the number of times the recorded meeting has been viewed?

In Adobe Connect is it possible to find the number of views after a recorded meeting is made public? Under meeting dashboard it keeps track of these views for 30 days but I can not seem to find anywhere under the reports where this information is located.

If you move the recordings to the Content Library, then you can pull the standard content reports for it, which will tell you number of views.

Editing a recording

I have several questions regarding the offline (downloaded)
recordings.
1. Any suggestions on how to edit a recording that has been
downloaded?
Seems like an additional program (like Adobe Media Player) is
needed just to play the recording when is has been downloaded
offline.
2. With that in mind, does that mean if I put the recording
on a CD or non-Flash -based server that the end user will need to
either download a player or have it on the cd to be installed?
3. Seems like most NLI editors won't recognize the offline
(Including Adobe Premiere Pro) .flv file or isn't it a true .flv
file?
4. Wasn't Presenter 7 suppose to be able convert files and
why does it do such a poor job of allowing offline .flv file to be
inserted into a PowerPoint?
Thank you in advance

Yes the options offered by Connect are very basic. For
playback or importing into Premiere I've used these sites to
convert the FLV to WMV
http://www.zamzar.com/
http://online.movavi.com/
Good luck!

Not able to edit the records in the table

Hi Experts,
I am not able to edit the records or delete the records from a database table.
Those fields are not enabled.
Edit icon is not at all there.
Wat can i do.
Cheers,
Karthick

Hi,
In SM30, u can edit or delete records from a table.Before goin to this u need to create table maintainance generator for this table.
regards
lakshmi

How to edit the records value fetched by select statement query in sqldever

How to edit the records value fetched by select statement query in sqldever 2.1.1.
EX-
SELECT * FROM emp WHERE ename like 'Jaga%'
Edited by: user9372056 on Aug 31, 2010 2:16 AM

Hi,
Although some forum members may be using that tool, there is still a dedicated forum for SQL Developer.
SQL Developer
Maybe your chances are better there.
Regards
Peter

Database DLL error on editing the record selection formula?

Post Author: Aravind
CA Forum: Older Products
Hi All,I recently edited the record selection formula of an old report and since then the report is issuing me an "Error detected by database DLL" error.The report was running fine earlier and still continues to run fine if I undo the changes. Earlier, the records were selected based on a 'date' field and I edited the formula to select records based on another date field, but the report doesn't work.The report runs fine on my local PC using Crystal Reports, but web based reporting fails with the error message. The data is selected from a view and the date parameters I talked about are the fields in the same view.This view has around five date parameters and the report runs fine for all of them, except one date field.Any pointers are appreciated.Crystal reports version is 8.5. Regards,Aravind.

Post Author: DPowell
CA Forum: Older Products
Ah, yes, the good old generic date error.
The problem is likely an invalid date value in one (or all) of your records with that field. You don't say what database engine you are connected to or which driver you are using for the report, but I'll give you some "pointers".
Basically, the SQL fetch has encountered an error in your date field and the driver you are using in the report can't handle it.
A null date could cause that problem. Also a date-time field with an invalid value or truncated time value. A robust ODBC driver, like one of the Microsoft drivers might be able to overcome it. Likewise, vendors frequently release updated drivers to improve error handling just like this.
1. Analyze your data, specifically the contents of the "new" date field you are using for some kind of invalid date.
2. Experiment with different ODBC drivers by creating alternate ODBC connections to the same database using different ODBC drivers.
3. Browse and experiment with options in Crystal Reports Properties that allow you to specify data conversions for NULLs and Dates.
Good luck !

Using a recorded meeting as content for another meeting - how?

I'm trying to set up a webinar where we play a recorded meeting. We don't want people to access the meeting whenever they want, we want everyone to view it at the same time. The manual/help documents say:
"Also, a recorded meeting can be used as content for another meeting."
But I can't any information on how to DO this.
Can anyone help?
Dayna

That is truly a poorly placed sentance with no explanation. To achieve this, you will need to make an offline version of the recording, so you have an FLV version that can be played in the meeting room. Here are the steps: http://help.adobe.com/en_US/connect/8.0/using/WS20F14479-39A1-42e2-AF0A-F8C2F1AA9BE4.html
If you want people who do not have access to an Adobe Connect server to view a meeting recording, create an offline version. The offline recording is saved as an FLV file, which can be viewed in an FLV player, and distributed via e-mail, CD, or a server.
Note: Creating an offline recording takes approximately the same amount of time as the duration of the original meeting recording.
You can minimize the offline recording window or view other windows on top of it without interfering with the contents of your recording.
From the Adobe Connect Central home page, click Meetings or Training, and then click the meeting or classroom that includes the recording.
Click Recordings.
Next to the specific recording you want to use, click Make Offline.
If Help text appears, click Proceed with Offline Recording. Then specify a location for the finished FLV file. The meeting begins playing, creating the offline file.
As needed, click the Pause/Resume, Stop And Save, and Start New controls:
The Pause/Resume button temporarily stops creation of the offline recording. This can be useful if you must download a large file and do not want to strain system resources. When you click Resume, the recording continues from where it was paused. The finished recording is one continuous file regardless of how many times you paused and resumed recording.
The Stop and Save button ends the creation of a recording, which is useful if you want to record portions of a meeting as separate files. Click Start New to resume recording where you left off.
When the recording process finishes, close the offline recorder window. (If the window is minimized, it closes automatically.)
Have the recording open on a moinitor with high resolution and full screen (before minimizing to the sytem tray), so as to get the best quality recording.

Is it poss to capture a recorded meeting?

We have Connect v6, and for promo purposes we'd like to put a
short clip from a recorded meeting into a PowerPoint presentation
which will be running autonomously.
I can't see a way to download the recorded meeting (which I
presume is a Flash video file?), and I 've tried using the services
of keepvid.com, but pasting the meeting url into keepvid doesn't
open the meeting, so no luck there.
My tech knowledge of these things isn't great, but I'm
willing to learn. Does anyone have any ideas how we can capture the
recorded meeting? Or is it just not possible in version 6?
Thanks.

You may try using Captivate, and doing a full motion
recording.
With the 30 day trial you can test and see if that works for
free. As a word of advice, use the Full Motion Recording option and
don't record a screen capture larger than 1024 X 768.
Jorma@RealEyes

Editing a Recording in Connect Pro

Is there a way to make the crop option on editing a recording more accurate than 5 seconds?

Premiere Elements will do the Import, editing and then Burn to DVD (creating VOB's, plus the other necessary files and structure). It has some of the same editing capabilities as PrPro, plus a very limited authoring function.
Now for the caveat - you knew that one was coming, right? With a VOB, you have an MPEG-2 AV file, inside the VOB container. It has already been pretty heavily compressed. When you edit that material, and then Transcode it for another DVD-Video, you WILL be re-compressing that footage, and will loose quality. Some NLE programs do offer "smart rendering," but even then, if you do more than just cut the footage, like add Titles, Transitions, color correction, etc., even they will have to Transcode again, at least for the Clips, where you made changes. I think that Vegas Studio Pro offers smart rendering, as might some others. This you will have to research a bit, and read their statements carefully, to make sure what they are capable of and where there are limitations.
Note: a VOB is a delivery format/container. The MPEG-2 portion is not meant to be edited - just played on a set-top player, or a computer with a DVD software player. Cameras that produce miniDVD's are meant have those played only. They were never intended to be edited.
Good luck,
Hunt

Edit Pre-recorded vocals

I have been trying to work out how to edit pre-recorded vocals using the Voicelive 2 and Logic Pro. I have managed to figure out the settings on the voice live 2 but I cannot work out what to do on the logic side of things. This is what I have been told (see below), but I dont understand what this means.
In LOGIC you have to set up a SEND (to VoiceLive 2 via MAUDIO SPDIF out LEFT!!! CHANNEL ONLY) for sending the dry Vocal track and RETURN the processed signal on a new stereo track (from VoiceLive Rack / input source = MAUDIO SPDIF input L & R channels). Don't forget to record enable the track. To control harmony / detecting automatically the key, you may SEND any audio signal (i.e. your instrumental, piano/ rhodes chord track etc.) via MAUDIO SPDIF RIGHT!!! CHANNEL to VL 2.
Would anyone be kind enough to explain what this means and what I need to do? ( i am trying to post edit pre-recorded vocals using voice live 2, logic 9 and m-audio fast track ultra).
Thank you

Open GB, drag the AIFF file from the Finder onto the GB window
Hey presto!
Vince

Can you edit CRM records with {Tag_edit}

Hi,
I 'm wondering if I can edit my records with {tag_edit)
I can edit the web apps , but when I include the {module_firstname} and edit it. It wont edit the record in CRM.
So I wonder if there is way to do it?
I don't think it will be through web app.
What I'm aiming for is that web user can edit their own information throught a secure zone.
For example. I have created website , with back end. Custom back end. Once the user is registered. He can alter the details.
With out loggin in to admin panel and edit the record in CRM.
Any suggestions would be appreciated.
Thanks
Kind Regards
Jiri

Hi Matt,
Thank you, that what I needed.
Next question.
Could you point me in a right direction. How would I be able to make progress bar? with 5 stages and when I hover over it would tell me some informations.
I have thought of web app. But i'm not too sure now.
Any help will be appreciated.
Thanks
Kind Regards

APP-PO-14094:No records meet your search criteria

Hi,
Merry Christmas Oracle forum members :-)
I would like to have your advice on an error in oracle applications 11i. When trying to receive two approved specific purchase orders we get the error:
APP-PO-14094:No records meet your search criteria
Cause: There are no records that match your search criteria
Action: Re-enter your search criteria with fewer or different parameters
I checked the database tables: po_headers_all, po_lines_all,po_line_locations_all,and po_distributions_all and I can find nothing unusual.What am I missing?
regards,

AHS wrote:
Hi,
Merry Christmas Oracle forum members :-)
I would like to have your advice on an error in oracle applications 11i. When trying to receive two approved specific purchase orders we get the error:
APP-PO-14094:No records meet your search criteria
Cause: There are no records that match your search criteria
Action: Re-enter your search criteria with fewer or different parameters
I checked the database tables: po_headers_all, po_lines_all,po_line_locations_all,and po_distributions_all and I can find nothing unusual.What am I missing?
regards,Please see these docs.
How To Reset a Purchase Order or Requisition From In Process or Pre-Approved To Incomplete/Requires Reapproval For Isolated Cases [ID 390023.1]
Receiving.RECEIPTS Common Error Message WMSINB-22192 , APP-FND-00204 and APP-PO-14094 [ID 1251114.1]
FAQ - Receiving.RECEIPTS [ID 1249431.1]
How To Troubleshoot APP-PO-14094 When Performing Receiving Related Transactions [ID 444771.1]
Common Receiving Issues after Installing or Upgrading to 11.5.10 [ID 309896.1]
PO Status Affects Receiving Transactions (Receive, Deliver, Correct, Return, ASN) [ID 551232.1]
Cannot Perform Return or Correction on a Purchase Order Line - Receive APP-PO-14094 Error [ID 188355.1]
RCVTXERE / RCVTXECO: APP-PO-14094: No Records Meet Your Search Criteria [ID 1101403.1]
What Receipts Can Be Queried By Requisition Number In Find Expected Receipts form? [ID 234814.1]
RCVRCERC APP-PO-14094 FRM-40212: Invalid value for field REQ_NUM When Receipting an Internal Requisition Between Different Operating Units [ID 1489495.1]
Thanks,
Hussein

Editing a record and adding cffile, please help

Hello;
I am writting an editor page for a web site. I am trying to
add cffile to the edit function. This page acts as 2 ways of
editing the DB records, it can add a new one, and it can edit an
exisitng one.
What I am trying to do is this:
1. When you add a record, you can upload an image and add all
the content in the other feilds, click the ok button and it will
upload the file, and add the file name to the DB table.
2. when you want to edit the record, the file upload feild is
blank and under it is the name of the file being used, so you can
upload a new file and change the one that record is using.
Here is my code so far, I don't have it set to do number 2.
yet, I am not sure how to do it and same goes for uploading the
file in the action script and making it add it to the DB record.
edit page code:
<cfset FormFieldList = "title,image,discription,body">
<cfif ParameterExists(URL.RecordID)>
<cfquery name="featRec" dataSource="creative"
maxRows=1>
SELECT feature.title, feature.image, feature.discription,
feature.body, feature.ID AS ID_Field
FROM feature
<cfif ParameterExists(URL.RecordID)>
WHERE feature.ID = #URL.RecordID#
</cfif>
</cfquery>
<cfif not ListFind( FormFieldList, "ID" )>
<cfset FormFieldList = ListAppend( FormFieldList, "ID"
)>
</cfif>
<cfset title_Value = '#featRec.title#'>
<cfset image_Value = '#featRec.image#'>
<cfset discription_Value = '#featRec.discription#'>
<cfset body_Value = '#featRec.body#'>
<cfelse>
<cfset title_Value = ''>
<cfset image_Value = ''>
<cfset discription_Value = ''>
<cfset body_Value = ''>
</cfif>
<head>
</head>
<body>
<cfoutput query="featRec">
<form action="Action.cfm" method="post" name="content"
id="content" onsubmit="saveIt()">
<input type="hidden" name="FieldList"
value="#FormFieldList#">
<cfif ParameterExists(URL.RecordID)>
<input type="hidden" name="RecordID"
value="#URL.RecordID#">
<input type="hidden" name="ID" value="#URL.RecordID#">
</cfif>
<input type="text" name="title" class="textInputs"
value="#title_Value#" maxLength="510">

<input type="file" name="MYFile">
<cfif MYFile IS defined>
#file#
</cfif>

<input type="text" name="image" class="textInputs"
value="#image_Value#" maxLength="510">
<input type="text" name="discription" class="textInputs"
value="#discription_Value#" maxLength="510">
<textarea cols="" rows="" name="PDSeditor" style="display:
none">#Body_Value#</textarea>
</cfoutput>
<input type="submit" class="formButtons" name="feat_OK"
value=" OK ">
<input type="submit" class="formButtons"
name="feat_Cancel" value="Cancel">
</form>
Action Script:
<cffile Action="upload" filefield="uploadfile"
destination="
http://www.myurl.com/img/feature"
nameconflict="MAKEUNIQUE">
<cfif ParameterExists(Form.RecordID)>
<cfupdate dataSource="#sitedatasource#"
tableName="feature" formFields="#Form.FieldList#">
<cflocation url="feature_RecordView.cfm>
<cfelse>
<cfquery datasource="#sitedatasource#" dbtype="ODBC"
username="#siteUserID#" password="#sitePassword#">
INSERT INTO feature (title, image, discription, Body)
VALUES ('#form.title#', '#form.image#', '#form.description#',
'#form.PDSeditor#')
</cfquery>
<cflocation url="feature_RecordView.cfm>
</cfif>

Can anyone help me? I am confused on how to make this work.
Thank you.
Phoenix

Las listas de reproducción de vídeos se eliminaron del ios6 así que tienes que modificar los archivos de cada video y modificarlos como programas de TV, es la única solución por el momento. Atentamente desde Chile. Esteban flores

Editing a Recorded Meeting

Similar Messages

Maybe you are looking for