EH&S Questionnaire

Hi All,
    I'm trying to create a questionnaire and assign it to a specific work area. I have a problem: I can't understand why the second questionnaire (related with the same work area ) holds, at the top, questions of the first questionnaire even if I have created (in CBIH52) parted questionnaire.
Ex: Work Area XY
questionnaire: "WA 45"
                        "WA 47"
Questions of "WA 45": 1) What' the US President?
                                      2) What's your name?
Questions of "WA 47": 1) What' the US President?
                                      2) What's your name?
                                      3)What's your hobbies?
In "WA 47", I want only: 3) What's your hobbies
Thanks
Marco

Hi Mark,
Through light on merge indicator for the protocol assignment category VOR. I believe the merge indicator may be activated/set in the protocol assignment while customising OH, usually needed to generate combined questionnaire for different health protocols for single person. Try once by de-activating the merge indicator to generate WA 47 which may be independent of WA 45.
regards,
mahesh

Similar Messages

Problem in Creation of Activity Request Questionnaire

Hi
I'm facing issue while creation of activity Request Questionnaire. After setting the status to complete & Clicking 'Ok' the activity is not getting created. Its showing 'Internal Error'
When I checked in Tcode SLG1 for error log, I'm getting following error.
I was not facing this issue with other activities. But when i use Request Questionnaire activity I'm facing the problem. The worst part is when i use this activity, all other activity start showing same problem i.e. if i skip Request Questionnaire & use other activity every thing works fine.
Please suggest
Regards

Hi,
Please check program " RCF_CHECK_SEARCH_SETTINGS" here all categories status to be shown in Green color.
BR,
Rajeswara.

Acrobat 9: compiling responses from multiple questionnaire responses into spreadsheet

I want to send out a questionnaire to 150+ individuals, then compile responses from all parties into one spreadsheet. The form uses drop down options and text fields.

You can compile the data from multiple PDF forms into a single spreadsheet in Acrobat, if that's what you're asking. I can't say for sure where that command is in Acrobat 9, but it should be somewhere under Document or Advanced...

Time limitation of the questionnaire

Dear Helpdesk!
I'm a satisfied Forms Central user since Aug. 2013. I created and used few questionnaires, and now I’m creating a new one. Now I have a problem. I would like to use this questionnaire as a test and I should use a time limitation. I mean when the responder open the Link which shows him/her the questionnaire, it would be nice a timer which shows him/her the remaining time of the filling of the questionnaire. If a responder run out his/her time limitation the questionnaire will closed for him/her. Can I set this function somehow in Forms Central?
Thanks in advance for your answer. VBRGDS: Zoltán Gábriel ([email protected])

Hi;
FormsCentral does not have any support for this type of a timer.
I think you could accomplish this by embedding the FormsCentral form into your own web site into a page where you implement a countdown timer. There is "Embed code" on the Distribute tab of the form to use for embedding into your own web page.
Thanks,
Josh

ADP Interface Questionnaire

plz very urgent ! send the questionnaire used for asking questions to end users and used in blue printing on ADP interface with US payroll

Thank you Chris.
For the first time i will be sending all the employee details to ADP.
Next time also i need to send the whole information? or i need to send the changes only.
If i need to send the changes only, how should i check that the change has been occured to a particular one.
Please help me out with an example.
Regards,
sudhir.

Need help implementing a Questionnaire page

Hi,
I have a requirement to build a web page which is like a Questionnaire page.
There are multiple questions and each question can have multiple acceptable responses. The responses can be either an Input text/Check box/RadioGroup depending on the Question type.
Each question can also have sub-questions depending on the responses. Each sub-question will also have its acceptable responses and further child questions. Currently we are supporting 5 level of parent-child questions hierarchy.
We are also planning to support the re-arrangement of questions. Is it possible to achieve this functionality using standard ADF components ? I am trying to implement the same using a Tree table. I created a self reference view link to display all the questions in a hierarchal manner. But for displaying the responses I was not able to define the relationship in the tree table.
The same thing I tried with forEach. Defined view links between Questions and responses VO. But I guess forEach does not support view links. So I was not able to get the responses corresponding to each question.
[UI Mockup|http://apps-ux.us.oracle.com/fusion_prototypes/v2/prc/PRC_Qualification/shells/questionnaire.htm] for this page.
Please suggest some approach to implement the above functionality.
Thanks in Advance,
Rakesh

The Questionnaire page will look somewhat like the below questions.
1.How long has your company been in business? //Parent question#1 : There are 3 radio group for selecting A/B/C.
A.○ 0-2 years
B.○ 3-5 years
C.○ 5-10 years
1.A.1 What is the founding month & year of your company? // For response A there are two sub-questions 1.A.1 & 1.A.2, 1.A.1 is of type I/p text & 1.A.2 shows 3 checkboxes.
1.A.2 Who are some of your key investors?
A.□ Advantage Capital Partners
B.□ Goldman Sachs
C.□ Others
1.A.2.C Who are your key investor(s)? // For response C to qn 1.A.2 this is a sub-question of type i/p text.
2. What is your annual revenue? // Parent question#2 which can also have sub-questions
A.○ $5-$10 million
B.○ $10-$15 million
C.○ $15+ million
Edited by: user775413 on Feb 14, 2011 9:42 AM
Edited by: user775413 on Feb 14, 2011 9:52 AM

I want to create a questionnaire and store the user answers in an array or a database

My project is creating a questionnaire in Flash and then storing the user answers in an array or a database for later analysis. although i was excellent in coding when i was in college, recently i forgot many parts.. so i need help badly to finish my project...

You should show what code you are having trouble with.

Best practice on creating a managable questionnaire/survey with JSF

Hello all,
As a part of a bigger project we need to build a questionnaire with managable questions. This means that clients can add/modify/delete questions as they wish. The database side is figured out and designed, but what im really thinking is how to collect the answers. The questions are populated from the database and the answers will be given either trough radiobuttons or textfields.
The thing i cant figure out is how to get the the answers of questions to the bean so they can be processed? It cant be said how many questions there will be so creating properties in to the bean beforehand wont work.
We are using jsf,hibernate and icefaces.
Thanks in advance.. this is really bugging me

Shoul have searched the forums a bit better. Solution found at http://forums.sun.com/thread.jspa?forumID=427&threadID=5117301 with some modifications.

Where do I start in order to create a summary report for a questionnaire?

I am creating a summary report for an internal questionnaire took by branches of a company.
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
The two tables in use are:
SQL> describe answers;
Name Null? Type
ID NOT NULL NUMBER(38)
QUESTION_ID NOT NULL NUMBER(38)
LABEL NOT NULL VARCHAR2(150)
The 'answers' table contains the answers for each question.
SQL> describe user_answer;
Name Null? Type
ID NOT NULL NUMBER(38)
USER_ID NOT NULL NUMBER(38)
ANSWER_ID NUMBER(38)
ANSWERED_QUESTION_ID NUMBER(38)
DATE_ANSWERED DATE
The 'user_answer' table contains the selected answer(s), from the 'answers' table, by the user.
There are 150 questions total in the questionnaire made up of either single or mulitple choice questions. As a sample, the first three questions look similar to:
Q.1 Do you use BIS or BES? Yes[] No[]
Q.2 What is your favorite phone shell colors? Green{} Red{} Black{} Silver{}
Q.3 Do you plan to purchase a new phone today? Yes{} No{} Unknown{}
I need to find the total for each possible answer for all the users. For example, I have four individuals who take the questionnaire.
Alpha answers the first three questions as:
Q.1 - Yes
Q.2 - Green, Red
Q.3 - Unknown
Bravo answers the first three questions as:
Q.1 - Yes
Q.2 - Green, Red, Black
Q.3 - Yes
Charlie answers the first three questions as:
Q.1 - No
Q.2 - Green, Black
Q.3 - No
Delta answers the first three questions as:
Q.1 - No
Q.2 - Green, Red
Q.3 - No
Using the two tables above, I need to produce the following summary.
Q.1 Yes - 2, No - 2
Q.2 Green - 4, Red - 3, Black - 2, Silver - 0
Q.3 Yes - 1, No - 2, Unknown - 1
Reading through chapter 9 SQL Queries and Subqueries at http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/queries.htm#i2068094, I'm not for sure if this is the right place to start? I'm testing with the GROUP BY and ORDER BY statements with not a lot of luck here either.
Any suggestions on how to get started or possible examples would be greatly appreciated.
Thank you.

Thank you.
I will be sure to include the CREATE TABLE and INSERT statements in the future.
Your example is appreciated and I've came up with the following solution for the report:
WITH summary_results
          AS ( SELECT     answered_question_id, answer_id, COUNT ( * ) AS cnt
                         FROM     user_answer
                    WHERE          user_id = 43798
                                   OR user_id = 2371
                                   OR user_id = 1731
                                   OR user_id = 19935
               GROUP BY     answered_question_id, answer_id
               ORDER BY     answered_question_id, cnt DESC)
SELECT     sr.answered_question_id, sr.answer_id, sr.cnt, a.label
FROM     summary_results sr, answers a
WHERE     sr.answer_id = a.id;

Creation of Vendor Registration Questionnaire

Hi SRM Gurus,
We need to Customize the questionnaire. We are able to Create the Questionnaire with some simple options like Question group, Question. However, We are unable to control the alignment.
Can anyone send some documents for How to Create a Questionnaire?
For your information, I referred the following, http://help.sap.com/saphelp_nw04/helpdata/en/ad/65decfcdc544799a92a9cea8e21b5c/frameset.htm
please send other documents.
Thanks in advance,
Ramkumar

Hi
Please go through this ->

Supplier Registration Questionnaire
error send questionnaire in srm Ros
Supplier Registration Table
Re: ERROR during supplier self registration
Vendor Evaluation questionnaire problem
Re: Modify text mail sended supplier in ROS
Re: Questionnaries in supplier registration
ROS Questionnaire Recipient Email in So50
Including validation in questionnaire
Supplier Registration
Re: Supplier Questionnaire Preview
http://help.sap.com/saphelp_srm50/helpdata/en/43/9e81410d23c37de10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/be/09283486c9ac42a20156c345f2a3fc/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/70/d394418ecead5fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/60/7386c8ad664924bc81ffc7e24083a6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/77/a498403de08368e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/de/2fd938c6fba936e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/cf/35074152aff323e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/6c/477b38ff08c939e10000009b38f842/frameset.htm
Some useful SAP OSS Notes to refer ->
Note 996810 ROS Prescreen error message correction
Note 827172 ROS: Questionnaire language
907258 ROS: Answered questionnaires are not displayed
889963 ROS: Questionnaires are not updated
867551 SRM VE: Questions/Questionnaires not in grouping
836781 ROS: Questionnaire language dependency => hidden links
836929 Consulting Solution: Survey Cockpit for Vendor Evaluation
829081 ROS: Repair report for additional language information
799937 ROS: General questionnaires after registration fails
797746 Display of category text in VE questionnaires
798654 ROS: No update of new completed questionnaire for CCMS
799302 ROS: Update deletes product category assignment and quest.
795335 ROS: Product categories or questionnaires are not sent
791624 Reading of product categories
783774 ROS: Several questionnaires for one product category
781906 ROS: Incorrect name of questionnaires in detail view
776530 ROS: Anewed sending of questionnaire incorrect
768059 Vendor evaluation: Evaluations from BW not extracted
766707 Vendor evaluation: Too many questionnaires to be filled in
764451 Questionnaire determin.: F4 displays too many questionnaires
167128 Only 15 entries are displayed in questionnaire pulldown
Hope this will help.
Regards
- Atul

Cannot get questionnaire HTML string SAP CRM 7.0 EHP3

Hello,
We are trying to use questionnaires in Activities and it doesn't work.
This error : Cannot get questionnaire HTML string is shown.
I checked Note 1600561 - Changes done in values template XSLT not taken into account, but it isn't valid for our release ( EHP3 )
Thanks in advance for your help.
Belén

Hi,
We used the questionnaires (questionnaires was displayed and worked) but we faced issues with the display in web UI (only when the questionnaires are linked to an activity/opportunity). The Admin screen for questionnaire works well).
We have implemented the following notes in order to correct this displaying issues :
- 1858059 : Upload the CRM_SVY_GENERATE_BSP_TEMPLATE.ZIP, refresh cash and generate all surveys
And then notes mentioned above
- 1914885 & 1944288 in the relevant order.
But we cannot display anymore the existing surveys (They are active, all scenarios are flagged).
Error message : Cannot get questionnaire HTML string
Any Ideas how to proceed to solve ? (we work on EHP2)

Questionnaire application in WebDynpro ABAP

Hi,
I would like to design the Questionnaire application in WebDynpro ABAP, which should be in the form of question and answers(4-5) as checkboxes/radio buttons.
For this scenario, how to design the Layout and Node structure?
Thanks and Regards,
Jhansi

Hi Jhansi,
I have created one such reusable component for SAP PPM.
I have used the structure /RPM/TS_QNNR_API.
It has the Question number, desc, and questionnaire group, UI option and has one entry per question per answer options.
For example if Q1 GRp1 has 4 options , it has four entries at runtime with Q1 Grp1 and opt1..opt4.
I have read this table in a node and the dynamically created one node per question.
On the basis of UI option value in the table I created corresponding UI element ( drop down, checkbox grp etc) and bound the node for it.
I will soon be coming with an article on this.
I hope this helps.
Regards,
Sumit

E-Recruiting Questionnaire Create error

Hello experts,
I have the folowing issue.
I am trying to create a Questionnaire and when I press create button I get the following error message:
"The error occured in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
Message No. HRRCF0001010
Main program: CL_HRRCF_ABSTRACT_CONTROLLER==CP
Subroutine: CL_HRRCF_ABSTRACT_CONTROLLER==CM001
Line in source: 56"
Could you give me some clues about it, please?
I have checked the customizing for Questionnaires and it seams to be alright.
I would appreciate if somebody can help me on solving the issue.
Thank you in advance!

Hello All,
I am also getting the error message
'The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
Message no. HRRCF0001010'
Can you pls suggest a possible solution to this?
Many Thanks,
Kanika

How to go from questionnaire to completed document

Hi all,
I am a lawyer and not very tech savvy, but I would like to streamline some processes with Adobe products, if possible. Specifically, I want to create an online fillable questionnaire and then have the answers from that questionnaire automatically imported into a document. For example, I would like to have a questionnaire where people list the names of their children and then those names are placed in the proper location in a trust document. Ideally, the finished product could be automatically emailed to the client, but if that's asking too much, I understand.
Any help on this issue would be very greatly appreciated. Thank you!
Wayne
http://www.mwpatton.com

In the upper part of the screen to the right of the search icon (a magnifying glass) should be an icon with 4 horizontal lines or with a box with three horizontal lines under it.. Tap that to see appointments at the bottom of the screen.

Questionnaires tables and reporting in CRM

Hello Experts
we have defied the Questionnaires in CRM for activites, after entering the values in to the Questionnaires and saved.
in which tables we can find the values for the Questionnaires whcih we have enterd, and how can we use the values in reporting.
ur inputs are highly appricated.

Hello,
The value are saved in table CRM_SVY_DB_SVS as an XML string. If you want to use it, it's beter to flag the BI export (Data storage and evaluation section in CRM_SURVEY_SUITE) so the information will be stored in CRM_SVY_DB_SV.
Regards
Stéphane

Recruiting problem with the candidate search by trex with questionnaires

Hi Gurus,
I am trying to search candidates using trex in recruiting by candidate_questionnaires but the trex does not show any result. How can I solve it?
When candidates register theirselves on internet, they complete questionnaires that I have added in the apllication wizard.
But the problem starts when I want to search candidates by the answers that they have complete in this questionnaire. So I select the criteria search candidate questionnaire, then I select the questionnaire and then the answer and I run the searh. I know that the results shown are always about others requisitions and not the one that I am doing the search. But in my case candidates are assigned in other requisition with the same process template so I do not know where is the problem, because other sort of search works fine. This is the only one that it does not work.
In addition, I have run the report RCF_CHECK_SEARCH_SETTINGS but the result is that all the parameters are fine except that I have not implement the badi HRAHAP00_FOLLOW_UP_SES. May I have to implement?
Moreover I have seen that when I select the answer to search, any operator (element of selection mask) is assigned but I have read that it is correct because I am using the search profile "int_cand" with the category "candidate_document" that it use in the mask search candidate_questionnaire.
In conclusion, I don't know how I can solve this problem with trex? Any idea?
Thanks in advance,
Juanjo Garcin.

I've already done it.
Do you think this will help?
I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

EH&S Questionnaire

Similar Messages

Maybe you are looking for