Ehancement Point not visible under my User ID

Hi All,
   This is the first time I am ever posting a question here, So, thanks a bunch in advance for trying to help me out. (I created a enhancement point in the user exit USEREXIT_SAVE_DOCUMENT_PREPARE in the sap include program MV45AFZZ (Sales Order Exits). I actually put the code in an custom include program Z_SO_INCLUDE1 in the ehancement point. I activated the enhancement point and everything was working as expected. But a week later I renamed the include program to meet the client's naming standard, double clicked the enhancement point, made sure it reflects the new include program and activated both the enhancement point and all the programs involved. The program/enhancement point works fine now, however, I am not able to see the enhancement point under my user id. I can see it under everyone else's user ID???? I really appreciate it if someone can help me out on this one. We are using ECC6.0/ERP 2005.
Thanks,
Sunny
Message was edited by:
        Sunny
Message was edited by:
        Sunny

I can't see the query because of which i don't know it belongs to which user group..

Similar Messages

My Custom repositories are not visible under content tab of ACC

Hi,
My Custom repositories are not visible under content tab of ACC ,eventhough i had appended my custom repository in /atg/registry/ContentRepositories.properties to the property
initialRepositories+=/myCustomRepository.PLEASE HELP ME.

Kindly make sure,
initialRepositories+=/com/training/club/tools/myCustomRepository
I assume you have config/com/training/club/tools/myCustomRepository.properties component. /com/training/club/tools/ is your path of component from config.
-RMisihra

HFS+ formated USB Disk not visible under Windows 7

Hello.
I recently purchased an APE and hooked a 4TB HFS+ drive via USB on it. Unfortunately it's not visible under Windows7. Though if I use a Fat32 formatted drive i'm able to access it. I even have macdrive installed. The drive is working properly if connected to the PC or MAC manually.
Please help

Hello exalderan. Welcome to the Apple Discussions!
FWIW. I currently have an external USB drive (NewerTech miniStack) connected to my 802.11n AirPort Extreme Base Station (AEBSn). I can access it from Windows 7 (Ultimate) from either a dedicated Windows PC or from a Parallels VM running Windows 7 without any issues. The 2 TB drive is formatted in HFS+.
What type of errors are you getting?

Services for object box not visible for some users

Dear All,
PM module experts please help. In equipment master transaction IE02 in left hand top corner we get box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem is it is not visible for some users. Our security/authorisation team has also done some check but didn't get any solution.
anybody knows the reason why there is no box availabe?
Thanks
SR

Dear Siddhartho Raha
I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
note are like this way 492331,this is not related to your query but same like it is and also may be
Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
Hope this may helps you
Prem.

One user from AD is not visible in portal user administration

Hi,
one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
Any ideas what could be the cause?
Maybe some settings/attributes for this user on the Active Directory side could be the cause?
Regards,
Ladislav

Hi,
Could you please check and confirm if the user,group path are the same for the
particular user on AD as that referred to by the portal. If not he would not be on the portal and
then there would not be kerberos too in place for him.
Rgds

Mac Photoshop layers not visible to Windows user

I'm using Photoshop CS6 Extended on a Mac. My client requested a PSD file saved with layers, which I provided. Her web developer is on Windows CS6 and is unable to see the layers in the file. Do you know why the layers are not visible to the Windows user?

Look under your PS Preferences > File Handling
How are you sending the file? Some email programs can alter files.
If you are saving a separate copy for your Windows users, see that layers is checked in the dialog.
Here's a screenshot for suggested File handling settings.

Constraints not visible under tables/dependencies

Hi,
when i open dependencies i see only type 'package body', 'trigger' but not any of the constraints pointing at this table.
i am using sql developer 1.5.5 and server version Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
E
Edited by: user7742585 on Jul 31, 2009 1:01 AM

Sorry, don't know anything about Macs.
You can try resetting to factory defaults by backing up/deleting the SQL Developer folder somewhere under your user profile (if that is called the same way on the Mac).
Hope that helps,
K.

Shared Tasks not visible to other User

Hello,
I am facing a problem that I have shared Tasks of User-A to User-B. But when I open shared Task at User-B MS Outlook it opens but no tasks of User-A are visbile.
For Testing
I Shared User-A shared tasks for myself with same permissions & are visible to me.
I Shared my Tasks for User-B & are visible to User-B.
I Shared User-B Tasks & are also visible to me.
I Created new Outlook profile for User-B, Upgraded Office Version from 2007-2010, Created new Windows login Profile, login him on some other PC but still User-B is unable to View User-A shared tasks.
I login User-B on OWA (Webmail) still User-B is unable to View User-A shared Tasks.
I have checked for User Mailbox permissions but found nothing.
Please help me to resolve this issue.

Hi,
If User-A shared a calendar folder to User-B, could User-B open the shared calendar in his Outlook? or are those calendar items visiable in that time?
If yes, please separately get the
Get-MailboxFolderPermission -Identity
[email protected]:\Calendar
& Get-MailboxFolderPermission -Identity
[email protected]:\Task
And then compare their permission to find the difference entry.
Or you may directly check the User-B's permission under User-A's folder:
Get-MailboxFolderPermission -Identity
[email protected]:\Task -User [email protected]
This might not the problem on User Mailbox permissions level but Mailbox folder permissions level. Thanks.
Tony Chen
TechNet Community Support

Netbeans not running under root user

I noticed that after installing Netbeans under user 'root', I'm able to use it under my user account, but it doesn't launch when I'm logged in as root. I'm running Arch x86_64 with XFCE in VirtualBox. Everything else works, including:
Firefox
Pidgin
Eclipse
SRWare Iron browser
It's not a big problem but when I'm logged in under my user account I can't install new plugins from inside Netbeans.
I tried running it from the command line but nothing happens, including when I try "sh netbeans -verbose".
I"m curious why I'm unable to start Netbeans when I'm logged in as root. Has anyone else experienced this?

Maybe you should reinstall it "as user" if you're experiencing problems with plugins installation.
Edit: IIRC you can use xhost to let root run GUI apps.
Last edited by karol (2010-09-01 22:26:09)

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Work items are not visible under UWL in portal ?

Hi,
We are upgrading from SRM 5.0 to SRM 7.0.
We have observed one issue here. Workitems are not visible in UWL in portal.
But workitems are available in SAP inbox. i.e SBWP.
Completed items we can see in UWL.
Could you please let me know any idea on this.
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

Hi Venkatesh,
Can you please share the solution? Which base URL was wrong and where did you correct that?
Your help is really appreciated.
I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
Thanks,
Bhavik

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

Upload multiple documents option is not visible for one user in SharePoint 2007.

Hi,
For one user Upload multiple documents option is not visible.
We are using SharePoint 2007 environment.
User is using IE 9 32 bit,Office 2010.
I did repair office 2010.
Active x controls are enabled.
Please anyone help me on this.
Thanks,
Ashok

Hi,
According to your post, my understanding is that after client upgraded to Office 2013 the option for Upload multiple document was grayed out.
I try to reproduce the issue in my environment, however everything works well.
My configuration of system is:
Windows 8.1;
IE11;
Office 2013 32bit.
Please repair the Office 2013 to check whether it works.
In addition, there are many thing you need to check. Please refer to:
http://sharepointknowledgebase.blogspot.com/2013/09/upload-multiple-documents-is-disabled.html
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
More information:
"Upload Multiple Documents" is disabled in Document Library
SharePoint 2010 : How to Enable Uploading Multiple Documents Functionality
Best Regards,
Linda Li
Linda Li
TechNet Community Support

IPCC extension option not found under End user on CUCM

Hi
I have a new deployment for UCCX express with CCM V 9.1, when i am trying to go under End user to assign the extension which will be user for IPCC , unfortunately i did not find IPCC extension option , i only find primary extension .Please help. I am unable to see the tab of IPCC extension , only find the selection for primary extension.The integration already done , everything is ok between CUCM & UCCX. + phone services for IPCC subscribe for end users
Thanks

Hi
+5 for MR/Chris
1- This is famous for fresh installation , especially on Vmware , kindly try to ssh CUCM and type the following:-
admin:run sql select paramname,paramvalue from processconfig
where paramname like '%nstalled%'
Thanks
Please rate all useful information

Folder Structure Not Visible under Content Administration

Hi all,
We have EP 6.0 SP13.The Folder structure(Both Business objects and Portal Content) under Content Administration and Folder structure under System Administration is not visible.I have logged in as Administrator and the roles assigned were:
com.sap.pct.crm.crm_default_services
Administrator
ContentManager
eu_role
super_admin_role
When i'm trying to access the portal content,Loading...is dispalyed in Content Area for a while and a message 'error occured' is displayed in the status bar instead of 'Done'.
I'm also having a problem in Detailed Navigation.Nothing is visible under Detailed Navigation.
Any Inputs on the above issues would be of great Help.
Thanks and regards,
Vijaya Sai.V

Hi,
There could be only 2 problems when PCD objects are not being shown.
1) You don't have the permission to view it. But since you are an administrator, you don't have to worry about it.
2) The browser is unable to show the PCD objects.
Now lets look at the solution:
I had faced the same issues where when I tried to access the portal using IP address, PCD objects will not show. So the solution is to access the portal through its "name" rather than the IP address.
I guess you would have tried to access the portal by its name, then you had faced an error in browser and so you are trying to access the portal by IP address.
if this is true, make an entry in the hosts file in your local machine, mapping the IP address to the domain name.
If you dont know how to do it, please follow the following:
Goto the following folder in windows
C:\WINDOWS\system32\drivers\etc\
You will find a file named hosts. Open it in notepad and give the IP address & domain name of the portal in the format specified there. Save the file. Now if you access the portal using its domain name, you should be able to see the PCD. If you are still not getting it, restart the machine and try once more. It should work.
If you are using a Linux system, the file can be found under the \etc under the root folder.
Regards,
Vijai.
Message was edited by:
Vijai Mohan

Ehancement Point not visible under my User ID

Similar Messages

Maybe you are looking for