EHP4 : DETERMINE_JAVA_PORTS

Hello,
We are installing the EHP4 upgrade (from EHP3 to EHP4) with the EHPi. One of the checks at the step INIT/PREPARE fails. Its on the JAVA side. The ABAP side succeeded completely. The error indicated says: "DETERMINE_JAVA_PORTS".
We already opened an OSS message to SAP, but we still facing that error. On marketplace I could not find any note that help me resolve that error.
Probably one of you already saw this problem.
Regards,
Rainer
The error log:
com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_JAVA_PORTS has been started.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDeterminePorts.\par
com.sap.sdt.j630.portsdetector.PortsDetector630 [Thread[main,5,main]]: Starting to determine the http service ports.\par
com.sap.sdt.j630.portsdetector.PortsDetector630 [Thread[main,5,main]]: The http port is 51200.\par
com.sap.sdt.j630.portsdetector.PortsDetector630 [Thread[main,5,main]]: The https port is 51201.\par
com.sap.sdt.j630.portsdetector.PortsDetector630 [Thread[main,5,main]]: Starting to determine the p4 service ports.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:871) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:872) [Thread[main,5,main]]: java.lang.ArrayIndexOutOfBoundsException: 0\par
com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:870) [Thread[main,5,main]]: java.lang.ArrayIndexOutOfBoundsException: 0\par
com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_JAVA_PORTS has been completed.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/05/19 11:38:11.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/05/19 11:38:11.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.032.\par
com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is aborted.\par

Here is the J2eeUpgradeRequest_mshsap17_12_02.log :
Jun 18, 2009 4:55:14 PM [Info ]: Adding JAVA directory E:\EHPI\java\htdoc as HTTP alias java
Jun 18, 2009 4:55:50 PM [Info ]: Initializing Road Map Step configure.
Jun 18, 2009 4:55:50 PM [Info ]: Preparing execution of modules INIT,EXTRACT,CONFIG,SHADOW_SECSTORE.
Jun 18, 2009 4:55:51 PM [Info ]: The Upgrade Tool is not running. Starting it.
Jun 18, 2009 4:55:52 PM [Info ]: E:\EHPI\jvm\jre\bin\java -ea -Dcom.sap.sdt.sync.slctrl=true -Xmx512m -XX:MaxPermSize=256m -Djava.system.class.loader=com.sap.sdt.bootstrap.SystemClassLoader -Dcom.sap.sdt.DSU=true -cp E:\EHPI\java\lib\sdt_bootstrap.jar com.sap.sdt.bootstrap.Startup -rootdir=E:/EHPI/java run prepare
Jun 18, 2009 4:55:55 PM [Info ]: >> Waiting for SDTServer to connect ...
Jun 18, 2009 4:55:56 PM [Info ]: Connected to host mshsap17 on port 6240.
Jun 18, 2009 4:55:56 PM [Info ]: >> connected.
Jun 18, 2009 4:55:56 PM [Info ]: List of action events initialized.
Jun 18, 2009 4:55:56 PM [Info ]: Status message STARTING received.
Jun 18, 2009 4:55:56 PM [Info ]: Status of the module INIT is ERROR.
Jun 18, 2009 4:55:56 PM [Info ]: Status of the module EXTRACT is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Status of the module CONFIG is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Status of the module SHADOW_SECSTORE is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Status of the module CHECKS is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Status of the module FINAL is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Event PREPARE=STARTED will be fired during this roadmap step.
Jun 18, 2009 4:55:56 PM [Info ]: Wait for ABAP upgrade to finish unit SAPup_configure_finished.
Jun 18, 2009 4:55:56 PM [Info ]: ABAP upgrade has finished unit SAPup_configure_finished.
Jun 18, 2009 4:55:56 PM [Info ]: Executing Road Map Step configure.
Jun 18, 2009 4:55:56 PM [Info ]: Executing modules INIT,EXTRACT,CONFIG,SHADOW_SECSTORE.
Jun 18, 2009 4:55:56 PM [Info ]: Fire synchronization event PREPARE=STARTED.
Jun 18, 2009 4:55:56 PM [Info ]: Progress bar initialized with number of phases 104.
Jun 18, 2009 4:55:56 PM [Info ]: Sending execute module INIT.Current status is ERROR.
Jun 18, 2009 4:55:56 PM [Info ]: Sending execute module EXTRACT.Current status is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Sending execute module CONFIG.Current status is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Sending execute module SHADOW_SECSTORE.Current status is INITIAL.
Jun 18, 2009 4:55:56 PM [Info ]: Upgrade Tool is Starting Execution of Module INIT.
Jun 18, 2009 4:56:01 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:01 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:01 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:01 PM [Info ]: >> value[2]=http
Jun 18, 2009 4:56:01 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:01 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:01 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:01 PM [Info ]: >> value[2]=http
Jun 18, 2009 4:56:01 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:01 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:01 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:01 PM [Info ]: >> value[2]=p4
Jun 18, 2009 4:56:01 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:01 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:01 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:01 PM [Info ]: >> value[2]=p4
Jun 18, 2009 4:56:03 PM [Info ]: Upgrade tool is processing error dialog.
Jun 18, 2009 4:56:21 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:21 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:21 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:21 PM [Info ]: >> value[2]=http
Jun 18, 2009 4:56:22 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:22 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:22 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:22 PM [Info ]: >> value[2]=http
Jun 18, 2009 4:56:22 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:22 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:22 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:22 PM [Info ]: >> value[2]=p4
Jun 18, 2009 4:56:22 PM [Info ]: >> pattern = cluster_data/$/ID$/services/$
Jun 18, 2009 4:56:22 PM [Info ]: >> value[0]=dispatcher
Jun 18, 2009 4:56:22 PM [Info ]: >> value[1]=126791400
Jun 18, 2009 4:56:22 PM [Info ]: >> value[2]=p4
Jun 18, 2009 4:56:23 PM [Info ]: Upgrade tool is processing error dialog.
 
Don't know how to format that here, its terrible like that. Sorry for this.
 
I found this in the server.trc log file:
 
Jun 18, 2009 4:55:54 PM [Error]: com.sap.sdt.sapjup.rapi.connector.SAPJupConnector [Thread[Java_EE-4,5,main]]: Could not connect to mshsap17:6240. Could not connect to host mshsap17 on port 6240.
java.net.ConnectException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
 
Could that be the problem? Maybe the firewall is blocking that port?

Similar Messages

Problem in automatic PO creation after EHP4 upgrade

Hi experts,
We upgraded our system from ECC6.0 to ehp4. When I am trying to use ME59n to create a PO automatically from a PR, I get a dump "Please maintain services or limits". Item category used is either 'B' or 'D'. The same was working fine earlier in ECC6. Could someone help me as to what could be the issue?
Regards,
Hema

Lakshman has explained
you need to have the source list setup (make sure info record exist) or contract is exist and it is assgned to the source list
but as per your email the source is determined in the PR that means source are setup properly
now check the variant of your back ground program of AutoPO
if the variant is not matching with your PR's than it will not creates the PO
so create few PR's and test it with ME59N with the background job variant and see how it is going
some time in the variant let say you have setup the release date but if it is not matching with PR release date than it will not create the PO
so in short you need to test same varinat online than setup for back ground.

EHP4 Upgrade ABAP+JAVA stack

Hi SDN Team,
We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
Trouble Ticket Log
===============
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SE1
Hostname...........: NA00SAPSAND02
Install directory..: g:/usr/sap/SE1
Upgrade directory..: G:\EHPI\EHPI\java
Database...........: Microsoft SQL Server
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
We have added the system in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
PREPARE_JSPM_QUEUE_CSZ_02
===========================
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jul 27, 2010 3:48:22 AM [Warning]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Warning]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
Not sure what to do now.please advise.
Regards
Uday

Hi Uday,
> Jul 27, 2010 3:48:22 AM [Warning]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Warning]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Info]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
I can see in the log that stack xml you are using is not for the system to whom you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
Thanks
Sunny

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399 patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399 ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399 (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

Upgrade from 4.6C to ERP6.0 EHP4 NW7.01 fails on EHP_INCLUSION

Hello dear friends at SDN forums,
We are performing an upgrade from a 4.6C Non Unicode source release to a SAP ERP 6.0 EHP4 based on NW 7 EHP1 Non Unicode.
Every phase has gone more or less fine until the current phase EHP_INCLUSION in SAP EHPI tool.
We are trying to specify the stack file manually, cosu00B4 SAP EHPI does not find it automatically via RFC against Solution Manager. I donu00B4t discard a possible missconfiguration in the RFC destination "BACK" configuration (the one that points from our target system to the Solution Manager), but thatu00B4s another story.
Anyway, that shoulnu00B4t be relevant for the trouble Iu00B4m expressing.
As we are on source release 4.6C I must make use of the .txt stack file and not the .xml file, as per SAP notes.
The symptom: everytime I retry that EHP_INCLUSION phase, it complaints about "Sever errors detected. Error Code = -1. Reason: The stack configuration does not contain a product stack".
Iu00B4ll also paste here the contents of the EHP_INCLUSION.log trace file:
1 ETQ201 Entering upgrade-phase "EHP_INCLUSION" ("20100715150020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "D:\usr\sap\CES\SYS\exe\run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "
dbapru001\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20100715150020
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100715150024
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "C:\SMSDXML_CES.txt"
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration does not contain a product stack")
That file was generated from Solman Mopz, was saved with a short path name just in case it could be problematic.
The Solman is on version NW 7 EHP1. Our 4.6C SPAM version is 50 (the latest available).
Iu00B4ve been fighting this issue for several days unsuccessfully, and it seems like thereu00B4s no documentation on it.
Iu00B4ve re-read SAP notes , master, EHP and upgrade guides several times, and also similar problems (but not exactly the same as mine) here at SDN forums.
Besides, now Iu00B4m having a problem to create customer messages to OSS which will last a few days (due an issue with our old installation number in SAP Service Marketplace). Thatu00B4s why Iu00B4m trying to obtain support from this forum, before we can obtain a response from SAP OSS.
Has anybody experienced something similar?
Thanks in advance for your help.
Javier

Hi FDK,
As far as I´m concerned, I promise I will write how we solved it when we get it.
The news are: at last we could create a customer message to SAP Support, and SAP has told us to:
1) Ensure that our Solution Manager is in a sufficiently high SP Stack level. In our case, as we have a Sol. Manager based on NW 7 EHP 1 with SP Stack level 20, they are asking us to apply SP Stack level 22 as first meassure.
2) In case we cannot afford to do the mentioned meassure immediately, then they suggest us another possibly working option: to downgrade our SPAM 4.6C from level 50 to 48. There is a SAP Note that explains how a reimport of a Support Package for SPAM can be done (and it seems like it´s even possible to downgrade the SPAM level, I didn´t know that):
SAP Note 684564: Re-importing a SPAM/SAINT update
So, now we are working on these suggestions. As the Solution Manager is really not "ours", but belongs to our SAP VAR (partner), we need to wait until they can schedule this technical task.
So, right now the immediate task I´m trying to perform is downgrading our SPAM 4.6C from level 50 to 48.
But, I have a problem and have just let know it to SAP in the customer message: I have no way to get such level 48 of SPAM 46C. SAP always only hosts the last (or the 2 most recent as much) version of SPAM in the Software Download Center of SAP Service Marketplace. Thus, right now if you navigate in SAP Service Marketplace you´ll only find the 50 level version of SPAM 4.6C. I´m again waiting for SAP ´s response concerning this.
Best regards,
Javier

Error while applying EHP4 to ERP6.0-phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!

while i was applying EHP4 to my ERP6.0 system using Enhancement Package Installer i got the following error in the Downtime roadmap:
Severe error(s) occured in phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!
Last error code set: RFC_ERROR 2: DUMP_ERROR
i checked the RSUPGBWD.LOG and here is what i found:
1 ETQ201 Entering upgrade-phase "JOB_BATCHCHECK_XPRA" ("20110503131506")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/JOB_BATCHCHECK_XPRA'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'RSUPGBWD'
2 ETQ399 Arg[1] = ''
2 ETQ399 Arg[2] = 'IGNORE'
2 ETQ399 Arg[3] = 'RSUPGBWD\.$(SAPSID)'
2 ETQ399 Arg[4] = '3'
2 ETQ399 Arg[5] = 'Batch execution checker'
2 ETQ399 Arg[6] = 'RSUPGBWD.ELG'
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ010 Date & Time: 20110503131506
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
5 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
i also check ST22 for the error and i found this:
Runtime Errors         CALL_FUNCTION_CO
Date and Time          03.05.2011 13:15
Short text
     RFC error when sending logon data.
What happened?
    An error occurred when executing a Remote Function Call.
What can you do?
    Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred when executing a Remote Function Call.
    Status of connection.... "-"
    Internal error code.... "-"
How to correct the error
So any clue with that error?

Hello Waseem,
I would recommend to update to the latest disp+work but also check in sm21 and find the work process that encountered the error. Then see in the corresponding work process trace file dev_w* for the real error that occured.
e.g. If you see ERROR => RFC Signon> Failure in ab_MakeTicketSndExternal calling
check note 1532825
and the report RS_TT_CLEANUP_SECSTORE
Regards,
Paul

Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION

In my upgrade from enterprise 4.7 ext.set 11.0 to erp 6.0 ehp4 I have the error:
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the IS_SELECT and the BIND_PATCH phases is taken
from there. For more information, see SAP Note *1022704* .
01) * Cancel dialogue
02) - Repeat stack request from MOPZ (failed with 'No access to Solution Manager System')
03) - Provide stack configuration file in input field below
Select configuration:: Cancel dialogue
I don't want to include any further EHPS. Do I have to extract all packages from DVD EHP4_for_SAP_ERP6.0_NW7.01_Enhancement_Package (mat no 51033594)
Do I have to generate a sp_stack.xml, too ?
EHP_INCLUSION.LOG:
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "\\<transporthost>\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20090528151215
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090528151216
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
Any ideas ?
Edited by: Uta Hedemann on May 28, 2009 3:40 PM

Hello,
We are performing an installation of EnhP4 with 7.01---SP stack 3. We are not able to continue from the error below. I am able to view the xml file from however SAPehpi is saying the file u201CError reading stack info (rc=3, reason="Stackfile not foundu201D.
I am not able to download another stack from Solmanu2026I am not able to select any Technical Usages to download the files for the stack version.
Any ideas?
EHP_INCLUSION.LOG
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
Regards,
Anthony

Create SSO on SAP portal to ECC 6.0 EHP4 backend

Hello,
I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security Provider --> Ticket.
Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
I attach a screen shot from Visual administrator.
Kind regards,
Richard Meijn
Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

Cahtal,
Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
If I write something wrong please correct me. I understand the following
So If I am on the "Authentication" tab I press the Add new button
In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
Kind regards,
Richard Meijn

Query regarding HRP table updation in EHP4

Hello Experts,
Recently we have upgraded our system to EHP4 and we have done data migration of the E-Recruitment to Career Profile (eg. data migration from HRP9301 to HRP7402 infotype).
The infotype HRP7402 has a field called TABNR at the last and there is an include provided where we have included 2 more essential fields.
But when i am updating the HRP7402 (internal table has the correct data), this TABNR (length 32) is getting filled in the infotype automatically which is fine but it is having leading spaces because of which the remaining 5 characters are being moved the other 2 fields (the fields which are included in the include provided) after this field.
The same TABNR is getting populated perfectly in other infotypes where it is the last field and there are no additonal enhancements done in the standard include provided.
Please let me know on how can i resolve this problem of leading spaces which are automatically getting added up. And I am not clear on where this TABNR is getting filled up in the FM. The following is the code snippet....
        CALL FUNCTION 'RH_INSERT_INFTY'
          EXPORTING
            fcode               = 'INSE'
            vtask               = 'D'
            order_flg           = 'X'
            commit_flg          = 'X'
            authy               = 'X'
            repid               = sy-repid
            form                = 'FILL_DATA'
          TABLES
            innnn               = it_p7402
FORM fill_data TABLES ct_tabinfty_tab
USING ct_infty TYPE any
        ct_tabix TYPE any.
CLEAR ct_tabinfty_tab. REFRESH ct_tabinfty_tab.
ct_tabinfty_tab = ' '.
APPEND ct_tabinfty_tab.
ENDFORM.
Thanks
Raj Kishore

Sorry to intervene here Dhina but that is just halfways correct.
If delivery class NOT = C then it is NOT a customizing table and therefore you wont get any transport request updating or deleting data from it.
But if it is a customizing table then you got to look for the recording routine. You can see this by viewing your table in SE11, then using the menu like following:
utilities->table maintainance generator.
Then look at the info in the bottowm frame. if "standard recording routine" is tagged, then you get a transport request.
If the other option is tagged you wont get it. What again means you can customize this table directly in the system where you need those entries.
why is that?
well assume there is a customizing for e.G. materials, depending on materialnumber. If that table would have a standard recording routine you would need ALL your materials in your development system which would be quite unusual.
Edited by: Florian Kemmer on Jun 9, 2011 2:00 PM
some typos corrected, left some for sure

Error while doing EHP4 upgrade in downtime phase

HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.

Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny

Oracle Follow-Up activities after EHP4 Upgrade

Hi!
I am currently executing the EHP4 Upgrade for SAP ERP 6.0 with Oracle.
After doing so I need to execute several oracle specific actions
Can some one give me technical documentation for the following actions:
1) Delete all empty Tablespaces
Question: How (SQL commando) can I identify which of my tablespaces are empty?
2) Tablespace "PSAPSR3700" should be released/deallocated
Question: what does it mean?
3) Load generation ???
Any helpful information will be very appreciated
Jürgen

> 1) Delete all empty Tablespaces
> Question: How (SQL commando) can I identify which of my tablespaces are empty?
You can check that using brtools.
> 2) Tablespace "PSAPSR3700" should be released/deallocated
> Question: what does it mean?
The sources are in PSAPSR3701 with EHP4 so that old tablespace is no more needed.
> 3) Load generation ???
Yes -run SGEN.
Markus

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

XPRAS_UPG error in DOWNTIME phase in EHP4

Hi,
I am getting the below error in XPRAS_UPG in DOWNTIME phase of EHP4 installation in ERP 6.0 on HP-UNIX and Oracle.
XPRA ERRORS and RETURN CODE in SAPRW70104.HD1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "10302400")
Long text:
 Cause
 Program "&V#&", which was started in the background, was terminated
 abnormally.
 System Response
 The system created a job log for the terminated program.
 What to do
 Proceed as follows:
 Log onto the system in which the program was executed. The system is
 specified at the beginning of the transport log.
 Then call transaction SM37 to display the job log.
 Enter "&V#&" as job name and "DDIC" as user name.
 Restrict the starting date to the starting date specified in the
 transport log.
 For the other selection criteria, select only jobs with the status
 "cancelled". Then press <LS>Execute</>.
 A list of the jobs satisfying the selection criteria is displayed.
 You can display the log by pressing <LS>Job log</>.
 If the list contains several jobs, you can select the job with the ID "
 &V#&" with <LS>Display</> -> <LS>Job details</> or define further
 details for the selection criteria in the initial screen of transaction
 SM37.
 If the ABAP processor reports cancellation, double-clicking on the
 corresponding message in the job log branches to the display of the
 corresponding short dump.
1AEPU320 See job log"RDDEXECL""10302400""HD1"
1 ETP111 exit code : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I was successfully able to umlock the system and in SM37 I could see the job log pointing to ST22. In ST22 we have many dumps related to error PXA_NO_FREE_SPACE. I found many notes in marketplace but all are referring the parameter abap/buffersize which needs to increased. I am a bit apprehensive about the fact that since we are in DOWNTIME phase and in the middle of XPRA execution phase should we increase the parameter and restart the system and then continue with the upgrade???
I have also tried to run the phase many times but the same error persists.
Please can anyone help me to come out of this problem.....
Thanks & regards,
Rozal

Hello Rozal,
You are correct XPRAS is a downtime 2 phase, but actually your system is up and running. It was started way back in phase "STARTSAP_NBAS" its just that you cannot use your system productively. XPRAS executes the XPRAS methods in the running system.
Its absolutely safe, you can change the parameter take a restart and continue further.
- Niraj

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Questions on EHP4 upgrade

Hi friends,
I have just completed an EHP4 upgrade on ERP 6.0 system
Environment is Win 2008 and DB2 9.1
1. Just before the downtime started, ehpi inst came up with a screen which informs to
a. backup installation directory and take a database backup @ this point
To restart installation from this point --> restore database and program directory
At this point, I can either enter downtime or go productive again, reverting back the changes
Next line says --> If you restored the system to this point from the backup, you can also chose to go productive again. You can enter downtime later
What does this line mean, i just cant comprehend it in this scenario
2. During upgrade, manual actions require creation of the below 4 tablespaces with different initial sizes
SID#EL701DX
SID#EL701IX
SID#ES701DX
SID#ES701IX
Now that i upgrade is complete, is it SAFE to delete these freespaces, which i understand were used by shadow system
if yes, then why doesnt the EHPi installer delete it itself as part of post processing
Thanks in Advance
Shanmuga

Thanks Markus
It means that if you had a problem and you restored the system, then you can go back to production or continue with the upgrade.
Does it mean, going productive will mean all the steps till preprocessing will be of no use, unless i restore backup and inst directory, which will then lose out on all productive changes after backup(taken earlier)
- they are still needed (those tablespaces contain the Netweaver basis 7.01)
- EHPI never deletes tablespaces on his own. Doing that task is part of the post processing (read the upgrade guide).
As per the guide, i need to run the command
my kernel release before and after upgrade is 701
i substituted REL to 701 in below command
select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%701%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )
SID#EL701D
SID#EL701I
SID#ES701D
SID#ES701I
Should i delete these tablespaces, these tablespaces were available earlier, the new ones created during upgrade had a suffix X to all these tablespaces
Edited by: Shanmuga Sundaram on Jun 16, 2010 11:08 AM
Edited by: Shanmuga Sundaram on Jun 16, 2010 11:13 AM

EHP4 : DETERMINE_JAVA_PORTS

Similar Messages

Maybe you are looking for