EHP4 Upgrade in Solution Manager 7.1 system

Hi
i recently upgrade the Solution Manager system from 7 to 7.1.
Now i'm asked to upgrade the Ehp4 for Solution Manager 7.1 system. Couple of questions...is it possible to install Ehp4 (which is only available for ERC ECC 6) to the Sol Man 7.1 system?
I searched in market place to download the Ehp4 , but it is only available for 7.01...Which is the right media to be used....?
EHP4 FOR SAP ERP 6.0 / NW7.01
Product Availability, Maintenance Dates & Supported Platforms
Installation
based on SAP NetWeaver 7.01
based on SAP NetWeaver 7.3
Upgrade
based on SAP NetWeaver 7.01
based on SAP NetWeaver 7.3
regards
Chan

Hi,
EHP4 is only available for ECC systems. For more information on the product please review the below links
http://service.sap.com/erp-ehp
Regards,
Naveen.

Similar Messages

EHP1 upgrade of solution manager-any effects in landscape due to common SLD

Hello All,
We have ECC,BI,SRM,XI,EP,MAM and BD in our setup and yes of course Solution Manager dev and prod
We have our SLD installed on solution manager production which is common for all the systems of the landscape
Now we have performed EHP1 upgrade if Solution manager dev and now we are planning on solution manager production
So just want to know,do you forsee any issues after we upgrade the solution manager production to EHP1 in respect to SLD or can there be any issues in the landscape because of this upgrade?
Please let me know your suggestions
Rohit

> So just want to know,do you forsee any issues after we upgrade the solution manager production to EHP1 in respect to SLD or can there be any issues in the landscape because of this upgrade?
The SLD is not affected.
However, SolMan EHP1 requires a LOT of separate notes to be applied.
Note 1172948 - SAP Solution Manager - Basic functions
Depending on what scenarios you use, you will also need to upgrade ST-PI in the external systems before EWAs will be again correctly created.
Markus

Oracle upgrade in Solution Manager 10g to 11g

Dear Expert team ,
Our Solution Manager is running in Windows 2003 with oracle 10g .
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
SQL>
Now I want to upgrade my Solution Manager 10 g to 11g .
what oracle component should I download and how to upgrade 10.2.0.2.0 to 11.2.0.3.0.
Please suggest.
Regards
Pooja

Hi
The upgrade is possible as stated in the here under note.
Previous version (v15) of that note was even a bit more clear it is possible but version 10.2.0.4 is preferred.
Direct upgrade from 10.2.0.2 should not be a problem, as it is even possible to have a direct upgrade from 9.2.0.8 to 11.2.0.4.
1431793 - Oracle 11.2.0: Upgrade Scripts
A database < 9.2.0.8 must be upgraded to 9.2.0.8 before it can be upgraded directly to 11.2.0.4.
You should consider jumping directly to 11.2.0.4 that is the latest 11g version and the only one that will have a long term support.
Regards
1431797 - Oracle 11.2.0: Troubleshooting the Database Upgrade
For a database upgrade from 10.2. to 11.2 the minimum release is 10.2.0.2. This release is not supported any more.
1431797 - Oracle 11.2.0: Troubleshooting the Database Upgrade v15
We strongly recommend a minimum release 10.2.0.4 for the following reasons:
a) All SAP internal database upgrade tests have been performed with
release 10.2.0.4. This upgrade path has been very well tested and
is documented in the SAP Database Upgrade Guide for Oracle Release
11.2.
b) Oracle Database Release 10.2.0.2 is not supported any more.

Solution Manager PostProcessing after system copy

Hello,
I have made a system copy of a Solution Manager 7.01 system and I cannot find any Solman Specific postprocessing tasks.
I'm wondering specifically regarding cleanup of SMSY and Solutions etc.
Do anyone have such documentation or know if it is available somewhere?
Observe that I'm not talking about the general postprocessing after a systemcopy, but specifically for Solution manager components, such as SMSY and MOPZ etc.
I have ran report from note 1300107 with variant to remove all reports older than 1day to clean up table DSVARSRESULTSGEN.
Best regards
Tomas

Hi there,
No sure i understand your question 100%, but here is how i understand it:
You've had a solution manager set up for a system (lets say system ABC, with DEV, QAS, PRD)
Now, you want to set up a solution manager for another system (system XYZ, with DEV, QAS, PRD)
so you copied the settings from system ABC, renamed it to XYZ and now you just want to configure XYZ?
Is that correct?

Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

Hi all,
I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
Is someone know if it is normal or if it is necessary to patch solution manager ?
Is ther a documentation existing to configure ERP EHP4 systems ??
Thanks for your answer.
Regards
Gerard

I have not seen any document to configure EHP4 systems specfically.
I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
You might want to have a glance over some notes
Note 1283307 - SMSY: Product version cannot be determined correctly
Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
Note 1320545 - Updating the product version in SMSY

Technical Upgrade using Solution Manager

Hi All,
I am aware of the Maintainence Optimizer in SolMan to download Support packages/Enhancement Packages. Does the solution manager support a technical upgrade of a system as well? Please provide your suggestions. I was not able to find any information regarding this and am not if this is even supported.
Thanks in advance,
Srikishan

Hi
You may want to visit the upgrade road map information is available in this link
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Cheers,
Sh

Migration / Upgrade SAP Solution Manager

Hi
We are using Solution Manager 3.1, W2000 Server, Intel, Oracle.
Now it is necessery to Upgrade Solution Manager 4.0, to new Hardware with Windows x64, AMD, Oracle.
It was very helpfull for me, if somebody could explain me the steps to do that.
Thank you very much
Selim

first of all it is obsolete (because based on 8.1.7) and did not cover the central needs of the request ( Oracle9 to Oracle10 during a 32Bit/64 Bit migration)
second it is based on Unix, will not help Windows users very much.
third it is not supported, the only supported resources are documented via http://service.sap.com/instguides look for your version, homogenious system copy guide.
fourth: there are some mistakes in it: you need a new saplicense, at least on windows.
fith: it does not document at all what additional manual steps are necessary if the system is a newer system with a lot of functional links into other systems.
Peter

Solution Manager 4.0 System Copy

Hi All,
I am trying to do system copy of solution manager 4.0 , please let me know if any once has a procedure for it
1) Is it same as R/3 4.6C system copy ?
2) Schema owner is SAP<SID> in sol man. do I need to performed any special task for it.
I would appreciate if some one can guide me on this as I am doing this first time.
Regards
Atul-

Hi atul,
welcome.
see these links
http://www.scribd.com/doc/3344299/Sap-Solution-Manager-Guide-to-Plug-System-using-LongSID
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/1064eda7-53a0-2a10-fcbb-d4090f105d41?prtmode=print&startindex=61
http://sapbasisnotes.blogspot.com/2008/05/solution-manager-40-on-windows-oracle.html
http://www.saptechies.com/step-by-step-procedure-to-generate-solution-manager-key-smsy-solution-manager-40/
thanks
karthik

How do I setup RFC if Solution Manager and Target system are in same server

Dear Experts,
How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
Do I really need to setup RFC?
regards,
Abraham

Hello,
An RFC is a Remote Function Call and is used to communicate between computer systems.
A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
When you setup the RFC Target it is the Host and not the system that is specified.
You can get the host information when logged into the ERP system by running transaction SM59.
This would then be the target Host in the RFC from Solman to the ERP system.
As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
But if you continue to have problems please advise.
Regards,
Paul

Regarding authorization in solution manager for Central system monitoring

Hi,
I want to Prevent users from deleting Task logs in central system monitoring
in solution manager
I have assigned the roles SAP_SV_SOLUTION_MANAGER_DISP
But it gives display authorization for everything unable to keep track of
changes in monitoring
Can anyone please help me to prevent users from deleting task log history
Since I have to keep track of one month data
What can be the suitable role for it ? or what authorization objects i should
make a change to prevent deleting tasklog.
Kindly help me in this regard
Regards
Sanjeev.S

Thanks for your prompt reply
I am not saying about SDDCN
In transction solution_manager => opertation set up = > central system
administation
we will do manual monitoring for sattelite systems in this path. what we monitored
will be entered in task log history.
So what can be the suitable role to prevent the deleting of the task log history.
There is option delete task history. if any one by mistake clicked on that ,all the
records of monitoring will be lost.
so kindly suggest me a suitable solution

How to include an enhancement package with upgrade without Solution Manager

Hello,
I have been trying to do an upgrade from SAP R3 46C to ERP6 in my sandbox. I want to include Enhancment package 3 with the upgrade. I have tried using the Solution Manager to download the Enhancement package and it work fine except that it did not create the XML Stack configuration file that the upgrade is looking for. Therefore I downloaded the DVD for Enhancement package 3 and included that in the mounted CDs in the PREPARE portion of the upgrade and it does not recognize it.
Now for my question, is there a way to include the Enhancement package with the upgrade without using Solution Manager? If so, could someone please let me know where to find the information or share the procedure with me?
Thank you in advance,
Ron

The EPs are just like support packages (optional); if the upgrade is not letting you put it during upgrade then just do it once the upgrade is completed.

Solution manager "Maintenance Optimizer" System Logical Component

Hello friends!
I have some troubles with my Solution Manager!
After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction.
Steps for reconstructions:
1) start tcode SOLUTION_MANAGER
2) select my solution from list (the same like in tcode dswp)
3) goto Change Management --> Support Package Stacks --> Maintenance Optimizer
4) chose product version SAP ERP 6.0 (it is assigned to my solution)
5) in appears grid I don't see system (see below)
I----II--
I
I_V_I_System_I_Logical Component_I
Before installation I can select my solution. Now it's not critical because I can confirm downloads...

Hi Luke!
I didn't solve this problem...
But I've only one system in my solution, and, as I understand, it may not be showed. But I may be wrong...

Upgrade to Solution Manager 7.1 missing Master upgrade DVD

Hi,
I'm upgrading Solution Manager 7.0 EHP1 to Solution Manager 7.1 . I've got the following error;
Please enter mount points for the DVDs required for the upgrade.
Enter at least the mount point containing "Upgrade master DVD"
I Can't find this "Upgrade master DVD" on market place. I've opend an OSS message but no answer yet. Anyone had that problem?
Thanks!

I had the same issue. It turns out that what it was really asking for was a SAP Kernel DVD in the correct format.
When I downloaded the SAP Kernel DVD from the Market Place, the Zip file included a directory for my platform at the first level on the DVD, and then in that directory it contains the LABEL.ASC file.
You need to ensure that when you stage the Kernel DVD, the LABEL.ASC files etc should be in the Top Level directory, or it won't be recognised as a DVD, and you'll get the erroneous message about needing an "Upgrade Export DVD" (which does not exist for Solman 7.1).
Hope this helps!

Upgrade to Solution Manager 7.1 stopped in phase DEPLOY_ONLINE_DEPL

Dears,
we are upgrading our Solution Manaher from Ehp1 for Nw 70, to Nw.71.
While on the ABAP tab is in progress the phase MAIN_NEWBAS\TABIM_UPG on the J2EE tab we are blocked in phase DEPLOY_ONLINE_DEPL.
As suggested from the Ehpi screen we read note 1399846, but our case is different so the note is not usable.
First in the logs we have the message:
Mar 5, 2012 4:54:26 PM [Info]: Processing request to deploy queue sapjup-queue.
Mar 5, 2012 4:54:26 PM [Error]: Login not performed yet. JSPM not initialized.
Mar 5, 2012 4:54:26 PM [Error]: Could not process deploy queue sapjup-queue request.
Mar 5, 2012 4:54:26 PM [Error]: java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.jspm.model.JspmDataModelIF.save() of an object loaded from field com.sap.sdt.jspm.deployment.queuemanager.QueueManager.dataModel of an object loaded from local variable this
Mar 5, 2012 4:54:26 PM [Error]: Login not performed yet. JSPM not initialized.
That's different respect to the Oss note, then second we did not start manually the JSPM.
How we can go ahead ?
We did not find any Oss Note for this error.
Regards

after a reboot of the system and a restart of the upgrade process the
error changed and it was as described in note 1399846.
So we applied the workaround suggested, but now we have a new error.
If we restart the upgrade process doing first startsap(so starting both Abap+Java), the upgrade process for the J2EE tab complains the stack provided and used till now (we are already in the DOWNTIME phase) does not match the system status.
If we restart the upgrade leaving the Abap+java instances down the upgrade process complain the SDM is nit 'is not
able to connect to the system.
I read somewhere It's possible to disable the upgrade process for the Java stack, in order to complete that one for the ABap stack.
Then for the Java Stack we could use the normal JSPM, but I'm not able to find the relative Oss note.
Any advise ?

Some quick question for solution manager in 2 system landscape

First of all is there any way to not implement Solution manager but to still be able to patch the system.?
i really need it only for this.
If there is no way to avoid the solution manager, tell me is the saprouter the only way for connection to SAP for the patches download. I don't need anything else for now.
IS there a way to use a direct connection to SAP,?
do the sAP router has to have 2 NICs where one is the public and one the private IP?
i need to solve this one quickly so any help would be appreciated
Thank you in advance!

Hi,
you do not need Solution Manager to patch the systems but you need Solution Manager to approve download basket for downloading pacthes.
Information regarding the connection to SAP can be found at:
Note 35010 - Service connections: Composite note (overview)´
Hope this helps.

EHP4 Upgrade in Solution Manager 7.1 system

Similar Messages

Maybe you are looking for