EJB modules were found for this application

I'm deploy may application on weblogic server 10R3
myejb.jar file is deployed success
When I deployed mayapp.war, the following error occured.
*weblogic.deployment.EnvironmentException: [J2EE:160167]The module jvcwebapp.war in application jvcwebapp uses ejb-links but no EJB modules were found for this application.*
web.xml
<ejb-local-ref>
<ejb-ref-name>ejb/local/SessionEJB</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local>model.SessionEJBLocal</local>
<ejb-link>SessionEJB</ejb-link>
</ejb-local-ref>
thanks
Thiensu2810

The module abc-ViewController-context-root in application abc_Project1_abc uses ejb-links but no EJB modules were found for this application
Is the application deployed as an EAR application with web and ejb modules? If not, deploy as an EAR application.

Similar Messages

  • Adobe Air Aplication descriptor could not be found for this application

    Can You Please help me it s so importan i downloaded program and it required adobe air i downloaded it then it says aplication descriptor could not be found for this application

    I have the same problem,I downloaded program
    And it required adobe air, then I downloaded adobe air but then when I tried again to open that program I get an error message says application descriptor could not be found for this application. Try re-installing or contacting the publisher for assistance
    would you please help me.

  • I am trying to open pptx files on my MacBook Pro and continue to get "No Text Converter is installed for this application" even though I have dowloaded several converters that were supposed to work and I just downloaded Apache Open Office 3.4.1

    I am trying to open pptx files on my MacBook Pro and continue to get "No Text Converter is installed for this application" even though I have dowloaded several converters that were supposed to work and I just downloaded Apache Open Office 3.4.1 with no luck.  I am able to open docx files with the converters I have installed but not pptx files.

    The PPTX file type is primarily associated with 'Power Point' by Microsoft Corporation.
    This is the new format for Microsoft Office documents.
    It is a combination of XML architecture and ZIP compression for size reduction.
    To open Office 2008 for Mac documents (format .xlsx, .docx, .pptx) in Office for Mac 2004, you must download and install the Open XML File Format Converter. This article describes how to obtain and install the Open XML File Format Converter for Mac.
    more here:
    http://support.microsoft.com/kb/968200
    Instead of all that, and buying OfficeMac etc...
    Try to see if the FREE LibreOffice suite will open the file on your Mac.
    http://www.libreoffice.org/

  • App-V 5.0 Sequencing Office 2010 - Cannot verify the License for this Application KMS

    Hey Guys,
    i already found some Topics about my Problem, but None of the Solutions i have found, help in my case. I hope someone can help...
    I Sequenced Office 2010 Professional Plus x86 on an App-V 5.0 Sequencer Client (x64) and streamed it to Windows 7 x64 and Windows Server 2012. While i was sequencing, i followed the Articles at
    http://blogs.technet.com/b/office_resource_kit/archive/2011/06/15/sequencing-office-2010-for-app-v-part-1-considerations.aspx and also used the Parameter:
    msiexec/i OffVirt.msi ADDLOCAL=Click2runMapi,Click2runOWSSupp,Click2runWDS,OSpp,OSpp_Core PROPLUS=1
    In the sequencing Process anything ist working fine, i can start Word, Excel... and Office is activated. When i publish the Application and stream to the Client or RDS, i get the Error message in the Screenshot.
    I also tried to create a new Package and type in the KMS Client Key directly to Office, didnt work. In a third Sequencing Process (also new Sequence) i tried with an another Script what i have found: msiexec /i OffVirt.msi PROPLUS=1 KMSSERVICENAME=”SERVERNAME”
    KMSSERVICEPORT=1688
    Please help!!
    Best regards

    I am having this same exact issue; however, I have done everything in the App-V 5.0 Sequencing document, and I have enabled Set-AppVClientConfiguration -EnablePackageScripts 1.
    The sequencer is on a Win 7 32-bit machine, so I used the following:
    msiexec
    /i OffVirt.msi ADDLOCAL=OSpp,OSpp_Core PROPLUS=1
    KMS is registered in DNS, so I shouldn't have to specify KMS.
    As soon as I start Office on a machine, setup screen comes up briefly, and then I see the: 
    "Microsoft Office cannot verify the license for this application. A repair attempt failed or was canceled by the user. The application will now shut down."
    I would use the package accelerator; however, it's a new Pro Plus 2010 build, and it says 12 files are missing from the install (files like the actual OffVirt.msi and manifest files).
    This is getting a little frustrating, as I've already tried the package 4 different times. I also tried this version:
    msiexec/i OffVirt.msi ADDLOCAL=Click2runMapi,Click2runOWSSupp,Click2runWDS,OSpp,OSpp_Core PROPLUS=1
    I am also using the latest SP2 client, Sequencer, and then the AppV 5.0 SP1 server is using the latest hotfix 4 which was released in April 2014.

  • HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

    When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

    It sounds like you are using an application to import. You can do it manually.
    Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

  • Error message - "Overlapping validity areas were found for country BR"

    Hi Experts,
    For a certain output type Y953 (e.g. for the shipment 2002355665 related to the DN 3087912658), an error message "Overlapping validity areas were found for country BR" is coming in as error.
    The error message is appearing during the idoc processing of the shipment.
    This is an incident of Dangerous Goods.
    I would like to know if it is technically / functionally possible to find out as to why exactly this mesage is coming and how can we rectify the problem.
    From technical point of view we checked that this message was not being called in the SAP system but was dynamically called.
    kindly let me know of any breakthrough as this issue is critical as dangerous goods are being transported without needed documents printed.
    Thanks in advance.
    RIttik

    Check whether note 836139 helps you.
    thanks
    G. Lakshmipathi

  • No operand values were found for operand MET_KVAT2C

    Hi,
    I am getting following error while doing billing,
    pls help....
    No operand values were found for operand MET_KVAT2C
    Message no. AJ013
    Diagnosis
    No operand value was found for operand MET_KVAT2C for the period 03.06.2009 -- 24.06.2009.
    Procedure
    Assign a value to the operand in the conditions, rate category facts or installation facts.
    (Note: Additional information regarding this error can be found in the details for this message.)
    Regards,
    Chetan

    Hi Rajesh,
    I Checked the registers , there are 10 register of which 4 for demand.
    Here DEMAND14 is used for taking the readings from the registers and then converting it to the normal operand
    Below is the part of schema :
    DEMAND09     01     MET_KVA          FACTOR100%          MET_KVAT2A
    DEMAND14     01     MET_KVAT2A               MET_KVAT2A
    DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2C
    DEMAND14     01     MET_KVAT2C               MET_KVAT2C
    DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2D
    DEMAND14     01     MET_KVAT2D               MET_KVAT2D
    DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2B
    DEMAND07     01     MET_KVAT2B     MET_KVAT2C          MAX_KVA2
    DEMAND07     01     MAX_KVA2     MET_KVAT2D          MAX_KVA2
    The meter reading results ar maintained. also i maintained MET_KVAT2C value at rate category level. in this case the system found the value but then it is not geting value for  MAX_KVA2.
    I suppose this value should be passed from meter reading.
    Also can you pls tell me what is Assign a value to the operand in the conditions in the error.
    Regards,
    Chetan

  • No operand values were found for operand EQPRICEIN1

    Hi,
    I am getting following error while doing billing,
    plz help....
    No operand values were found for operand EQPRICEIN1
    Message No. AJ013
    Diagnosis
    No operand value was found for operand EQPRICEIN1 for the period 30.04.2015 -- 31.05.2015.
    Procedure
    Assign a value to the operand in the conditions, rate category facts or installation facts.
    (Note: Additional information regarding this error can be found in the details for this message.)

    Hi Kailash,
    You are getting this error because the billing schema is calling variant EQPRICEIN1 for a calculation purpose and it is not being found.
    You need to check at the Installation where this operand is maintained (at the rate, rate category or Installation fact) and maintain a value for the period that is not being found. (30.04.2015 - 31.05.2015).
    Billing after making this update should solve your problem.
    Regards,
    Monis Shakeel

  • RW-20004 no installs found for this host Error when installing Apps tier

    Hello:
    Trying to install 12.1.1 on a linux x64 OS. Following is my current OS Setup:
    1) Have 2 Instances or RHEL 5 Update 4 x64 each named as follows: oalin12db.apps.local & oalin12mt.apps.local
    2) Both have multi user setups as follows:
    a) user: oracle (501), group dba (503)
    b) user: applmgr (502), group dba (503)
    3) Installation of DB node successful for a Vision Instance with SID=VISN
    4) Getting error "RW-20004 no installs found for this host" on apps tier. Does not matter if I use host:SID:port or copy the actual config file over and point rapidwiz to it, I get the same error.
    5) checked everything as per metalink notes 605677.1 and 444870.1.
    6) SELinux on Permissive mode on both instances for now.
    7) Installation stage directory is local to the DB instance and is setup as an nfs mount onto the apps tier.
    Here's how my config_VISN.txt file looks.
    <?xml version="1.0"?>
    <oa_context version="$Revision: 120.5 $">
    <oa_context_name oa_var="s_contextname">config.txt</oa_context_name>
    <oa_context_serial oa_var="s_contextserial">0</oa_context_serial>
    <oa_context_type oa_var="s_contexttype">Config File</oa_context_type>
    <oa_context_file_loc oa_var="s_contextfile">/u01/oracle/VISN/db/tech_st/11.1.0/appsutil/conf_VISN.txt</oa_context_file_loc>
    <ini_file>
    [GENERAL]
    CONFIGURED_ENVS=VISN
    CONFIGURATION_FORMAT=12.0.0
    ACTION_TYPE=INSTALLING
    NUMBER_OF_HOSTS=2
    HOSTNAMES={Server0_oalin12db,Server1_oalin12mt}
    [Server0_oalin12db]
    s_contextname=VISN_oalin12db
    s_dbSid=VISN
    s_dbport=1526
    s_platform=LINUX_X86-64
    s_base_lang=US
    s_env_langs={American_English - US}
    s_allprod={FND}
    s_defterr=AMERICA
    s_domainname=apps.local
    s_isDB=YES
    s_isAdmin=NO
    s_isForms=NO
    s_isConc=NO
    s_isWeb=NO
    s_port_pool=5
    s_dbSidLower=visn
    s_dbuser=oracle
    s_apps_version=12.1.1
    s_dbGlnam=VISN
    s_dbseed=Vision Demo
    s_dbtype=VISION
    s_dbgroup=dba
    s_dbcset=AL32UTF8
    s_base=/u01/oracle/VISN
    s_db_oh=/u01/oracle/VISN/db/tech_st/11.1.0
    s_dbhome1=/u01/oracle/VISN/db/apps_st/data
    s_dbhome2=/u01/oracle/VISN/db/apps_st/data
    s_dbhome3=/u01/oracle/VISN/db/apps_st/data
    s_dbhome4=/u01/oracle/VISN/db/apps_st/data
    s_dbhost=oalin12db
    s_bits=32
    s_db_ons_localport=6300
    s_db_ons_remoteport=6400
    s_cmanport=1521
    [Server1_oalin12mt]
    s_contextname=VISN_oalin12mt
    s_dbSid=VISN
    s_dbport=1526
    s_platform=LINUX_X86-64
    s_base_lang=US
    s_env_langs={American_English - US}
    s_allprod={FND}
    s_defterr=AMERICA
    s_domainname=apps.local
    s_dbdomain=apps.local
    s_isDB=NO
    s_isAdmin=YES
    s_isForms=YES
    s_isConc=YES
    s_isWeb=YES
    s_port_pool=5
    s_formsfndtop=/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0
    s_dbSidLower=visn
    s_dbuser=oracle
    s_apps_version=12.1.1
    s_base=/u01/oracle/VISN
    s_inst_base=/u01/oracle/VISN/inst
    s_config_home=/u01/oracle/VISN/inst/apps/VISN_oalin12mt
    s_at=/u01/oracle/VISN/apps/apps_st/appl
    s_at2=/u01/oracle/VISN/apps/apps_st/appl
    s_at3=/u01/oracle/VISN/apps/apps_st/appl
    s_at4=/u01/oracle/VISN/apps/apps_st/appl
    s_tools_oh=/u01/oracle/VISN/apps/tech_st/10.1.2
    s_weboh_oh=/u01/oracle/VISN/apps/tech_st/10.1.3
    s_com=/u01/oracle/VISN/apps/apps_st/comn
    s_javatop=/u01/oracle/VISN/apps/apps_st/comn/java/classes
    s_temp=/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp
    s_appsuser=applmgr
    s_appsgroup=dba
    s_at_cset=AL32UTF8
    s_iana_cset=UTF-8
    s_display=oalin12mt:0.0
    s_dbhost=oalin12db
    s_admhost=oalin12mt
    s_formshost=oalin12mt
    s_cphost=oalin12mt
    s_webhost=oalin12mt
    s_installedFrom=FS
    s_root_status=enabled
    s_web_entry_status=enabled
    s_web_applications_status=enabled
    s_batch_status=enabled
    s_other_service_group_status=disabled
    s_rpcport=1626
    s_webssl_port=4443
    s_ons_localport=6100
    s_ons_remoteport=6200
    s_ons_requestport=6500
    s_webport=8000
    s_active_webport=8000
    s_formsport=9000
    s_metdataport=9100
    s_metreqport=9200
    s_jtfuf_port=9300
    s_mwaPortNo=10200-10205
    s_mwaTelnetPortNo=10200,10202,10204
    s_mwaDispatcherPort=10800
    s_java_object_cache_port=12345
    s_oacore_jms_portrange=23000-23004
    s_forms_jms_portrange=23500-23504
    s_home_jms_portrange=24000-24004
    s_oafm_jms_portrange=24500-24504
    s_oacore_ajp_portrange=21500-21504
    s_forms_ajp_portrange=22000-22004
    s_home_ajp_portrange=22500-22504
    s_oafm_ajp_portrange=25000-25004
    s_oacore_rmi_portrange=20000-20004
    s_forms_rmi_portrange=20500-20504
    s_home_rmi_portrange=21000-21004
    s_oafm_rmi_portrange=25500-25504
    </ini_file>
    <config_section name="GENERAL">
    <config_pair oa_var="CONFIGURED_ENVS">VISN</config_pair>
    <config_pair oa_var="CONFIGURATION_FORMAT">12.0.0</config_pair>
    <config_pair oa_var="ACTION_TYPE">INSTALLING</config_pair>
    <config_pair oa_var="NUMBER_OF_HOSTS">2</config_pair>
    <config_pair oa_var="HOSTNAMES">{Server0_oalin12db,Server1_oalin12mt}</config_pair>
    </config_section>
    <config_section name="Server0_oalin12db">
    <config_pair oa_var="s_contextname">VISN_oalin12db</config_pair>
    <config_pair oa_var="s_dbSid">VISN</config_pair>
    <config_pair oa_var="s_dbport">1526</config_pair>
    <config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
    <config_pair oa_var="s_base_lang">US</config_pair>
    <config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
    <config_pair oa_var="s_allprod">{FND}</config_pair>
    <config_pair oa_var="s_defterr">AMERICA</config_pair>
    <config_pair oa_var="s_domainname">apps.local</config_pair>
    <config_pair oa_var="s_isDB">YES</config_pair>
    <config_pair oa_var="s_isAdmin">NO</config_pair>
    <config_pair oa_var="s_isForms">NO</config_pair>
    <config_pair oa_var="s_isConc">NO</config_pair>
    <config_pair oa_var="s_isWeb">NO</config_pair>
    <config_pair oa_var="s_port_pool">5</config_pair>
    <config_pair oa_var="s_dbSidLower">visn</config_pair>
    <config_pair oa_var="s_dbuser">oracle</config_pair>
    <config_pair oa_var="s_apps_version">12.1.1</config_pair>
    <config_pair oa_var="s_dbGlnam">VISN</config_pair>
    <config_pair oa_var="s_dbseed">Vision Demo</config_pair>
    <config_pair oa_var="s_dbtype">VISION</config_pair>
    <config_pair oa_var="s_dbgroup">dba</config_pair>
    <config_pair oa_var="s_dbcset">AL32UTF8</config_pair>
    <config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
    <config_pair oa_var="s_db_oh">/u01/oracle/VISN/db/tech_st/11.1.0</config_pair>
    <config_pair oa_var="s_dbhome1">/u01/oracle/VISN/db/apps_st/data</config_pair>
    <config_pair oa_var="s_dbhome2">/u01/oracle/VISN/db/apps_st/data</config_pair>
    <config_pair oa_var="s_dbhome3">/u01/oracle/VISN/db/apps_st/data</config_pair>
    <config_pair oa_var="s_dbhome4">/u01/oracle/VISN/db/apps_st/data</config_pair>
    <config_pair oa_var="s_dbhost">oalin12db</config_pair>
    <config_pair oa_var="s_bits">32</config_pair>
    <config_pair oa_var="s_db_ons_localport">6300</config_pair>
    <config_pair oa_var="s_db_ons_remoteport">6400</config_pair>
    <config_pair oa_var="s_cmanport">1521</config_pair>
    </config_section>
    <config_section name="Server1_oalin12mt">
    <config_pair oa_var="s_contextname">VISN_oalin12mt</config_pair>
    <config_pair oa_var="s_dbSid">VISN</config_pair>
    <config_pair oa_var="s_dbport">1526</config_pair>
    <config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
    <config_pair oa_var="s_base_lang">US</config_pair>
    <config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
    <config_pair oa_var="s_allprod">{FND}</config_pair>
    <config_pair oa_var="s_defterr">AMERICA</config_pair>
    <config_pair oa_var="s_domainname">apps.local</config_pair>
    <config_pair oa_var="s_dbdomain">apps.local</config_pair>
    <config_pair oa_var="s_isDB">NO</config_pair>
    <config_pair oa_var="s_isAdmin">YES</config_pair>
    <config_pair oa_var="s_isForms">YES</config_pair>
    <config_pair oa_var="s_isConc">YES</config_pair>
    <config_pair oa_var="s_isWeb">YES</config_pair>
    <config_pair oa_var="s_port_pool">5</config_pair>
    <config_pair oa_var="s_formsfndtop">/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0</config_pair>
    <config_pair oa_var="s_dbSidLower">visn</config_pair>
    <config_pair oa_var="s_dbuser">oracle</config_pair>
    <config_pair oa_var="s_apps_version">12.1.1</config_pair>
    <config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
    <config_pair oa_var="s_inst_base">/u01/oracle/VISN/inst</config_pair>
    <config_pair oa_var="s_config_home">/u01/oracle/VISN/inst/apps/VISN_oalin12mt</config_pair>
    <config_pair oa_var="s_at">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
    <config_pair oa_var="s_at2">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
    <config_pair oa_var="s_at3">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
    <config_pair oa_var="s_at4">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
    <config_pair oa_var="s_tools_oh">/u01/oracle/VISN/apps/tech_st/10.1.2</config_pair>
    <config_pair oa_var="s_weboh_oh">/u01/oracle/VISN/apps/tech_st/10.1.3</config_pair>
    <config_pair oa_var="s_com">/u01/oracle/VISN/apps/apps_st/comn</config_pair>
    <config_pair oa_var="s_javatop">/u01/oracle/VISN/apps/apps_st/comn/java/classes</config_pair>
    <config_pair oa_var="s_temp">/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp</config_pair>
    <config_pair oa_var="s_appsuser">applmgr</config_pair>
    <config_pair oa_var="s_appsgroup">dba</config_pair>
    <config_pair oa_var="s_at_cset">AL32UTF8</config_pair>
    <config_pair oa_var="s_iana_cset">UTF-8</config_pair>
    <config_pair oa_var="s_display">oalin12mt:0.0</config_pair>
    <config_pair oa_var="s_dbhost">oalin12db</config_pair>
    <config_pair oa_var="s_admhost">oalin12mt</config_pair>
    <config_pair oa_var="s_formshost">oalin12mt</config_pair>
    <config_pair oa_var="s_cphost">oalin12mt</config_pair>
    <config_pair oa_var="s_webhost">oalin12mt</config_pair>
    <config_pair oa_var="s_installedFrom">FS</config_pair>
    <config_pair oa_var="s_root_status">enabled</config_pair>
    <config_pair oa_var="s_web_entry_status">enabled</config_pair>
    <config_pair oa_var="s_web_applications_status">enabled</config_pair>
    <config_pair oa_var="s_batch_status">enabled</config_pair>
    <config_pair oa_var="s_other_service_group_status">disabled</config_pair>
    <config_pair oa_var="s_rpcport">1626</config_pair>
    <config_pair oa_var="s_webssl_port">4443</config_pair>
    <config_pair oa_var="s_ons_localport">6100</config_pair>
    <config_pair oa_var="s_ons_remoteport">6200</config_pair>
    <config_pair oa_var="s_ons_requestport">6500</config_pair>
    <config_pair oa_var="s_webport">8000</config_pair>
    <config_pair oa_var="s_active_webport">8000</config_pair>
    <config_pair oa_var="s_formsport">9000</config_pair>
    <config_pair oa_var="s_metdataport">9100</config_pair>
    <config_pair oa_var="s_metreqport">9200</config_pair>
    <config_pair oa_var="s_jtfuf_port">9300</config_pair>
    <config_pair oa_var="s_mwaPortNo">10200-10205</config_pair>
    <config_pair oa_var="s_mwaTelnetPortNo">10200,10202,10204</config_pair>
    <config_pair oa_var="s_mwaDispatcherPort">10800</config_pair>
    <config_pair oa_var="s_java_object_cache_port">12345</config_pair>
    <config_pair oa_var="s_oacore_jms_portrange">23000-23004</config_pair>
    <config_pair oa_var="s_forms_jms_portrange">23500-23504</config_pair>
    <config_pair oa_var="s_home_jms_portrange">24000-24004</config_pair>
    <config_pair oa_var="s_oafm_jms_portrange">24500-24504</config_pair>
    <config_pair oa_var="s_oacore_ajp_portrange">21500-21504</config_pair>
    <config_pair oa_var="s_forms_ajp_portrange">22000-22004</config_pair>
    <config_pair oa_var="s_home_ajp_portrange">22500-22504</config_pair>
    <config_pair oa_var="s_oafm_ajp_portrange">25000-25004</config_pair>
    <config_pair oa_var="s_oacore_rmi_portrange">20000-20004</config_pair>
    <config_pair oa_var="s_forms_rmi_portrange">20500-20504</config_pair>
    <config_pair oa_var="s_home_rmi_portrange">21000-21004</config_pair>
    <config_pair oa_var="s_oafm_rmi_portrange">25500-25504</config_pair>
    </config_section>
    </oa_context>

    Here's the log:
    Oracle Applications Rapid Install Wizard Install log
    >> Using Rapid Wizard Version : 12.1.1.9
    >> Install session started : Thu Nov 05 11:10:16 EST 2009
    >> Rapid Wizard source location : /u02/apps/StageR12/startCD/Disk1/rapidwiz
    >> Command Line arguments for this run :
    =================================================================
    Install Session Information
    Host Name : oalin12mt.apps.local
    Host Operating System : Linux x86-64 (64-bit)
    User running Install : root
    =================================================================
    InstUpgPanel
         User action : Install Oracle Applications
         Install type : Standard Install
    Disabling OCM Configuration
    InstallPanel
         User action : Load configuration
         Description : Loads an already existing configuration.
              Setting temp directory to: /u02/apps
    Reading configuration from: /u02/apps/conf_VISN.txt
    Reading config file for oalin12db at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 1 oracle.apps.ad.util.PortPool@16b9e62
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 2 oracle.apps.ad.util.PortPool@1694eca
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OCM saved values exist: oalin12mt
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
    InstallPanel
         User action : Load configuration
         Description : Loads an already existing configuration.
              Setting temp directory to: /u02/apps
    Reading configuration from: /u02/apps/conf_VISN.txt
    Reading config file for oalin12db at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 1 oracle.apps.ad.util.PortPool@170984c
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 2 oracle.apps.ad.util.PortPool@1c220eb
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OCM saved values exist: oalin12mt
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
    InstallPanel
         User action : Load configuration
         Description : Loads an already existing configuration.
              Setting temp directory to: /u02/apps
    Reading configuration from: /u02/apps/conf_VISN.txt
    Reading config file for oalin12db at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 1 oracle.apps.ad.util.PortPool@b41166
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 2 oracle.apps.ad.util.PortPool@103d246
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OCM saved values exist: oalin12mt
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
    InstallPanel
         User action : Load configuration
         Description : Loads an already existing configuration.
              Setting temp directory to: /u02/apps
    Reading configuration from: /u02/apps/conf_VISN.txt
    Reading config file for oalin12db at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 1 oracle.apps.ad.util.PortPool@19c9f16
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 2 oracle.apps.ad.util.PortPool@1e7d503
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OCM saved values exist: oalin12mt
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
    InstallPanel
         User action : Load configuration
         Description : Loads an already existing configuration.
              Setting temp directory to: /u02/apps
    Reading configuration from: /u02/apps/conf_VISN.txt
    Reading config file for oalin12db at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 1 oracle.apps.ad.util.PortPool@287b58
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 2 oracle.apps.ad.util.PortPool@95c5ec
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OCM saved values exist: oalin12mt
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
    InstallPanel
         User action : Load configuration
         Description : Loads an already existing configuration.
              Setting temp directory to: /u02/apps
    Reading configuration from: /u02/apps/conf_VISN.txt
    Reading config file for oalin12db at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 1 oracle.apps.ad.util.PortPool@1f89785
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    instantiate file:
    source : /tmp/tmpoalin12db_VISN_db.xml
    dest : /tmp/tmpoalin12db_VISN_db.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
    SID set to: VISN
    OS set to: LINUX_X86-64
    Loading context... null 2 oracle.apps.ad.util.PortPool@109dcbb
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    setOCMValues : IN
    setOCMValues : OCM saved values exist: oalin12db
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OCM saved values exist: oalin12mt
    setOCMValues : s_metalink_id -
    setOCMValues : s_mysupport_pwd -
    setOCMValues : OUT
    instantiate file:
    source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    instantiate file:
    source : /tmp/tmpoalin12mt_VISN_apps.xml
    dest : /tmp/tmpoalin12mt_VISN_apps.xml
    Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml

  • HT201302 I have a 4S Iphone and wish to transfer my photoes to my Windows 7 PC, but It wont work. I go to "computer" click on "import pictures and videos" but a window opens stating " No pictures or videos were found on this device". Need your help please

    Just to add that my iphone is connected to my PC, the "Autoplay" box is seen, but again when I click on "import pictures and videos, using Windows" a window opens saying "No pictures or videos were found on this device".

    Thank you Peter, I had already tried this link before asking for help. I followed the steps, and when I clicked on " import pictures and videos " , a window poped up saying " No pictures or videos were found on this device". Any helps !

  • HT201302 What if I get a message "No photos or videos were found on this device" though I know there are hundreds of photos on my iphone?

    I have hundreds of photos that I have taken using the Camera and Camera + apps on my iphone 4S, and am now trying to copy those photos on to my Thinkpad PC (Windows 7).  But I get a messge "No photos or videos were found on this device".  Not sure what I am need to do to copy the photos.  Appreciate any help.
    Thanks.

    It sounds like you are using an application to import. You can do it manually.
    Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

  • Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

    We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues.  We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
    throw the following error:
    'Microsoft Office can't find your license for this application.  Microsoft Office will now exit.'
    We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
    It appears to be an issue with the Software Protection service not starting properly.  In Event Viewer, we see the following:
    'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
    Event 7000'
    This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates.  It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
    different workstations.  Office repairs have also been unsuccessful.  
    Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing?  Maybe an Office update in the last 2-3 months?
    Thanks for any info.

    We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues.  We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
    throw the following error:
    'Microsoft Office can't find your license for this application.  Microsoft Office will now exit.'
    We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
    It appears to be an issue with the Software Protection service not starting properly.  In Event Viewer, we see the following:
    'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
    Event 7000'
    This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates.  It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
    different workstations.  Office repairs have also been unsuccessful.  
    Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing?  Maybe an Office update in the last 2-3 months?
    Thanks for any info.

  • Help! "The iTunes application could not be opened. You do not have enough access privileges for this application"

    I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confused as to why this would start happening all of the sudden.
    I poked around in the control panel trying to find random options that would fix it, but nothing has. I'm running Windows 7.
    Thanks for any help!

    have you seen this discussion ?

  • In service order Issu:No account assignment found for this service process

    Issue:No account assignment found for this service process
    An error has occurred in the system RT1400LS while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
    While we created the service order as a fallow up document of the quotation system unable to create the PR. System showing the above error in the service order.
    We created the service order with same items directly not as fallow up document to quotation PR created with out any fail.
    As per my analyses above error because system unable to find out the Internal order to create the PR hence we created service order as a fallow up document of the service quotation.
    Revert require data to understand the issue more.
    Best Regards,
    Prakesh

     Dear Gurus,
    Thanks for your update. we checked as per your suggestion but the issue is PR is not determining the IO while creating the PR.
    We used the different item cat in quotation and service order system generating the PR, But our Clint want to use the same item cat in the both service order and quotation.
    If we created the quotation after that service order with the service line item and spare part line item system creating the IO (internal order) but PR not generating.
    Please help me in this scenario what should we do.
    Best Regards,
    Prakesh.

  • The folio for this application is missing resources

    Hi,
    In the Folio Builder I am able to build the application using the "Create App..." menu.
    When I'm trying to download the successfully built application from the DPS App Builder it says:
    "The folio for this application is missing resources. To resolve this issue, delete the folio and create a new one using Folio Builder Panel, then try building your application again."
    Thank you for your answer!
    vp

    Hello,
    I have the same problem and I have no idea how to solve it.
    When I'm trying to download the App for testing on ipad I get the message:
    Then I try to resolve this issue following instruction above and I still get the same message.
    vokopeti wrote:
    I've called Adobe Gold Support and the answer was it is not possible to create application with the folio builder throught the network anymore. We have to build the applications on the local mashine in the future.
    Following this tip I created my folio offline and then I uploaded to the folio producer and it worked.
    I was able to download both developper and distribution app.

Maybe you are looking for

  • Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs

    Hi Team I want the SQl query to get the data for the following comparison : - Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours i.e. (SYSDATE-1) 18:00:00 < Order.Created < SYSDA

  • RG1 Simulation issue

    Dear All, While updating RG1 register, I selected the line items to update and click on "Simulate" button, traffice light turned to "Red". Actually, mine is a Stock Transport Order. I have created a delivery based on a P.O and a Proforma invoice base

  • Pics in a Jar File

    Hi everybody, if I display a picture in an applet running in a browser , then I use dataUrl to get the pictures without a security exception. My question is: Can I put the picture in a jar file, the same where the applet is, and then open the picture

  • Timeline behavior when inserting a clip

    I've got a timeline built, but it's sort of a draft. I'll replace some clips with others, delete some, insert some. Problem is, when I'm inserting a new clip, it would make my life so much easier if the rest of the clips in the timeline would move ou

  • Discoverer and Compaq Tru64

    I need to know whether or not Discoverer will run on Compaq Tru64. I heard that Oracle9iAS Discoverer Plus and Viewer simply does not run on Compaq Tru64! That this is because Compaq and Inprise, who develops the Visibroker component,can't agree on t