EJB-Security client identification

I want to be able to distinguish between different clients possibly running with
the same client user IDs. The distinction has to be on the server side e.g. based
on the client's IP address.
Is it possible to get the client's IP address on the server side? I don't want
to use stateful session beans as this will simply create lots of instances without
really using them that much.
Thanks
Chetan

The IP address can be obtained from the HTTP headers. Check all the headers in the
HTTPServletRequest using getHeaders() functions. One of them is the IP address
Chetan Gadgil wrote:
Don't want the hassle of managing too many user IDs.
In addition to that though IP addresses can be spoofed and networks can be hacked
into, this is not the problem we are trying to solve. The access has to be controlled
at the user level, with multiple persons possibly sharing some of the user IDs.
Even if we have only ONE user per login, we still want to identify the source
IP for a request.
Does anyone know HOW to do it?
Thanks
Chetan
"Alf" <alf> wrote:
Relying on the IP address is very unreliable and not very secure, either.
Regarding the former:
- different clients may come through the same proxy (thus from the same
IP
as far as the server is concerned)
- the same client can come through different IPs even within the same
session. This happens when they use a large ISP and the dynamic load
balancing of the ISP routes the client through different proxies.
Regarding the latter, in certain conditions IP addresses can be spoofed
(and
the subject is too big to discuss it here).
The problem, however, is rather at the business level. To have different
clients using the same userid but still required to be distinguished
from one another should rather be resolved by assigning different usernames
to those clients. This is what usernames are meant for . Groups can be
used
to assign permissions on a global basis, but if you need user-level
granularity, then really have different usernames.
hope this helps.
"Chetan Gadgil" <[email protected]> wrote in message
news:[email protected]...
I want to be able to distinguish between different clients possiblyrunning with
the same client user IDs. The distinction has to be on the server sidee.g. based
on the client's IP address.
Is it possible to get the client's IP address on the server side? Idon't
want
to use stateful session beans as this will simply create lots of instanceswithout
really using them that much.
Thanks
Chetan

Similar Messages

Create a Secure Client for a Secure Web Service- is failing

Hi,
This is actually with reference to the webservice tutorial.I am trying the example on Create a Secure Client for a Secure Web Service and have followed all the steps mentioned,however I am getting the following error:
D:\JDev11gTp\jdk\bin\javaw.exe -client -classpath D:\Jdev11gTpInstance\mywork\WebServiceApplications\.adf;D:\Jdev11gTpInstance\mywork\WebServiceApplications\WebServiceProjects\classes;D:\JDev11gTp\webservices\lib\jaxws-api.jar;D:\JDev11gTp\webservices\lib\jws-api.jar;D:\JDev11gTp\webservices\lib\orawsmetadata.jar;D:\JDev11gTp\webservices\lib\wsclient.jar;D:\JDev11gTp\j2ee\home\lib\activation.jar;D:\JDev11gTp\j2ee\home\lib\ejb.jar;D:\JDev11gTp\j2ee\home\lib\jms.jar;D:\JDev11gTp\j2ee\home\lib\jta.jar;D:\JDev11gTp\j2ee\home\lib\mail.jar;D:\JDev11gTp\j2ee\home\lib\servlet.jar;D:\JDev11gTp\webservices\lib\jaxrpc-api.jar;D:\JDev11gTp\webservices\lib\wsserver.jar;D:\JDev11gTp\webservices\lib\wssecurity.jar;D:\JDev11gTp\webservices\lib\wsdl.jar;D:\JDev11gTp\webservices\lib\orasaaj.jar;D:\JDev11gTp\webservices\lib\saaj-api.jar;D:\JDev11gTp\webservices\lib\orawsdl.jar;D:\JDev11gTp\webservices\lib\orawsrm.jar;D:\JDev11gTp\webservices\lib\orawsrel.jar;D:\JDev11gTp\webservices\lib\jaxr-api.jar;D:\JDev11gTp\webservices\lib\orajaxr.jar;D:\JDev11gTp\webservices\lib\relaxngDatatype.jar;D:\JDev11gTp\webservices\lib\xsdlib.jar;D:\JDev11gTp\webservices\lib\mdds.jar;D:\JDev11gTp\webservices\lib\wsif.jar;D:\JDev11gTp\webservices\lib\fabric-common.jar;D:\JDev11gTp\webservices\lib\fabric-interceptors.jar;D:\JDev11gTp\jlib\jaxen.jar;D:\JDev11gTp\jlib\oraclepki.jar;D:\JDev11gTp\jlib\ojpse.jar;D:\JDev11gTp\jlib\jsr106.jar;D:\JDev11gTp\jlib\jsr105.jar;D:\JDev11gTp\jlib\osdt_xmlsec_jce.jar;D:\JDev11gTp\jlib\osdt_wss_jce.jar;D:\JDev11gTp\jlib\osdt_saml_jce.jar;D:\JDev11gTp\jlib\osdt_saml2_jce.jar;D:\JDev11gTp\jlib\osdt_core.jar;D:\JDev11gTp\jlib\osdt_cert.jar;D:\JDev11gTp\jlib\osdt_xmlsec.jar;D:\JDev11gTp\jlib\osdt_wss.jar;D:\JDev11gTp\jlib\osdt_saml.jar;D:\JDev11gTp\jlib\osdt_saml2.jar;D:\JDev11gTp\jlib\ojmisc.jar;D:\JDev11gTp\j2ee\home\lib\http_client.jar;D:\JDev11gTp\j2ee\home\jazncore.jar;D:\JDev11gTp\j2ee\home\oc4jclient.jar;D:\JDev11gTp\rdbms\jlib\xdb.jar;D:\JDev11gTp\j2ee\home\lib\javax77.jar;D:\JDev11gTp\lib\java\api\jsr173_api.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar;D:\JDev11gTp\j2ee\home\lib\oc4j-schemas.jar;D:\JDev11gTp\jlib\ojdl.jar;D:\JDev11gTp\jlib\ojdl2.jar;D:\JDev11gTp\jlib\fmw_audit.jar;D:\JDev11gTp\j2ee\home\lib\jmxri.jar;D:\JDev11gTp\j2ee\home\lib\jmx_remote_api.jar;D:\JDev11gTp\j2ee\home\lib\adminclient.jar;D:\JDev11gTp\j2ee\home\lib\jmxframework.jar;D:\JDev11gTp\j2ee\home\lib\jmxspi.jar;D:\JDev11gTp\j2ee\home\lib\xmlcfg.jar;D:\JDev11gTp\jlib\dms.jar;D:\JDev11gTp\jlib\orai18n.jar;D:\JDev11gTp\j2ee\home\lib\commons-digester.jar;D:\JDev11gTp\j2ee\home\lib\spring.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-policy-core.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pmclient.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pap.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-agent.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-secpol.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javamodel-rt.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javatools-nodeps.jar;D:\JDev11gTp\lib\java\shared\oracle.toplink\11.1.1.0.0\toplink-sdo.jar;D:\JDev11gTp\lib\java\api\jaxb-api.jar;D:\JDev11gTp\lib\xmlparserv2.jar;D:\JDev11gTp\lib\xml.jar;D:\JDev11gTp\jakarta-taglibs\commons-logging-1.0.3\commons-logging.jar -Dhttp.proxyHost=localhost -Dhttp.proxyPort=8099 -Dhttp.nonProxyHosts= -Dhttps.proxyHost=localhost -Dhttps.proxyPort=8099 -Dhttps.nonProxyHosts= HelloPolicyPortClient
Feb 1, 2008 5:13:43 PM oracle.j2ee.ws.common.context.ContextInterceptor init
INFO: Context provider properties file not found
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-AGENT busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-AGENT filter=false auditor=oracle.security.audit.Auditor@143a083
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-PM-LIB busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-PM-LIB filter=false auditor=oracle.security.audit.Auditor@15af049
SEVERE: WSM-04514 An MDS error occurred.
SEVERE: WSM-09012 No key, WSM-06002, was found in the resource bundle oracle.wsm.resources.policyvalidation.PolicyValidationMessageBundle.
javax.xml.ws.WebServiceException: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:466)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:204)
at $Proxy28.sayHello(Unknown Source)
at HelloPolicyPortClient.main(HelloPolicyPortClient.java:35)
Caused by: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.integration.platform.common.InterceptorChainImpl.createPolicyEnforcementException(InterceptorChainImpl.java:217)
at oracle.integration.platform.common.InterceptorChainImpl.processRequest(InterceptorChainImpl.java:104)
at oracle.j2ee.ws.client.mgmt.runtime.SuperClientInterceptorPipeline.handleRequest(SuperClientInterceptorPipeline.java:91)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:309)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:290)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:444)
... 3 more
Process exited with exit code 0.
Can anyone please give any clue as to why this error is coming?
Thanks.

Hi
Please refer to this thread
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

EJB security

Hello !
I read that controlled access to EJB methods can be achieved by mean of defining security roles (in the EJB deployment descriptors). I also read that each time an EJB method is called, the EJB client's Principal is forwarded to the EJB context. What I dont't know is how to establish a link between the client's principal and EBJ security roles ? I guess it should be possible. If not how should the method isCallerInRole work ? Can anyone help me ?
Pascal.

The primary concept for EJB security is that of "roles"
A user may be in one or more roles. It is only roles that have particular access rights, not users. So for instance, the "administrator" role might have certain access right, that the "client" roles might not. If a user is switched from being a "client" to an "administrator" (or is given both roles), that user will then have access to all the methods accessible to the "administrator" role.
Each method can be restricted based upon roles. The restrictions are listed in the <assembly-descriptor> tag. First of all, all roles must be listed. Then for each method, the access rights are listed by role. An example is shown below:
<assembly-descriptor>
<security-role>
<role-name>administrator</role-name>
</security-role>
<security-role>
<role-name>client</role-name>
</security-role>
<method-permission>
<role-name>administrator</role-name>
<role-name>client</role-name>
<method>
<ejb-name>StockQuotes</ejb-name>
<method-name>buy</method-name>
</method>
<method>
<ejb-name>StockQuotes</ejb-name>
<method-name>getPrice</method-name>
</method>
</method-permission>
</assembly-descriptor>
Each method-permission tag may list one or more role names, followed by one or more methods that are accessible for that role. The "*" character may be used to specify method names (indicating all methods.) For multiple methods with the same name, the EJB specifications allow detailed parameter lists and interface type to identify methods uniquely, but this is outsie the scope of this tutorial -- check reference material if you need to do this.
The actual mapping from user names to security roles, and the specification of user names and passwords is application-server dependent.
Hope this helps

Problem mapping LoginModule roles to ejb security roles

I have "successfully" managed to implement the DBSystemLoginModule. When I run my application I successfully authenticate to the database, the login module successfully retrieves the users roles from the database and adds them to the subject:
PassiveCallbackHandler cbh = new PassiveCallbackHandler(username, password);
LoginContext lc = new LoginContext("current-workspace-app", cbh);
lc.login();
I then perform a lookup on a bean using the same user:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
env.put("java.naming.security.principal",username);
env.put("java.naming.security.credentials",password);
env.put("java.naming.provider.url", "ormi://localhost:23891/current-workspace-app");
Context ic = new InitialContext(env);
final SessionEJBHome sessionEJBHome =
(SessionEJBHome) PortableRemoteObject.narrow( ic.lookup( "SessionEJB" ), SessionEJBHome.class );
Finally, I create an instance of the bean and call a method of this bean.
SessionEJB sessionEJB;
sessionEJB = sessionEJBHome.create( );
sessionEJB.testMe( );
I am expecting (hoping) that the roles retrieved from the database by the login module may be used to authenticate the ejb methods. i.e. if (in ejb-jar.xml) the method "testMe" has a method-permission with role-name of "ABC" then this method may only be accessed if the user is a member of the "ABC" role retrieved from the database by the login module. However I get the message:
"username is not allowed to call this EJB method"
When I add a security-role-mapping in orion-ejb-jar.xml mapping the role "ABC" to the group "ABC" (and impliesALL="true") then the method is called successfully. However, if I add a security-role-mapping mapping the role "DEF" to the group "DEF" (which the user is not a member of) the ejb method is (wrongly) called successfully (with implies all="false" the method always fails). In other words there seems to be no mapping of the roles retrieved by the login module to the ejb security roles.
Can anyone please enlighten me on how I can achieve the mapping of the ejb security roles to the roles obtained from the login module.
Thanks
PS I have this problem with JDeveloper 10.1.3 (Developer Preview 10.1.3.0.2.223 and Early Access 10.1.3.0.3.3412)

Hi Sebastian,
yes, it is possible to do such mapping. And here how it works:
1. define security roles in the ejb-jar.xml within the <security-role>. For example:
<security-role>
     <role-name>test</role-name>
</security-role>
2. then you map the roles those roles to server security roles using the <security-role-map> tag of the ejb-j2ee-engine.xml descriptor.
<security-permission>
   <security-role-map>
      <role-name>test</role-name>
      <server-role-name>myUMErole</server-role-name>
   </security-role-map>
</security-permission>
the myUMErole must be defined in the UME!
Does this answer your question?

HP Security client (HP Drive encryption)

Hi.
Today i try to use software in stock "HP ProOne400" and have some truble!
1. Im change the name of user PC (from Administrator => Admin)
2. Rebot PC
2. Run software HP Security client
- set password for username "Admin" in tool
- the step with secret questions skipped
- then i insert USB storage to create a secret recovery key for encryption.
3. Then the tool tell me "PC need reboot"
After rebbot i see next situatioon
- Bios load
4. Load HP Drive encription
Username "Administrator"
in the center of the screen the message "enter the password"
4.1 I type passwor, push "login button" - Error (wrong password)
All attempts unsuccessfully
5. Then i decide to try Recovery with "DiskDescription security key"
5.1 i choise this metod, the i see on the screen
top - the band with a place for security key file
below, there are two folders.
I inserted into the computer usb storage, which was previously stored key file.
However, the system does not recognize anything, and I can not select anything.
get even with the decryption key, I can not use it.
Tell me what you can do to work correctly?

I checked 'Disable Sleep Mode for increased security' and then it allowed me to deselect my boot drive and is now decrypting... odd... any idea why that would make the difference?

Using the Audit Provider to log ejb security events

I would like use the audit provider to log security events for ejbs that use container managed security. Specifically I want to record the name of the ejb being accessed, the method the user is accessing, the time of the event and the user name of the user who is accessing the ejb.So far I have created an ejb that has method-permissions defined in the ejb-xml file. I have a number of users with different levels of permissions and the security is working.I have also installed the example Audit class that is shipped with weblogic.I am getting Audit indo in the log file, but I do not get any ejb info being logged.Is it possible to use the Audit provider that weblogic provides to audit ejb security events? Do I need to do something special to make this work?Please help, I can not find any documentation about what the audit provider logs.

Actually I never tried to login into the provider, but I understand you just need the keys.
Try this code, it works for me (some pieces are missing, but this is the core)
        Provider provider=null;
     provider=new SunPKCS11(providerFile);   // providerFile is a String
     Security.addProvider(provider);
     KeyStore store=KeyStore.getInstance("PKCS11");
        char[] pin=pinAsString.toCharArray();
     store.load(null, pin);
        PrivateKey key=(PrivateKey)store.getKey(alias, null);
        Certificate[] chain=store.getCertificateChain(alias);
        .....Using this approach I managed to read all the information from the provider (aliases, certificates, ...). I'm not sure that's what you needed, but I hope it helped.

Wl5.1 ejb security checking is backwards

In 5.1 for ejb security checking you seem to check for users first,
then groups.
ie:
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:1057)
at
weblogic.ejb.internal.SecurityRoleMapping.lookupPrincipal(SecurityRoleeMapping.java:236)
I dont have a code, but from the stack I can see you first calling
getUser, if its null, then calling getGroup.
I think in 4.51 you checked groups first (I dont have the stack since
its long gone, but I didnt have the sql im getting generated in 4.5.1).
Since most people map ejbs to groups (mapping directly to users is
inflexible), I think it would make sense from a performance perspective
to check groups first, then look for users.
Also, for compatibility sake, I would think such a change should be
noted in the release notes.
let me know if you agree, Ill open a case with support.
-Joel

In 5.1 for ejb security checking you seem to check for users first,
then groups.
ie:
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:1057)
at
weblogic.ejb.internal.SecurityRoleMapping.lookupPrincipal(SecurityRoleeMapping.java:236)
I dont have a code, but from the stack I can see you first calling
getUser, if its null, then calling getGroup.
I think in 4.51 you checked groups first (I dont have the stack since
its long gone, but I didnt have the sql im getting generated in 4.5.1).
Since most people map ejbs to groups (mapping directly to users is
inflexible), I think it would make sense from a performance perspective
to check groups first, then look for users.
Also, for compatibility sake, I would think such a change should be
noted in the release notes.
let me know if you agree, Ill open a case with support.
-Joel

The installer has encountered an unexpected error installing this package F-Secure Client Security

Hello there : whe just buy a T61 after windows xp finish install i try to install F-Secure Client Security and the install fails i log the following : i try almost everything , can some one help?
MSI (c) (D4:10) [14:19:03:929]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
=== Logging started: 21-08-2008 14:19:03 ===
Action start 14:19:03: INSTALL.
Action start 14:19:03: LaunchConditions.
Action ended 14:19:03: LaunchConditions. Return value 1.
Action start 14:19:03: PrepareDlg.
Info 2898. DlgFont8, Tahoma, 1
Info 2898. VerdanaBold13, Verdana, 1
DEBUG: Error 2826: Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
Action ended 14:19:04: PrepareDlg. Return value 1.
Action start 14:19:04: FindRelatedProducts.
Action ended 14:19:04: FindRelatedProducts. Return value 1.
Action start 14:19:04: AppSearch.
Action ended 14:19:04: AppSearch. Return value 1.
Action start 14:19:04: CCPSearch.
Action ended 14:19:04: CCPSearch. Return value 1.
Action start 14:19:04: RMCCPSearch.
Action ended 14:19:04: RMCCPSearch. Return value 0.
Action start 14:19:04: ValidateProductID.
Action ended 14:19:04: ValidateProductID. Return value 1.
Action start 14:19:04: CostInitialize.
MSI (c) (D4:10) [14:19:04:049]: Baseline: Sorting baselines for {B5DF29E9-885D-4FD0-B62D-33615AC65A53}.
MSI (c) (D4:10) [14:19:04:049]: Baseline: New baseline 7.11.0 from transaction.
MSI (c) (D4:10) [14:19:04:049]: Baseline: Sorted order Native: Order 0.
MSI (c) (D4:10) [14:19:04:049]: Baseline Data Table:
MSI (c) (D4:10) [14:19:04:049]: ProductCode: {B5DF29E9-885D-4FD0-B62D-33615AC65A53} Version: 7.11.0 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (c) (D4:10) [14:19:04:049]: Baseline File Table:
Action ended 14:19:04: CostInitialize. Return value 1.
Action start 14:19:04: FileCost.
Action ended 14:19:04: FileCost. Return value 1.
Action start 14:19:04: IsolateComponents.
Action ended 14:19:04: IsolateComponents. Return value 1.
Action start 14:19:04: CostFinalize.
Action ended 14:19:04: CostFinalize. Return value 1.
Action start 14:19:04: MigrateFeatureStates.
Action ended 14:19:04: MigrateFeatureStates. Return value 0.
Action start 14:19:04: WelcomeDlg.
DEBUG: Error 2826: Control BottomLine on dialog WelcomeDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: WelcomeDlg, BottomLine, to the right
Info 2898. DlgFontBold8, Tahoma, 1
DEBUG: Error 2826: Control BannerBitmap on dialog VerifyReadyDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: VerifyReadyDlg, BannerBitmap, to the right
DEBUG: Error 2826: Control BottomLine on dialog VerifyReadyDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: VerifyReadyDlg, BottomLine, to the right
DEBUG: Error 2826: Control BannerLine on dialog VerifyReadyDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: VerifyReadyDlg, BannerLine, to the right
Action ended 14:19:05: WelcomeDlg. Return value 1.
Action start 14:19:05: ProgressDlg.
DEBUG: Error 2826: Control BannerBitmap on dialog ProgressDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ProgressDlg, BannerBitmap, to the right
DEBUG: Error 2826: Control BottomLine on dialog ProgressDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ProgressDlg, BottomLine, to the right
DEBUG: Error 2826: Control BannerLine on dialog ProgressDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ProgressDlg, BannerLine, to the right
Action ended 14:19:06: ProgressDlg. Return value 1.
FE7CFB0F8FC9EE44190B518848DC785C
MSI (s) (64:9C) [14:19:22:948]: Using cached product context: machine assigned for product: FE7CFB0F8FC9EE44190B518848DC785C
MSI (s) (64:9C) [14:19:24:572]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
Action start 14:19:24: INSTALL.
Action start 14:19:24: LaunchConditions.
Action ended 14:19:24: LaunchConditions. Return value 1.
Action start 14:19:24: FindRelatedProducts.
Action ended 14:19:24: FindRelatedProducts. Return value 0.
Action start 14:19:24: AppSearch.
Action ended 14:19:24: AppSearch. Return value 0.
Action start 14:19:24: CCPSearch.
Action ended 14:19:24: CCPSearch. Return value 0.
Action start 14:19:24: RMCCPSearch.
Action ended 14:19:24: RMCCPSearch. Return value 0.
Action start 14:19:24: ValidateProductID.
Action ended 14:19:24: ValidateProductID. Return value 1.
Action start 14:19:24: CostInitialize.
MSI (s) (64:9C) [14:19:24:662]: Baseline: Sorting baselines for {B5DF29E9-885D-4FD0-B62D-33615AC65A53}.
MSI (s) (64:9C) [14:19:24:662]: Baseline: New baseline 7.11.0 from transaction.
MSI (s) (64:9C) [14:19:24:662]: Baseline: Sorted order Native: Order 0.
MSI (s) (64:9C) [14:19:24:662]: Baseline Data Table:
MSI (s) (64:9C) [14:19:24:662]: ProductCode: {B5DF29E9-885D-4FD0-B62D-33615AC65A53} Version: 7.11.0 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (s) (64:9C) [14:19:24:662]: Baseline File Table:
MSI (s) (64:9C) [14:19:24:662]: Dumping __MsiPatchMedia table...
MSI (s) (64:9C) [14:19:24:662]: Delta compression fallback method for this product transaction is 'MSI 2.0 legacy obsolescence'
Action ended 14:19:24: CostInitialize. Return value 1.
Action start 14:19:24: FileCost.
Action ended 14:19:24: FileCost. Return value 1.
Action start 14:19:24: IsolateComponents.
Action ended 14:19:24: IsolateComponents. Return value 1.
Action start 14:19:24: CostFinalize.
Action ended 14:19:24: CostFinalize. Return value 1.
Action start 14:19:24: SetODBCFolders.
Action ended 14:19:24: SetODBCFolders. Return value 1.
Action start 14:19:24: MigrateFeatureStates.
Action ended 14:19:24: MigrateFeatureStates. Return value 0.
Action start 14:19:24: InstallValidate.
Action ended 14:19:24: InstallValidate. Return value 1.
Action start 14:19:24: InstallInitialize.
Action ended 14:19:29: InstallInitialize. Return value 1.
Action start 14:19:29: AllocateRegistrySpace.
Action ended 14:19:29: AllocateRegistrySpace. Return value 1.
Action start 14:19:30: ProcessComponents.
Action ended 14:19:30: ProcessComponents. Return value 1.
Action start 14:19:30: UnpublishComponents.
Action ended 14:19:30: UnpublishComponents. Return value 1.
Action start 14:19:30: MsiUnpublishAssemblies.
Action ended 14:19:30: MsiUnpublishAssemblies. Return value 0.
Action start 14:19:30: UnpublishFeatures.
Action ended 14:19:30: UnpublishFeatures. Return value 1.
Action start 14:19:30: StopServices.
Action ended 14:19:30: StopServices. Return value 1.
Action start 14:19:30: DeleteServices.
Action ended 14:19:30: DeleteServices. Return value 1.
Action start 14:19:30: UnregisterComPlus.
Action ended 14:19:30: UnregisterComPlus. Return value 1.
Action start 14:19:30: SelfUnregModules.
Action ended 14:19:30: SelfUnregModules. Return value 1.
Action start 14:19:30: UnregisterTypeLibraries.
Action ended 14:19:30: UnregisterTypeLibraries. Return value 1.
Action start 14:19:30: RemoveODBC.
Action ended 14:19:30: RemoveODBC. Return value 1.
Action start 14:19:30: UnregisterFonts.
Action ended 14:19:30: UnregisterFonts. Return value 1.
Action start 14:19:30: RemoveRegistryValues.
Action ended 14:19:30: RemoveRegistryValues. Return value 1.
Action start 14:19:30: UnregisterClassInfo.
Action ended 14:19:30: UnregisterClassInfo. Return value 1.
Action start 14:19:30: UnregisterExtensionInfo.
Action ended 14:19:30: UnregisterExtensionInfo. Return value 1.
Action start 14:19:30: UnregisterProgIdInfo.
Action ended 14:19:30: UnregisterProgIdInfo. Return value 1.
Action start 14:19:30: UnregisterMIMEInfo.
Action ended 14:19:30: UnregisterMIMEInfo. Return value 1.
Action start 14:19:30: RemoveIniValues.
Action ended 14:19:30: RemoveIniValues. Return value 1.
Action start 14:19:30: RemoveShortcuts.
Action ended 14:19:30: RemoveShortcuts. Return value 1.
Action start 14:19:30: RemoveEnvironmentStrings.
Action ended 14:19:30: RemoveEnvironmentStrings. Return value 1.
Action start 14:19:30: RemoveDuplicateFiles.
Action ended 14:19:30: RemoveDuplicateFiles. Return value 1.
Action start 14:19:30: RemoveFiles.
Action ended 14:19:30: RemoveFiles. Return value 1.
Action start 14:19:30: RemoveFolders.
Action ended 14:19:30: RemoveFolders. Return value 1.
Action start 14:19:30: CreateFolders.
Action ended 14:19:30: CreateFolders. Return value 1.
Action start 14:19:30: MoveFiles.
Action ended 14:19:30: MoveFiles. Return value 1.
Action start 14:19:30: InstallFiles.
MSI (s) (64:9C) [14:19:30:150]: Dumping binary patch manager data...
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'ILAUNCHR.CFG' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'fsc_jar.jar' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'ILAUNCHR.exe' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'RunSetup.exe' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'ilwrap.exe' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: Dumping binary patch manager data...
Action ended 14:19:30: InstallFiles. Return value 1.
Action start 14:19:30: PatchFiles.
Action ended 14:19:30: PatchFiles. Return value 1.
Action start 14:19:30: DuplicateFiles.
Action ended 14:19:30: DuplicateFiles. Return value 1.
Action start 14:19:30: BindImage.
Action ended 14:19:30: BindImage. Return value 1.
Action start 14:19:30: CreateShortcuts.
Action ended 14:19:30: CreateShortcuts. Return value 1.
Action start 14:19:30: RegisterClassInfo.
Action ended 14:19:30: RegisterClassInfo. Return value 1.
Action start 14:19:30: RegisterExtensionInfo.
Action ended 14:19:30: RegisterExtensionInfo. Return value 1.
Action start 14:19:30: RegisterProgIdInfo.
Action ended 14:19:30: RegisterProgIdInfo. Return value 1.
Action start 14:19:30: RegisterMIMEInfo.
Action ended 14:19:30: RegisterMIMEInfo. Return value 1.
Action start 14:19:30: WriteRegistryValues.
Action ended 14:19:30: WriteRegistryValues. Return value 1.
Action start 14:19:30: WriteIniValues.
Action ended 14:19:30: WriteIniValues. Return value 1.
Action start 14:19:30: WriteEnvironmentStrings.
Action ended 14:19:30: WriteEnvironmentStrings. Return value 1.
Action start 14:19:30: RegisterFonts.
Action ended 14:19:30: RegisterFonts. Return value 1.
Action start 14:19:30: InstallODBC.
Action ended 14:19:30: InstallODBC. Return value 0.
Action start 14:19:30: RegisterTypeLibraries.
Action ended 14:19:30: RegisterTypeLibraries. Return value 1.
Action start 14:19:30: SelfRegModules.
Action ended 14:19:30: SelfRegModules. Return value 1.
Action start 14:19:30: RegisterComPlus.
Action ended 14:19:30: RegisterComPlus. Return value 1.
Action start 14:19:30: InstallServices.
Action ended 14:19:30: InstallServices. Return value 1.
Action start 14:19:30: StartServices.
Action ended 14:19:30: StartServices. Return value 1.
Action start 14:19:30: InstallExecute.
Action ended 14:19:32: InstallExecute. Return value 1.
Action start 14:19:32: RunILauncher.
Action ended 14:19:32: RunILauncher. Return value 1.
Action start 14:19:32: RegisterUser.
Action ended 14:19:32: RegisterUser. Return value 1.
Action start 14:19:32: RegisterProduct.
Action ended 14:19:32: RegisterProduct. Return value 1.
Action start 14:19:32: PublishComponents.
Action ended 14:19:32: PublishComponents. Return value 1.
Action start 14:19:32: MsiPublishAssemblies.
Action ended 14:19:32: MsiPublishAssemblies. Return value 0.
Action start 14:19:32: PublishFeatures.
Action ended 14:19:32: PublishFeatures. Return value 1.
Action start 14:19:32: PublishProduct.
Action ended 14:19:32: PublishProduct. Return value 1.
Action start 14:19:32: InstallFinalize.
MSI (s) (64:9C) [14:19:59:637]: Product: F-Secure Client Security -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action RunILauncher, location: C:\Programmer\F-Secure\FSMSI\ilwrap.exe, command: fsc_jar.jar /U /F /ROFTWARE\Data Fellows\F-Secure\ILauncher /C
Action ended 14:19:59: InstallFinalize. Return value 3.
Action ended 14:19:59: INSTALL. Return value 3.
Action ended 14:19:59: ExecuteAction. Return value 3.
Action start 14:19:59: FatalError.
DEBUG: Error 2826: Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
Action ended 14:20:01: FatalError. Return value 2.
Action ended 14:20:01: INSTALL. Return value 3.
=== Logging stopped: 21-08-2008 14:20:01 ===
MSI (c) (D4:10) [14:20:01:594]: Product: F-Secure Client Security -- Installation failed.

Hi nikki7,
Are you using a non-english operating system? If you are, then the KnowledgeBase article I included below should be helpful. I hope this helps!
Error -2705 from the MSI Installer Built with the Visual Studio .NET Installation Builder: http://digital.ni.com/public.nsf/allkb/19CA3B8F15B4FB9386256DDA006DFED8?OpenDocument
Regards,
Jason D
Applications Engineer
National Instruments

Microsoft Security Client EventID 2003 0x80041016

We have a couple of 2003 servers with SCEP AV installed and fully up to date, but we're still getting the following event logged. Reinstalled EP but still no luck getting rid of this event. Please help.
Event Type: Error
Event Source: Microsoft Security Client
Event Category: None
Event ID: 2003
Date: 10/30/2014
Time: 8:39:13 AM
User: N/A
Computer:
Description:
The description for Event ID ( 2003 ) in Source ( Microsoft Security Client ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 0x80041016.

Hi,
According to the error code and Event ID above, it seems to be a WMI issue.
You could try to use WMI Diagnosis Utinity to troubleshoot this issue.
Reference:
WMI Troubleshooting
http://msdn.microsoft.com/en-us/library/aa394603(v=vs.85).aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot create client identification file

Hi.
I am trying to run the Excel Add-In on Windows 7 but when I start excel I get the following Essbase Error:
Cannot create client identification file
Is there any workaround to avoid this error?
Thanks,
JC

Update:
I tried running the Excel as Administrator and didn't get the error message. The ini file was created in WINDOWS but the content is incomplete. The file is supposed to contain [Login] and [App Manager] sections, which are missing. And has only a portion of the [CSL Global Options] section.
Excel still is not behaving as expected.
[CSL Global Options]
DoubleClick=1
RightMouse=1
FlashBack=1
RouteMessages=0
PurgeLogOnInit=1
DisplayUnknowns=1
RetrieveOnDblClk=0
MemSelSaveMsg=0
DatalessNav=0
ErrorLevel=2
SheetOpts=A1100000000030000000001100000_0000
JC

Check Point VPN-1 Secure Client Software Compatibility w/ Intel iMac

Is this SW compatible with the new iMac? I'm trying to install a Secure Client SW but it stops in the middle of installation giving out only a general message - there were errors during the installation. Please help.
Thanks.

The CheckPoint VPN-1 Secure Client software is only compatible with Mac OS v 10.3 (Panther). I had the same issue and am waiting for CheckPoint to update the software.
Miguel

Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

i keep getting this Event in my event viewer and dont know what to do. Could use any help

Hi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support

Bsod Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

I have a t540 with all hardawre and software updates running Win 7/64 pro and get this message repeatedly. Microsoft says to delete MSSEOOBE.etl but that file doesn't appear to be in the 64 bit version of Microsoft Security Essentials
If it happen when the PC is in SLEEP mode it causes an abnormal shutdown/recovery when the PC restarts Did uninstall and reinstall MSE
One MS thread says to contact the OEM - so here I am.
I was also getting Code 10 Disk Errors but there was a MS KB fix for that
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          5/29/2014 8:39:03 AM
Event ID:      3
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      bill-THINK
Description:
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>3</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>14</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2014-05-29T13:39:03.627614300Z" />
    <EventRecordID>209</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="212" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>bill-THINK</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">Microsoft Security Client OOBE</Data>
    <Data Name="FileName">C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl</Data>
    <Data Name="ErrorCode">3221225485</Data>
    <Data Name="LoggingMode">5</Data>
</EventData>
</Event>
Any thoughts? I guess I will try another AntiVirus but Microsoft Security Essential is running on 2 other Win 7 laptops
Thanks

Hi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support

Microsoft Security Client OOBE stopped due to the following error: 0xC000000D

I keep getting this error in my event Viewer and I removed Microsoft Security Client a few weeks ago and replaced it with Bitdefender 2012
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
I am also getting these aswell...
Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0811960D92F5. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the
network address (DHCP) server.
A problem prevented Customer Experience Improvement Program data from being sent to Microsoft, (Error 80004005).

If you do not want to reinstall Microsoft Security Essentials to stop this problem, there is a step which you MUST, I repeat, MUST follow. As indicated above by Zuhl3156, YOU MUST, again, MUST shutdown the security counter. This is a problem
when you uninstall MSE, it does not remove the security counter. This is the reason that everyone says to delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl file. This file is used and created by this counter.
If you have uninstalled the MES, then you MUST delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl. But, MOST IMPORTANTLY, you MUST go into into Computer Management and drill down into:
System Tools -> Performance -> Data Collector Sets -> Startup Event Tracing Sessions
Then, in the frame to the right on that window, select Microsoft Security Client OOBE, right click on it and select Properties. Then DISABLE it (uncheck the Enabled box). Then, when you select OK, if you have uninstalled MSE and NOT reinstalled
it, the entry in the right frame will 'magically' disappear.
This is a problem with the uninstall of MSE and needs to be resolved by Microsoft (hopefully they are reading this). It has taken me DAYS to discover this, and many different attempts to resolve this. But, apparently, this has now resolved my
problem. I have seen performance counters cause many problems in my experience with Windows, and am very confident that this resolves the issue.
I cannot thank Zuhl3156 enough for his suggestion and my willingness to try it (I noticed 'performance counter' and jumped on it). It seems to work wonderfully for the moment.
I hope this helps someone else who has spent days trying to chase this nightmare down.
Jim

Microsoft Security Client OOBE Error plus 2 CSRSS Processes?

This has to be a bit abnormal, but apparently this concerns what happened 30 minutes ago, System just flat out Froze up and then after the restart an error that received the Microsoft Security Client OOBE Error Code 0xc000000D had happened in the Kernel
Tracing event, following the restart 2 CSRSS Process are now present, normally it should be 1 as a priority, and in turn that tells me an Exploit that Microsoft Might have missed some how hit my system and this issue is now concerning.

Hi,
Do you still get OOBE Error Code now?
Regarding your problems getting Microsoft Security Essentials OOBE error code 0xc000000D.
Please navigate to C:/program data/microsoft/microsoft security essentials/support/ , and then locate the file: "MSSEOOBE.etl" and simply delete it.
The MSE will recreate it after your restarting your computer. That could solve the issue.
Please refer to the following thread for more details.
Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D
http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/session-microsoft-security-essentials-oobe-stopped/387c21ed-75db-47e3-9baf-687f6c66f0eb
My Windows 7 has two csrss processes too.
We can locate the file in the folder C: Windows/System32. Please test.
If they are located in other folder, we could suspect them as virus. I suggest you to conducting a Antivirus scan.
Please refer to the following thread for more detail.
2 csrss.exe running Windows 8.1.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/2-csrssexe-running-windows-81/cdbaf6d0-4920-4595-9f4f-b0d6e45b9d2a
If there are any problems, please let me know.
Best regards

EJB-Security client identification

Similar Messages

Maybe you are looking for