Email check on User Master

I want to make the email field (SZA5_D0700-SMTP_ADDR) on SU01 mandatory. Is there a way? any BAdi or User-Exit which i can use to make this check ?
Thanks
A.

Hi,
use program 'RSMODPRF' to create field exits .
Execute program 'RSMODPRF', entering the data element of the field
Create function module when prompted, and add your code to the source section using the parameter 'INPUT' as the field value you are checking Save and activate Function and execute Enter data element Save and activate
Execute program 'RSMODPRF' again but this time leave data element field blank.
Select the checkbox for the data element you have just created and choose option: Field exit->Activate This will now be active for all instances of this data element, but you can assign specific program and screen combinations by pressing the 'Assign prog./screen' button. You can also change the code you entered in the field exit function module by pressing the 'Edit FM' button.
implement the validation code in created FM.
Regards
Appana

Similar Messages

User Master Record : Which table the Email Id stored?

Hi All,
Which table and what is the field the Email id stored in.
I checked the USR02 and some other tables and I did't find it.
Thanks.
Rgds,
Raj.

>
John Navarro wrote:
> I run into to this problem many moons ago and the solution is to run tcode SQVI.
>
> Create a query and join the following tables (USR21 & ADR6) and use the relevant fields. I have the complete steps documented in a procedure if you need it posted on this thread.
>
> Let me know and good luck!
OK - Here it is! I forgot I got the step by step procedure on this forum
You can get the information through one more option also. In case of function module you need to execute the module again and again for each user or may be need to write a report. I would like to suggest you an alternative. That is making use of queries.
1. Go to transaction SQVI.
2. In the input field Quick View give the any name for query for example Z_EMAIL_ADD.
3. Choose create option. In the resulting pop up give description in Title field. In data source choose TABLE JOIN. Select Basis mode.
4. In the next screen choose INSERT TABLE pushbutton and in the pop up give USR21. Then again choose INSERT TABLE pushbutton and this time give ADR6.
5. Now go back using back arrow or F3.
6. Now in the new screen you will be under the tab strip List fld select.. From that entries under available filed (on right hand side) select User name in user master record and the first entry for Internet mail (SMTP) address. Now using single arrow pushbutton pointing towards left move these fields to tabstrip List fld select.
7. Now go to tabstrip selection filed. As done in step 6 move User name in user master record under it.
8. Save the changes and go back. A pop up will come asking you to save quick view Z_EMAIL_ADD. Choose yes.
9. Now execute the query. In the input field you can give one user or multiple users at a given time.
This approach is easier and time saving in my opinion and gives output in desirable format.
Regards,
-John N.

Needed a User Exit to cross-check the mtrll master at the time of making PR

Hello Experts,
As per the requirement from my client I need a USER Exit in PR where before saving the PR the system should check the Material Master of every line item for the Material Type and MRP controller fields.
for the particular combination of material Type and MRP controller, the system should propose an account assignment which could be achieved but User Exit is required.
Please help.
Thanks in advance
and Regards
Yawar Khan

Hi Ravi,
Thanks for the reply, I will check back.
Regards,
yawar Khan

Set Email as Mandatory field in User Master

Hi There,
Could anyone please tell me what are all the possible options to set Email as mandatory field in user master?
Thanks in advance.
Rajesh.

Hi,
could maybe a transaction variant (create via SHD0) be helpful? You have then however to also create a "variant transaction" (e.g. ZSU01) pointing to it and remove SU01 from your admins to enforce it.
Advantage is, that this is SAP standard and compatible to any future SP implementations.
Regards,
Markus

No provisioning of User Group for authorization field in user master

We are implementing CUP 5.3 workflows. Both in manual proviosing and automated provisioning based on User Defaults the user group gets only provisioned to the Groups tab in SU01. The field User Group for authorization on the Logon data tab remains empty (field CLASS from system table USLOGOND, filling CLASS field in table USR02).
In User defaults both under user default as on the user group tab the user groups have been defined. In manual provisioning the correct list of user groups get displayed for selection.
Under field mapping in the Application field I only find User Group in user master maintenance, but not User group for authorization. However I would assume I do not need to use field mapping, as I want to automate this provisioning based on user defaults.
Am I missing a configuration setting here? If so, where can I set it?
I would assume the provisioning of this field is possible. RAR reports the user group also based on the User group for auhtorization and not from the Groups tab.

S.Pados,
I can assure you that what I said in my last response does provision the User Group For Authorization Check on the Logon Data tab; in fact, I was having the opposite issue where the Group tab was not being provisioned; however, I am ruunning AE 5.2 and you said you are running 5.3; maybe something did change or got lost in the releases; it probably is good to see what SAP has to say about this; I would hate to lose this capapbility when I upgrade to AE 5.3
As far as using the custom field for multiple applications, would that field not be usable for any of the applications you would select in the request form?; if you are using the same table names in the different SAP systems (selectable by the application field on the request) would the drop down selections be whatever the table has defined for that system? I may not be understanding something here so I am just asking;
It would be great to have a Group field automatically filled in by another selection to avoid the user involvement; I agree with you there; because of our concerns on users entering the AE request, our shop has decided to continue with the users submitting the request through normal email and the security administrators perform the AE entering; this way we have a better idea on something like the GROUP field; we have an option to include the original email as an attachment for justification of the request
Sorry I could not be of more help
Jerry
Ryerson,Inc.

Table that stores User Master Data info

Can someone tell me the table name that stores the email addresses and phone numbers maintained in user master record (SU01)? I need to generate a list of users with this info.
A quick answer will be very appreciated.

Hi Bernhard,
Could you please let me know how I can get the details from "bapi_user_get-detail" .
I have not used txn BAPI. Now I executed it. I see two tab strips "Alphabetical" and "Hierarchical". I selected "Alphabetical" and traversed till the USER, Expanded and found the "GetDetail" method.
Here I have checked that there is this function module "BAPI_ADDRESSORG_GETDETAIL"
I did a test thru SE37 and It was asking about:
OBJ_TYPE
OBJ_ID
OBJ_ID_EXT
CONTEXT
I have provided the USER, <user name> in first two fields and did not get any results.
Please let me know how to get the details.
Regards,
Srihari
PS: the CONTEXT was 0001 (default). Also please let me know if I have to get the details for n number of users.
Edited by: Srihari Rao on Jul 30, 2008 2:07 PM

Unable to send email to the users from Project Server Workflow

Hello all,
I am facing issues in sending emails to the users from the workflow in SharePoint Designer 2013.
I am trying to send emails to valid users in a Project server 2013 Workflow by Email action.
I have set up the SMTP server successfully, I have configured SMTP server successfully in IIS manager 6.0
I have configured the outgoing e-mail settings in Central Administration successfully,
I have configured the SMTP email settings for my web app in IIS manager as well.
I have configured and synced the User Profile App with the eMail addresses from Active Directory as well.
I have configured the Alerts and Reminders in Operational Policies of PWA settings as well.
I can send the emails to the users successfully through Powershell.
But when I am trying to Start a Task Process with a user in the workflow, the task process starts but it never sent an email notification. So I tested by using the Action Email, that also the user is unable to receive any email. But the Workflow is not giving
any error also. The email sending is successful, but the user is unable to receive it. The workflow succeeds to next phase without any errors.
So to cross verify I tried 'Alert Me' option on a list, but that also is not sending(or might be sending but the user is not receiving) the mail.
What else should I do to solve this issue.
Please help me.
Thanks,
Shanky

Hello Paul,
I tried editing the PWA instance as you said, but that also didn't help :(
I even restarted the Project Server Service, but nothing is changed.
I tried creating a new workflow for a List and used send email there, but that also is not sending the mail :(
How do I check where the issue is from ? I mean, whether the workflow is sending the mail and the mail server is not receiving? or whether the workflow is not sending the mail itself? how do I check this? Is there any way to log these details?
Please help me regarding this issue, I am totally clueless how to proceed.
Thanks,
shanky

Send email to external user using fm 'SO_NEW_DOCUMENT_ATT_SEND_API1'

Hi friends,
I wrote this code to send mail to external user from sap.
It did not work properly can anyone help me to send email to extenal user.
The return code after executing the function module is 2.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creating the document to be sent
DOC_CHNG-OBJ_NAME = 'OFFER'.
DOC_CHNG-OBJ_DESCR = 'abcd'.
OBJTXT = 'aaaaaaaaaaa:'.
APPEND OBJTXT.
OBJTXT = 'bbbbbbbbbb'.
APPEND OBJTXT.
OBJTXT = 'ccccccccccccc.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
RECLIST-RECEIVER = mail address.
RECLIST-REC_TYPE = 'U'.
RECLIST-COM_TYPE = 'INT'.
RECLIST-NOTIF_DEL = 'X'.
RECLIST-NOIF_NDEL = 'X'.
APPEND RECLIST.
Creating the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'RAW'.
APPEND OBJPACK.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
OBJBIN = ' \O/ '. APPEND OBJBIN.
OBJBIN = '     '. APPEND OBJBIN.
OBJBIN = ' / \ '. APPEND OBJBIN.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'picasso.bmp'. APPEND OBJHEAD.
Creating the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'BMP'.
OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Reproduction object 138'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK..
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
          COMMIT_WORK   = 'X'
     TABLES
          PACKING_LIST = OBJPACK
          OBJECT_HEADER = OBJHEAD
         CONTENTS_BIN = OBJBIN
           CONTENTS_TXT = OBJTXT
           RECEIVERS     = RECLIST
      EXCEPTIONS
           TOO_MANY_RECEIVERS = 1
           DOCUMENT_NOT_SENT = 2
           OPERATION_NO_AUTHORIZATION = 4
           OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi,
Check in SCOT t-code whether it has been properly configred to send the mails
Regards,
siva chalasani.

Send Welcome Email to New User using the Scripting Agent

Hi
I require some assistance please. I have found a number of scripts online to send a Welcome Email to new users whereby they make use of the ScriptingAgent.xml file.
I like the way the scripts have been configured and have mashed up one or two scripts together for my desired result however when testing in my lab (Exchange 2013) I have found tow problems.
The problems are:
1. When creating a new user and mailbox (New-Mailbox) via the ECP the script throws out an error which I will post later in this post. The mailbox is created fine but it does not send out a welcome email. When a user is created in ADUC and then a mailbox
is created (Enable-Mailbox) the welcome email is sent out correctly.
2. In the script i have a section to check for NewUser00 in the HTML file and replace that with the Users Name and Surname, however this does not work correctly, I just come up blank:
The Script:
<?xml version="1.0" encoding="utf-8" ?>
<Configuration version="1.0">
<Feature Name="WelcomeEmail" Cmdlets="New-Mailbox,Enable-Mailbox">
<ApiCall Name="OnComplete">
if($succeeded) {
# Waiting for synchronization after mailbox has been created.
Set-ADServerSettings -ViewEntireForest $true
Start-Sleep -s 10
# New-Mailbox triggered. Taking SamAccountName parameter.
if ($provisioningHandler.UserSpecifiedParameters.Contains("SamAccountName") -eq $true) {
$UsrSamAccountName = $provisioningHandler.UserSpecifiedParameters["SamAccountName"]
$USRdfirst = $provisioningHandler.UserSpecifiedParameters["FirstName"]
$USRdlast = $provisioningHandler.UserSpecifiedParameters["LastName"]
$UsrAlias = (Get-Mailbox -Filter {SamAccountName -eq $UsrSamAccountName}).Alias.ToString()
$USRdname = $USRdfirst + " " + $USRdlast
# Enable-Mailbox triggered. Taking Identity parameter, this is the only one avalaible in this case.
if ($provisioningHandler.UserSpecifiedParameters.Contains("Identity") -eq $true) {
$UsrIdentity = $provisioningHandler.UserSpecifiedParameters["Identity"].ToString()
$USRdfirst=$provisioningHandler.UserSpecifiedParameters["FirstName"]
$USRdlast=$provisioningHandler.UserSpecifiedParameters["LastName"]
$UsrAlias = (Get-Mailbox -Identity $UsrIdentity).Alias.ToString()
$USRdname= $USRdfirst + " " + $USRdlast
# Defining variables.
$UsrAddr = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).PrimarySmtpAddress.ToString()
$UsrOU = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).OrganizationalUnit
# Sending email notification to the user in specific OU.
if ($UsrOU -match "Contoso.com") {
# HR #
$fromHR="[email protected]"
$SubjectHR="'Welcome to Contoso'"
$BodyHR = [string] (get-content ("c:\welcome\WelcomeMSG.htm"))
$BodyHR = $BodyHR -replace "NewUser00",$USRdname
$fileHR = "c:\welcome\WelcomeMSG.htm"
$smtp="192.168.x.x"
Send-MailMessage -From $fromHR -To $UsrAddr -Subject $SubjectHR -Body $BodyHR -BodyAsHtml -Encoding ([System.Text.Encoding]::UTF8) -SmtpServer $Smtp
# Clearing variables. Each one in its own line in order to prevent error messages from being shown on EMC.
if ($UsrAlias) { Remove-Variable UsrAlias }
if ($UsrAddr) { Remove-Variable UsrAddr }
if ($UsrOU) { Remove-Variable UsrOU }
if ($UsrMsg) { Remove-Variable UsrMsg }
if ($UsrIdentity) { Remove-Variable UsrIdentity }
if ($UsrSamAccountName) { Remove-Variable UsrSamAccountName }
</ApiCall>
</Feature>
</Configuration>
The Error for issue 1:
The cmdlet extension agent with the index 5 has thrown an exception in OnComplete().
The exception is: Microsoft.Exchange.Provisioning.ProvisioningException: ScriptingAgent:
Exception thrown while invoking scriptlet for OnComplete API: You cannot call a method on a
null-valued expression.. ---> System.Management.Automation.RuntimeException:
You cannot call a method on a null-valued expression. at CallSite.Target(Closure , CallSite , Object ) at
System.Dynamic.UpdateDelegates.UpdateAndExecute1[T0,TRet](CallSite site, T0 arg0) at
System.Management.Automation.Interpreter.DynamicInstruction`2.Run(InterpretedFrame frame) at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
--- End of inner exception stack trace --- at Microsoft.Exchange.ProvisioningAgent.ScriptingAgentHandler.OnComplete(Boolean succeeded, Exception e)
at Microsoft.Exchange.Provisioning.ProvisioningLayer.OnCompleteImpl(Task task, Boolean succeeded, Exception exception)
Any assistance in resolving these two issues will be really appreciated

Ok I am gonna to answer my own question.
I have persevered through the day and have resolved my two issues. I hope this assist others within the community.
Script:
<?xml version="1.0" encoding="utf-8" ?>
<Configuration version="1.0">
<Feature Name="WelcomeEmail" Cmdlets="New-Mailbox,Enable-Mailbox">
<ApiCall Name="OnComplete">
if($succeeded) {
# Waiting for synchronization after mailbox has been created.
Start-Sleep -s 30
Set-ADServerSettings -ViewEntireForest $true
# New-Mailbox triggered. Taking SamAccountName parameter.
if ($provisioningHandler.UserSpecifiedParameters.Contains("Name") -eq $true) {
$UsrSamAccountName = $provisioningHandler.UserSpecifiedParameters["Name"]
$Usrname = (Get-Mailbox -identity $UsrSamAccountName | Select Name | foreach { $_.Name})
$UsrString = $Usrname | Out-String
$UsrAlias = (Get-Mailbox -Filter {Name -eq $UsrSamAccountName}).Alias.ToString()
# Enable-Mailbox triggered. Taking Identity parameter, this is the only one avalaible in this case.
if ($provisioningHandler.UserSpecifiedParameters.Contains("Identity") -eq $true) {
$UsrIdentity = $provisioningHandler.UserSpecifiedParameters["Identity"].ToString()
$Usrname = (Get-Mailbox -identity $UsrIdentity | Select Name | foreach { $_.Name})
$UsrString = $Usrname | Out-String
$UsrAlias = (Get-Mailbox -Identity $UsrIdentity).Alias.ToString()
# Defining variables.
$UsrAddr = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).PrimarySmtpAddress.ToString()
$UsrOU = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).OrganizationalUnit
# Sending email notification to the user in specific OU.
if ($UsrOU -match "contoso.com") {
# HR #
$fromHR="[email protected]"
$SubjectHR="'Welcome to CONTOSO'"
$BodyHR = [string] (get-content ("c:\welcome\WelcomeMSG.htm"))
$BodyHR = $BodyHR -replace "NewUser00",$UsrString
$fileHR = "c:\welcome\WelcomeMSG.htm"
$smtp="x.x.x.x"
Send-MailMessage -From $fromHR -To $UsrAddr -Subject $SubjectHR -Body $BodyHR -BodyAsHtml -Encoding ([System.Text.Encoding]::UTF8) -SmtpServer $Smtp
# Clearing variables. Each one in its own line in order to prevent error messages from being shown on EMC.
if ($UsrAlias) { Remove-Variable UsrAlias }
if ($UsrAddr) { Remove-Variable UsrAddr }
if ($UsrOU) { Remove-Variable UsrOU }
if ($UsrMsg) { Remove-Variable UsrMsg }
if ($UsrIdentity) { Remove-Variable UsrIdentity }
if ($UsrSamAccountName) { Remove-Variable UsrSamAccountName }
</ApiCall>
</Feature>
</Configuration>

Update email address in vendor master using report RPRAPA00

Hi All ,
My requirement is to update email address in communication tab of vendor master .
There is one report RPRAPA00 running in background to update vendor master except email .
I could not able to see anything to update email address in user-exits available in report RPRAPA00.
Is there any way to update email address using this report or any alternative way .
Please help .
Thanks and regards ,
Sijin KP.

You can use a couple of function modules from function group SZA0 to update the email address.
Attached is a simple test program that inserts a new email address for a vendor whose address number is known (from LFA1-ADRNR):
DATA: comtab TYPE STANDARD TABLE OF adsmtp WITH HEADER LINE.
comtab-consnumber = '001'.
comtab-flgdefault = 'X'.
comtab-smtp_addr = 'email_address_comes_here'.
comtab-dft_receiv = 'X'.
comtab-valid_from = '00010101'.
comtab-valid_to = '99991231'.
comtab-updateflag = 'I'.
APPEND comtab.
CALL FUNCTION 'ADDR_COMM_MAINTAIN'
EXPORTING
    address_number                       = '0000141306'
    table_type                           = 'ADSMTP'
TABLES
    comm_table                           = comtab
EXCEPTIONS
   parameter_error                      = 1
   address_not_exist                    = 2
   internal_error                       = 3
   OTHERS                               = 4
IF sy-subrc NE 0.
WRITE sy-subrc.
ELSE.
CALL FUNCTION 'ADDR_MEMORY_SAVE'
   EXCEPTIONS
     address_number_missing       = 1
     person_number_missing        = 2
     internal_error               = 3
     database_error               = 4
     reference_missing            = 5
     OTHERS                       = 6
IF sy-subrc NE 0.
    WRITE sy-subrc.
ENDIF.
ENDIF.

How to include a new field for checking duplicate customer master

Dear All
we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
Procedure:
Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
regards,

Hi
Use the enhancement SAPMF02D to check these values.
Regards
Eduardo

Email Notification after User Self Registers in OIM

Hello there,
Can you please tell me how can send an email notification to users as soon as they register themselves in OIM using the OOTB OIM Self Registration.
Actually I am generating a unique User ID as a Post Insert in Create User Event Handler. By real question is to actually send this particular generated User ID to the user in an email - how can I do that?
Thanks.

The exact scenario is an end-user directly self registers himself providing all the necessary values of User ID, First Name, Last Name, Email, Password (mandatory fields). But I want this request to be directly completed/approved. I don't want any kind of administrator intervention in creating these users in OIM such as providing approval details, etc. So I have added the remaining necessary fields on self registration page itself for users to be filled out - Organization Name, User-Type, Employee Role. The user provides all these details on OIM self registration and it directly gets created in OIM.
I have made an email definition of type "provisioning related" and included the necessary UDF's in it. And I have added this email defn to the "Email Notify" task of "Xellerate User" process. I have already checked the "Assignee", "Requester", "User" option box in the "Notification" tab. So now the problem is after user creation - the administrator is receiving an email containing the UDF values but the user is not receiving that. But the user is receiving the "Self Registration" email definition email which I don't want to send.
So really speaking I want to send an email on User creation containing the UDF values - but it is not sending it. I have integrated the "Email Notify" task with "tcCompleteTask" system adapter. Am I missing anything?
Please let me know as this func. needs to be in place asap.
Thanks.

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Date format in user master record cannot be interpreted

When running an Infopackage from BW to an R/3 customer extractor, the R/3 job cancels with this error message, "Date format in user master record cannot be interpreted". I can restart the R/3 job program from the ABAP editor screen using the same variant that BW issued and the job runs without cancelling.
NOTE: This process runs without any errors on our QAS system.
Any idea what causes this error message and how I can fix it?

Hi Alan,
I have resolved this issue by myself. Same just like yours mine is also a custom Datasource.
Solution for this is go to source system check your Background user id i.e like BWALEREMOTE or ALEREMOTE which ever id you have created for setting up RFC connection between R/3 & BW. Check your Date format which has been set for your background user. Use the second format mm/dd/yy. Then run your extraction you will not face any problem.
If you still have any problem do let me know. If this solution helps you assign points.
Regards,
Bhuvana.

Disable duplicate email check for external candidate registration

Hi,
I am working with eRecruitment 6.0 and I would like to disable the duplicate email check on the external candidate registration page. Has anyone done this before? I have chased the code down to where it check for correct email syntax but I can't find where it does the duplicate email check. I debugged to where I was starting to see BP type function modules and bapis but I still can't find the check. I just want to turn it off for testing then turn it back on and test more. I have searched OSS and SDN and still no answers. I thought about using an enhancement point to 'ignore' the message but by the point the system has already decided not to create the user so ignoring the message is a mute point.
Anyone been down this road and can point me in the right direction that would be greatly appreciated.
Thanks!

Hola,
Ok a small 'enhancement' to CL_HRRCF_ADDRESS_SERVICE->IS_EMAIL_UNIQUE has done the trick. Not exactly a best practice but will get me through this testing. NO this will not be going to production. This is strictly a test.
Cheers!

Email check on User Master

Similar Messages

Maybe you are looking for