Email ID and Swift code through Vendor Mass  MAintenance XK99

Dear experts, is there a way to mass update Vendor email lD and swift code through XK99?
I found all other fields, but not these two. What could be the work around if not possible through XK99?
Thank you and Warm regards,
Sumit.

It's not possible to update thro XK99.
You need to run a BDC to update this data frm relevant tables. eg: LFB1 table you get one unique ID( Personal No.) for each vendor. This you input in relevant Address table (say ADRC) to update the Address
Umakanth

Similar Messages

  • Table name from which to extract bank name and swift code by key field as vendor code

    Please help with the table name from which we can extract the bank name and swift code of vendors with the key input as vendor numbers

    Hello Subhadra, I'm sorry, I should've said join of LFBK and BNKA. The fields for the join will be the bank country(BANKS) and bank key (BANKL).
    If you have not found a docu on SQVI already, you can refer to this:
    How to create Report by using SQVI
    This is how your join should look in BASIS mode, your selection parameter should be vendor code LIFNR; output fields with be bank name BANKA and swift code SWIFT.

  • Correspeondent of beneficiary bank name and swift code

    Hi,
    We have a requiremnet.
    When we pay a foreign currency to foreign vendor, we not only need the beneficiary bank name, account and swift code(which can be maintained in vendor master data and bank key), but also need correspondent of beneficiary's bank name and swift code.
    Where is SAP can maintain correspondent of beneficiary's bank name and swift code? Is there a standard field to maintain this?
    Thanks.

    Hi,
    Beneficiary bank details are maintained in TCode FIBPU.
    Regards,
    Sanjay

  • Bank Key, Bank Number and SWIFT code

    Hi expert,
    I would like to consult your expertise on the following issues: Bank Key, Bank Number and SWIFT code.
    In Country Field Check, OY17, If I select the bank key (section key for bank directory) options 4, assigned externally; then in FI01 bank key data creation, my bank number (in control data section) can be freely defined.
    If in OY17, my bank key option is 1, bank number.  Then, during FI01 bank data creation, my bank number must be same with bank key.
    My question is that:  I would like, in OY17, selection option 4, but I would like to have some clarifications on FI01 bank creation as well as electronic bank statement ( section of: Assign bank account accounts to transactions types):  In the section of Assign bank account accounts to transactions types, I need to fill in bank key+bank account and transaction type.
    My Questions: during MT940, electronic bank statement (EBS), since I set bank key + bank account, what control data (in FI01 screen) that SAP will use for automatic EBS?  Bank number or SWIFT code?
    Besides that, I am not quite understand statement by SAPPress book, Quick Reference Guide Financial Accounting with SAP - Chapter 7 Banking, as follows:
    If you use the SWIFT code as bank key in a specific country, we strongly recommend that you set the bank data flag on the further checks section in OY17.  This ensures that the system automatically performs the formal control on the SWIFT code entered in the SWIFT code field (BNKA-SWIFT), and not on the SWIFT code entered in bank key.
    Thanks in advance
    sbmel

    Hi,
    House bank is the bank through which your company is dealing all their financial transaction.
    Bank key is a country unique number in the US it is called the ABA routing number.
    The account ID is a user definable field that allows you to "name" your bank accounts at your bank using any convention you prefer.
    Bank master data means all the data related to a particular BANK .examole HDFC all the information related this particular bank.
    House bank master data  it is related all your bank master data.Example,Hdfc,ICICI,Axis ,BOB  etc.
    The S.W.I.F.T. code is used for identifying banks in international  payment transactions.Uniquely identifies a bank throughout the world.
    Bank number is a code given to a particular Bank.
    regards,
    Santosh kumar

  • IBAN and SWIFT codes in IT0009

    Hi Folks,
    I have been asked to add IBAN and SWIFT codes to IT0009 for various countries on the ECC system. I have activated IBAN in the img which has resulted in a push button for the IBAN's but is there a way to get the SWIFT code on the screen or is this set in Finance somewhere?
    Many thanks and points rewarded for correct answers!
    Danny boy

    I had figured out that from checking the help but thanks for your response - the SWIFT code can not be held directly on IT0009 as far as I can see using the standard screens.
    Many thanks,
    Dan

  • Vendor Mass Maintenance

    Hi,
    I would like to do Mass Maintenance for 2000 vendors in my Client's system. I have to update the Telephone number field of General Data in Vendor Master.
    These vendors are created for different Company codes and a Single Purchasing Organization.
    I believe we can do Vendor Mass Maintenance through the Transaction code XK99 in standard SAP.
    Can anyone please provide me the steps for executing the Vendor Mass Maintennace.
    Its a High a Priority issue, and would be glad if I can get an immediate reply.
    Thanks in Advance,
    Pavan

    HI,
    the vendor mass maintenance is very useful for maintaining large numbers of vendors with the same data.
    So if you are adding the same telephone number to every vendor then this is easy and can be done in seconds, but what you want (I believe) is to maintain different data (i.e. phone numbers) against each vendor.
    To do this you should use LSMW or CATs scripts or similar, that way you can use a spreadsheet with the numbers and get the program to populate them correctly, with one run of the program, automatically.
    Steve B

  • IPhone Developer Banking/Tax Form issues:  W8BEN, GST506E and SWIFT CODE

    Hey guys,
    I am new to this entire iphone development thing and having a hard time with this whole Banking/Tax Information process. I have a few questions I'd like to ask:
    1) I cannot for the life of me see a link anywhere on iTunes Connect to fill out an SS-4 or a W8BEN. Many have done so and even Apple's FAQ includes instructions and locations of these links for the forms. The FAQ also states that the W8BEN form must be done through Apple if being completed the first time and then mailed to update. I have looked all over but could not find it. I have heard rumours on other forums that W8BEN is no longer needed. Can this be confirmed?
    Does anyone know if I am still required to fill the W8BEN form out?
    2) Regarding the GST506E form, I have filled out the Legal Name portion with my legal name (including middle name), which I use for most of my legal documents in Canada, however my paid contract has already been electronically signed with my name (without the middle name). Will this provide an issue to the entire process?
    3) Similar to the missing W8BEN form, I did not find a place to enter my SWIFT CODE when filling out the banking information. At the moment the Banking info is frozen in place for "24 hours", waiting for the tax forms to come in. Is this still necessary?
    4) Does Apple have a number I can reach them at with regards to these issues I am having? The only place I can turn to is [email protected], but these guys have not emailed me back in almost a week. I have also tried [email protected] and [email protected], no luck either.
    I apologize for the long post, but this entire process is getting too frustrating and I am hoping someone here know the answers.
    Thanks for reading my post!
    Peter

    Thanks a lot for your post! I've been worrying they did not receive my info since they did not reply in any way. We'll see once the next payments come. I think they at least should have emailed me confirmation that the message was received. The same way they work with technical requests.
    Still. Does anyone know what to do about corespondent banks info?

  • Updating SWIFT Code in Vendor Master with IDoc

    Hello,
    I am facing the following problem.
    We are using IDoc CREMAS04 to update vendor master data. Now we also would like to use the SWIFT code. I have seen that there is a SWIFT field in the IDoc in segment E1LFBKM in the CREMAS04 IDoc. However the SWIFT field in vendor master data is still empty after transferring the IDoc.
    Any idea why the value in the SWIFT field of CREMAS04 IDoc is not transferred to the vendor master data? Are there any other approaches I could follow?
    Thank you so much for your help!

    Hi Florian,
    Not sure if this will answer your question but the swift code is part of the bank master and not the vendor master.
    You can check via de Bank data button in de vendor master or via FI03 for the specific bank country and bank key fi the Swift code is in there.
    If not or you already checked the above this answer will  be no help and i think you really have to debug/analyze to see what goes wrong.
    Regards,
    Mike

  • XK99 Vendor mass maintenance

    Good morning,
    My request is very simple - I work in an environment where General data and company Code data are already created for vendors.
    MM module is going to be installed and I would like to create the Purchase Organization view of the vendors with XK99 transaction.
    It works fine in test environement except the payment condition data (data LFM1-ZTERM).
    I would like to automatically copy  the payment condition data of the company code view (data LFB1-ZTERM) to the purchase organization view    (something like LFM1-ZTERM = LFB1-ZTERM)
    Is there a way to do that? use of rules with ABAP coding ?
    Thanks in advance for your responses.
    Didier GOBLET.

    Hello,
    I understood your cases but you can not do substitution while changing master data like LFM1-ZTERM = LFB1-ZTERM.
    But as you said, you can write some ABAP code update LFM1-ZTERM with LFB1-ZTERM if you don't want to use LSMW.
    Do you have ABAPer ? Need any help for this code ?
    Regards,
    Burak

  • Verification of the existence of an email account and reading it through a procedure?

    Good afternoon,
    I wonder if there is any possibility of verifying the existence of an email account through a procedure?
    And there is also the possibility to learn to read a particular email and store in a temporary table.
    Thank you

    That's not possible.
    Many mail servers are configured not to send bounce messages if an invalid email address is specified.  If a mail server allows a bounce message, it becomes easy for spammers to compile a list of valid email addresses for the domain by trying various common combinations (i.e. [email protected], [email protected], etc.).  So you can't do it across every possible valid email address in the entire internet.
    What is the actual problem you are trying to solve, though?  It seems highly unlikely that if you have email addresses that are part of an ERP that you really need to do this blindly.  What do you use the email addresses for?  Does the recipient have some reason to want to receive the emails that are sent to that address?  If so, it would generally make sense to let the recipient verify the address periodically.  On sign-up, assuming you are dealing with individuals outside of your company, you can send them a confirmation message that contains a link they need to click on to activate their account in order to verify that the email address they are providing is correct.
    Justin

  • Email id and company code relationship

    Hi Experts
    How to find particular email id is belongs to which country. Is any table or FM availabe to find the company code, email relation.
    Pls help

    Hi Kumar,
    I assume you must have created customer master (XD01) and added email id for this customer. If this is the case you can go to table KNB1 and get the list of customers under company code and after getting this customer you can get their email id in ADR6 table.
    Once you get the customer from KNB1 pass this customer to kna1 and get the ADRNR field from there and now
    pass this adrnr to ADDRNUMBER of ADR6 and fetch smtp_addr to get the email iD.
    Regards,
    Pawan

  • My client wants me to setup email address through BC. Please can someone advise me how to obtain new email addresses and manage it through BC? And sorry if it's been asked before...

    Sorry, I'm new to BC and need to establish the best way to obtain and use new email addresses for my client. The site is created in Adobe Muse and I wish to host it with BC. THANK YOU!

    You need to be on an upgraded BC plan to at least a webMarketing plan to be able to set up email with it. I don't recommend the BC email anyways. Here is a blog article I wrote some time ago on getting around the BC email limitations.

  • Company code and Purchase Org during vendor registration

    Hi,
    I have one enterprise context, with many company codes and purchasing org.
    I am aware that vendor master data is at enterprise level in ESO. However while integrating to backend i need to capture the relevant co code and Purchasing org.
    When the Purchaser wants to create a vendor, there does not seem anyway to enter which Purchasing org and company code the vendor should be created for.
    Need your suggestions for the following options
    1) capture co code and Purchasing org on bespoke fields and then in PI, pass these values to Co code and Purch org resp
    2) create company contexts - would this resolve this? what are the implications if one vendor needs to be extended to multiple co codes
    regards
    Subrote

    Hi,
    Have you imported integration config workbook.
    As part of ECC integartion  guide we have couple of workbook and XML needs to integrated, which will create all the required extension for vendor master and vendor registration.
    Once you imported the integration workbook, you will able to see the company code and purchasing org screens in vendor master.
    Thank you,
    Mani

  • RFWT0010 withholding tax type and tax code change in vendor master problem

    Hi
    Due to some reasons I need to change the withholding tax type and tax code in vendor master.
    When i am running the report RFWT010,After changing the tax type and tax code in vendor master...the list contains no items. eventhough there are 14 line items for the vendor that are required to be adjusted with new tax type.
    Please suggest how to solve this query.
    regards
    yesap.fico

    Any inputs?

  • MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS - T CODE

    Dear Experts,
    Is there any separate t code available to  MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
    I got this POINT from ECC 6.0 features in Solution browser.
    Please help me on this.
    MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
    Functionality Enhancements
    Provides a specific transaction for mass maintenance of material related excise duties fields
    Business Benefits
    Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
    Regards
    Soundar.G

    Dear Ravi,
    I have already created LSMW for this in Material master and J1ID.
    But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
    Regards
    Soundar.G

Maybe you are looking for