Email id from SU01 tcode

Hi Guys,
I am trying to get email id in SU01 tcode. I don't find it in USR* tables.
Any FM available to get it.
Thanks

Hi,
     Instead of FM use below 2 select statements to get the Email address
SELECT SINGLE addrnumber persnumber FROM usr21 INTO (lv_addrnumber, lv_persnumber)
                                                              WHERE bname = lv_user.
SELECT SINGLE smtp_addr FROM adr6 INTO lv_smtp_addr
                                                  WHERE addrnumber = lv_addrnumber
                                                   AND persnumber      = lv_persnumber.
Regards
Bala Krishna

Similar Messages

Fetching Email-Id from ZTABLE.

Dear All,
I have a requirement in which i have to fetch email-id of users from a Z-table based on workcenter (for Tcode IW31/32) value.
The Z-table contains the Workcenter - Email Id combination.
I have the work center value in my workflow container using the BO BUS2088, now how to fetch the email-id from the Z-table at runtime?
I thought of using a rule which in turn would call a FM and in FM I was fetching the value, but the Email-ID fetched is longer than the standard return parameter - ACTOR_TAB-OBJID (only 12 characters long).
How can i achieve this feature of dynamic assignment of email-id based on the value from Z-table ?
Kindly assist.
Thanks.
Saurabh.

Could you please explain what is PA0105-USRID_LONG ??
And i am trying all sorts of approaches to pass data from WF container to my task, but not getting success.
I even created a class YNEWCLASS with a method YGETDATA and 2 parameters- ACTUALLYPROCBY to take workcenter value from task to method and EMAIL to send the value back to task. but while putting the value for OBJECT CATEGORY for task ( where I select ABAP Class and give class and method name) it gives an error - Interface implementation IF_WORKFLOW does not exist.
I tried using the BOR object method also but in that I am facing type mismatch while binding the task and WF.
Any helpful material from where I can learn how to pass data between WF container and task and vice-versa.
Thanks,
Saurabh.

Table name from a tcode

Hi All
Can anyone tell me if we can find out from a tcode which are the tables it is accessing.
For example if we take SU01 as an example. Can we find out which are the tables this t code is reading / updating.
Thanks

Yeah. Like mentioned above, you can use ST01 or ST05 to setup a trace that will show which tables are accessed. I would recommend running ST01 on your dev system and setting a filter for just your account.
Hope that helps.
J. Haynes
Denver

RSWUWFMLEC - Read email address from PA0105

Hi all!
We (working on SRM 5.5, Add-On-Installation) are using the report RSWUWFMLEC to send mails in the approval workflow to inform about new workitems.
Unfortunetly the report read the email address from the SU01 user. But we need the email address contain in infotype 105 (table PA0105, USRTY = '0010').
I wonder if there is a alternative to the report RSWUWFMLEC that reads HR data?!
greetings,
Florian

We made an adjustment between HR and user data.

TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

ICloud emails sent from apple mail or iPhone 3gs never arrives, works fine when sent from iCloud website

The ony place I have been able to send and receive email since the launch of iCloud has been the icloud website. I wasn't able to send email from my iphone 3gs or apple mail at all until today, now it finally appears to let me send email but it never arrives to its destination.
I can send an email from the icloud website without issue, and email sent from my icloud account using my iphone 3gs and apple mail seems to send fine and without error but who knows where it goes.
Has anyone else experienced this issue?
Thanks!
Charles

I figured out how to fix it... if anyone else has this problem, go to Outlook > Preferences > Accounts > select the IMAP account > Advanced > Folders and for "Store Sent Messages in this Folder:" select "Sent Messages (Server)."

I chged my internet provider and new email address and cloud is not recognizing this chg. i deleted my old email acct from ipad and added new acct and since then i cannot send email nor the cloud will recognize the new email address. do i need to sync

i chage my internet provider and therefore email address. i deleted my old email address from my ipad and now i am not able to email from new email address nor will i cloud recongnize my new email address which is my apple id now. since i deleted my old email acct the cloud is not allowing me to chg this address in settting. the cloud still has my old email address listed.

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server" can't see to figure out why it stopped sending now.

I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server" cannot understand why this is happening and have not been able to fix. Now when I try to send pictues even to another email address I am getting the same message.
Help.

Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11

I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???

I cannot email photos from within iPhoto (v. 9.5.1). When I hit send I get a message: "Your email did not go through because the server did not reply." This happens for both my iCloud account and my Shaw account. What to do???

Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Emails to/from server always bounce to some domains

Sorry if I'm posting this in the wrong place. I've wasted 2 full days and sporadic time throughout the last 3 weeks on this.
I recently migrated a site from Server 2003 to a new Windows Server 2008 server. Ever since the move, my emails to and from my email address bounce from the server. I've spent 3 weeks with tech support on both ends getting nowhere.
Here's a rundown of the problem and what I've done about it:
Problem 1: Email from my domain (call it mydomain .tld) sent to the new server (call it serverdomain .tld) always bounces
Emails sent from mydomain .tld to serverdomain .tld get bounced back INSTANTLY with the error "550-The mail server could not deliver mail to "user@ serverdomain .tld". The account or domain may not exist, they may be blacklisted, or missing the proper
dns entries."
Problem 2: Email from serverdomain .tld sent to mydomain .tld always bounces
Emails sent from serverdomain .tld directly to mydomain .tld always bounce back after a 5-10 second delay with the error "550 Sender verify failed."
All emails were sent directly from server to server using webmail interfaces.
Possible problems/solutions I've explored:
Spam Filtering:
The new server's mail server (SmarterMail 2010) has spam filter bouncing disabled. No blacklists or greylists are defined.
The server hosting my email account is a shared hosted server, so I don't have access to its spam settings, but I have been assured by their technical support that the server's IP address is not blacklisted or blocked in any way.
Blacklist tests at MXToolBox.org all come up clean.
SPF Records:
I have defined an SPF (TXT) record for the domain "v=spf1 ip4:xxx.xxx.xxx.xxx -all", which points to the IP address of the mail server / web server. I do not have a type (SPF) record as Windows Server doesn't have an option for this type of record.
SPF test passes without errors at www . kitterman.com/spf/validate.html. Test email through spf-test@ openspf.net returns no errors.
Reverse Lookup:
I have a working reverse IP set up and is confirmed by checking it at ipadmin.junkemailfilter.com/rdns.php that points back to serverdomain .tld.
Testing through Telnet actually works:
I followed the steps at technet.microsoft.com/en-us/library/bb123686.aspx to log into the SMTP server on the new server's end and was able to successfully send an email manually to the new server, even using the same email address that keeps failing to send
directly to the server.
Some observations from the logs:
When sending email from mydomain .tld to serverdomain .tld, NO LOG ENTRIES are created at serverdomain .tld. This leads me to believe something is blocking it before it ever connects to the server.
When sending email from serverdomain .tld to mydomain .tld, the following log entries are created:
13:02:50 [60055] Delivery started for user@ serverdomain .tld at 1:02:50 PM
13:02:53 [60055] Skipping spam checks: No local recipients
13:02:56 [60055] Sending remote mail for user@ serverdomain .tld
13:02:56 [60055] Initiating connection to xxx.xxx.xxx.xxx
13:02:56 [60055] Connecting to xxx.xxx.xxx.xxx:25 (Id: 1)
13:02:56 [60055] Connection to xxx.xxx.xxx.xxx:25 from xxx.xxx.xxx.xxx:65260 succeeded (Id: 1)
13:02:56 [60055] RSP: 220-mydomain-host.tld ESMTP Exim 4.77 #2 Wed, 24 Oct 2012 13:02:58 -0700
13:02:56 [60055] RSP: 220-We do not authorize the use of this system to transport unsolicited,
13:02:56 [60055] RSP: 220 and/or bulk e-mail.
13:02:56 [60055] CMD: EHLO serverdomain .tld
13:02:56 [60055] RSP: 250-mydomain-host.tld Hello serverdomain .tld [xxx.xxx.xxx.xxx]
13:02:56 [60055] RSP: 250-SIZE 52428800
13:02:56 [60055] RSP: 250-AUTH PLAIN LOGIN
13:02:56 [60055] RSP: 250-STARTTLS
13:02:56 [60055] RSP: 250 HELP
13:02:56 [60055] CMD: MAIL FROM:<user@ serverdomain .tld> SIZE=951
13:02:56 [60055] RSP: 250 OK
13:02:56 [60055] CMD: RCPT TO:<user@ mydomain .tld>
13:02:57 [60055] RSP: 550-Verification failed for <user@ serverdomain .tld>
13:02:57 [60055] RSP: 550-The mail server could not deliver mail to user@ serverdomain .tld. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries.
13:02:57 [60055] RSP: 550 Sender verify failed
13:02:57 [60055] CMD: QUIT
13:02:57 [60055] RSP: 221 mydomain-host.tld closing connection
13:02:57 [60055] Bounce email written to 851023860056.eml
13:02:57 [60055] Delivery for user@ serverdomain .tld to user@ mydomain .tld has completed (Bounced)
13:02:59 [60056] Delivery started for at 1:02:59 PM
13:02:59 [60055] Delivery finished for user@ serverdomain .tld at 1:02:59 PM   [id:851023860055]
13:03:02 [60056] Skipping spam checks: Internally Generated Message
13:03:05 [60056] Starting local delivery to user@ serverdomain .tld
13:03:05 [60056] Delivery for to user@ serverdomain .tld has completed (Delivered) Filter: None
13:03:05 [60056] End delivery to user@ serverdomain .tld
13:03:05 [60056] Delivery finished for at 1:03:05 PM   [id:851023860056]
Configuration:
The new server uses Windows Server 2008 for DNS.
The mail server is also hosted at the same IP as the DNS server.
DNS Records for Serverdomain .tld:
[All xxx.xxx.xxx.xxx IP addresses point to the server's IP address]
Forward Lookup Zone: Serverdomain .tld
(same as parent folder) (SOA) 57, servername., hostmaster.
(same as parent folder) (NS) servername
(same as parent folder) (MX) [10] xxx.xxx.xxx.xxx
(same as parent folder) (TXT) v=spf1 ip4:xxx.xxx.xxx.xxx -all
* (A) xxx.xxx.xxx.xxx
mail (A) xxx.xxx.xxx.xxx
mail (MX) [10] xxx.xxx.xxx.xxx
mail (TXT) v=spf1 ip4:xxx.xxx.xxx.xxx -all
ns1 (A) xxx.xxx.xxx.xxx
ns2 (A) xxx.xxx.xxx.xxx
www (A) xxx.xxx.xxx.xxx
Reverse Lookup Zone: xxx.xxx.xxx.in-addr.arpa (syntax of IP is backwards, does not include last 3 digits)
(same as parent folder) (SOA) 10, servername., hostmaster.
(same as parent folder) (NS) servername
xxx.xxx.xxx.xxx (PTR) Serverdomain .tld
I'm totally at a loss. This is not just blocking email to/from me, but it has blocked email to at least one other domain name as well. I can get no useful help from tech support on either end.
(I had to put spaces in all links in this post because it wouldn't let me post links. Also, this forum crashes every single time I try to post in IE9, but works fine in FireFox. How ironic is that...)

I can only help with Exchange, but generally speaking, that line;
13:02:57 [60055] RSP: 550-The mail server could not deliver mail to user@ serverdomain .tld. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries.
Mean the server checked the GAL (it's global adress book) and it refused it. It's usually a simple antispam and antirelay configuration. The strange thing is the log after, that the email is received...
That lead me to think the antispam software/hardware is badly configured, and for a reason X, it does not block the email from passing by it's filter. So yes, their answer is correct, but that mean all email is filtered in some way, so it's not
correct in some way too.
Does they configured your domain alias correctly and such basic information ? I have a big doubth at this point.
Run some wireshark to be sure the problem is not in your CIE, and after pass that to their IT's tech, if the email is sent correctly, and you receive a server answer back, then something in their config is not ok.
Don't forget that if the packet X is sent on your WAN to their datacenter, they are responsable for the correct receiving when it enter their datacenter.
(edited: A last point; don't forget they HAVE to run a antispam's box, as the MX is the same IP, so basicly the antispam box dispatch the email to the correct server (like check
https://www.barracudanetworks.com/ns/downloads/Setup_Guides/Barracuda_Email_Security_Service_SG_US.pdf) you will see what I mean, a list of domain and server)
MCP | MCTS 70-236: Exchange Server 2007, Configuring
Want to follow me ?  | Blog:
http://www.jabea.net | http://blogs.technet.com/b/wikininjas/

How do you delete an email address from your iPhone that's not in your contacts?

How do you delete an email address from your iPhone that's not in your contacts?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to email text from a text component in my applet on a the host server ?

How to email text from a text component in my applet on a the host server, back to my email address ?
Assuming I have Email Form on the host server.
Help will be appreciated.

You can do like below
=REPLACE(Fields!Column.Value," " & Parameters!ParameterName.value & " ","<b>" & Parameters!ParameterName.value & "</b>")
The select the expression and right click and choose placeholder properties
Inside that set Markup type as HTML
then it will highlight the passed parameter value in bold within the full xml string
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

HT3228 Why is it that when I delete an email message from an account on my iPhone it instantly disappears from the same email account on my wife's iPhone?

Why is it that when I delete an email message from an account on my iPhone it instantly disappears from the same email account on my wife's iPhone? We both have iOS7 and have imap email accounts.

not all mail providers sync the send mail part of the mail box
you can try to contact yahoo if this is the case with them

When I try to email documents from my iPad 2 it appears to send but never shows up in my sent box or in the receiver's email account. this has only been happening since the last update for my ipad. How can this be corrected?

Has anyone else had this problem? When I "share" documents from Pages or GoodReader via email It looks and sounds like documents have been sent but they never arrive and when I check my "sent" file, they aren't there. Very frustrating! I know I've sent them this way before and it worked so wondering if it's something to do with the latest updates to 6.1.3

Which email service provider are you using? You can install DropBox and share links to the files that way. When you snd to your self (cc or bcc) do the items show up? What file types and sizes are these attachments? Are you sending over WiFi or cellular connection? Try using more than one email account from a different provider (Gmail, yahoo, iCloud, etc) and see if it is email provider specific.

Email id from SU01 tcode

Similar Messages

Maybe you are looking for