Email notification in approval task not working

Hi Experts,
We are trying to use email templates, to trigger emails for role requests on Approval task as below.
As if we raised request to the role, It is triggering the Notification Task, executing the Log Notification task in Provisioning frame work, but not triggering Email, From notification switch task, it is going to Else statement as Unknown notification type instead of Email.
When I checked the table mxpv_audit_variables with the request audit id, no entry created.
Can please suggest how to fix this,
Many Thanks,
Jaya

Hi Chris,
Thank you very much for your reply.
We are forming the work flow like this.
First we are setting the Manager as approver.
If assigner=manager, it should do auto approval.
we configured auto approval.
but the problem is after auto approval, for notification we are writing a job, instead of using assignment notification.
is this possible to sent autoapproval mail without writing separate job?
Regards,
Jaya

Similar Messages

  • Email notifications on iphone 5 not working

    Email notifications not working on iphone 5 but worked fine on 4

    Hi, well I have been on chat line with Apple for hours today on this issue, finally being directed to a Senior Advisor.  The problem, after working through all the settings on my iphone since updating to 8.1.3, was in Settings, Mail, Accounts and Fetch New Data.  One of my email addresses (the one I use all the time)  had not got mail attached to it and manually fetch mail was selected and now it is ok, having added a new account to include the email address and fetch email every 15 minutes.  So all sorted now.  Thank you for your help anyway.  Much appreciated.

  • Email notification for instance activation not working - SAP BPC 7.5

    Hello Everybody,
    I have a problem with email notification in SAP BPC 7.5.
    I want to configure an email notification to whenever an instance is activated.
    I have followed one How-To guide and basically I have created and activated a template in SAP GUI with transaction se38 and a program called UJB_MAINTAIN_EMAIL_TMPL.
    Also, the web server was configured by systems admin.
    But still is not working.
    I am completely new with SAP BPC so I donu2019t know what more can I do to solve the problem.
    Hope you can help me.
    Regards,
    Nadine

    You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) of BPC which you are using.
    Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Customer Solutions Adoption (CSA) team

  • Email notifications for priority senders not working anymore

    I recently just received a replacement galaxy s4 from asurion. On my old s4, I was able to select a ringtone and vibration notification for an email address I had added to the Priority Sender List. With this new phone I have vibration selected and a ringtone selected for this priority sender, but it still comes in silent. I tried adding another one of my email accounts to this priority sender list with the same notification settings, and it too still comes in silent. My master phone volume settings are set to vibrate (for calls and text messages). Any suggestions as to how I can fix this? I have already tried pulling the battery, doing a factory reset, deleting my email account then setting it up again, as well as updating my overall phone software to Android 4.4.2 build number KOT49H.I545VRUNC5 (the latest software update).

        We appreciate you taking the time to contact us, prettycutejamie.
    The good news is that you currently have the lasest software version installed. You have also done quite a bit of troubleshooting. Does this only happen with email notifications?
    I take it the sound/vibe does work for the calls & texts?
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Email notification for FF Controller not working

    Hi Guys,
    I have followed the FF User guide and have successfully setup FF in out Sandbox system. I have created the RFC, background job, FF's ID with Roles assigned..all according to the User Guide.
    In the configuration table, I setup "Send FireFighterId Login Notifcation" to "Yes". Thuis should trigger an email notification to the Controller. However, being the Controller, I did not receive any email notification when a FF (the FF ID has the relationship to the FF ID Controller, with Usage Flag Inofrmation as Email) logs in.
    Anyone has any idea where I should troubleshoot?
    I check SCOT and SMTP was setup was ok.
    Thanks.
    Raymond

    Hi Guys,
    I trace back into the background job and I have the below (in the situation where a FF ID login to system to execute some changes).
    Job log overview for job:    /VIRSA/ZVFATBAK / 12341222
    Date                   Time         Message text                                                                     
    03.10.2008         12:34:12    Job started                                                                           
    03.10.2008         12:34:13    Step 001 started (program /VIRSA/ZVFATBAK, variant &0000000000010, user ID CUA_BATCH)     
    03.10.2008         12:34:24    Job finished                  
    As you can see, the job does trigger and the steps are executed.
    From the Job Spool via the above Job log:
    FirefighterID          Date         Time                 Server Name               Transaction Code
    FF_SD1         03.10.2008     11:33:26       hwuu0XX_GX1_XX
    FF_SD1         03.10.2008     11:33:28       hwuu0XX_GX1_XX                   SU01
    FF_SD1         03.10.2008     11:33:41       hwuu0XX_GX1_XX                                                       
    Thus, the above shows that the background job does log the activities for the FF ID used. However, I do not see any trace of email notificationa ctivities mentioned in the background job log, which states that an email was trigger.
    If anyone does have the same situation, I would appreciated that you can show me a copy of your background job log, so that I can see if the steps taken are the same for email notification activated for FF.
    Any suggestions?
    Need help before the weekend starts
    Raymond

  • Email Notifications for Collaboration Tasks are Not going to Lotus Notes

    Hello Everyone,
    Email Notifications for the Tasks in Collaboration are not going to Lotus Notes. We are working on EP 7.0 SP14 with external ITS and backend r/3 4.7.
    I performed all the configuration activities that are suggested in the below wiki:
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=61244035
    It was worked fine once for me when i perfomed the activities mentioned in the below thread:https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    But after restarting our Portal Server the Email Notifications for Collaboration Tasks are not coming.
    Could any one please suggest that we need to do any other configurations.Thank you.
    Regards,
    Sridhar.
    Edited by: Sridhar on Mar 18, 2009 12:14 PM

    Hi Sridhar,
    I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
    https://wiki.sdn.sap.com/wiki/x/g4KmAw
    Please see if it helps,
    Robert

  • Multiple email notifications for one task

    Hi Al,,
    I am getting more than one email notifications for one task in less than an hour. Please let me know if any one has ocem across this situation and got the solution.
    your remarks are highly appreciated with points!
    regards,
    theja

    Hi,
    Are you using this RSWUWFML2 program or Extended notification to receive the email notification.
    If Yes Choose 'One Message per Work item'.
    If no, tell me from where you getting the email.
    Regards,
    Surjith

  • Need Help of Sending Email Notification when new task assigned

    Hi all,
    How can we send a email alert notification for existing lead or new lead, when a new Task is assigned to particular person. Here in my requirement daily n number of tasks assigned to executives. So how can i send the same.
    Thanks in advance.
    Regards,
    Ratan

    Hi Ratan,
    It is not clear from your question whether you are trying to trigger the email notification for the task or the lead, but it doesn't matter. You'll need to write a WF for the Lead/Task and trigger it when a new record is created and then in actions select the email notification.
    Best of luck

  • Email notification for approval sent to all managers

    Hi everybody,
    an astonishing process occurs in the workflow, a shopping cart was sent for approval, waiting for the manager linked to the requester in organizational structure to receive an email notification for approval,
    unfortunately , in certain case the email is sent to all managers even if we did a control in the badi concerning the workflow according to their role and flag is_manager in the structure.
    Is there anyway to check the flow and try to debug it to understand the way the workflow build this email notification and furthermore how the managers are selected?
    I already passes through the FM RH_GET_ACTORS, I had a look on the report RBBP_OFFLINE_EVAL.
    Thank you in advance for your suggestions.
                             Best regards Mahmoud

    Hi Manoj,
    I check this note today but it 'sounds'  good.
    There are two other notes which are interesting adding to the previews one: 764068 and 636540.
    Thank you very much for your reply.
                          Best regards Mahmoud

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

    I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

    Push notifications, I believe, is only for iOS.
    If it is for iOS, take a look at Using Apple push notifications with Digital Publishing Suite | Adobe Developer Connection

  • Email notification in human task: How to customize email subject.

    Dear all community members,
    I am using email notification service in human task to receive email notification if task is assigned to me. I have configured email notification in human task & I do receive the email in my inbox as assignee.
    The default email subject is like [Action Required: TASK_TITLE], I want to remove this [Action Required:] from email subject.
    I tried setting <%null%> in Notification Header in .task file but the email subject is still has Action Required.
    Is there any way to customize email subject so that I can get rid of [Action Required:] [FYI] in email subject.
    Thanks & Regards.

    I believe this will help - http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_cust_res_bndl.htm

  • This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

    This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

    Actually, another person on the "more like this" had the right answer. It meant I had a notification for an invite that I needed to respond to.
    Hope this helps you as much as it helped me.
    D

  • My email verification for psn does not work...

    My email verification for psn does not work... [email protected] SORT IT OUT SONY.
    Have had a ps4 since xmas day and am still yet to use it.

    1. You must send access code to a phone number that can receive SMS
    2. You can only use one phone number per iPad; cannot share one number with two devices

  • Approval Template Not Working

    Hi Experts.
    I have activated approvals and have a simple approval template working (as a test) whereby AR Invoices exceeding a certain value require approval.
    I have also created an approval template whereby Purchase Orders require approval if they are over the users approval limit but under their manager's approval limit as defined in UDFs against the employee record.  This approval is not working.
    The approval is based on a query:
    select distinct 'true'
    from opor a, por1 b, oact c, ohem d, ohem e
    where a.docentry = b.docentry
    and a.canceled = 'n'
    and a.docstatus = 'o'
    and a.docentry = b.docentry
    and b.acctcode = c.acctcode
    and a.docnum = $[OPOR.DocNum]
    and a.ownercode = d.empid
    and d.manager = e.empid
    and (
         (b.u_budgeted = 'budget'and c.groupmask = 6
              and (a.doctotal-a.vatsum > d.u_budgetexpense or d.u_budgetexpense is null))
    or  (b.u_budgeted = 'budget'and c.groupmask = 1
              and (a.doctotal-a.vatsum > d.u_budgetcapital or d.u_budgetcapital is null))
    or  (b.u_budgeted = 'non-budget' and c.groupmask = 6
              and (a.doctotal-a.vatsum > d.u_nonbudgetexpense or d.u_nonbudgetexpense is null))
    or  (b.u_budgeted = 'non-budget' and c.groupmask = 1
              and (a.doctotal-a.vatsum > d.u_nonbudgetcapital or d.u_nonbudgetcapital is null)) )
    and (
         (b.u_budgeted = 'budget' and c.groupmask = 6
              and a.doctotal-a.vatsum <= e.u_budgetexpense
              and e.u_budgetexpense is not null)
    or  (b.u_budgeted = 'budget' and c.groupmask = 1
              and a.doctotal-a.vatsum <= e.u_budgetcapital
              and e.u_budgetcapital is not null)
    or  (b.u_budgeted = 'non-budget' and c.groupmask = 6
              and a.doctotal-a.vatsum <= e.u_nonbudgetexpense
              and e.u_nonbudgetexpense is not null)
    or  (b.u_budgeted = 'non-budget' and c.groupmask = 1
              and a.doctotal-a.vatsum <= e.u_nonbudgetcapital
              and e.u_nonbudgetcapital is not null) )
    The query will return the value 'true' if executed when the PO document is displayed on the screen, so I am happy with the query.
    I think maybe the problem might be on the Terms tab of the Approval Template because Total Selected Terms = 2.  I think this should be 1.
    There is a tick against Undefined Type under Term and I can remove this so that Total Selected Terms = 1, then I click on Update and OK - but when I go back in again the tick is back and Total Selected Terms = 2 again.
    Any suggestions would be very much appreciated.
    Regards.  Julie

    Hi.
    Thank you for your replies.
    The solution I worked out was to select the Term 'Total Document' as 'Greater than $1.00'.
    This enabled me to successfully de-select the last Term 'Undefined Type'.
    The Alert then fired successfully.
    Regards.
    Julie

Maybe you are looking for