Email notification wish

Is it possible to have your web team put the Message Board Thread subject into the Email subject when sending the notifications. My email bin is full of "NI Discussion Forums Subscription: 1 New Message". It'd be nice to see something like
NI Forums: "Email notification wish" - 1 New Message
Just a thought.
Brian Rose

You should post this to the Feedback on NI Discussion Forums board.

Similar Messages

ICAL Email notification, stuck on communication with email server

Hi,
I know there is a ton of of these iCAL issues...
I was able to get by some initial issues and now am stuck at the email notifications not able to send.
Sending updates to an external address starts this chain of attempts to contact the mail server to send out the update. It repeats the following two segments repeatedly.
My cal error log shows:
2010-09-19 16:54:12-0700 [-] [caldav_task] 2010-09-19 16:54:12-0700 [-] [calendarserver.sidecar.task#debug] Checking for tasks
2010-09-19 16:54:12-0700 [-] [mailgateway] 2010-09-19 16:54:12-0700 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost
2010-09-19 16:54:12-0700 [-] [mailgateway] 2010-09-19 16:54:12-0700 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
My mail access log shows:
Sep 19 16:48:52 beta dovecot[3149]: pop3-login: Disconnected (no auth attempts): rip=<iCAL Server IP>, lip=<Mail Server IP>
Sep 19 16:48:52 beta dovecot[3149]: auth(default): new auth connection: pid=20637
Sep 19 16:53:42 beta dovecot[3149]: imap-login: Disconnected (no auth attempts): rip=<iCAL Server IP>, lip=<Mail Server IP>
Sep 19 16:53:42 beta dovecot[3149]: auth(default): new auth connection: pid=20639
The attempts to send notifications do not reach the SMTP.
My settings are correct in the notification settings (I created in OD and confirmed POP/IMAP/SMTP settings with mail clients), both POP/or IMAP (either don't work at this point) and SMTP are using SSL.
The keychains com.apple.servermgr_calendar and .invitations both list the same system account with the password populated. The only difference is that .invitations carries the FQDN after the username ([email protected])
I had seen with the default com.apple.calendarserver, it did more or less the same thing...
From what I could research, the "(no auth attempts)" seems to suggest the gateway or mail server is not accepting the method or has all methods of authentication closed... However this shouldn't be the case, both mail server and ical have SSL use set in their respective settings...
*(I understand that caldavd.plist has the option to hold a plain text password... however this is not currently in my caldavd.plist and I do not wish to use it. My mail server is set to only work with MD5 however... Issue perhaps?
Any advice so I can catch up to where everyone else is stuck at would be pretty cool!

I attempted to use com.apple.calendarserver again, but it does not authenticate at all on the mail server.
Both my created and the com.apple. seem to be stuck in only being able to authenticate in PLAIN. I have given in on this and enabled the PLAIN authentication. From here the server log said com.apple.calendarserver had the wrong authentication. I don't see how this can be the case... (the mail server is a OD replica itself)
So I went into WGM and merely re-pasted in what I had recorded onto the local account. The WGM goes on and on about how this com.apple.calendarserver is only a local account, but I don't see any way to make an OD account (I'm not sure if this is even critical) anyway so I'll leave it be.
So now both email and normal across-OD invitations function.
On invitation replies however I get this message in the mail access log:
deliver(com.apple.calendarserver): Sep 26 02:54:12 Info: msgid=<[email protected]l.outsi dedomain.com>: saved mail to INBOX
Sep 26 02:54:12 beta push_notify[2709]: error: <iq id='10003' to='[email protected]/push_notify' type='error' from='pubsub.beta.mydomain.com' xmlns='jabber:client'><pubsub xmlns='http://jabber.org/protocol/pubsub'><publish node='/Public/IMAP/beta.mydomain.com/portnum/Mailbox/C8BA4F7E-6E65-4C97-8BCC-BC 3D28FAFE4B'><item><plistfrag xmlns='plist-apple'/></item></publish></pubsub><error type='cancel' code='404'><remote-server-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error></iq>
Otherwise it seems the SMTP sees the invitation reply and regurgitates back to the com.apple.calendarserver mail... What happens to it from there is a mystery.

How to cancel email notifications ?

I wish to stop receiving email notifications from mozilla

Click on the Profile link in the top right under the search box. Now click on the "My Account" link also in the top right to bring up the User Preferences page. Select "My Watches" to list all threads that you are notified of replies for. If there is anything listed there, select them by clicking in the check-box, then click on the "X" icon to remove them.
Edit: They don't appear to be listed there anymore. You can cancel them individually. On a thread that you receive notifications on, there is a link on the right hand side to stop receiving notifications for that thread.

How to Update the Subject of Email Notification in GRC 10 PC

Hi All,
I am trying to update the subject of email Notification GRC 10 PC ,But it not happening,Please provide me your inputs..
i followed as per below steps.
Step 1 -->Go to transaction SE91.
Step 2 -->Enter “SWU_NOTIF” for the Message class and click on the “Change” button.
Step 3 -->In this example, we choose Maint. In logon lang.
Step 4 -->The Message Maintenance View displays the subject New work items in SAP system &1.
Step 5 -->Update Message 001, “New work items in SAP system &1” to “New work item in SAP Process Control
Application &1”; and click save
still old subject is there in my received mail.Please find the below screen shot for Reference..
Please need your inputs..
thanks in advance.
Suresh

Hi,
Go to SE16
Select Table GRFNVNOTIFYMSG
Hit Enter and Will Take you to this screen.
Click Change
Select the Notification type you wish to change ,here I am chaning in AR Submit
Doubke Click on that. Change the Subject.
I have changed it as per my requirement
Addedd Request number and User first name
and Last name.
Save it .
Hope this helps you.
Thanks
KH

Email notification - how to change?

I have a data only 8330 and can't figure out how to change the email notification sound. Right now, all it does is vibrate. I was hoping I could mess around with it a bit and get it to ping or something. Also, is there a way to assign a different sound to different email accounts? Thanks in advance!!
Message Edited by lyncstar on 12-12-2008 10:50 AM

welcme to the frums!
I just wanted to add to what the guys above have already said. It is a fellow blackberrian wrote this on a post (Jsanders)
1. Select the Profiles icon
2. A box will appear where you can quick select between Loud, Vibrate, Quiet, Normal, Phone Only, and Off. If you wish to quick change the device profiles then select the one you want and exit out.
3. If you want to edit the tones assigned to the device applications then select the last option, Advanced
(some older models and OS 4.1 and below will not have the "Advanced" step--if Advanced is not present go directly to Step 4 below).
4. Select the profile you wish to edit. (Loud, Vibrate, Quiet, Normal (default), Phone Only, Off)
Note: on the 8100, 8800, and 8300 models: Do not click the trackball. Instead, click the menu key to the left of the trackball).
Note: The profile that is in use will say: (Active)
5. You will now see a list of all applications that can have a tone assigned (Browser, Calendar, Level 1 Messages, Messages ([email protected]), Messenger, MMS, Phone, SMS, Task ect..)
6. Select the application you wish to edit the tone / notification for
7. You can now edit Out of Holster and In Holster tones/ notifications.
a) Select between: None, Tone, Vibrate, Vibrate+Tone
b) Select the Tune you wish to use
c) Select Volume (options are Mute, Low, Medium, High, Escalating)
d) Select Number of Beeps (options are 1, 2, 3)
e) Select Repeat Notification (options are None, LED Flashing)
f) If set to Vibrate or Vibrate+Tone then select Number of Vibrations (options are 1, 2, 3)
8. Repeat a-e for each of the desired applications listed in 5 above
Nurse-Berry
Follow NurseBerry08 on Twitter

Need to stop Email Notification only from Compensation workbench

Hi All,
I Need to stop Email Notification only from Compensation workbench, if is there any possiblility kindly guide me guys as I am stuck up due to this.
Regards,

Hi,
I can see two CWB workflows - bencwbfy.wft and benssenrtfyi.wft. These are available under $BEN_TOP. You can open these workflows through the Oracle Workflow Builder and note down their workflow names. Thereafter, you can download the definitions of these workflows (most current workflows from the database) from the database through the concurrent program - Workflow Definitions Loader - which should result in the wft files on the destination you've provided running the concurrent program.
Copy those files from the server, and edit them locally using Workflow Definitions Loader to remove or redirect workflow notifications appropriately. Please be aware that this amounts to a customization so you should evaluate the impacts of doing this on your installation. Also, for CWB to support custom workflow, my understanding is that you need to be at Family Pack J or above (you may wish to validate this through Support, though).
Regards,
Rakesh

Testing email notifications

Will I get email notifications for this topic?

If you started a thread in testing you are
signed in to be notified . You have to unsubscribe
to the forum and the thread. while in thread look to right in little box click on the receive email notications should toggle, if it looks like this before clicking.
You unsubscribed from Forum in general by at top of screen and click on topic (in this example it would be Forum Comments)
You should see a similar window Toggle there and you will be unsubcribed from the Forum:
Now you will unsubscribed to the Forum.
Its done this was so that if you post in a particular forum you can set to stay subscribed to give thread without getting any other notifactions if you don't wish.

Auto provisioning users and send email notification to the users

I currently have CUCM 10.5 setup to auto register phones and I use Cisco prime provisioning 10.5 to auto provision the users.
Self provisioning is setup and users can call the IVR number enter the self service ID, which is their DN.
what I would like to do is send an email notifying the end user of their setup and how to use their telephony device Example (Self-service ID: 8888, auth code: 3333) is this possible from Prime Provisioning or CUCM.

Thanks Jamie
Wishful thinking I guess. It would have been seamless if they added that form of email notification to end users when auto provisioning. Anyways to get around that I used MS word mail merge and used the same spread sheet I used to batch provision the users to send the Self-service ID to the email contacts.

Asha 300 - Email Notification

I have an Asha 300 on O2.
It has 2 email accounts set on it, gmail and btinternet, both of which are sending and receiving.
Settings are for new email notifications to be received between 0700-2200hrs.
How do these notifications appear ?
Do i need to set the home page to show anything such as notifications or mail ?
I am not getting any notifications at all.
Thank you
Mat

Spent an hour at the O2 store today.
Give the staff their due, they did everything they could think of.
That said it was only things that i have previously done.
In summary
Emails from my two accounts are being pushed to the email facility on the phone, without delay.
Despite all the settings being put in place for new email notification on the home screen, it isn't happening.
This is clearly an issue with the firmware of the phone.
Worryingly, this is known and NOKIA "seem" to be doing nothing, not even acknowledgeing the fact.
As the user manual clearly states that this is a facility, are NOKIA in breach of contract ?
The sale of goods act clearly points in that direction, but the contract is with the phone provider ie the O2 shop.
I had my NOKIA 6230i for a hassle free 7 years ................ wishing i had not changed, as this was the only facility i really wanted in the new phone.
Can i also say thanks to those who replied to this post, and the private messages i sent.
Mat

Email notifications via Closing Cockpit

Dear Friends,
Our client wishes to implement closing cockpit in their ECC system. We do not plan to implement Financial Closing Cockpit as it requires additional license (additional cost). We wish to send email notifications as advance intimation to the user and subsequent message after completion of particular task. However this needs to be sent automatically as a preconfigured mail. Is this possible ? We have on EHP6 . Please share your views /suggestions/solutions.
Regards
Jayesh.

Hi Jayesh
The below document can help you on the same
FI - Auto Email Notification for Closing Cockpit
Thanks & Regards
Sanil Bhandari

C3 Email Notification Tone

I've tried successlessly to change C3 email notification tone. Does anyone know how to successfully solve this problem?

In profiles scroll down to email tone the pick one.if you have added tones and wish to use them you need to refresh the music player first.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

HT201303 turn off facetime email notifications

Everytime I log into facetime I get an email... How do I discontinue these notifications?

You are not addressing anyone from Apple directly. This is a user-to-user forum that Apple does not directly participate in. If you wish to turn off email notifications there is a link in the upper right of each thread you have posted in that will say "stop email notifications." Click that. You can easily find the threads you've participated in by pulling down Your Stuff > Discussions.

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Facebook Notifications and email notifications on ...

Hi
Is that possible Facebook Notifications and email notifications on sleeping screen nokia 808 like it had on N9..
On my 808 it shows only msgs and miscalls....any fix??
Thanks

not possible unless the app supports that behaviour. but email notifications and on notification lights has been broken on Symbian for a while, and as Symbian is in maintenance mode, is unlikely to see a fix, possibly ever.

Procedures and Email Notifications

boldEN*bold*
Hi everyone!!
In my BPM development, i'm trying to automatize the email notifications, based on due process periods. Also, I need to inform, based on the delay, some other participants that escalates the alarm message.
Is it possible to do it using an "E-Mail Notification" component that can be reused during all the process, even that the interval conditions and informed users varies upon each activity.
Is there another way to solve it?
Thanks
boldSP:*bold*
Saludos a todos!
En mi desarrollo BPM requiero automatizar el proceso de envio de email, al caducar ciertas actividades. Basado en ello, el tiempo de caducidad varia de acuerdo a cada actividad y al usuario, ya que varian tanto los intervalos de aviso, como los correos y su escalamiento en caso de demoras mayores a lo solicitado.
Pienso que es posible tomar un procedimiento especializado que permita ser reutilizado en este y otros proyectos, a pesar de que requiera parametrizar tanto los usuarios "base" y "escalados", como los intervalos de alarmas, durante el proceso.
¿ Existe otra forma de realizarlo?
Gracias,

I think I understand what you're after. I think you want to use the same escalation logic for all of your processes and instead of embedding this in every process you want something reusable. If this is not the case, read no further.
While you can do this, there are still going to be 5 things each process would still need to have inside of them:
<li> your process would need to set the "deadline" predefined variable to the intial timeout (2 hours in the future in your example)
<li> your process would need an Exeption Handler needs to be added with an Exception transition set to "Instance Expiration"
<li> your process would need an Integer instance variable "alertLevel" to keep track of the current level
<li> your process would need a String instance variable "currentlyAssignedTo" to keep track of who's supervisor you want to notify
<li> your process would need an Automatic activity with one line of logic inside it.
You could have the Exception transition leaving the Exception Handler activity go to a subprocess using a Subflow activity. This subprocess would send the emails, determine the new deadline interval, determine the new priority of the instance, look up the currently assigned user, manager and supervisor's email addresses and send the email(s). The subflow would have two input argument variables (alertLevelArg and currentlyAssignedToArg). In the Begin activity, these arguments would be mapped to corresponding instance variables. Inside this subprocess there would be an automatic with the logic to send the email to the user / manager / supervisor based on the alertLevel instance variable. This subprocess would pass back out through its output argument variables the new alertLevelArg, and new deadline (a time argument variable set to some time in the future based on the new alert's level).
Once the instance in the called subprocess completes, the output arguments need to be mapped to the original process's "alertLevel" and "deadline" variable. From the Subflow activity, you'd have an unconditional activity that flows into an Automatic activity via an unconditional transition. This automatic activity would have the single line of logic "action = BACK" so the instance is sent back from the Exception Hanldler's flow back to the activity inside the process it was in when the Instance Expiration exception occurred.
Avoid hard coding the values of "2" and "5" and "8" for the number of hours to have elapse inside your logic. Instead make them business parameters capable of being edited by an business owner.
Dan

Email notification wish

Similar Messages

Maybe you are looking for