Email Notifications from Standalone System
Hey gang...
I am still missing one step which I think is a very simple one. My workflows are being kicked off and populating just fine in the Workflow monitor, however, no emails are being generated. I have read several other postings that reference the Oracle Applications Manager, but since I am operating Workflow standalone, I do not believe I have this option.
We are running on Oracle 9i.
We have an SMTP server running but I am not sure that the Workflow is seeing it (the SMTP server was setup AFTER Workflow was installed). I have tried to feed an OpenConnection command within my database trigger to create the connection to the SMTP server (which I think is working...this is a shared SMTP and the other system is getting emails just fine) yet still no emails are going through for me.
I have written a procedure to populate the WF_LOCAL_USER table each time a new user is created in my custom app, and ensure that the correct email address is populated on that table.
I have read that the Notification Mailer is installed and defaulted when Workflow is loaded, yet I am not sure if the SMTP setting needs to be included somewhere in there, rather than having me feed it via script command. All of the documentation I have read kinda glances over this, leading me to believe that it is a one-time, relatively automatic function (that perhaps I somehow messed up).
I have until weeks end to get these emails firing so any suggestions or help on this matter would be GREATLY appreciated!!!!!
Thanks alot!!!!!!
( I apologize if this questions has been answered on a prior thread which I overlooked. If you could point me in the direction of that thread, I would appreciate it!!!!)
Message was edited by:
user527937
Hi,
I also use Oracle Workflow Standalone.
Can you navigate to Oracle Workflow Manager?
You can do this by using Oracle Enterprise Manager.
If you can make sure SMTP server is working right, than can you make sure that the Notification Mailer service is run. It is required if you would like to get the notification from email, otherwise it only available in Oracle Workflow Homepage - Worklist section.
You can check it in Workflow Manager.
Regards,
Buntoro
Similar Messages
-
How to get email notifications from facebook to open in the app and not in interent browser
I receive email notifications from facebook when someone posts to my wall or share something with me and when I click the link to open it, it goes to my internet browser instead of opening the facebook app. How do I fix this so the facebook app open automatically?
I just started a project to use AutoCAD files and Adobe.
For starters, I've been creating in AutoCAD LT 2015, then using the "Export" to PDF feature, then opening the pdf version in Adobe.
I'm still learning, hope this helps. -
How do I stop getting email notifications from Apple support. I have checked all the "no" boxes. Help!
https://discussions.apple.com/docs/DOC-3661
Message was edited by: deggie -
How to delete large number of email notifications from facebook
I have been receiving email notifications from facebook for years. I only know how to delete them one at a time. I now want to clean up my computer and do not know how to delete these unneeded emails. they number in the thousands.
Holding Shift while you click selected everything between two mouse clicks.
Using Ctrl you can fine turn what is selected by clicking on thing to unselect them
Got the idea? -
Sending email Notifications from BPM 11.1.1.5+FP
Hi all,
We're trying to send an email notifications from our process but we need to send HTML mails, not just plain text...
Any help would be appreciated.
Thanks in advance1. Configure the UMS Email Driver in Enterprise manager
2. onfigure the SOA Suite Workflow Notification properties
3. Restart the soa server
4. On the BPM Process, drag the mail notification from the notification category.
5. update the mail notification properties such as to address, title, and content etc.
For the configuration, please refer the following url
http://technology.amis.nl/blog/6019/configure-soa-suite-11g-for-sending-email-notifications-with-google-mail -
Incorrect time displayed in Lost mode email notifications from iCloud
Lost mode email notifications from iCloud displays California time, even though my iCloud setting is in a different time zone. Can this be changed? How?
Try going to Applications/Utilities/Keychain Access and delete the iCloud password.
Try running Keychain First Aid.
Keychain Reset
Keychain Issues - Resolve see post by Kappy -
Email notification from Activation Server
I've received an email notification from Activation Server ([email protected]) telling me that i have successfully set up my email account with my Blackberry and that i should begin to receive new messages in approx. 20 minutes...strange though, i set up my email account over a year ago and have been receiving emails without problem
Any ideas as to why i would recieve this message?I also received this messaage about 16:05hrs GMT+1 for both email adresses I have had registered for over a year.
-
How to stop email notification from apple support site.
how to stop email notification from apple support site. please inform me
If you know the thread or community that is sending you the emails you can go directly to those and skip the rest of this however if you don't remember or are still getting email after going to the community read on.
Stopping email from ths site can be difficult, it is a multi step procedure. See the link Stopping emails from ASC which Neil posted for all the details.
regards -
Problem in sending Email notification from BPEL
Hi,
i am trying to send email from BPEL using Email activity.Using SoaSuite10.1.3.3
i configured the ns_emails.xml file properly as below.
when i run the process, it is executing fine without any error.
but i am not receiving any mail.
even i applied patch set p6148874 also.
below pasted is the ns_emails.xml file.
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Oracle BPM</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>domain.com</SMTPHost>
<SMTPPort>25</SMTPPort>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>domain.com</Server>
<Port>110</Port>
<Protocol>pop3</Protocol>
<UserName>ckommalapati</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">Chandu@1205</Password>
<UseSSL>false</UseSSL>
<Folder>Inbox</Folder>
<PollingFrequency>1</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
Even i tried adding <AuthenticationRequired> details to the above and its not working.
i restarted the server after modifications.
i tried pinging the SMTP server of my domain, and its connecting successfully.
Could any one suggest me the solution for this problem.
is there anything extra need to be configured for this..?
Thanks in advance.Hi, ravigali :
Following are some steps I take to set Email notification in BPEL:
A important thing: get the right parameters of your Email server.
Step:
1. Alter ns_emails.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory), an example is as following:
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
EmailMimeCharset=""
NotificationMode="EMAIL">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>*Your Name*</FromName>
<FromAddress>*Your Email: ***@***.com*</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>*mail.***.com*</SMTPHost>
<SMTPPort>25</SMTPPort>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>*mail.***.com*</Server>
<Port>993</Port>
<Protocol>IMAP</Protocol>
<UserName>***@***.com</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">***</Password>
<UseSSL>true</UseSSL>
<Folder>Inbox</Folder>
<PollingFrequency>1</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
</EmailAccounts>
Note: the detail explain of every XML element is in http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#sthref324 (2.2.1 Configuring the E-mail Server)
2. Add the following property to wf_config.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory):
<property name="oracle.bpel.services.notification.publisher_interval" value="1" />
Then the BPEL server will send notification every 1 minute. More detail about this configuration to see http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/notif.htm#sthref1678 (14.2.1 Reliable Notification Service).
3. Re-start all SOA Suite services. (opmnctl startall)
After the BPEL process invoke any E-mail notification activity and if we can’t receive any E-mail notification, we need to check the BPELNOTIFICATION table (ORABPEL database schema). And delete any error data in this table, then correct the E-mail notification setting through above steps and re-start all SOA Suite services.
Thanks,
Melody -
Send email notification from ASA
Hello,
I'm trying to send e-mail notifications from Cisco ASA when a vpn, session, config events have occurred. My config is:
logging enable
logging timestamp
logging list email_notification level notifications class auth
logging list email_notification level notifications class config
logging list email_notification level notifications class session
logging list email_notification message 713049
logging list email_notification message 713050
logging buffered informational
logging asdm informational
logging mail email_notification
logging from-address [email protected]
logging recipient-address [email protected] level notifications
logging host Inside 10.10.XX.2 6/34003
logging permit-hostdown
but I'm receiving non expected message like:
<162>Aug 09 2012 11:41:51: %ASA-2-106006: Deny inbound UDP from 10.10.107.79/50258 to 10.2.107.54/161 on interface Inside
and I'm getting my mailbox full with about 600 emails per 10 min.
version:
Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"
FW-INT-01 up 107 days 10 hours
failover cluster up 107 days 10 hours
Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
please help
best regards,
Alcides MiguelHi Bro
You could refer to this URL https://supportforums.cisco.com/message/3686071#3686071 -
How can i send email notification from UCM?
Hi
I am new to this technology. I need to send email notification to the user's, whenever file is checked-in. What is the procedure to send an email notification let us take GMAIL from UCM.
1) Now I have installed UCM in my machine. Do I need to install any other software to implement this feature(sending email)?
2) I read it in a document, that configuration is needed in a config file in order to send email. What details do i need to give in these fields,
HttpServerAddress= ?
MailServer= ?
SysAdminAddress=?
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
3) Do I need to install any mail server? If so which software can i go with?? Is it possible to send email to gmail or yahoo acccount without installing mail server ???
Regards
RajYou will need to have an SMTP server of some sort that you can use. I think out of the box, you may only be able to use an SMTP server that allows anonymous sending or sending unauthenticated (e.g. an internal server). Any good SMTP server (that is not an internal server) would not allow this for security reasons.
Thus, I think if you want to use an external SMTP server such as Gmail, you will need to write custom Java code. See this thread for more information: UCM SMTP server Configuration
Jonathan
http://jonathanhult.com -
How to stop email notifications from this site??
I signed up here a while ago because I needed some help with software on my macbook. As it happens, ever since, I´ve been receiving approximatly one hundred email a day from this forum, general replies to peoples questions here. I have NOT signed up for that, and I have checked NO on all the email notification preferances here. WHAT can be done to stop this extremely annoing email- flow to my gmail? It can´t really be supposed to be like this??
Thanks
Hedda, NOI have done this, here are screenshots of what it actually looks like
As you see, I only have email notifications for my own two posts.. But I still recieve between 50- 100 email every day from the support communities on varoius posts and topics from other users. How can this be? If there is no other places to stop the emails, I need somebody to tell me how to leave this site all together, I can´t have my mailbox filled every day anymore, it´s very annoying.
Please say any of you can help, do you know if there are anyone that actually runs and manages this site that can be contacted about my issue? -
iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour?
Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal -
Email Notification from OIM 11g
Hi ,
Can anyone please explain in detail steps , how to configure /send notification from SOA . As i need to send notification to end user/manager etc..when an approval workflow is finished .
Regards
SidAssuming that you already have an SMTP Server stood up, it's fairly easy. I would visit this site: http://www.orafmwschool.com/gmail-notification-service/
From there, you can skip the whole configuration of the certificates since the example configures Gmail which is over SSL. Since you are only sending email out, just fill out the outbound information.
Sunny Tsang -
Email notification from workflow?
Dear all,
I am using EBS version is 11.5.8 and database version is 9.2.0.3. We are using workflow to send out email notification once the PO gets approve.
Now, we are going to change SMTPServerName(email server IP) let say from '123.45.66.10' to '999.88.77.66'. What can I change workflow setting so that the email notification will no longer send to the old email server IP, email should be sent to the new email server.
I have try to read lots of document in metalink and it is not working.
Does anyone encounter this before?
Best Regards,
AmyHi Amy,
I haven't use OAM before... where can I download it?*[Oracle Applications Manager 11i integrated with Oracle Applications 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=166115.1]*
*[Oracle Applications Manager 11i Availability|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=166762.1]*
You can refer the following documents to setup your workflow,
*[How-To Setup Workflow Mailer in an Oracle Applications 11i environment|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1]*
*[Configuring the Workflow Notification Mailer(s) in Oracle Applications Manager 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164871.1]*
*[Configuring the Oracle Workflow 2.6/11i.OWF.H Java-based Notification Mailer with Oracle |https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=268085.1]*
*[Example Of Configuring Workflow Java Notification Mailer With Oracle Applications 11.5.x|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=249957.1]*
Thanks,
Anchorage :)
Maybe you are looking for
-
BADI/User Exit for KE51 and KE52
Hi Experts, I am searchinf for a BADI/User exit In profit center master transactions KE51 and KE52 which should trigger when we activate the Profit center and after the data base committed as i need to send the changed profit center data to other sy
-
Hi everyone I've updated to IOS 7 and lost the Airplay, there is nothing in the control centre as the trouble shooting pages suggest how it should look, any suggestions please. Thanks
-
I'd like to be able to copy and paste metadata from one to many. I envisage it as a process similar to copying and pasting Adobe Camera Raw settings, with a Paste Special style dialog. Camera EXIF data would be excluded, but you'd be choose to paste
-
Adobe Reader X will not work.
I have downloaded and installed Adobe Reader X (10.1.4) to my new HP computer, running Windows 7 (64), several times. Each time it appears to have successfullly downloaded and installed. However, when I try to use it I get "Adobe Reader has stopped
-
I want to trade in my old edge 8gig iphone for a new 3g 16gig iphone.
Is this possible?