Email setup assistance required

Morning everyone,
I need some help in setting up my email (8900 Curve) with my work email server. First problem is that the work uses a Microsoft 2007 Exchange servers with kookies (what I've read that it's not possible to conect). Based on this do I need to be on BES or BES?
I've then tried to autoforward the mails from outlook to my phone, but this is also not working?
Any advise?

Hi There,
I think you mean to use BES or BIS??
Ok, BES is compatible with MS Exchange 2007, which allows your to have wireless email and also wireless sync with calendar and PIMS.  If you company has a BES already, simply have your BES Admin to add you onto it and obtain an activation password to activate it.
On the other hand, BIS mainly target individual users and supports: Post Office Protocol 3 (POP3) / Internet Message Access Protocol 4 (IMAP4) with Secure Sockets Layer (SSL) or non-SSL using standard ports:
110: POP3, non-SSL
995: POP3, SSL
143: IMAP4, non-SSL
993: IMAP4, SSL
Microsoft® MSN® HTTP (Microsoft® Hotmail)
CS2000 (AOL®)
Microsoft® Outlook Web Access 5.5, 2000, 2003, and 2007 using standard ports:
80: OWA, non-SSL
443: OWA, SSL
Refer to http://www.blackberry.com/btsc/KB05333
I am not sure what do you mean to autoforward mails to your phone?   For either BES or BIS service, mail are push to your device as a copy instead of autoforward
Message Edited by Forza on 07-06-2009 07:27 PM
If someone give you helpful hints, please click on Kudos.
If you issue is resolved, mark Accept Solution next to the resolution post.
Feel free to search www.blackberry.com/btsc to find your answers.

Similar Messages

  • Email setup solution required please?

    Hi, new to blackberry and done a silly thing when setting the phone up, pressed I want to use a work email with a blackberry Enterprise Server. Ok, I admit it, I am an **bleep**, but the question is how can I reset this email setup please. Any help would be gratefully recieved.
    Many thanks.

    Well, even if you did press that you were on a Enterprise server, and you are not, nothing should have happened since you can't be activated on one.
    You need the Personal Email Setup option icon, do you have that?
    Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
    You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
    So, call your carrier an inquire about having the BlackBerry Data Plan added to your account.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Email Setup Application for my Curve 8330

    I recently updated the desk top to the current verison. Under applications it shows email setup application required, but it will not let me set it up. Does anyone have any ideas on what I need to do?
    Thanks

    So what happens when you click on that icon?
    Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
    You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
    So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Email Setup Option Missing

    Hi All -
    I am in UK.
    I am the proud owner of an iphone, sorry I don't want the knives thrown.  I have bought my daugter ( refering to as me for the rest of the topic) the BB Curve 8900 at her request against my better judgement, without any disrespect to Blackberry users, each to their own.  I am use to things working out of the box or just a simple restore to factory and away you go.  There seems to be very little about how to maniplulate the Blackberry to the Users requirements.  Considering I own it!  I should be able to do with it as I please.  I am very computer litterate so what you throw at me in solutions, dont worry about the lingo.  That's it my rant and rave due to frustration is over, any assistance would be greatfully apreciated.
    My BB Curve 8900 badged as T-Mobile and unlocked.  Not sure on software but when I checked on line is was up to date.
    Bought brand new from a work colleague so no problems there.
    I am on vodafone with data plan.  The internet on my BB works fine and I can browse no problems.  I have phoned Vodafone customer services and got a feeling that 'ar*e and elbow come to mind'.  They said can you get the internet, I said yes, they said so what's the problem!
    On the setup email, I only have an option to join an exchange type server.  My friend has the exact phone but bought on contract from Vodafone, she has 'mobile email setup' .  I have looked through the internet and found the 'setup email help', as I have said I don't get any option other than joining a VPN type email.
    So please help me. what can I do, wipe it clean, re-install the software, my last hope would be to go to our local Vodafone shop and I get a feeling the my previous comment would come back in to play.
    Thank you for reading my ramblings.
    Regards and respect to you all.
    Tony

    Hi and Welcome to the Forums!
    To use the proprietary RIM Push email capability, you must have an adequate data plan from your carrier. The carriers host BIS for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you will then have Personal Email added to the email setup wizard.
    Further, since this is a second hand device, you should read this and ensure that the prior owner fully conducted all steps in the Seller section...if not, then your carrier will never be able to register a BIS account to the BB.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1338 I am trying to setup my external drive, but when I do, I get a box that pops up that says You can't open the application "LaCie Setup Assistant" because PowerPC applications are no longer supported".

    When trying to setup my external hard drive, I get this box that pops up and says this:
    You can’t open the application “LaCie Setup Assistant” because PowerPC applications are no longer supported.

    PowerPC was a type of processor used in Mac systems before Apple switched to Intel-based processors. These older chips required applications to be coded differently, to the extent that they will not run on the Intel processors in newer Macs. Apple used to include a translator that allowed these programs to at least run, but this translator is no longer available so if you run into an older PowerPC-based program then OS X will give you this error.

  • Problem transferring old iPhone 3GS to new phone 5S using computer.  The iMac which I've been using to back up 3GS for years does not seem to recognize the 5S.  No setup assist is coming on screen so I can't begin the transfer.  Any ideas for this?

    Problem tranferring old iPhone 3GS (ios 6.1.6) to new iPhone 5S (ios 8.1.2) through iTunes on my iMac computer  (OSX 10.5.8) . I have backed up the 3GS this way since purchase of 3GS.  The computer does not seem to recognize the 5S is there -- no setup assist is appearing on screen. Any ideas welcome.

    this may not be your problem my according to the tech specs on apple.com the 5s requires:
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 8; Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 11.1 or later (free download

  • Does Setup Assistant delete files on the new mac?

    I just got a new Macbook Pro, and I'm trying to decide how to transfer all of my files from my old computer to my new one. The problem is that I'm a little paranoid about losing any files on the new computer. I once accidentally wiped my entire system on the old one after an incorrect restore and lost several important folders required for certain applications because they weren't included on the OS reinstallation CD. I don't want that to happen again. I've been reading about Migration Assistant and Setup Assistant, and it seems like they do pretty much the same thing, but I want to make sure that any files currently on the new Mac aren't deleted if I use Setup Assistant to transfer my old files.
    Any advice for this particularly paranoid Mac user would be greatly appreciated. Thanks!

    Paranoia is understandable; however, misplaced. Just follow the steps in Pondini's Setup New Mac guide.

  • Help ! Going crazy : stuck with leopard Setup Assistant

    I've installed and used Leopard since its launch.
    Experienced some minor problems : iCal stopped when trying to open a Task... Bin could not empty on securized mode.
    Today, after the same problem, I had to force to reboot and now it's running to Mac OS X Setup Assistant again and again, as if it never got it.
    What can I do ?
    Thanks for your help.

    Casual_Tourist wrote:
    There are three key problems with this system:
    The skype reset only allows you to reset your Microsoft password - not your skype password
    You cannot receive skype support without logging into Skype
    It does not appear that the Skype team is monitoring the forum as there are many of these threads floating around unanswered
    I don't know if it's the first rule of website design, but people forget their passwords all the time. If you really want people to use your services, Microsoft, you should remove this ridiculous loop from your system.
    The most commong problem in all these cases is the following:
    A user signed up for Skype account "john.doe456" a few years ago using an email address [email protected]
    Later the user linked their Microsoft account [email protected] to the Skype account
    Now it's March 2015 and they try to reset their Skype account password and request a password reset using the [email protected] email.
    Users will always be forwarded to the Microsoft account password recovery. To reset the Skype account password you need to request the password recovery to the [email protected] registered email address of the Skype account. Many users have forgotten what their Skype account registered email was because they haven't updated them for long. In this case you need to contact Skype CS and get your primary account email changed. The starting point for this process is to fill out the form for "I don't know my registered email address" here:
    https://support.skype.com/en/faq/FA34537/i-don-t-have-or-don-t-know-my-registered-email-address
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Cant' find Airport Extreme Setup Assistant in Applications/Utilities

    My new Airport Extreme Base station - M8799LL/A requires setup using Setup Assistant, which I can't find on my laptop. Is there a place to download it?

    No, I see the airport utility.... what I can't find is the setup assistant ...... Perhaps this is because this ancient device is equipment I had to buy used?

  • Setup assistant doesn't appear!

    I bought an ipod nano a couple of hours ago and plugged the lead into the usb port but nothing happened. According to the booklet a setup assistant should have come up but nothing. I don't know if its charging either. I know you charge it up through the usb port but it doesn't seem to respond at all. What should I do?

    Look at the tech specs requirements for the new iPod nano. Here it is.
    http://www.apple.com/ipodnano/specs.html
    In your one post, you mentioned iTunes 4, what OS are you running on the PC? Look at requirements very carefully mate.
    Keep your spirits up! Go to a Pub (if you are old enough) and have a good ol' bitter.

  • Setup Assistant Freezes after installation.. cannot complete setup

    Hi - I recently installed an Apple DVD RAM drive in my 450Mhz B&W G3. As far as I know it meets the system requirements - it has 640MB RAM and built in firewire.
    Anyway, I was upgrading from OS 10.2.8 and I kept getting an error. So I ran the disk utility and sure enough, there was an error - and one that it couldn't fix. So I backed up all my files and decided to clean install, and it worked perfectly.
    Installation had no problems, and it got completely through to the setup assistant. Except, now it got to the "select keyboard language: English, Canadian or "view all languages" - when I select English and click "continue" it freezes. Sometimes I get the spinning colorful wheel, and othertimes, it just stays frozen. After about 10 minutes, it comes back to where I can click "continue again" When I do, the continue button goes grey and it just sits there idling again.
    Anyone know what the problem is or how to fix it? Thanks!
    Tim

    never mind, it simply needed more time - I left it for a few hours and came back and it finally made it to the next screen! Weird.
    Tim

  • Annoying email setup warning during roaming on 580...

    Guys,
    Does anyone know how to disable the message that pops up from the Email Setup program when the network changes (e.g.. During roaming) on the Nokia 5800 (FW version 50.0.005) saying "allow phone to use network to send and receive data".
    Basically if you go abroad and have roaming enabled you will often find the phone changes network, e.g.. I was just in Italy and it regularly roamed from Vodafone IT to I Wind and TIM. Each time it swapped network I got the email setup program displayed and it said "can it use the network" which required a response. Why?? No other application needs this constant interaction!
    It was especially annoying as I would be using the sat nav (so cool) but then while driving it would change network, then this message would be displayed which takes the focus from Ovi Maps so the screen blacks out, and locks (which seemed to stop the navigation instructions being read out even!).
    Please fix this Nokia!!!

    Any update on this from Nokia?
    I recently updated my 5800xm and I have the same problem now; in fact I wouldn'st say roaming changes anything, it happens all the time.
    I really like all the updates we get on the 5800; I think it adds a lot of credibility to the Nokia offering.
    But this bug should be resolved now. The only solution I have is to remove the mail setup application; not really a solution is it?
    Or I could disable it. Any idea how to disable an app on NOkia 5800?

  • Setup assistant in loop after leopard software update

    Installed leopard as an upgrade to Tiger on my new Imac when it was launched. I had no problems and everything has been runningfine. Last night I got informed of software updates available, I remeber seeing that one of the updates fwas for the system. I said ok. After a while I got a dialog saying updates required restart of system, hold power key until system turned off. I did so. The system rebooted into the setup assistant. I filled in the details required in each of the steps until I then hit done on the last page. At this point it just goes back to the beginning of the setup assistant again.I've tried this several times, inlcuidng turning off and starting the system again. I've tried holding down the C key at time of boot with the leopard disk in the drive to bbot from dvd and I still get the same symptons.
    Very bad experience. Anyone else seen this and got a workaround. Can;t get through to apple support.
    Cheers
    Iain

    I just ran into this nasty glitch on a mac mini running Leopard which I had just attempted to update using Software Update. The only package requiring a reboot was iTunes 7.6 which did FAIL to update along with one other package (I forget which). I told the system to reboot and gave authority to 'kick' others currently logged in. It complied and the screen went black, however there was no reboot sound....hmm...I held down the power button and still nothing. Then held it still longer and finally it rebooted...I logged in then immediately saw Setup Assistant. I was like "hmm...odd...this doesn't look good." After complying I clicked "Done" and then it logged me out (odd?), and then I logged in again only to find Setup Assistant greet me! So here I am..looking for answers on how to fix. Luckily I have SSH enabled and can login to the machine via SSH. Looking for a possible solution to run OS X Updater from command and possibly fix what's broken.

  • Will I still be able to use my software after using setup assistant even if I didn't get to deauthorize it in my previous (broken down) computer?

    My 2009 imac broke down (suspected motherboard and power supply failure) and I am planning to remove it's hard drive placing it in an external hard drive enclosure and using this with either setup assistant or migration assistant in an effort to recuperate my old files and software. However I am afraid I won't be able to use my software because of license restrictions etc. Do I have something to be worried about?
    Thx

    Probably not a problem. You didn't mention which software you were concerned about, but some of the ones that are the most fussy about licensing include those from Adobe and Microsoft. Do you have any of those?
    Adobe explicitly states that you should deauthorize on the old computer before installing on a new one (or migrating to a new one). But any issues you might encounter really depend on which versions of the Adobe software you have. I have migrated over older versions of Photoshop and Photoshop Elements and they ran fine on the new computer, even with the old computer up and running at the same time. The newer ones might check to see if the same serial number is running on more than one computer and tell you to deauthorize one of them. But since you aren't actually running the software on the old computer now, this might be fine.
    I recently migrated Adobe Photoshop CS4 from an older computer to a new one and it would not run on the new one until I completely uninstalled it there and then reinstalled from scratch. So you may need the install disks and serial numbers anyway.
    With Microsoft Office (2011), the migration worked fine but it required re-entry of the serial numbers on the new computer. If you run MS-Office on both the old and new computers simultaneously, it may notice that and refuse to run both at the same time. Again, not a problem for you since your old computer is not operational.
    In any instance, should you run into trouble, you can contact Microsoft or Adobe (or other companies for other software) and they will reset the licenses from their end so you can use the software on your new computer.
    By the way, if you use iTunes, you can do something like that from the iTunes Store, where you deauthorize all computers in order to get the old one off the list of authorized computers.

  • Lion setup assistant opens every time I log on...

    I just upgraded my iMac 3.06 Intel Core 2 Duo to Lion. Now, every time I log on, the Lion setup assistant boots up and requires me to "click to continue." Also, the iCloud preference pane opens up. This happens every single time I log on. I have tried to find out how to disable the screens from opening, but with no luck. Can anyone help me turn the buggers off?

    rkaufmann87, Thanks again for your reply,
    I had done the simple things previous to my last post - following your excellent advice on other threads.  I have tried again the methods you describe, starting in safe mode.  Also starting via the recovery disk and 'Repair Disk Permission' (done this about 6 times).  Unfortunately no change.  What is strange is the same mesage is displayed multiple times.
    "Permissions differ on system/library/coreservices/remoteManagement/ARDAgent.app/contents/support/remo tedesktopapp/contents/resources"
    "Repaired system library core services remoteManagement/ARDSmgmt.app"
    And running Repair Disk Permissions, the same repair is affected even when this was completed in the past repair scan.  It is as if the repair is not effective or there is a subroutine rewriting this again?
    The Repair Disk Option has been run multiple times with no fault found.
    I have even done a full install from safe mode, downloading the install file again from the app store but still have the same problem.  Settings not remembered and the set up assistant launches again with the System Preferences pane also displayed.  The MacBook also seems sluggish compared to the mac mini which had its Lion update and works just fine.  Thankfully ios5 devices, ipad and iphone work a treat, its just getting this MacBook sorted. 
    Can you advise my best course of action?
    I get the impression that I will neeed to backup my data and 'start again' with a disk format and clean install?
    Many thanks

Maybe you are looking for