Email sound not audible

No sound for email notification audible. Thanx. Phone and alarm so far used and audible.

Try looking in Settings, Sounds and make sure New Mail has an assigned sound. Default is none.

Similar Messages

On iMac email sound not working

On iMac email sound has stopped working. Red spot on notification icon in system preferences

Zap the PRAM and Reset the SMC, then try again.

HT1688 I have my phone right in front of me I5S and it's not on vibrate and It's intermintely not ringing, making the text sounds, or email sounds and it's settings are all fine. I took it to the AT&T store yesterday and there's nothing wrong with it

I have an I5S phone and it for some reason intermintely not ringing, no text sounds, or email sounds and the phone is not on vibrate or there hasn't been any setting changes other than I thought maybe I should down load the new 1OS7.04 to see if that corrects the problem and it didn't.

u have to touch your home butto slowly(don't push it).
and when your finger is wet or something like that your fingerprint wont work.
try to put your finger on the center of home button Because the side of your finger isn't work well.

"New in iTunes" newsletter contents received in iPad email will not produce sound. Any ideas as to why? If I go into the iTunes program, I get sound without any problem.

"New in iTunes" newsletter contents received in iPad email will not produce sound for music samples. Any ideas as to why? If I go into the iTunes program, I get sound without any problem.

Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything

Email sound does not change

I've recently upgraded my Iphone 5 til IOS 7.0.3 and I discovered that the sound for new email does not change when I change the setting in the controls.
Have anybody else experienced this, and what can I do to correct it?
Aparently alle other sounds can be changed - but not the one for new mail.
I'm getting very annoyed form the default ring-tone that is played evey time a new email is coming.

https://discussions.apple.com/message/23673157#23673157
Check above discussion link here in the Apple support discussions. Hope it helps!

Pulsing static sound is audible thru speakers or earphones, but not USB output.

Compaq Presario CQ532oF Windows 7 64 bit
Pulsing static sound is audible thru speakers or earphones, but not USB output. Makes listening to talk or music unbearable. This just started a few days ago. Volume control affects the volume. Does not matter if audio program is playing or not playing. Pulses are about 2 seconds duration - sounds like a phonograph record at the end of play where the tone arm didn't pick up.
Is this likely an amplifier problem? Is the amp on the sound card?

Hi vc329,
Doesn't sound like encouraging news, though it is odd that the sound came back for a short while at least. If you still haven't rebooted the PC since putting it to sleep and loosing the sound, then I would suggested going ahead and rebooting or even doing a full hard reset (power down, remove the AC adapter, remove the battery, hold down the power button for 20 seconds or so, then reconnect the AC power and Battery and boot up) to see if the sound can be recovered again.
If the sound still doesn't work, Check Device Manager to see if the sound driver still looks OK, make sure you are using the latest driver again (it looks like the latest driver is 6.10.6381.0), another option might also be to try the older driver that is still available from the site, or try recovering the original driver shipped on the PC. The steps to do these things are covered in the document listed below, in Step 6 (Restoring the Audio Driver), Step 7 (Updating the Audio Driver), and Step 8 (Checking Device Manager):
No Sound from the Speakers (Windows 7)
If none of that seems to help, I'd recommend testing the hardware using Step 9 in that document.
If the online warranty check sees you as out of warranty, you may still be OK if you have the original proof of purchase (receipt) from wherever you purchased the PC, but you may have to provide it when calling HP for service if the sound can't be fixed. If you are close to the end of warranty I'd recommend calling customer care for your area (I assume you are still in Asia) and validating the warranty with them as soon as possible just to make sure.
Although I am an HP Employee, I am speaking for myself and not for HP.

Sound imported but not audible

Imported quick time .mov file including audio - want to edit video
but can't hear audio. If send to iDVD - sound is there. When play .mov file in QuickTime - sound is there. Sound file is visible in
iMovie - just not audible. Any suggestions? Please advise. Running out of ideas.

Thought we had it licked Sue but NO. The next problem I encountered was when I put the "themes" on and clicked to burn the IDVD it said there weren't any clips, meanwhile they were sitting on the screen. I finllaly called Apple got someone who really didn't understan Imovie at all I think. Called back again after trying a few things on my own and was told that I probably had some corruption and to do a reinstall. Did that now it comes up telling me about 15 different plugins are missing. I'm in worse shape than before. Have no idea where the plugin are found. Gonna call Apple again when I have some time. In the meantime I just won't be able to edit.

Power On Self Test [POST] Sound - Not functioning

The following applies to a Mac Pro early 2008 8 core 2.8GHz Xenon with 8GB RAM 4 x HDD none of which is more than 50% occupied, running Mac OS X Lion 10.7.1.
The same scenarios also apply to my Lion Clone HDD, it is regularly updated to keep abreast of changes, unfortunately it seems to have updated to an unwanted change?
Like all others after completing the POST the Mac normally emits a ‘gong’ sound.
I need to be able to mute this sound on demand in the small hours of the morning to avoid complaints of excess noise, but the present issue has placed this on the back burner.
Under Snow Leopard I was able to deploy an Application which created a System Preference. In turn this enabled the sound to be muted. However this was not ideal because it required accessing System preferences before shutting down, or leaving the sound semi permanently muted.
After searching for and testing various actions apparently designed to achieve this objective nothing seems capable of the task. Methods involving the use of Terminal were avoided as that is not my bag.
If it had functioned hitting the Keyboard Mute Key on start-up would have been ideal, if this does work for anyone please tell me.
Whilst it is accepted that the default for the POST Sound should be for it to be heard. Unfortunately Apple choose to be deaf, dumb and blind to the need for a User selected method of silencing the POST Sound that reverts to default after a single use.
Having temporarily given up on silencing solutions and made a decision to smother the sound with a duvet, or something similar for early morning start-ups, by an eerie coincidence the start-up sound ceased. The first reaction was ‘success’, but this was short lived when considering the need to access the Start-Up Management Screen and other start-up choices.
Exceptions to the above:
a. Re-booting from my Snow Leopard HDD, used to run items which do not work under Lion, back to Snow Leopard the POST Sound is audible.
When restarting from Lion and booting into Snow Leopard the POST Sound is not audible.
b. The first boot into Lion after using Snow Leopard the POST Sound is audible, but subsequent start-ups remain silent.
The following scenarios describe the attempts to return the Mac to normal operation:
1. System Preferences > Sound, this was checked to ensure that none of the settings blocked the sound.
2. Disk Utility was used to Repair the Start-Up HDD and also to Repair Disk Permissions.
3. Resetting the NVRAM was carried out several times, I have read that this could be beneficially allowed to repeat the POST Sound 4 times, so this was tried as well as the Apple directions which advise holding the keys until 2 sounds have been heard.
4. The Logic Board Battery was replaced.
5. Apple Hardware Test was run and returned the result [words to the effect] ‘No Trouble Found’.
The above seems to indicate that the issue is with Lion?
At this point I have run out of options other than to perform a clean install and hope that the issue will be resolved.
Although I have adequate back ups returning to a position with all the Applications set up properly is going to be a major task.
Any suggestions or ideas to move forward with this problem will be gratefully received.

Just to round off the above scenarios and answer the outstanding items as far as possible.
The above taught me a little about ‘Migration Assistant’, I have never previously had any occasion to use it.
By setting it up as near, IIRC, the settings used after re-installing Lion were similar to this:
Most Applications were fully functional without any additional action being required.
Several Applications required their Serial Number-Registration Code-or whatever, to be inserted MS Office 2011 required ‘Activation’.
Adobe Creative Suite 3 Master Collection, allowed Acrobat to open but reported that it needed one of the other related Applications to be opened.
After a similar experience with Photoshop Adobe decided that it was necessary to uninstall and reinstall CS3 to regain usability.
Inserting CS3 #1 Disc and hitting ‘Install’ revealed the true requirement.
CS3 needed to be ‘Repaired’.
The uside of this was that almost immediately an estimate of Time for the process was given, and this started to count down second by second, and when completed there was no need to enter the Serial Number.
Apple could learn something about ‘Estimating Time to Completion’ from Adobe.
The downside was that this, effectively, new installation required almost 20 updates to be applied amounting to about 750Mb, unfortunately this took as long as most Applications would take to install several Gbs and even this resulted in some failures for some component parts. CS3 runs as a damaged product in Lion.
Adobe seem to need to learn more about working with Mac?
Regarding the ‘outstanding irritations’ mentioned previously:
Please ensure that you read to the end of this post, I am not trying to ‘sell’ anything by offering these links.
Searching for an Application to mute the POST Sound I visited:
http://alphaomega.software.free.fr/downloads.php
This developer produces ‘Start-Up Chime Stopper’, more info on this can be found here:
http://alphaomega.software.free.fr/startupchimestopper/Documentation/Documentati on.html
After eMailing the Developer and receiving, IMO possibly related to language difference, an open ended reply I took advantage of the Free Download in order to trial this poduct.
It was found to be functional but it does not seem to be capable of applying a Mute to the POST Sound for a single event, other than by User intervention.
In fairness I may have missed something but believe all combinations of the settings were tested.
The upshot was that I removed [read trashed] this Application.
Having removed the Application on restarting the Mac, horror of horrors’, the POST Sound was absent.
A quick dive into System Preferences > Sound > Output tab > Internal Speakers, revealed that the setting had been left on Mute.
With the Mute checkmark removed normal service was resumed.
Also I subsequently found that altering the Volume Level reduced the POST Sound to an acceptable level.
In my earlier searches for a solution to Mute the POST Sound the System Preferences > Sound settings had been set every conceivable which-way.
No solution was found and this lead me to criticise Apple for not providing a means to turn off this sound when there was a real need to do so.
There seem to be a few possible explanations for what is happening now:
1. I failed, earlier, to test EVERY possible Sound Setting.
2. My recollection of events is completely off the rails and brain fade has set in.
3. My Sound Settings were corrupt and repaired by the reinstallation of Lion, I did not retest prior to the trial of Start-Up Chime Stopper.
4. Installing and removing Start-Up Chime Stopper has altered something within Sound.
Please can anyone help to confirm any of these items?
In the meantime I am a happy chappie, I have to listen hard for the POST Sound but have the comfort of knowing it is there.
That is until Apple spoil it again?

Email Activity Not sending email when BPEL process fails

In 11g SOASuite I have a BPEL process which does the following,
1) Receive response from client
2) Email activity - Notify with an id received in the request as content
3) Insert data into a table using db adapter
Whenever db adapter has some key violations or issues, I notice that no emails are getting dispatched. When I look at EM console it displays that txn has been rolled back after 3rd step. I understand that but it makes me ask this question,
How can I make the process to send an email at step2 irrespective of an error that happens down stream at step-3? How to make email activity not part of this Txn scope?
It works as expected(emails are dispatched) when there are no issues at step-3.

Hi,
In order to not rollback your transactions, you need to hit a dehydration point, meaning, save your process into the db store and perform a commit until that point.
It sounds like a simple process, so you can drag a checkpoint activity after the email activity.
That is one option. Try, and see if it works for you.
Arik

Email Account Not Shown In Notification Center

Hi,
I have a few email accounts setup on my iPhone 5 iOS6, two Gmail account (business and personal) and two Exchange accounts (college and Gmail). The account that has the issue of not displaying new mail messages in the notification center is my college Exchange account.
I will hear the sound when new mail arrives, but nothing ever shows up. The Mail app even displays that there is an unread message. However, the notification center never shows the message.
Does anyone have this same problem or any suggestions about a resolution?
This account is, or was previously, set to push. I believe my other exchange account is setup the same way.
-Jo

HI
I NEED HELP !!
IN MY CASE I HAVE IPHONE 5 LATEST UPDATE I NOTICE FROM A FEW WEEKS EVEN THE EXCHANGE MAIL IS ON BANNER MODE AND LOCK SCREEN IS SET ON TOO WHAT I ONLY HEARD IS THE SOUND WHEN IS PUSHED FROM SERVER THE EXCHANGE EMAILS DO NOT APPEAR IN THE NOTIFICATION CENTER BESIDE THIS EVERYTHING ELSE IS WORKING PERFECT.
THANKS
L

5.1 sound not working

I have a X-Fi fatalty titanium champion series sound card with logitech z5500 5. speakers running vista x64 sp. I cannot fully utilize the 5. speakers for some reason. I have updated to the latest drivers, selected 5. speakers from both windows and the creative console launcher but then i get some butchered sound from only the front left and right speakers. I know the other speakers work bc if i only use 2. then i get the sound but it lacks the entire 5. stereo effects. Please [email protected]

Re: 5. sound not working?
cedricganon wrote:
Ive tried all those options but nothing. Device manager also says it is Creative SB X-fi. whats also suspicious is that if i use the sound card built into the motherboard, i get the same problem.
When testing the speakers i only have sound from the front left and right speakers. the others are silent. thats through both the vista tester and Creative tester
If that's the case I strongly suggest you test the speaker's connections out, probably on a separate PC if possible!
Also check this [url="http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9692">FAQ[/url] out for more details on connection and settings of the Z5500 speakers when used with a desktop PC.
Message Edited by boon2 on 05--2009 09:44 PMMessage Edited by boon2 on 05--2009 09:5 [email protected]

'Email' address not shown in mail form (file export)

Hi Gurus,
I am working with Campaigns in SAP CRM EHP3.
The problem appears when I execute Campaign through communication method "File Export" , because of 'Email' address doesn't appears in the file (although Business partners have them informed).
The steps I followed :
Create the Campaign with communication method "File Export"
Create a new structure in the attributes contexts to add: BAPIBUS1006_ADSMTP to dispose the field "Email" from BP
Now, from therole IC_MANAGER , I created a mailform incluiding new field 'email'
Execute campaign with a segment (all the BP in target group have Email address informed)
Theoutput filedoesn’t showemails addresses..
Thank you in advanced!
Regards

HI
I NEED HELP !!
IN MY CASE I HAVE IPHONE 5 LATEST UPDATE I NOTICE FROM A FEW WEEKS EVEN THE EXCHANGE MAIL IS ON BANNER MODE AND LOCK SCREEN IS SET ON TOO WHAT I ONLY HEARD IS THE SOUND WHEN IS PUSHED FROM SERVER THE EXCHANGE EMAILS DO NOT APPEAR IN THE NOTIFICATION CENTER BESIDE THIS EVERYTHING ELSE IS WORKING PERFECT.
THANKS
L

TS3276 After updating software yesterday, noticed that sent emails are not showing up in Sent Folder for one of my accounts.

After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?

Are you storing Drafts, Sent, Trash and Junk messages on the server via your .Mac account with Mail?
If so, do you access your .Mac account with an email client on another computer or regularly access your account via webmail on another computer?
If not, any other reason you need to store Drafts and Sent messages on the server?
While composing a message with Mail, it is temporarily saved in the account's Drafts mailbox so sounds like something went wrong with the process between finishing and sending the message with Drafts and Sent being stored on the server.
If you don't have any need for this, better to store Drafts and Sent messages locally on the hard drive with Mail.

Email Notifactions not going to email address

*** Can I please have an answer to this if possible*****
I have setup a user to recieve email notifactions and they are not getting them. I have set them up as a reader and also a co-author and have gotten the message about sharing the form. The user then clicks on the form name and goes to the site. When a form is entered the email address is not getting the email.
Please help I need to get this working!
Thanks
Carleen Wood
NAC Marketing
631-396-8714
==== Response ======
Hi,
Please make sure the users you shared the form with have verified their email address with their FormsCentral account. Here is an aritcile on how to set up email notificaitons with others: http://forums.adobe.com/docs/DOC-1424. Please make sure you have everything set up properly.
One other thing you want to check is to check the spam folder of the emails to receive notifications and make sure FormsCentral emails are not blocked.
Thanks,
Wenlan
==== Response ======
Hi Wenlan,
I used that article to make sure the steps where followed. When the email comes in the user is clicking on the link and going to the web site. Is there something else that should be done?
Thanks,
Carleen

Sorry, I must have missed your last response, but can you calrify what feature do you want to use in FormsCentral? There are email receipts and email notifications. If you want the user to receive a copy of the date he entered in the form, then the user needs to enter an email address in the form and submit the form, but if you want the user to receive all responses he and others submit to a form, then it's email notification. It sounds like email receipts in your case. For email receipts to work, you need to have an email field in your form and set up Email Receipts in the options tab, by selecting the email field in the "To:" field.

Since downloading Yosemite 10.10.2, emails are not automatically downloaded.I have to either click on Get Mail or click in and out of mail inbox.

Since downloading Yosemite 10.10.2, emails are not automatically downloading. I have to either click on Get Mail or click in and out om mailbox.
It's very frustrating as it does not happen on my iPad or Iphone.

Howdy welcon,
It sounds like your Mail application is not checking for mail automatically anymore after updating to 10.10.2. It seems to me that the setting for this may have reset, or changed at some point thereafter so I would check the preferences for the Mail application:
General preferences - Mail Help
Check for new messages
When Mail gets new messages from the mail server. By default, the option is set to Automatically (Mail varies how often it gets messages, based on whether your Mac is plugged into an electrical outlet).
An IMAP account may get messages more frequently if the mail server supports the IDLE command; make sure the option to use it is selected in the account’s Advanced pane in Mail preferences.
If you set the option to Manually, click the Get Mail button in the Mail toolbar to check for messages. (Whenever you click an IMAP or Exchange mailbox, it syncs with the server, and shows new messages.)
Thank you for using Apple Support Communities.
All the very best,
Sterling

Email sound not audible

Similar Messages

Maybe you are looking for