Email won't print

Using Mac mail, when I try to print an email, only the header prints, not the body of the email. Sometimes I can hit reply and the new window opens and it prints, but it's only intermittent. I've also tried opening the mail in a new window, but the body still won't print. I can take a screen shot, but if it's larger than the browser window, I have to do it twice. Any suggestions?

Hi David, and a warm welcome to the forums!
I can take a screen shot, but if it's larger than the browser window...
You can use Grab in Utilities to capture a smaller selection.

Similar Messages

This is a problem. The new layout for apple mail in iCloud shows the body of a mail or any attachments on the right half of the screen. But it won't print just the attachment, it prints the whole email page, cutting off the bottom of the attachment.

Even if I try to 'screen shot' just the attachment, the view won't move down as I enlarge the 'screen shot' to get all of the attachment. Previously, I could "SAVE" the attachment and only the attachment would be saved. Now the whole email page including the address info from the top is saved, so when I try to print what should be an 8.5x11 attachment the bottom of it won't print because the top 2" include the email address info.
Suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

My MacBook air won't open internet, email, photos or print,it keeps asking for my keychain login, but I don't have a login for keychain

can anyone help, my MacBook air won't let me connect to Internet, open and read emails, won't open photos or print, it just goes into standby mode, I have to go to forced quit.
also now i keep getting login for keychain, but I don't have a login for keychain, but I can't get rind of it.
any ideas, or do I need to have a diagnostic run on it?
thanks

What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

All my preprint email show as spam and won't print

I set up the account to only allow certain email accounts to send to eprint but I am getting messages from them all saying the email looks like spam and won't print it.
This question was solved.
View Solution.

I will need a little more info to help. What email server are you sending the ePrint job from? What file types/ attachments are you sending? Since it is failing on some level; make sure that when sending email to the printer that the Printer is the only recipient listed. If that is not done it will fail the job as spam. Make sure not to Cc anyone on the emails. Also, turn off your signature on the email if it is automatic and try the job again.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

After Update printer won't print to pages but will to emails

My iMac Intel did an update and since it was done my printer won't print for pages but if I print an email it will print.

Update Pages to the most up-to-date version and then restart the computer while resetting the PRAM. If you don't know how to do a PRAM reset, please click Intel iMac SMC and PRAM resets. If that does not fix it then please post back and we can take some other steps.

C6380 Prints everything OK but won't print out emails

Honestly, my succint subject title says it all. I can print anything from OpenOffice, photos, notepad, PDF files, anything from the web but I can't print out my own emails. I have tried turning the printer off and on, and I have tried rebooting my computer. I just downloaded the diagnostic utility from HP and it found no problems. I have a trip planned and I'm trying to print out the airline and hotel confirms and they just won't print.
What to do?
Thanks!

Hi Garfld,
I am providing you few steps to load an alternate driver on your computer and you can try it and check the email printing.
First print the network configuration page form the printer using these steps and note down the IP address:
Setup Menu>>Network>>View Network Settings>>Print Network Configuration Page
Now on your computer click on start menu>> on the start search type run and press enter.
You will be able to see a run box and on the run box copy and paste the command and press enter a black box will open and close quickly.
cmd /c rundll32 printui.dll,PrintUIEntry /if /b "HP C6380 New" /f %windir%\inf\ntprint.inf /r "LPT1:" /m "hp deskjet 990c" && rundll32 printui.dll,PrintUIEntry /y /n "HP C6380 New"
Now if you open the printers folder from start menu on your computer>> control panel>> printers.
You would be able to see the printer icon in there named as HP C6380 New with a checkmark on it and says ready.
Now please right click on it and select properties and select ports tab and you would be able to see the port selected as LPT1(now need to change the port from LPT1 to Standard TCP/IP port).
Once you see the LPT1 port click on add a port, Select Standard TCP/IP port and click on New port and a new box will appear asking to enter the IP address. Enter IP address which you noted down from the network configuration page and click on next and next and finish the wizard. Once the wizard disappears click on apply button available on the ports window and click on general tab and select print test page.
Check if the printer prints the test page fine and if yes try and print your email and check the result.
If the steps helps you please click on Kudos and mark the post as resolved
Although I am an HP employee, I am speaking for myself.

Thunderbird won't print emails. How do I fix this?

Lately, whenever I want to print out an email, I click "Print", but absolutely nothing happens.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

Using Adobe 8.1.2 some PDF files won't print

Since we've upgraded to the latest version of Reader, 8.1.2, some of the files won't print. For example, this morning I got two PDF files in the same email, they both opened in Reader, but only one of them prints--sending to a Canon ImageRunner 5570 printer/copier/fax machine. I'm not getting any error messages on my computer, it just doesn't print?
If I save a copy of the unprintable PDF to my desktop, then open in Acrobat 6.0 Standard (older version I know), it prints fine to the same printer.
Does anyone know what's going on here? Best, David.

We've been having the same problems printing to a Canon ImageRunner 4570, 8.1.2 won't print but 6 will. We can print to our other HP printer fine from 8.1.2, so it seems to be specific to the Canon. Tried printing from a shallow folder structure, but that hasn't seemed to have helped. Anyone heard if this is unique to the Canon printers? Thanks - Mike

Indesign-generated .pdf files won't print

I realize this question is vague to the point of being unanswerable, but here I go anyway.
Our department's publication person sent me a number of chapters of our book in progress so that I could print an uncorrected proof to show to our funding source. She emailed me .pdf files generated by InDesign CS2, probably, although it might have been CS3.
She also emailed me the indesign file for the frontmatter because I had some things to add, so the .pdf for that I generated myself.
I took everything to a local printer we regularly use. To print this job he was using a large commercial Canon setup I think. None of the .pdfs would print on it. He ended up having to print them all as images for the purposes of creating a proof for me.
Now, I printed all of them myself on our networked postscript printer, both from a Mac and a Windows machine, no problem.
Since the files had been emailed to me, and then to him, we thought maybe they got corrupted, so I brought them over on a disk, but that didn't help, not even the one file whose .pdf I generated myself would print.
So is this an issue that has come up--indesign-generated .pdf files being unprintable on a commercial printer but printable on a postscript machine.

Dov and Al,
Yes, I'm sorry, I do realize that this isn't enough to diagnose a problem. I was hoping that this might be something that has come up before and someone would recognize.
As far as I could tell, he was opening up the print jobs in Acrobat and sending them to his printer, which had its own job monitor. When he consulted that monitor he just said, no, it won't print.
He's a smart guy and I've done a number of jobs with him that were generated in indesign, so I'm really at a loss to explain what has gone wrong with this one.

Trace won't print in xy graph

Hi all:
I'm using a panel as a report, it has a couple of numeric controls and
a XY Chart. I'm using the print.vi to print the panel but the traces
are not printed (even I see them on the screen). The graphs (borders,
grids, titles, etc.) and the other controls are printed correctly.
I've checked the support pages in ni.com and they had this problem
reported for version 5 and they describe that the upgrade to 5.1 fixed
that. I'm using version 6.0.2 and I have the same problem.
Does any body has an idea of what is happening?
Thanks all.

Rob Cole wrote in message news:<[email protected]>...
> What colour are the trace lines? I had a bit of a problem with that. I
> had to make the traces black and make the lines thicker (right click
> on the line in the trace legend). Seems that the default line width is
> so narrow that it might not show up (or barely show up) when printed.
> Give the thick, black line a try and see if it solves the problem.
>
> Rob
Thank you Rob for your response. The support guys from NI found what
happened. It seems that when you have the antialiased option turned on
in the trace, it won't print. Why? don't know but at least the problem
was solved.

Reader 10.1.3 won't print on Mac OS 10.7.3

Mac OS 10.7.3, Reader 10.1.3, PDF file, won't print, error msg says "no pages selected" but they are. Irritating to have to select "print as image" for EVERY print selection.

Does this happen with all pdf document? Could you send me any one pdf document with which you are facing this issue?
mail me at [email protected]
Thanks,
Atul

Won't print from other computer

When I send an email from my laptop to print the printer recognises it as spam and won't print it ,HP deskjet 3070A,Vista,new set u

Hi Sparkle1,
There are a few things that could cause your email to be rejected by the spam filter. Here's a list of things to check when you send an email to make sure this doesn't happen:
1. The printer's address is the only recipient (this includes To:, Cc:, and Bcc: fields).
2. The subject line and body of the email both contain text and aren't blank.
3. There are fewer than 10 file attachments, and the total size doesn't exceed 5MB.
4. If the email is being forwarded, make sure the "FW:" tag is removed from the subject line.
Let me know if these help!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

My canon 5320 has ink but won't print on mac os 10.7.5

my canon 5320 has ink but won't print on mac os 10.7.5

Hi olschoolmike_1,
To try and resolve the issue, you will want to confirm that the inkjet nozzles are dispensing the ink correctly by printing a nozzle check pattern from the printer. If the pattern does not print correctly, we recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to print.. To print the nozzle check pattern and perform the cleanings, please follow the steps located here. If you still experience difficulty after performing the cleanings, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Email won't print

Similar Messages

Maybe you are looking for