Email xml attachments: Problems with charset

Hi all,
I have an email proxy to read emails with xml attachements. In the pipeline i recovered the xml file and covert it to Base64. When i execute it on a windows environment the process works fine with all characters (ó,ò,ñ,Ç, etc..) but if it is executed on a unix enviroment these chars aren't codified rigthly.
Some suggestions, please...
Thanks a lot,
Jordi.

Hi,
No errors in OSB. Yes, i know "Request encoding" field, but doesn't work. I think this only apply to email body but not for xml attachments, i don't know... Yes, the console shows bad chars as well as the log file.
If the xml attachment has not special chars then OSB can process the file, convert to Base64 and send this file to destination system. Then, destion system (TrustedX: to verify digital signature) return ok.
If the xml attachment contains "ñ, ó,etc...." chars then OSB can process the file, convert to Base64 and send this file to TrustedX, but TrustedX return "bad chars" error.
I tried to save the Base64 file and descode this file. The result was a XML file with bad chars instead of special chars...
Do you think someting like this can resolve the problem?: -Duser.language=es -Duser.region=ES -DLANG=es_ES.iso885915@euro -DNLS_LANG=spanish_spain.we8iso8859p15 -DNLS_NUMERIC_CHARACTERS=,. OR -Dfile.encoding=??? --> in the OSB startup file. Am not sure because on windows works without these options....
Thanks for your response....
thanks.....
Edited by: [email protected] on 11-ene-2010 16:52
Edited by: [email protected] on 11-ene-2010 16:52
Edited by: [email protected] on 11-ene-2010 16:53

Similar Messages

Groovy for model layer: problem with charset

Hello
I'm using JDeveloper 11g 10.1.1.3
I have a problem with charset in groovy expresssion in entity.
I have an entity Address with transient attribute, that uses next groovy expression:
((StreetName == null || StreetName.trim().equals('')) ? '' : 'ул. '+StreetName )+ (BuildNumb==null||BuildNumb.trim().equals('') ? '' :', д. '+BuildNumb) +
(CorpNumb==null || CorpNumb.trim().equals('') ? '' : ', к. '+CorpNumb) +
(StrNumb==null || StrNumb.trim().equals('') ? '' : ', стр. '+StrNumb)That expression have some russian sumbols (like ', стр. ').
On the integrated WebLogic all works perfectly well (I use OS Windows XP), but I have problem with production server based on SUSE Linux 11: all russian symbols from this expression are displayed as sybmbol '?', although data from attributes (StreetName and other) are correct.
I think should be possibility to set charset parameter for Groovy expression, but I can't find it.
In Address.xml file the charset is "UTF-8", and everywhere in project setting I set charset "UTF-8"
Anatolii

I've never exported more than a few layers from InDesign. Nothing as complex as you're doing. It's worked OK for me for a few layers. It may well be a bug. I suspect that this feature is not too widely used, which usually means that it never got well bug tested.

Having email imap synchronization problems with outlook 365 proplus

Hello,
I have email imap synchronization problems with outlook 365 proplus.
If I sent emails , my sent items box does not synchronized.
This is really a bug, because I see more problems like this on internet.
Please make ASAP a solution , this is not professional
JMR

Hi JMR,
Assuming you are referring to Outlook 2013 by "outlook 365 proplus". This is actually because Outlook 2013’s IMAP implementation has changed when compared to previous versions of Outlook.
While configuring the IMAP account, Outlook will talk to the IMAP server for the correct folders first. If Outlook 2013 can’t find the correct folder for the Sent Items in your mail server, it will create a folder which doesn’t sync with the mail server.
To sync the Sent Items folder with IMAP server, we can try to root the mailbox:
Go to FILE->Account Settings->Account Settings…
Double click on your IMAP account.
Click More Options… button, then Advanced tab
Type "Inbox" as the "Root folder path"
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Mail: 10.9.1 hasn't fixed group email and attachments problems

Hi all.
I was under the impression these were fixed by 10.9.1. but not for me.
Group email: trying to add a group to the BCC line email freezes Mail. I have to do this several times a day. I have several Contacts groups and Mail hangs whichever one I try to mail.
Attachments: every attempt to send mail with an attachment is rejected. I get the 'try again/choose another server' window after several minutes. Trying again is always successful, immediately. This has only happened since Mavericks and no settings have changed at the server end.
Any ideas? Thanks,
Aidan

10.9.1 is still in beta. Should you have any problems with it, you should post in the Mac Dev section.
Sorry,
Clinton

Attachments problems with eudora mailbox imported to apple mail.

greetings,
i am considering moving from eudora to apple mail. i've done a test of importing one of the eudora mailboxes and am having a problem with the attachments.
the attachments to the messages in the eudora mailbox appear to be recognized by the apple mailtool. however, apple will not display the attachments. my test is with a mailbox i keep messages from a friend who travels a lot and sends me jpegs of his trips. the import gave no error messages.
after the import, i can see all the message are in the new mailbox. i can open them fine. however, when viewing messages in apple mail that had attachments, mail shows the message and also shows a list of the pics attached, but it doesn't display the jpgs.
"This message has the following attachments:
.../Library/Mail/Attachments/xxx.jpg, etc..."
i can go to the attachment directory and find the jpegs there. they open fine in preview... but there seems to be no way to view or double click the filename to open it.
i've searched the local help and this forum and haven't found this thread yet...
does anyone have any experience with importing email with attachments?
is there some setting i need to change in mail to display the attachments or open them?
i appreciate any suggestions or pointers to the solution if somewhere on web...
jeffery-

ok, i think i found something that fixes this problem...
Eudora Mailbox Cleaner
i found it on: http://www.hawkwings.net/plugins.htm
this software seems to bypass apple's "import" and does it's own method of getting the mail files into apple's mailtool... in addition to allowing apple's mail to display the attachments (jpgs, pdfs, etc) this also looks like it preserved the message status... the read messages are marked "read" instead of "unread" also...
i wonder if there is a way to transfer them back, if i decide to go back to eudora after trying apple's mail... my next quest... i will be very flexible to try apple's mail if it is not a 1 way journey, since i'm looking for some solutions in apple's mail... thanks for reading-

Problem with charsets for foreign languages

hi
i have a problem with a webapplication
in my webapplication i have some code that gets data from a webpage of another webapplication. This other web application can use many foreign languages
the problem is that those foreign languages contain some special characters, and those special chars aren't displayed the right way
this is the code to get the data from the other webapp
private static StringBuffer getContent(String sUrl) throws MalformedURLException, IOException {
        StringBuffer content = new StringBuffer();
        URL url = new URL(sUrl);
        HttpURLConnection httpURLConn = (HttpURLConnection) url.openConnection();
        httpURLConn.setRequestProperty("charset", "utf-8");
        BufferedReader buffReader = new BufferedReader(new InputStreamReader(httpURLConn.getInputStream()));
        String inputLine;
        while ((inputLine = buffReader.readLine()) != null) {
            content.append("\n" + inputLine);
        return content;
    }as you see , i tried to set the encoding to UTF-8 but that did not solve the problem

an example of those special chars
fran�aisis displayed as
code]
fran��ais

Email and WiFi problems with IPad1

Yesterday, I sent out an email on my pc laptop to a group and received 5 bounce backs. When I went to my IPad to check my email account, only one bounce back appeared and after about 5 seconds, it kicked me out of email.
Today, it kicks me out after 1 second. In addition, I am no longer connected to my WiFi and the IPad cannot find a network to connect to - it's stuck in 'Choose a Network' mode. Meanwhile, my pc laptop is connected to my network and there are no problems with my WiFi.
I'm not sure where to start...

Try closing the Mail app completely and the see if it works when you re-open it : from the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A second option is to try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Need to send HTML email from Workflow : problem with sender

Hi all,
i need to send HTML email from my Workflow. I did it but i have a problem with the sender. The sender of email is always the agent responsible of workitem, and i don't want the receiver can answer to sender. So i need to put a false email address like nosender.at.mycustomer.com.
Possible to do that ?
Thanks for your help.
Cheers

Hi rick
How to change the wf-batch to some other name as you mention in previous reply. Can you give some details of that. If i use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 how to change the wf-batch name and if i use send mail step in my workflow how to change wf-batch name.
Regards
vijay

Txt to xml. Problems with characters(&, , ',...)

I want to generate a xml file with text from a txt file but i have problems with special characters such as &, <... I'd like to know if there�s any class or library to filter the text in order to generate my xml without problems.
Thank you.

Use JDOM to generate your XML. It will worry about escaping issues for you.
Here's a (probably rather inelegant) example for you to play around with:
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.*;
public class DateBoom {
     public static void main(String[] args)
          throws Exception
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          DocumentBuilder builder = factory.newDocumentBuilder();
          String dodgyText = "< & '";
          Document document = builder.newDocument();
          Element root = document.createElement("root");
          root.setAttribute("dodgy",dodgyText);
          document.appendChild(root);
          Element child = document.createElement("child");
          root.appendChild(child);
          child.appendChild(document.createTextNode(dodgyText));
          Transformer transform = TransformerFactory.newInstance().newTransformer();
          Source source = new DOMSource(document);
          Result result = new StreamResult(System.out);
          transform.transform(source,result);
}Your alternative is to use something like String regular expressions (regex) to do this manually, but the XML oriented libraries will catch more corner cases than you're likely to anticipate, making them more reliable.

Excel XML map problem with numbers.

Hi Xcelsius gurus,
Once again i need your help.
I use Excel XML maps to get data into my embedded spreadsheet, my data are current year sales per month like below:
115.450,36
220.336,20
189.222,56
200.005,48
just numbers.
After inserting the xml data i am not able to use them. No chart, No list, No gause can present my data. Like there is no data.
I realised that after mapping the XML, spreadsheet's cells showing an error, when i click on error icon there is an option to convert data to number, that fix the problem.
What could i do to solve this issue? Is there any problem with my XML file?
Pease help me with this one, i am confused.

Hi:
   what is your xml file format?
   you can try some ordinary xml format instead, here is a example:
   <?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
<book catalog="Programming">
<title lang="en">C++ Programming Language</title>
<author>Bjarne Stroustrup</author>
<year>998</year>
<price>198.0</price>
</book>
<book catalog="Networking">
<title lang="en">TCP/IP Illustrated</title>
<author>Richard Stevens</author>
<year>1996</year>
<price>156.0</price>
</book>
</bookstore>

Email setup wizard problem with internet mail accounts

I never had a problem with email setup until recently. When I try to click on internet mail account it wont open for setup. But when I click on enterprise account it opens for setup. Any ideas?

Please make sure you have a good mobile data coverage as it is need for the set up to run.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Attachments problems with iMessage - Question marks, empty attachments

Hello,
I am having a new problem and am looking for advice. I'm using iMessage across multiple devices - iPhone 6 on iOS 8.1.1, iMac on OS 10.10.1, and iPad Air on iOS 8.1. I recently, within the past two weeks, upgraded my OS on the iMac to Yosemite. The problem is that all the attachments... pictures, videos, vCards.. are showing as empty attachments in my iMessage history. I often refer to my message history for these pictures and files, and the files are not showing any more on my phone. The images show an outline with a question mark and the vCards don't open at all. Interestingly, I upgraded my wife's macbook air to Yosemite in the same time frame and she is having the same problem with her iPhone on iOS 8.1. The craziest part of all this is that the attachments all show up just fine when I open messages on the iMac. However, I rarely use messages on the iMac so having the attachments there is of no use to me. I need to be able to see the attachments on my phone. I have tried logging out of iMessage on my phone and on the iMac.
I have searched the boards for answers and have not found a concise answer. Any help is much appreciated.
Thanks,
Logan

Bump.. Any help would be awesome. This problem is driving me nuts.
Thanks,
Logan

My daughters have Iphones and both are registered to my email. The problem with that is that one get the others messages. I have to make one account for each their phones. How do I do that?

My daughters got Iphones a couple of years. I do not have an Apple-phone. I registered both phones on my email. The problem is that one of them get the others messages. I therefore need to make two different accounts for their apple-products. How do I do that?

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

XML Parsing - problem with a value of an element if starting with space

Hi Experts,
I need your valuable guidence to get out of a problem in parsing an XML file.
An XML file is read into xstring variable and it is processed to be split into the corresponding itab.
Please find the code below
types: begin of ty-itab,
            field(4096),
          end of ty-itab.
Data:
g_ixml                       TYPE REF TO if_ixml,
g_ixmldocument               TYPE REF TO if_ixml_document,
g_ixmlstreamfactory          TYPE REF TO if_ixml_stream_factory,
g_ixmlstream                 TYPE REF TO if_ixml_istream,
g_ixmlparser              TYPE REF TO if_ixml_parser,
g_ixmlnodemainlist        TYPE REF TO if_ixml_node_list,
g_ixmlnodelistmainelement TYPE REF TO if_ixml_node_list,
g_sxmldata                TYPE string,
g_ixmlnode                TYPE REF TO if_ixml_node.
DATA: wa_xmltab TYPE xstring,
            itab type table of ty-itab.
OPEN DATASET l_file IN BINARY MODE FOR INPUT MESSAGE v_msg.
READ DATASET l_file INTO wa_xmltab.
PERFORM f_create_xmltable USING wa_xmltab
                              CHANGING v_msg.
IF NOT v_msg IS INITIAL.
      msg = v_msg.
      EXIT.
    ELSE.
      itab[] = it_xmldata[].
    ENDIF.
CLOSE DATASET l_file.
Subroutine to convert xstring to char type ITAB.
FORM f_create_xmltable USING value(pi_inputxmlstring) TYPE xstring
                       CHANGING v_msg.
*-- create the main factory
g_ixml = cl_ixml=>create( ).
*-- create the initial document
g_ixmldocument = g_ixml->create_document( ).
*-- create the stream factory
g_ixmlstreamfactory = g_ixml->create_stream_factory( ).
*create input stream
g_ixmlstream = g_ixmlstreamfactory->create_istream_xstring( string =
pi_inputxmlstring ).
*-- create the parser
g_ixmlparser = g_ixml->create_parser( stream_factory =
g_ixmlstreamfactory
                                  istream        = g_ixmlstream
                                  document       = g_ixmldocument ).
*-- parse the stream
IF g_ixmlparser->parse( ) NE 0.
*if parser cannot be created then give error exit
    IF g_ixmlparser->num_errors( ) NE 0.
      EXIT.
    ENDIF.
ENDIF.
*-- we don't need the stream any more, so let's close it...
CALL METHOD g_ixmlstream->close( ).
CLEAR g_ixmlstream.
*get the number of main nodes of the XML document
g_ixmlnodemainlist = g_ixmldocument->get_children( ).
*set number of elemtns
g_inummainelements = 0.
g_imainelementsctr = 0.
g_inummainelements = g_ixmlnodemainlist->get_length( ).
g_ifirstlevelctr = 0.
*loop through the document till all have nodes have been covered.
WHILE g_ifirstlevelctr LT g_inummainelements.
*get the first node
    g_ixmlnode = g_ixmlnodemainlist->get_item( g_ifirstlevelctr ).
*check the type of node
    g_isnodeelement = g_ixmlnode->get_type( ).
*if node is not of type Element then continue
*because we have got to read only text from element nodes.
    IF g_isnodeelement NE c_nodeelement.
      g_ifirstlevelctr = g_ifirstlevelctr + 1.
      CONTINUE.
    ENDIF.
*get nodes of the element just found.
    g_ixmlnodelistmainelement = g_ixmlnode->get_children( ).
*get number of children of main element
    g_inumchildelements = g_ixmlnodelistmainelement->get_length( ).
*loop trhough the number of children
    WHILE g_imainelementsctr LT g_inumchildelements.
      g_ixmlnodemainelement = g_ixmlnodelistmainelement->get_item(
    g_imainelementsctr ).
*get type of node
      g_isnodeelement = g_ixmlnodemainelement->get_type( ).
      IF g_isnodeelement NE c_nodeelement.
        g_imainelementsctr = g_imainelementsctr + 1.
        CONTINUE.
      ENDIF.
*get name of the node.
      g_selementvalue = g_ixmlnodemainelement->get_name( ).
*get children of node
      g_childnodelist = g_ixmlnodemainelement->get_children( ).
      g_inumchildren = g_childnodelist->get_length( ).
      g_ichildelementcounter = 0.
*while there are number of children of node.loop through
      WHILE g_ichildelementcounter LT g_inumchildren.
*get the child node
        g_childnode = g_childnodelist->get_item(
g_ichildelementcounter ).
*check the type of node
        g_isnodeelement = g_childnode->get_type( ).
*if node is not of element type continue
        IF g_isnodeelement NE c_nodeelement.
          g_ichildelementcounter = g_ichildelementcounter + 1.
          CONTINUE.
        ENDIF.
*otherwise get element name
        g_selementname = g_childnode->get_name( ).
*get value stored in this node.
        g_selementvalue = g_childnode->get_value( ).
        g_numelem = g_inumchildren - 1.
        IF g_ichildelementcounter EQ g_numelem.
          CONCATENATE: g_slinedata g_selementvalue
                  INTO g_slinedata.
        ELSE.
*      store the value of noide in delimiter ~ line
*      Check for Invalid characters in file
            IF g_selementvalue CA '&'.
              REPLACE ALL OCCURRENCES OF '&' IN g_selementvalue WITH
            endif.
*if value contains delimiter then error
            IF g_selementvalue CA '~'.
              V_MSG = text-003.
              EXIT.
            ELSE.
              CONCATENATE: g_slinedata g_selementvalue '~' .
              INTO g_slinedata.
            ENDIF.
        ENDIF.
*continue
        g_ichildelementcounter = g_ichildelementcounter + 1.
      ENDWHILE.
      g_ichildelementcounter = 0.
*increment the main element counter by one to go to the next node
      g_imainelementsctr = g_imainelementsctr + 1.
*move the current delimiter line creted to internal table to be given
*back to the calling program
      MOVE g_slinedata TO wa_xmldata-data.
      APPEND wa_xmldata TO it_xmldata.
      MOVE '' TO g_slinedata.
      MOVE '' TO wa_xmldata-data.
    ENDWHILE.
*increment counter to move to hte next node.
    g_ifirstlevelctr = g_ifirstlevelctr + 1.
    g_imainelementsctr = 0.
ENDWHILE.
ENDFORM.                    "f_create_xmltable
XML structure
<?xml version="1.0" encoding="utf-8"?>
<ABCInbound xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\XYZSchema\ABCInbound.xsd">
<HH>
<RecordType>HH</RecordType>
<Source>ABC</Source>
<Destination>XYZ</Destination>
<TimeStamp>20050909220546</TimeStamp>
</HH>
<BH>
<RecordType>BH</RecordType>
<DocType>AB</DocType>
<Reference>2205516125</Reference>
<DocumentDate>20080909</DocumentDate>
<PostingDate></PostingDate>
<CompanyCode>ABC</CompanyCode>
<Currency>INR</Currency>
<ExchangeRate>1.0000</ExchangeRate>
<Park></Park>
<ItemNumber>2</ItemNumber>
</BH>
<BL>
<RecordType>BL</RecordType>
<Reference>2205516125</Reference>
<RefLineItem>1</RefLineItem>
<AcctType>K</AcctType>
<DrCrIndicator>H</DrCrIndicator>
<Account>01000003</Account>
<Amount>364.00</Amount>
<VendorName-1>TOM & JERRY IS MY</VendorName-1>
<VendorName-2> NAME TO BE PAID</VendorName-2>
<VendorName-3>1987566Z</VendorName-3>
<VendorName-4>22</VendorName-4>
<Street>UCX STREET</Street>
<City>ROAD 4</City>
<PostalCode>515004</PostalCode>
<Country>IND</Country>
<ContactPerson></ContactPerson>
<AlternatePayeeCode></AlternatePayeeCode>
<AlternatePayeeName-1></AlternatePayeeName-1>
<AlternatePayeeName-2></AlternatePayeeName-2>
<AlternatePayeeName-3></AlternatePayeeName-3>
<PaymentTerms></PaymentTerms>
<BaselineDate></BaselineDate>
<PaymentMethods></PaymentMethods>
<Allocation></Allocation>
<LineItemText>item text</LineItemText>
<TaxCode></TaxCode>
<TaxAmount>0.00</TaxAmount>
<WHTaxCode></WHTaxCode>
<WHTaxbase>0.00</WHTaxbase>
<Fund></Fund>
<FundCenter></FundCenter>
<CostCenter></CostCenter>
<InternalOrder></InternalOrder>
<TaxAutomatically></TaxAutomatically>
<SpecialGLIndicator></SpecialGLIndicator>
</BL>
<TT>
<RecordType>TT</RecordType>
<TotalRecords>1</TotalRecords>
<TotalValue>222</TotalValue>
</TT>
</ABCInbound>
when the above xml file is read and populated into ITAB, for element vendorname-2 which has a space in first position , that space is ignored.
This is being used for a FB01 posting and vendor is paid based on Name1+Name2 printed on cheque and due to the space ignoring problem, the vendor name is displayed wrongly thus causing problems.
I appreciate if someone could guide me thru and help me in solving this problem.
How to preserve the leading or trailing space.
g_selementvalue = g_childnode->get_value( ).
when i check g_selementvalue, space is ignored.
i will be greateful if someone could guide me through.
Regards,
Simha
Edited by: Simha on Dec 11, 2008 10:49 AM

0.02: A C C E P T: Request="NEXT"
0.06: Fetch session state from database
0.08: ...Check session ... owner
0.08: ...Metadata: Fetch Page, Computation, Process, and Branch
0.08: Session: Fetch session header information
0.08: ...Metadata: Fetch page attributes for application ..., page 330
0.08: ...Validate item page affinity.
0.08: ...Validate hidden_protected items.
0.08: ...Check authorization security schemes
0.08: Session State: Save form items and p_arg_values
0.08: ...Session State: Save "P330_PROJECT" - saving same value: ""
0.09: ...Session State: Saved Item "P330_SHUTTLE" New Value=""
0.09: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.09: Branch point: BEFORE_COMPUTATION
0.09: Computation point: AFTER_SUBMIT
0.09: Tabs: Perform Branching for Tab Requests
0.09: Branch point: BEFORE_VALIDATION
0.09: ...Evaluating Branch: BEFORE_VALIDATION type: "REDIRECT_URL" button: 12904321314585385 branch: (Unconditional)
0.09: Perform validations:
0.09: ...Item Not Null Validation: P330_SHUTTLE
0.09: ...Validation did NOT pass
This is from debugging, what does the point "0.09: ...Session State: Saved Item "P330_SHUTTLE" New Value="" "
mean ? I think it means, that the Shuttle somehow sets itself to null ?! but i dont understand why...
There is no computation or anything that deletes the shuttle, the page is quite small, there is not much more than the shuttle and the validations and computations to give default value and transforming the shuttle items into a collection to continue working with the IDs.
I dont check whats the problem
Edited by: user12154443 on 21.07.2010 09:47

XML File - Problem.with naming tags with XI standard functions

Hello,
simple (?) problem:
Receiver expects an XML file via file adapter.
(The source data comes from an RFC connect to XI.)
In the XML tags like these are expected (following W3C definitions):
A) </gdt:ValueGroup>
How to define a data type with a ":" in its name or to convert it to the required tag?
B) <gdt:ExtendedAttribute gdt:guid="4c102d6b077de7c1f0e27391e40bb80f" gdt:code="X01" >GR2 LI3</gdt:ExtendedAttribute>
This one is a real nice one. The part with "gtd:guid=" within the tag is variable. How to add such values into tag names?
Any ideas if this is possible with standard and how.
If this is the limit of XI I think we need an XSLT- or JAVA-maping program to generate the required file.
Thank you for any help!
Best regards
Dirk

Hi Dirk,
just one thing:
>>>>The part with "gtd:guid=" within the tag is variable.
this is ok as it's just an attribute
of the ExtendedAttribute tag's name
so it can be variable without any problems
(you can fill it in the mapping for example)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Email xml attachments: Problems with charset

Similar Messages

Maybe you are looking for