Employee Broadband contact details.
I was employed by BT and receiving the free employee broadband package. I am no longer receiving this and I have been billed incorrectly. I have contacted the BT billing team but they have told me to contact the Employee Broadband team.
Having left the company I cannot find any Email addresses or phone numbers for the Employee Broadband team, please could somebody pass on some contact details.
Many thanks.
I had similar problems when I retired three years ago. It took a bit of sorting out.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
Employee relationship navigation to contact details
Hi
I have a custom Z-relationship of employee, by clicking on it, i would like to navigate to contact detail.
How can i achieve this?
Many Thanks
pc
Edited by: lpc on Sep 9, 2009 6:11 AMI had similar problems when I retired three years ago. It took a bit of sorting out.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Employee Contact details and Project Details
Hello Experts,
I need some information about the Employee Contact details, its project details. i.e. The tables from which I can retrieve the required data.
Is there any built in BAPI for the same??
Please reply.
Thanks,
PrashantHi Prashant,
Contact details of the employee is hold in info type 105; i.e. table PA0105.
For the project details, if you're using PS module, CNR2 transaction -> Capacity -> HRMS Button is used.
Regards,
Dilek -
Problem when using a different data element in Employee Tab Contact Info
Hello,
My version: Nakisa OrgChart 4.1
I created a data element whose fields I wanted to show in the Position details (in the Employee Profile panel, which use the default Static layout 'Employee Tabs'). I am trying to display some contact info, and I used the Employee Tab Contact Info section within Employee Tabs to do it. Somehow the fields captions do not show once I do that (see picture attached). I tried using the 'Employee Tab Data Sheet' section to display the same information, and it works fine.
Any thoughts what could cause this behavior? All the fields captions have values that were configured in the data element.
Thanks
M.E.Sorry, just re-reading from the start, you are saying this is purely dependent on the type of section you select. Right?
With "Employee Tab Contact Info", you say it doesn't show; Have you tried using Field/Value Section (Multiple)?
Also, when it doesn't work, what <presentation> is referenced in your custom section within "OrgUnitPositionEmployeeDetail.xml" (in \.delta\AppResources\detailconfiguration)?
Stephen -
Can somebody tell me the contact details of the BT...
I have been waiting over 3 weeks for a date for a new installation for a brad new house after being told the phone line and broadband was working on day 1.....amazing as i dont even have a telephone wire from the telephone pole to the house!
I have spoke to at least 10 people, all of which take zero responsibility for the issue and just keep passing me to another department...
The last call i just received saying that "Terry Ann" will call me back tomorrow after 11am to "discuss what work needs doing".....great ill just wait for that phone call then. Every time i receive a phone call it just makes me more and more angry as we are no further to getting a resolution than i was on the 5th November when iwas told the issue was resolved.
Apparently for over a week BT were trying to rectify a fault on my line (even though a line didnt exist) and this fault could not be closed down on the system until it was resolved....and clearly it was never going to be!!
So i think, we are now getting somewhere near the point of getting a new installlation date, from the provisions team, but obviously i have to wait until after 11am tomorrow...
Certainly no signs of being moved up the queue because of the appalling service i have received!
I would love to take my business elsewhere but unfortunately Openreach run the new lines for everyone else that provides a telephone SERVICE....haha service makes me laugh!!!
I have never experience the level of incompetence as i have over the course of the last few weeks and when i asked one person i was speaking to whether THEY thought that the service i had received was acceptable....their response was "i can comment on that sir".
To be honest i dont want anyone else to say sorry, i dread to think how many times the ten people have said sorry.
Its just not good enough and apparently team supervisors are there to manage the staff and not to escalate customer complaints to...... but should a client request a call back from a supervisor you have to wait 2 hours for that....
So you wait 2 hours to get a call back just repeating what the member of staff had previously told you....a load of sorrys and waffle telling you that they arnt in the department you need.
I actually just wanted the contact details of someone senior that can hear my complaint as im not getting anywhere closer to having a phone line and internet after more than 2 weeks...
The only way BT can still be in business is that there truely is no other option in obtaining a phone line...
Please somebody tell me how i can get the contact details of the top guys at BT....i need something done about this!! It is not good for my blood pressure!
I cant have BT responsible for my son losing a father because he has gone insane whilst trying to get a phone line and internet....
HELP!!Hi Griggo888
Welcome to the forums.
I can have this investigated for you. Please fill in the contact us form to send us an email.
You can click on the link in my profile under the section 'About Me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
ESSMSS Scenario General Information - Emergency contact details
Hello All,
We have a scenario where in SAP ESS\MSS Portal , In MSS Tab --> Team --> General Information Page (Personal Data iView) , I am unable to view Emergency contact details Fields.
Even using iView Personalizations options I am unable to view the respective Information details .
On the bacckend I can see the details being avalable for the employee.
Requesting to some suggesstions and thoughts here on urgency.
Regards,
Ronniee.Hello All,
Adding to the scenario above. On one landscape we see in MSS --> Team --> General Information.
On
Emergency Contact details.
NA Number
Working Time : Next Week
whereas in working time we need the days of the week along with the working hrs.
Can anyone tell us if anything needs to be activated for the same. Or is it just a custome thing that we need to add on the respective standard object?
Regards,
Ronniee. -
BT Employee Broadband cut off - Automatically bill...
Hello,
I received BT Employee Broadband from a family member who was working for BT, their employment ended about a month ago, and I have been waiting for a call from BT to notify me of the end of service and options available.
I havn't received any calls or messages until this evening with a text message and an e-mail thanking me for my order for BT Total Broadband Option 3(at full price, no gift card, or anything else) becoming active TODAY.
I read on the website, and the employee who gifted it to me was told that at the end of the service I would be notified about the termination and options available.
I will be calling them tomorrow to make a complaint and cancel the order, but I will probably start a new order with the deals, as no contract has ever been agreed by myself for any broadband service other than the BT Employee Broadband. I will probably call Ofcom aswell.
Is it right they have started a new contract for me without any notice, and just an e-mail thanking me on the start date?Hi I am sorry to see you are having promlems with your BT Service
I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Function Module Required for fetching contact details from BUT000
Hi Everybody.
I have created a contact using transaction BP.
these details according to me will get saved in standard table BUT000.
Now i need standard FM used for fetching all these Contact details.
Help me i am new to CRM.Hi Amit,
Please check the following:
Data Retrieval Function Modules:
Name Description
BAPI_BUPA_ADDRESSES_GET Determine All Addresses
BAPI_BUPA_ADDRESS_GETDETAIL Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS Read Address Numbers
BAPI_BUPA_BANKDETAILS_GET Determine All Bank Details
BAPI_BUPA_BANKDETAIL_GETDETAIL Read Bank Details
BAPI_BUPA_BANKDETAIL_NUMBERS Read Bank Details Numbers
BAPI_BUPA_CENTRAL_GETDETAIL Read Central Data
BAPI_BUPA_EXISTENCE_CHECK Check Existence of Business Partner
BAPI_BUPA_GET_NUMBERS Read Business Partner Numbers
BAPI_BUPA_RELATIONSHIPS_GET Determine All BP Relationships
BAPI_BUPA_ROLES_GET Determine All Roles
BAPI_BUPA_ROLE_EXISTENCE_CHECK Check Existence of Role
BAPI_BUPA_SEARCH Search Business Partner for Telephone, E-Mail, Address
BAPI_BUPA_STATUS_GETDETAIL Business Partner: Read Status
BAPI_BUPR_ACTIVITYP_EXISTCHECK Check Existence of Contact Partner Relationship
BAPI_BUPR_CONTP_ADDRESSES_GET Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_ADDR_GETDETAIL Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_GETDETAIL Read Contact Person Relationship
BAPI_BUPR_EMPLO_ADDRESSES_GET Read Contact Person Relationship Addresses
BAPI_BUPR_EMPLO_ADDR_GETDETAIL Read Employee Relationship Address
BAPI_BUPR_EMPLO_GETDETAIL Read Employee Relationship
BAPI_BUPR_RELATIONSHIP_GET Read General Relationship
BAPI_BUPR_RELSHIP_CHECKEXIST Check Existence of General Relationship
BAPI_BUPR_RELSHIP_GET_DETAIL Read General Relationship
BAPI_BUPR_RESP_EMPLO_CHEKEXIST Read Relationship of Employee Responsible
BUPA_PARTNER_CONTACT_SEARCH Searches business partners for telephone, E-Mail, address
CRM_ORDER_READ Get all the Service Contract details.
Hope this helps!
Regards,
Saumya -
Help in writing logic to abaper for printing contact details from partnr fn
Hi friends,
I have to give the logic to the abaper to print the contact details of one partner which is manually entered in the quotation at header level.
i have a partner z1 with partner type PE which is manually entered in the partner fn field at the header level. this z1 partner fn is an employee. The name and contact details of this employee needs to be printed in the header of the output.
What is the logic i need to give to abaper for this.
Regards,
AnandHi Anand,
In case you do not find an ADRNR for the respective partner funtion in VBPA table, then, it means that the employee number derived from customer master is correct. Then, I think you can take KUNNR number for the employee partner function thro' VBPA and put the same in KNA1 table to get the right ADRNR. (As explained by me in the first post).
My question now is, are you maintaining the employee in XD01 (customer) or in VPE1 (Sales Rep)?
You can try with tables PA0002 Personal Data and PA0006 Addresses only if you maintain employees thro' VPE1 Tcode. PA0006 has PERNR field. But, what you have to make sure is that the table is getting updated. Else, you may not find the data here as well.
Hope this helps...
Thanks
Mukund S -
I am so sick of being passed from one agent to another, from one department to another retail, to Openreach and back again, and all the while having no broadband service and no-one being prepared to take responsibility for the problem, which is a BT problem. I had to go and sit in a coffee shop with my kids today so they could access the internet and do their homework. Until quite even recently you could contact directors via Twitter (whether they actually read it or not is another matter. I suspect the Director of Customer Service is more interested in their large bonus and next holiday than customer service). Meanwhile the service agents are left to take the flack, and have absolutely no ability or authority to do anything to help anyone. Pretty shoddy really. Anyway, does anyone have any direct contact details for any of the BT directorate?
Hi lellypompom,
I'm sorry about the problems you're having with your BT service, if you need any help getting this sorted please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Set 'work email' or other contact detail via PowerShell?
I have a few users trying to set alerts on OneDrive documents. They can get through the Alert set up process, but they always get a warning about their emails being blank, and that they won't receive any email alerts. Turns out that their contact details
shows their work email as blank.
I've enabled the Sharepoint settings to let users edit their work email, and that resolved the issue. But I want to use Powershell to fix that for all my users, instead of making them fix that up manually. Get-SPOuser doesn't bring back any email property
(only DisplayName and LoginName), and there doesn't seem to be any way to get contact details when using Sharepoint online, unlike the on-site solution (get-spuser).
Just wondering if there's any way for me to accomplish this?
Thanks,
StephenYou would instead use
Set-MSOLUser or use DirSync to synchronize with an on-premises Active Directory domain that had this information.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
IPhone 4 - iOS 5 upgrade - LOST ALL CONTACT DETAILS
I upgraded to iOS 5 and now I can't get to any of my contact details.
What I have -
The list of my contacts is displayed under the contacts option, but when I touch any contact name it takes me back to the home screen. Can't make any phone calls. But I can receive phone calls and the caller-id displays the correct name too. So my guess is the information is there somewhere, I just can't seem to find it or use it.
What I have tried so far -
1) Resynced contacts from the Info tab in iTunes. I get the following error msg - "iTunes couldnot sync contacts to the "iPhone" because contacts are being synced over-the-air
2) turned off sync over wi-fi from iTUnes. Tried syncing again. Same error message as above.
3) Tried going to "Mail, Contacts, Calendars" under settings, it takes me back to home screen. It displays the "Mail, Contacts, Calendars" details screen for about half a second and takes me back to home screen.
4) Went to iCloud under settings and tried to turn off teh "Contacts" from there. It simplays doesn't turn off. I can turn off everything else listed under there, but contacts. No matter what I do, it stays on.
5) Signed into iCloud.com with my account. The contacts info there has only one contact listed (mine).
6) Tried to edit contact details from one of my recent text messages. Doesn't work. Takes me backto home screen.
Does anyone have any ideas about how to fix this. At this point I can't even use the main function a phone should be performing, i.e. make calls from my stored contacts.I had the same problem. Time Machine proved invaluable here. I opened up Address Book, selected "All Contacts", started up TIme Machine via Spotlight, and scrolled back to the day before I ran the 4.2.1 updater. Bada bing, all contacts restored to the address book! Simply did an iPhone sync after that and all was well again.
Still, nasty bug Apple. :-| -
hi over the past month have received maybe 5 scam emails from apple.
I opened one the other day cause I thought well maybe it is from apple.
went through the steps and it was amazed at how well they did at copying apple website. you could even go to the apple shop page from their page!
what set me off that it was fake was that I tried to open the other apple pages along the top and it wouldn't let me. so I opened my own apple page and logged in. and realised that they don't ask for your bank details in your Apple ID account.
anyways so now what has happened is I got an email today " from myself" with this same scam email. it is as if they have hacked my email account and sending me these emails. I want to report this to apple but am unable to find any contact details apart from call back options. does any one have any advice on this.I've had that same exact issue, I received the first e-mail claiming to be from Apple last night (though over the past week I've received two other scam e-mails from different addresses claiming that my bank transactions have been aborted). It said it was from my own address, and I checked it closely to make sure it wasn't a spoof account but found it was indeed my own e-mail address. Five minutes ago I changed my password, and I have just now received a second e-mail exactly the same, still coming from my own account. My best guess at an explanation is that it may have been sent before I changed my password and there was just a delay in the message sending, resulting in it coming through after changing my password.
I've now forwarded the e-mail on as an attachment to the [email protected] address, however this still doesn't help me with regards to stopping these e-mails. It concerns me that even though I changed my password they still possibly have access to my account. I tried checking my account activity but as opening the mail app on my iPhone is considered as a log in and I check it almost twice an hour, it's impossible to tell which could possible be an intruder logging in. -
Mail keeps opening in the background when accessing contact details
I'm using iPhone 3G
I have an App called FreeMemory (from the AppStore) than can view all running apps in the background.
What I'll do is check FreeMemory and I can see that Mail is NOT running.
Then I go ahead and open Contacts and tap on a particular contact name (I noticed that it takes a while to open the details of a particular contact).
After that I close Contacts and go back to FreeMemory. Now I see Mail running in the background.
(but when I only open Contacts and scroll through the list and I dont tap a contact name, it WONT open the Mail app).
I can conclude that accessing a contact detail also opens Mail app which eats RAM since im using only iPhone 3G which has small RAM.
*PLEASE note that all my mail accounts are already INACTIVE/DISABLED and my Fetch options are OFF and set to Manual. Also, I DONT have any email adress info of my contacts stored in their names.
Any idea how I can prevent Mail from opening when I access contact details??
thanks!Try with "Minimize to Tray" Add-ons
*https://addons.mozilla.org/en-US/thunderbird/search/?q=minimize+to+tray -
Not able to see a narative report from a contact detail page.
In the URL of the weblink, I set up the link to the report as follow:
https://secure-ausomxdca.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_31844_Shared_Folder/WEB+APPLET/FAX+to+contact&Action=Navigate&P0=1&P1=eq&P2=Contact."Contact ID"&P3%%%Id%%%
but when I right click on the weblink on the contact detail page I get this:
https://secure-ausomxdca.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_31844_Shared_Folder/WEB+APPLET/FAX+to+contact&Action=Navigate&P0=1&P1=eq%0d%0a&P2=Contact.%22Contact+ID%22&P3ADBA-3AYF6O
I get %22&P3ADBA-3AYF6O at the end of the URL when I should get %%%Id%%%.
What could have happened? How can I fix this?
Thanks in advance for your help!Actually thats correct. When you specify %%%Id%%%, it gets replaced with actual row id which is "ADBA-3AYF6O" in your case.
One mistakeI noticed, '=' is missing after P3 it should be
https://secure-ausomxdca.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_31844_Shared_Folder/WEB+APPLET/FAX+to+contact&Action=Navigate&P0=1&P1=eq&P2=Contact."Contact ID"&P3=%%%Id%%%
Try it.
Dinesh
Maybe you are looking for
-
ALV grid export to Excel 2003-f.01
Hi all, I have an issue with ALV grid export to excel 2003 ,when i tried to download with the option as local file > xls file ,the report downloads with page breaks which the user does not want , each break comeswith header . With the option of list>
-
Webpages are not display correctly
Hello, my problem is webpages are not shown correctly you can see in images i use chrome Version 41.0.2272.118 dev-m it is shown correctly after certain refreshes please help me this is very irritating.
-
Y in java objects are created on heap only n not on stack ?
Hi , I need a answer to the question " why all the objects are created on heap only in java and not on stack " ? In java a object is created when we specify new i.e. for example, consider the following cases. 1. Vector v = new Vector(); here object i
-
I'd like to output some frames for print. What is the best possible output setting available? Has anyone done this with good results? Thanks, Darrell
-
I am currently looking for my daughters lost ipod. All the devices are showing up on locate my iphone map except her ipod that is lost. Is there any way I can try to locate it. Why wouldn't it be showing up with the rest?