Empty Lines are not taking

Hi all,
    I am doing the scenarios File-File with FCC. My source file is as follows. But it is not picking the Empty lines which are there in the source file
So My structure as follows:
MT_BNK01 1..1
RECORD 0..Unbound
--Record_data 0..Unbound
So in the Sender CC i written as follows
Recordset Structure:: RECORD,1
FCC paramtetrs as follows
RECORD.fieldNames     RECORD_DATA
RECORD.fieldSeparator     '0x0D''nl'
ignoreRecordsetName     true
What i need to do extra to capture the empty lines from my source.
Thanks in Advance,
Best Regards,
Vijay

Hi Rajesh,
I did that one also. There is no effect. Currently i am using all the these FCC paramters:
RECORD.fieldNames     RECORD_DATA
RECORD.fieldSeparator     '0x0D''nl'
RECORD.endSeparator     '0x0D''0x0A'
ignoreRecordsetName     true
RECORD.fieldContentFormatting     nothing
RECORD.enclosureConversion     YES
The problem here , we given the 'nl' as the fieldSeparator. So if 2 consucutive 'nl' comes then there no value between them so it is suppressing. How to overcome this.
Warm Regards,
Vijay

Similar Messages

The Apache axis2 jar files are not taking at run time

While running the application I was getting the following errors. The error is getting at run time only. It has compiled successfully.
It ran under eclipse without any issues. But with Apache axis we are getting following error trace while uploading to server. The Apache axis2 jar files are not taking at run time.But compiling successfully.
The application is running under Oracle R12 server.I didn't find any option to set class path for run time in R12 server.
Using Java version is 1.6 and Apache axis2.1.6.2
Error trace:
Exception :java.lang.NoClassDefFoundError: Could not initialize class org.apache.axis2.description.AxisService
Error : java.lang.NoClassDefFoundError: Could not initialize class org.apache.axis2.description.AxisService
com.rightnow.ws.wsdl.RightNowSyncServiceStub.populateAxisService(RightNowSyncServiceStub.java:41)
com.rightnow.ws.wsdl.RightNowSyncServiceStub.(RightNowSyncServiceStub.java:636)
com.rightnow.ws.wsdl.RightNowSyncServiceStub.(RightNowSyncServiceStub.java:625)
com.rightnow.ws.wsdl.RightNowSyncServiceStub.(RightNowSyncServiceStub.java:673)
com.rightnow.ws.wsdl.RightNowSyncServiceStub.(RightNowSyncServiceStub.java:665)
com.rightnow.ws.util.ContactUtils.initializeService(ContactUtils.java:57)
somejsp.jspService(_somejsp.java:189)
com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473)
oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
java.lang.Thread.run(Thread.java:619)

Hello,
I too am trying to use Axis2 application in R12. But getting the following error:
java.lang.classCastException: com.sun.xml.messaging.saaj.soap.ver1_1.SoapMessageFactory1_1Impl cannot be cast to oracle.webservices.soap.VersionedMessageFactory
If I run the application standalone from java command line it works fine. I think the error could be because of some oracle app jars getting picked up inatead of my application jars. How to make sure that my application jars get picked up instead of oracle jars
I tried loading my jar file and then setting it as contextClassLoader using "Thread.currentThread().setContextClassLoader", but this did not help.
Can you please let me know what can be tried to fix this
Thanks
Srikanth

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Schedule lines are not in sink for PO

Hello Everyone,
We are using ECS.
So we create PO in SRM with some schedule lines and transfer it to the ECC system.
But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
So is there any OSS note to check this?
Regards,
Khushbu.

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Lines are not generated for holidays and sundays

Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
partha

Hi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

The Informatica maps are not taking the parameters from dac

Hi All,
The Informatica maps are not taking the parameters from dac. We have tried setting the parameters at DAC level, task level. The parameter file is getting generated by DAC and has correct values as we expect. But when we run a full load from DAC, the initial date in Informatica is being taken as 1/1/1753. Do we need to specify the parameter file name at workflow level?
Is there any setting that we are missing. Please guide us and let us know the steps we should take to make sure that the parameters that we set at DAC level get passed to the Informatica maps. Also mention this is happening only with dates and other parameters like data source num , soruce and target database information is getting passed to Informatica maps.
The version of Informatica as 7.4.1 and dac version AN 328, Build date Aug 8 2007.
Please Help me in this issue.
Thanks in advance for all members.

Hi Ananth.v
Try to make sure that your parameter file's path in Infa is in-sync with the path of DAC files being generated.
The date you are getting seems strange - which are your Source/Target DB platforms?
In general take a look at [this thread| http://forums.oracle.com/forums/message.jspa?messageID=3405906#3405906] , it may make some thing clearer for you.
Hope it helps,
Please post if you found a solution,

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Secure SIP lines are not supported on the CME

Hi,
I was looking for the configuration of Secure SIP lines on the CME and found in the link bellow that "Secure SIP lines are not supported on the Cisco Unified CME mode", only Secure SCCP lines is supported:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeauth.html
In my opinion, security is an important subject nowadays and SIP is what Cisco is investing more and more ... it's awkward that Secure SIP lines is not supported on the CME.
Does anyone knows if this will be implemented in future versions of CME?
Thanks.

Just to described the answer that I received from Cisco ... there is a roadmap for FY16.
Regards.

Cintiq 21UX Lines are not smooth in Photoshop CS

Just got my new Cintiq 21ux this week....love it but when using Photoshop CS the lines are not smooth even when I use a ruler etc....have used a tablet for years so it's not practise but the software or something ???.....I do have smooth enabled in the Brush Dialog box so that's not the problem. When I sketch in Alias Sketchbook Pro and Corel Painter IX the lines are perfect and smooth.......Anybody have a similar problem and a solution.....any help would be appreciated...
Cheers Mike
PS
I have already turned off double-click distance and have the latest Wacom Cintiq driver version 6.05 installed
My operating system is Windows XP service pack 2

Hi All thanks for the reply's.....
Dave
* Have reset my Photoshop preferences and same results
* Have reset Wacom preferences and settings as per instruction from Wacom...also uninstalled and reinstalled Cintiq driver
* Have played around with the brush settings...resolution etc etc etc....and no improvement in line quality
* Have also heard from other people with Cintiq having the same issues with Photoshop
* As much as I can tell the mouse looks okay
I think it's a Wacom Cintiq Driver issue as my previous Intuos tablet etc I never had a problem with.
Scott
*Have also learned from others that other Photoshop versions also have same bad line quality....
*Zooming does not solve the problem as I need to see the whole canvas to sketch and you still get the wobbly lines....
Phos....
* If I don't figure this out will have to give a bug report....not exactly sure how to do that though......
The mystery continues

SMARTFORMS :lines are not printing.

Hi all!
We have a SMARTFORM for outbound delivery.In that items are shown in a table manner with horizontal and vertical lines. Every thing is coming fine while taking print from laser printer but lines are missing when taking print from Dot Matrix printer.Please help where mistake is going on.

Hi ,
Go to SPAD and check if ur device type for dot matrix printer( output devices ) is SAPWIN or not, if it is not ask d basis guy to create an output device with SAPWIN or TWSAPWIN
i think this will solve ur problems
reward if useful,
Cheers,
Deepthee kasal

ETD and Base line are not matching

Hi All,
My requirement is in production server, for some invoices the Expected time departure and base line date are not matching,
What will be the reason behind this? Can you please advice how to approach to this problem.?
Thanks in advance
jaya.G

Hi,
could you please eloborate the issue?
Thanks,
Srinu

Schedule lines are not getting confirmed even though stock is there

HI,
i want to discuiss one sensitive issues which is a simple one.
my schedule lines is not getting confirmed even stock is there at sales order.
there is no delivery block.
there is no minimum stock level.
there is no credit check for that.
there is stock of 2 EA in that plant and storage location, but stock is not getting confirmed at sales order level or transaction level.
even stock is there it is going to avaliability check overview screen and giving stock confirmation after 12 days.
even i checked all the dates.............but its of no use.
what to do ?
after testing all the possible options i am taking help from
please help me in this regard,
regards,
balajit

Hi
you need to check the following.....
First check the Factory calander of your plant whethear some holidays or not
Second most importantly you have to check which stretagy group is assigned in the material . whethear it is make to order or make to stock. change it as make to stock.
"What happened if material stretagy group is make to order then from sales order system generate requirement of that material against that particular stock, that time system do not consider the unrestricted stock and not confirm schedule line."
Regards
Shambhu Sarkar

Call on PRI Line are not transfered to IP-AA on CCM

Greetings,
Having an issue with H.323 Voice gateway. Incoming calls are not transferred to Auto-Attendant. This happens randomly but I have noticed that the frequency is higher when there are no incoming call no PRI lines.
(Check the attachments for debugs)
The calls seems to be answered by gateway but ISDN-Connect message is never displayed. I tried to call from my IP Phone to but no ISDN-Connect message for this call, however, the call is landed on gateway. Running CCM 4.2(3), IPCC Express 4.0(4),IOS version 12.4(8) Advance IP Services, tried IOS 12.4(5a) Advance Enterprise Services as well but in vain.
Another questions is that: we can run both MGCP and H.323 on voice gateway but how will it register with CallManager. I guess we can use some loopback technique for this purpose. Need suggestions/comments!!!
Please find the attachments of Q921 and Q931 debugs. Took debugs for 2-scenarios
1- Called from and outside number to PRI line
2- Called from IP-phone to PRI line
Regards,
Syed Khalid Ali

You can refer this guide for more information on configuring loopback for PRI interface:
http://www.cisco.com/en/US/docs/ios/12_2/dial/configuration/guide/dafchant.html#wp1002838

Changes to policy are not taking effect on windows 2000 workstations

We are currently running zenworks ver4. We have an XP 2000 mix
enviorment. When we make changes to the policy on XP the changes work.
When we make changes on the 2000 policy they do not take effect. I did
give the user local admin rights and that did not help. We are running the
latest client as well and installed the recent patches on the server.
Dan

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Empty Lines are not taking

Similar Messages

Maybe you are looking for