Enable save data locally / enable detail page generation

Under the behaviors tab on the display templetes I have checked "Enable Popup Menu", checked "Enable Save Data Locally" and checked "Enable Detail Page Generation". When you right click on the applet, some applets the "Data >" selection is disabled/grayed out for others it is not and works properly. I can get the data via the showDetailUsingGet() method. Works on most grid and chart applets but does not on some. Please help.

Typically this behavior would be attributed to the kind of recordset behind the applet . If it is dynamic (for example time based queries and you have enabled the auto refresh property of the applet , so with every refresh you have a new data set) then the data detail would be grayed out otherwise it would work as advertised.

Similar Messages

Cannot save data in item details iview (validations, calculation problem)

Hello,
I'm unable to save data in an item details iview. It complains about validations or calculated fields according to error message below.
I am however able to save data directly in data manager and I have no automatic excutions (set to None) on my validations.
So I guess I have to check calculations, or?
#1.5#00144F1E87AC0066000000B1000059190004769A5679B69E#1256305154700#com.sap.pct.mdm.appl.masteriviews.ItemDetails$ItemDetailsDynPage#sap.com/irj#com.sap.pct.mdm.appl.masteriviews.ItemDetails$ItemDetailsDynPage#MDO1#41676##gcomdev_GEQ_35915650#MDO1#720b5f90bfd911de9b3100144f1e87ac#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#/System/Server#Java###taxonomies has invalid elements<fieldNameenabledpriorityfieldName1enabled1~priority1...>##
#1.5#00144F1E87AC005D000001F2000059190004769A74192B38#1256305651690#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###com.sap.mdm.commands.CommandException: com.sap.mdm.internal.protocol.manual.ServerException: A runtime error occured while evaluating an Validation or calculated field#
#1.5#00144F1E87AC005D000001F3000059190004769A74194266#1256305651696#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.mdm.validation.commands.ValidateNewRecordValuesCommand.execute(ValidateNewRecordValuesCommand.java:121)#
#1.5#00144F1E87AC005D000001F4000059190004769A7419431A#1256305651696#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.mdm.admin.utils.MdmUserCommandUtils.validateNewRecord(MdmUserCommandUtils.java:321)#
#1.5#00144F1E87AC005D000001F5000059190004769A741943B5#1256305651696#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.pct.mdm.appl.web.ValidationService.execute(ValidationService.java:73)#
#1.5#00144F1E87AC005D000001F6000059190004769A741944DC#1256305651696#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.pct.mdm.appl.web.Record.update(Record.java:2009)#
#1.5#00144F1E87AC005D000001F7000059190004769A74194574#1256305651696#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.pct.mdm.appl.masteriviews.ItemDetails$ItemDetailsDynPage.saveRecord(ItemDetails.java:2139)#
#1.5#00144F1E87AC005D000001F8000059190004769A7419460F#1256305651697#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.pct.mdm.appl.masteriviews.ItemDetails$ItemDetailsDynPage.onSaveRecord(ItemDetails.java:1920)#
#1.5#00144F1E87AC005D000001F9000059190004769A741946AA#1256305651697#System.err#sap.com/irj#System.err#MDO1#41676##gcomdev_GEQ_35915650#MDO1#748f4b50bfd911deacb000144f1e87ac#SAPEngine_Application_Thread[impl:3]_8##0#0#Error##Plain###     at com.sap.pct.mdm.appl.masteriviews.ItemDetails$ItemDetailsDynPage.onSaveRecord(ItemDetails.java:1828)#

Hi Olof,
From the error message, it seems that the new created record is " Failing a Validation".
From the Data Manager you can save a record , when automatic executions set to None.
But the same will fail when it is added to a validation group and that group is used in the Item Details Iview while creating a record.
Please update the status.
Regards,
Nimal

HTML DB - Tab - Save data of the previous page on tab changing

I am trying to implement the technique given in the above thread. Have not yet been able to do it successfully. Can someone give more specific instructions on how to save the data on the page as a user clicks on another tab and loses the data entered in the form. This looks fairly easy using the tab names technique, but I must be missing something.
Thanks,
Betsy

I have a test case scenario on my laptop where this works fine and the data is still in the form when I come back to it.
The production application has a similar data set, similar everything and the page with the form will not retain the data. Everything was created using version 2.0.
All the testing is done locally on my laptop, but the production db lives on another server as well as the application.
Do you have any ideas why they are functioning differently? Is there anywhere in any of the attribute settings for the page that I need to change something?
Thanks so much.
Betsy

Validate and Save data of the current page when tab changing

Hi,
Using APEX version 2.2
We have a multi tab chain form, which each page / tab references a different table. Seperately, when each form is saved, the data is validated and committed to the database.
The business requirement is to be able to enter data on a form, and then click on another tab, and the page is "validated" and saved, and then the tabbed page is then shown.
From what I have seen on the forums, pressing a tab, will not validate and process the original form, only perform the page rendering processes.
I have read the forum thread Re: Navigating to non-current pages for a tab - but have not seen how this works? Is there some dialog missing?
What we would like to do is call the tab as per usual;
javascipt:dosubmit('T_PAGE_6');
But also add the save validation first;
javascipt:dosubmit('SAVE'); javascipt:dosubmit('T_PAGE_6');
This would allow the full form validation
Is this part configurable? otherwise is there anothe solution we can use?
Thanks
Jon

Jon, You essentially want your standard tabs to do nothing but act as buttons. If you can adjust the templates to make those "buttons" look like tabs, you'll have what you need.
Others will have to advise on how to do that, though.
Scott

Service Data in Account Details Page

HI All,
I have a issue. I need to add the details of the service orders with sold to party(BP) as an assignment block in the Account overview page, just like Opportunity, Activity and other assignment block available in this page.
Any Idea how i can begin with???
Regards
Dave
Edited by: Dave on Mar 5, 2010 11:45 AM

Hi,
I haven't actually tried doing it, but can think of the follwing way:
1. Go to the BP.
2. At the top of the page you will see link as 'more'
3. Click and it will show you Factsheet.
4. See if the required view is there in the factsheet.
5. If its there, then see the technical details
6. Add that particular view to the overview page using Application Enhanacement Tool
Hope it helps.
Regards,
Rajiv

Iphone application development, how to save data locally?

I am now developing a small application, need to be a small part of the data stored locally. Whenever a user when the next time you open this application, can call this data, the present flash cs5 iphone application development, can achieve this functionality?

answer -> http://forums.adobe.com/thread/514065?tstart=0

MySQL Sytax error with master and detail pages

Master and Detail pages.
I get an SQL error when I click on an Item in the Master
page.
“You have an error in your SQL syntax; check the manual
that corresponds to your MySQL server version for the right syntax
to use near 'ID = 16 LIMIT 0, 10' at line 1 “
If I try to open the detail page I get
“You have an error in your SQL syntax; check the manual
that corresponds to your MySQL server version for the right syntax
to use near 'ID = -1 LIMIT 0, 10' at line 1 “
I created this pair by simply clicking on Insert/data object/
master detail page.
I have tried this various ways, but always get the same
result.
Is there a bug in CS3?

Sorry I have solved it myself.
I had accidentally put a space in a table header in the mySQL
data bank.
All works well now.

Enabling Save button Detail tile load - event

Hi,
I want to disable "New" button and enable "save" button on load event of Detail tile. Can anyone plz help me out..
Thanks
Mateen

You can do this by setting the authorisation of the specific tile:
mcore.setreadonly = <boolean>
Only true and false is allowed, It is i.e. used in the OnLoad of tile Toppcassop2 or in various other EnableModification methods.
Regards, Kai

Will re-installing OSX and enabling Save Settings kill virus' and malwares?

Hello
My web pages are slow to load sometimes and I'm wondering if I have a virus or malware that is doing it.
I don't want to use virus checkers or malware checkers because I've heard they are themselves used by the virus writers to plant virus' and malwares.
So my question is; If I re-install OSX while enabling Save Existing Settings, will that remove any virus' and malwares if they are on my Mac?
Thanks for your help.

As there are no viruses for Mac OS X it is extremely unlikely that this is your problem, so let's concentrate on your slow page loading.
Firstly, you need a minimum of 10.5.7 (10.5.8 is better) to run Safari 4.0.3. You show you are using an earlier version of leopard.
Post back if you are not using Safari.
But to answer your direct question: just possibly, so read the following first:
No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download from:
http://www.clamxav.com/
However, the appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
You can read more about how, for example, the OSX/DNSChanger Trojan works here:
http://www.f-secure.com/v-descs/trojanosxdnschanger.shtml
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
(Note that a 30 day trial version of MacScan can be downloaded free of charge from:
http://macscan.securemac.com/buy/
and this can perform a complete scan of your entire hard disk. After 30 days free trial the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)
A white paper has recently been published on the subject of Trojans by SubRosaSoft, available here:
http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
Also, beware of MacSweeper:
MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
http://en.wikipedia.org/wiki/MacSweeper
On June 23, 2008 this news reached Mac users:
http://www.theregister.co.uk/2008/06/23/mac_trojan/
More information on Mac security can be found here:
http://macscan.securemac.com/
The MacScan application can be downloaded from here:
http://macscan.securemac.com/buy/
You can download a 30 day trail copy which enables you to do a full scan of your hard disk. After that it costs $29.95.
More on Trojans on the Mac here:
http://www.technewsworld.com/story/63574.html?welcome=1214487119
This was published on July 25, 2008:
Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
Net security groups say there is anecdotal evidence that small scale attacks are already happening.
Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
A further development was the Koobface malware that can be picked up from Facebook (already a notorious site for malware, like many other 'social networking' sites), as reported here on December 9, 2008:
http://news.bbc.co.uk/newsbeat/hi/technology/newsid_7773000/7773340.stm
You can keep up to date, particularly about malware present in some downloadable pirated software, at the Securemac site:
http://www.securemac.com/
There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac, and alternatives will probably appear in the future. In the meantime the advice is: be careful where you go on the web and what you download!
If you think you may have acquired a Trojan, and you know its name, you can also locate it via the Terminal:
http://theappleblog.com/2009/04/24/mac-botnet-how-to-ensure-you-are-not-part-of- the-problem/
As to the recent 'Conficker furore' affecting Intel-powered computers, MacWorld recently had this to say:
http://www.macworld.co.uk/news/index.cfm?email&NewsID=25613
Although any content that you download has the possibility of containing malicious software, practising a bit of care will generally keep you free from the consequences of anything like the DNSChanger trojan.
1. Avoid going to suspect and untrusted Web sites, especially *********** sites.
2. Check out what you are downloading. Mac OS X asks you for you administrator password to install applications for a reason! Only download media and applications from well-known and trusted Web sites. If you think you may have downloaded suspicious files, read the installer packages and make sure they are legit. If you cannot determine if the program you downloaded is infected, do a quick Internet search and see if any other users reported issues after installing a particular program.
3. Use an antivirus program like ClamXav. If you are in the habit of downloading a lot of media and other files, it may be well worth your while to run those files through an AV application.
4. Use Mac OS X's built-in Firewalls and other security features.
5. Stop using LimeWire. LimeWire (and other peer-to-peer sharing applications) are hotbeds of potential software issues waiting to happen to your Mac. Everything from changing permissions to downloading trojans and other malicious software can be acquired from using these applications.
6. Resist the temptation to download pirated software. After the release of iWork '09 earlier this year, a Trojan was discovered circulating in pirated copies of Apple's productivity suite of applications (as well as pirated copies of Adobe's Photoshop CS4). Security professionals now believe that the botnet (from iServices) has become active. Although the potential damage range is projected to be minimal, an estimated 20,000 copies of the Trojan have been downloaded. SecureMac offer a simple and free tool for the removal of the iBotNet Trojan available here:
http://macscan.securemac.com/files/iServicesTrojanRemovalTool.dmg

HT201077 I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

The following is from this Apple Document: iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
You need Mt. Lion in order to use Shared Photo Streams.
OT

Enabling Save for file download or linktoURL

Hi,
I have a file in a server path(which is little bit large and extension type is custom). I want to enable the user to save the file onto his local disk. I can use either linktoURL or FileDown Load for this. When I checked FileDownload, I cant enable save in Netweaver2004, mine is SP16. when it comes to the linktoURL, I am giving path name as reference.
So, How can I achieve this?.
Thanks,
Raj.

Hi
See this Thread
Re: Handling dynamically generated Images
Kind Regards
Mukesh

How do I enable "Save As" and disable "Save"

I have constructed a filable form in Adobe Acrobat Pro 8.1. The idea is to have this form downloaded to the users computer and used weekly to track expenses and each week to print and save a copy. The problem is that with save enabled it overwrites the original form and now the person must download another original. My question is; How do I enable "Save As" to be used with filled out forms while disabling the "Save" function after data has been entered on the form?
Thanks for any assistance,
Pat

OK Pat,
In LC Designer you would create a button with the following JavaScript in the click event:
app.execMenuItem("SaveAs");
This will bring up the Save As dialogue window.
This simplified solution will work; however if you want to be more specific in file name / path then you will run into security issues, which will require additional privileged script / certified solutions. There are some posts dealing with this:
http://forums.adobe.com/message/1357119#1357119
http://forums.adobe.com/message/1359267#1359267
While the solution may not be ideal, it will at least prompt the user to "Save As" instead of "Save" and the user will just have to be responsible for making sure they rename the file.
Good luck,
N.

Why is my detail page blank with no data from master page?

Hello,
I created master page that links to detail page - but when I click on the link I see the detail page empty from data.
Do you know why? Thanks!
This is the PHP code I'm using in the detail page:
<?php require_once('../Connections/connection1.php'); ?>
<?php
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = (!get_magic_quotes_gpc()) ? addslashes($theValue) : $theValue;
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "formUpdateSale")) {
$updateSQL = sprintf("UPDATE neve_sale SET type=%s, area=%s, address=%s, built=%s, lot=%s, BR=%s, floor=%s, floorAll=%s, parking=%s, elevator=%s, price=%s, available=%s, `date`=%s, status=%s, details=%s, myDetails=%s, pic1=%s, pic2=%s, pic3=%s, pic4=%s, pic5=%s WHERE `primary`=%s",
                       GetSQLValueString($_POST['type'], "text"),
                       GetSQLValueString($_POST['area'], "text"),
                       GetSQLValueString($_POST['address'], "text"),
                       GetSQLValueString($_POST['built'], "int"),
                       GetSQLValueString($_POST['lot'], "int"),
                       GetSQLValueString($_POST['BR'], "int"),
                       GetSQLValueString($_POST['floor'], "int"),
                       GetSQLValueString($_POST['floorAll'], "int"),
                       GetSQLValueString($_POST['parking'], "text"),
                       GetSQLValueString($_POST['elevator'], "text"),
                       GetSQLValueString($_POST['price'], "int"),
                       GetSQLValueString($_POST['available'], "text"),
                       GetSQLValueString($_POST['date'], "date"),
                       GetSQLValueString($_POST['status'], "text"),
                       GetSQLValueString($_POST['details'], "text"),
                       GetSQLValueString($_POST['myDetails'], "text"),
                       GetSQLValueString($_POST['pic1'], "text"),
                       GetSQLValueString($_POST['pic2'], "text"),
                       GetSQLValueString($_POST['pic3'], "text"),
                       GetSQLValueString($_POST['pic4'], "text"),
                       GetSQLValueString($_POST['pic5'], "text"),
                       GetSQLValueString($_POST['primary'], "int"));
mysql_select_db($database_connection1, $connection1);
$Result1 = mysql_query($updateSQL, $connection1) or die(mysql_error());
$updateGoTo = "admin-sales1.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
$colname_Recordset1 = "-1";
if (isset($_GET['primary'])) {
$colname_Recordset1 = (get_magic_quotes_gpc()) ? $_GET['primary'] : addslashes($_GET['primary']);
mysql_select_db($database_connection1, $connection1);
$query_Recordset1 = sprintf("SELECT * FROM neve_sale WHERE `primary` = %s", $colname_Recordset1);
$Recordset1 = mysql_query($query_Recordset1, $connection1) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
?>

11) opened iPhoto library package and I now have 'old masters' and 'Masters'
12) several years seem to be missing from these two folders
You got bitten by a nasty bug.
The upgrade of your library got interrupted, and some of your photos are still in the "Old ..." folders. There is no known fix for this, that can save your iPhoto library. We are still waiting for a bug fix from Apple. What you can do, copy out your original photos, that are still in the "Old Masters" and "Masters", and save these folders.
Then restore your library from your most recent backup and use the saved "Old " folders to reimport and add the newest photos, that are missing in your backup.
The "years" folders in "Masters" and "Old Masters" are the years, when the photos have been imported, not necessarily the years when the photos have been taken.

Does photoshop elements enable save for web for a batch of photos?

does photoshop elements enable save for web or ready for web for a batch of photos ?

Hi Patonabike,
You can batch save images as jpeg, png, tiff etc. using Process Multiple Files. This feature will even allow you to batch resize them (as long as they are the same orientation and aspect ratio). However, the resulting images may be larger than what you would get if you individually did 'Save for Web' because 'Save for Web' removes the photo's exif data (and Process Multiple Files won't).
With that said, it depends how you are editing your images and the results you are looking for, if you just want to rescale them or batch edit them - this is one way.
Hope it helps!
Clarice

Desktop screen saver Group policy enable settings & Supported file.

Dear All,
My requirement is i need to apply Screensaver to all my domain member computers using my DC Group policy.
Could you please guide me how can i create my own Screensaver for file and support format ( what is the software do i need to use to create Screen save ) and please confirm will windows 2008 server will support .ppt file as a screensaver file.
Operating system details,
DC : Windows 2008 ent server
Member machines : Windows 7 prof.
Regards,
Kumar V
Regards, Kumar.V

Hi,
I agree with SenneVL.
After you have created the .scr file that you want to apply, you may deploy the screensaver via the following group policy.
User Configuration\Administrative Templates\Control Panel\Personalization\Force specific screen saver
If you enable this setting, type the name of the file that contains the screen saver, including the .scr file name extension. If the screen saver file is not in the %Systemroot%\System32
directory, type the fully qualified path to the file.
Note: This setting can be superseded by the "Enable Screen Saver" setting. If the "Enable Screen Saver" setting is disabled, this setting is ignored,
and screen savers do not run.
For more information, you can refer to the following thread:
how do i deploy custom screen saver in group policy?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/60bd2b0e-58e9-46ac-83d2-3e4a4ab4de5d/how-do-i-deploy-custom-screen-saver-in-group-policy
Best Regards,
Erin

Enable save data locally / enable detail page generation

Similar Messages

Maybe you are looking for