Iphone application development, how to save data locally?

I am now developing a small application, need to be a small part of the data stored locally. Whenever a user when the next time you open this application, can call this data, the present flash cs5 iphone application development, can achieve this functionality?

answer -> http://forums.adobe.com/thread/514065?tstart=0

Similar Messages

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

IPhone application Development using C#

Hi Dear,
I am a c# windows developer. I am new for iPhone Application development. So could any one guide me how to start iPhone development using C#.
and which tools I need for developing. and please send the download links.
Thanks & Regards
Chandan Kumar Saw
[email protected]

I don't want to start a flame war or anything, but I'd think very carefully before using Mono. Don't get me wrong, it's a good system and improving all the time, but it's relatively immature and you might be letting yourself into a world of pain. Case in point: less than 30 minutes ago I used the Mono Develop IDE to check out a student C# console project.... For whatever reason, MD went horribly wrong; it pinwheeled continuously and refused to shut down in response to Force Quit. Even trying to kill it off in Activity Monitor failed. In the end I had to reboot OS X. Unfortunately this was not the first time I've had this experience with Mono Develop.
If your project is just a bit of fun, then by all means give it a try, but if you're a serious developer then be aware of the risks you're running with such new technology.
Bob

How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

How to save data model design in pdf or any format..?

how to save data model design in pdf or any format..?
i ve created design but not able to save it any mage or pdf format

File -> Print Diagram -> To PDF File

Enable save data locally / enable detail page generation

Under the behaviors tab on the display templetes I have checked "Enable Popup Menu", checked "Enable Save Data Locally" and checked "Enable Detail Page Generation". When you right click on the applet, some applets the "Data >" selection is disabled/grayed out for others it is not and works properly. I can get the data via the showDetailUsingGet() method. Works on most grid and chart applets but does not on some. Please help.

Typically this behavior would be attributed to the kind of recordset behind the applet . If it is dynamic (for example time based queries and you have enabled the auto refresh property of the applet , so with every refresh you have a new data set) then the data detail would be grayed out otherwise it would work as advertised.

IPhone Application Development

Elan Technologies offers iPhone Application Development,Mobile Application Development, PHP Development, Android Development & Latest ipad Application development services as per your needs.

For get best mobile application development services you shoud visit: http://mobile-app-development-companies.blogspot.com/ now.

CS 193P IPhone Application Development

I am a Windows developer, completely new to Apple. I would like to take the free online course CS 193P IPhone Application Development from Stanford. What hardware and software do I need to purchase? Thanks

You don't need anything but iTunes to view the course.
You'll need a recent model Mac running ML 10.8.2 and Xcode 4.5 to develop and submit apps.

Large (1gb+) iphone application development

I'm looking for experience in developing iphone applications with large data sets. I have a sqlite database that is 1gb+ and would like to include it with my application. Unfortunately, I cannot even get Xcode to run it on the simulator unless I reduce the database size substantially.
I'm wondering if there is a timeout setting somewhere that is getting triggered and killing the upload process?
When I try to run the large application on my device, I get the following error message:
"Operation could not be completed. (com.apple.dtdevicekit error 49164.)
I've thought of other alternatives, such as downloading the database inside the application, but am unclear if this is a desired workaround.
Anyone have any experience with developing large applications?

I've never built an app that was 1% of that size, but hope my opinion might be helpful to you anyway.
As you may know, the hard limit for an iPhone app bundle is 2 Gb. But just from basic engineering experience I'd say 1Gb+ is asking for trouble. In my opinion, the day when you succeed in getting that bundle loaded and tested is when your real problems will begin.
Is there any way to modularize that database? For example, could you put a small, starter database in the bundle and then let the user download additional modules from your website? I think such a design would not only be technically superior, it would also be better commercially.
I've read that most users don't look at the size of an app before downloading. I've never met that kind of user. When my kids download music, they count every Mb, and know exactly how much room they have left. If I saw Gb in an app store description I'd have to be very very motivated to read the rest of the page.
On the other hand, if the app was under 10 Mb, and the description explained that the app could be expanded one package at a time... Well, I'm sure you get the point. Of course making an extensible database out of SQLlite is going to be a nice project.. It's not called Lite for nothing. But that would be my goal.
Hope that helps!
\- Ray

How to Save Data from DataGrid to Excel Sheet?

Hi All,
I am trying to use Adobe Flex 3.0 for making web pages.
I want to save the data from DataGrid and Advanced DataGrid of Adobe Flex 3.0 to Excel Sheet file. I am trying Flex Help, but didn't find answer for it.
In the application there is a button for 'save' by pressing which the 'Save As' window should appear.
And giving the path to the '.xls' file, the data from DataGrid should be saved on that location in .xls format.
This is my requirement.
If anybody knows how to do this please help.
Thank You,
Sharad

Hi
Using document.applet.saveAsCSVFile(); code you can not get data in proper format.
For one of my application i have stored the data from Grid to excel.
But i am not sure about Adobe Flex 3.0, my code will work or not.
Also you need to make the "Initialize and Script Activex Control Not marked as Safe" as enabled in your IE.
You can share ur email. So that i can send the code. Here I am not able to paste the code.
Thanks

How to save data in CallableObject without completing the action

Hello,
we have a process with actions with callable objects. Some of these actions cannot be completed within a short time, but still are an "atomic task". Thus we'd like to save the data entered so that it is there again when calling the action at a later time again. This would also make it possible for the employee of a team to really take the task (eg. by pressing a button "take this task") and for the other to see, who is in charge.
How can data be written into the GP context (eg. LocalContext of the CallableObject), without completing the action (eg. by setting a result state)?
We do not want to build LoopBlocks where the same Action is called and completed multiple times, each time adding an other "Iteration X"-entry in the navigation.
Best regards,
Manuel Schaffner

Hi,
I dont think there is any way of passing data back to GP context without completing the callable object. If you wish to save the data locally then you can probably use CAF business objects.
Ashutosh

How to save data in a string control?

I want to save data in a string control or indicator. I know that I can rt-click and make the data default. But can it be done through a proberty node or something else when the program is running?

There isn't a "Make Current Value Default" method that you can invoke programmatically, this would require your VI to be saved when it was closed, which obviously couldn't be done if it had been built into an executable.
You could read the values from the controls/indicators and save them in a .ini file using the Configuration File VIs on the File I/O palette, and have some code at the start of your program that reads the values from the file and puts them into the objects using local variables.

How generate a XML file & how to save data in that file?

hi,
How to generate an xml file & how to add data in that xml file? is there anyone who can help me about this? Firstly i need to open a xml file and after that i need to save user data in that file? how i will do it? What will be the solution of this? please give me solution........
with regards
Bina

With an API like Xerces you can parse an XML document into a DOM tree. You can do modifications on that tree manually and then write it back out as XML data.
http://xerces.apache.org/xerces2-j/

How to save data to access database in dreamweaver

Hello,
I want to save data from webpage to MS access database. I am
using dreamweaver MX 2004 developing tool. For server side
scripting I am using asp page but I am not geting any result. And I
am calling this asp page using HTML codes (using "action").
Please anybody suggest me proper way for this.

Thanks for the reply....I'will try your suggestion
........But still I will appriciate if you can check my codes......
I am using following codes for webpages,
<form name="form1" action="add_to_database.asp"
method="post">
<div align="center">
<table width="80%" border="0">
<td><b>FEEDBACK FORM</b></td>
<tr> <td>Name :</td>
<td><input type="text" name="uname"></td>
</tr>
<tr>
<td>Email :</td>
<td> <input type="text" name="email"></td>
</tr>
<tr>
<td>Comments :</td>
<td><textarea
name="comments"></textarea></td>
</tr>
<tr>
<td> </td>
<td><input type="submit" value="Submit details"
name="submit" onClick="validate()" ></td>
</tr>
</table>
</div>
</form>
and using the action and post method I am calling following
asp page
<body>
<%
Dim uname, email, comments
Dim Conn
Dim Rs
Dim sql
uname = Request.Form("uname")
email = Request.Form("email")
comments =Request.Form("comments")
Set Conn = Server.CreateObject("ADODB.Connection")
Set Rs = Server.CreateObject("ADODB.Recordset")
Conn.Open "PROVIDER=Microsoft.Jet.OLEDB.4.0;" & "Data
Source=" & Server.MapPath("users.accdb")
sql= "INSERT into adduser(uName, Email, Comments) values(' "
& uname & "', '" & email & "', '" & comments
Conn.execute sql
Rs.Open sql, Conn
Rs.AddNew
Rs.Fields("Name") = Request.Form("name")
Rs.Fields("Email")=Request.Form("email")
Rs.Fields("Comments") = Request.Form("comments")
Rs.Update
Rs.Close
Set Rs = Nothing
Set Conn = Nothing
%>
</body>
Thanks,

How to save data aquired with NI mydaq and save it in a data base using Labview?

i have developped with labview an interface that can control automatic irrigation station using two sensors ( humidity sesonr and temperature sensor) so i want to save data aquired during a year in a data base so i can compare these results in the next year please help me to do that in my interface labview and thanks
Attachments:
PFE.vi ‏223 KB

There is a database toolkit for LabVIEW. I don't think it is a free download however. With the Data Manipulation toolkit, you can integrate with most databases that use the ODBC protocol.
If you don;t need anything fancy, you can write the values out to file using the write/read spreadsheet VIs. If the file is [COMMA] or [TAB] delimited, you can import it into your database with ease.
Another approach is to format you output to a text file as SQL, and import the records that way.
INSERT INTO TEMP_HUM_TBL (Temperature, Humidity, Txn_Date)
VALUES (30, 95, 'Dec-24-2013');
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

Iphone application development, how to save data locally?

Similar Messages

Maybe you are looking for