Oracle Dataguard Help
I am trying to setup oracle dataguard(10g) in logical standby mode and i'm getting this error.
Could anyone please help me with this
SQL> alter database create logical standby controlfile
2 AS 'D:\oradata\PRIMARYDB\STANDYCTL.ctl';
alter database create logical standby controlfile
ERROR at line 1:
ORA-06550: line 1, column 36:
PLS-00201: identifier 'DBMS_LOGMNR_D.STORE_IN_REDO_LOGS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
when i am trying at the standby server to get into managed recovery mode i am getting this error. Any ideas why??
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
ERROR at line 1:
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 1: 'D:\ORADATA\STANDBY\SYSTEM01.DBF'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'D:\ORADATA\STANDBY\SYSTEM01.DBF'
The trace file doesn't mention much about the error except:
The process cannot access the file because it is being used by another process.
Message was edited by:
user636794
Similar Messages
-
How to configure Oracle Dataguard for Oracle 10g database
Hi Friends,
I would like to configuer Oracle Dataguard for my Oracle 10g Database.
Please provide me the configuration document.(step by step guide)
Regards,
DBHi
Go throw below link. This would be help to configure ODG..,
http://blogs.oracle.com/AlejandroVargas/2007/09/data_guard_physical_standby_im.html
http://blogs.oracle.com/AlejandroVargas/2007/10/data_guard_broker_observer_and.html
Thanks,
Mayilselvan.S -
ABAP+JAVA stack and oracle dataguard
Hi all,
I use Oracle Dataguard for my Data recovery System.
How can I manage tha Java part of nw2004s. In case of failover or switchover, the ABAP part is OK but the J2EE cannot start.
Thank's for your help,
Regards
Oracle 10.2.0.2 on Windows 2003 x64 R2It's ok guys. I just replace the j2ee/cluster directory of standby system by the one of source system.
The j2e engine can be started. -
Oracle DataGuard Logical Standby
Hi , I'd like to know what are the premisses to make a standby logical replication.
I have two environments (production and standby) with different number of processors and storage.
I'd like to know if it's possible to create data guard solution with these two environments and what are the premisses that I need aware to install the solution.
Thanks in advance.Hello;
Yes the storage ( as long as you have enough space ) and cpu don't matter.
You can use hardware that's quite a bit different and it will work fine.
You can also create a Logical Standby fro a physical standby.
These notes may help :
NOTE 413484.1 - Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration
Mixed Oracle Version support with Data Guard Redo Transport Services [ID 785347.1]
Logical Standby's don't seem to be very popular and the support base suffers because of this. I would consider a physical standby with Active Data Guard if costs allow.
Active Data Guard makes an excellent "Reader" database plus I believe your switchover and failover options are much better than a Logical Standby.
Oracle DataGuard Logical Standby Setup :
http://orajourn.blogspot.com/2007/02/setting-up-logical-standby-database.html
http://garyzhu.net/notes/DataGuard.html
Best Regards
mseberg
Edited by: mseberg on Apr 25, 2012 10:07 AM -
How to configure oracle dataguard for connecting to the second nic.
hi
i want deploy my oracle dataguard on a remote site on a separate lease line
and on the second nic of the primary. i just have a concern that what
configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
data and the second nic is being planned for replication only.
so how standby will come to know that it has to pick which one of then.
waiting for an early reply
manish lall
[email protected]thanks for the reply
does that mean nothing is to be needed to configure for oracle standby as such.
can you give me some idea of how this ip routing configuration will be done -
Hello,
I am new to Oracle and sql. I am working on the Oracle
Reports. Can anyone suggest me where will be the best place to
get help on this. Any suggestions will be appriciated.
Thanks
SamHi Sam..
I'm also quite new in field of Oracle Reports, I have already
had experience in Oracle Database Server. I think you may refer
to the Oracle Reports help coming with your s/w, that's good for
first understanding. Then.. I just find out that this forum is
also helpful with many nice and "willing to help" people.
Well... wish you all the best and go ahead with your new job!!
kr,
daniel -
Hi,
I have just got the login details of Oracle Support.
I have some Q's regarding client site and want to post on metalink to seek Oracle experts help
How I can do that?
ThanksHi 787186 ;
Yes, I read to use the button, but just couldn't found the create SR button
I'm service requests tab
can't find the buttonIf you have open SR permission(your admin can give that right to you) than Service Request tab next to Knowledge tab on metalink main page.
Please contact wiht your Metalink admin and ask for you have permisson for can create SR or not?
Regard
Helios -
Hi,
Can anyone send me oracle 10g help file. which file has information about the exceptions.
Uttam SInghPavan Kumar wrote:
Hi,
Are you referring to PL/SQL Exceptions or Error Messages.
With respect to PL/SQL Exceptions -
Refer to : http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/errors.htm
and
http://download.oracle.com/docs/cd/B10500_01/appdev.920/a96590/adg10pck.htm
- Pavan Kumar NPavan
One book is of 11g, another of 9i, neither is of 10g whicj is of OP's version.2ndly, even PL exceptions are listed in the error book given already Orionnet.
Aman.... -
ORACLE DATAGUARD and STANDBY on two LINUX machine (64 bits and 32 bits)
Hi there
I have two Linux machines: one with Linux RH 4 Update 2 for 64 bits and
the other one with Linux RH 4 Update 2 for 32 bits.
I was wondering two things:
1) Is it possible to implement ORACLE DATAGUARD between these two machines?
2) Is it possible to implement only a Static Standby Database on the second node?
Suppose we have Oracle Database EE on both machines.
Thanks in advance for any information
Regards
FelipeBut both oracle database version must be of 32 bit version.
from oracle doc
2.3.1 Hardware and Operating System Requirements
The following list describes hardware and operating system requirements for using Data Guard:
All members of a Data Guard configuration must run an Oracle image that is built for the same platform.
For example, this means a Data Guard configuration with a primary database on a 32-bit Linux on Intel system can have a standby database that is configured on a 32-bit Linux on Intel system. However, a primary database on a 64-bit HP-UX system can also be configured with a standby database on a 32-bit HP-UX system, as long as both servers are running 32-bit images. -
We have an Oracle 9i Database Standard Edition that is in production for about 3 years running on Windows 2003 Server Standard Edition. Our company does not have Oracle DBA. When we purchased Oracle license we didn’t sign up for Oracle Support.
If something goes wrong with Oracle Database, if we could not figure out the solution on our own, is there any company that provides Oracle DBA help on a contract basis?
What happens if we get internal errors in the database? Can we still contact Oracle Support?
Please advice.#1. When you purchased Oracle Licenses, I guess Oracle would have provided (Support Identifier or CSI numbers), with that you should be able to create accounts/access with METALINK, which is one form of support Oracle provides. 99.99% of the day-to-day problems are resolved via metalink, oracle forms (like this) and other discussion threads.
#2. But if you want Oracle personnel onsite, then it needs a different contract or support level, which is very expensive in my opinion. There used to be different support levels like platinum, gold, silver etc., I'm not sure of the classification now, better contact Oracle for additional info.
I would highly recommend for #1, check the cost involved in #2 compare that with that of hiring a part-time/remote DBA, and see which one works better. If your database is not mission critical, configuring proper back and restore would help bring your database up, but with some downtime.
Hope it helps,
Babu Rangasamy -
Applying oracle patchset in oracle-dataguard environment
Hello There,
I wish to apply oracle patchset in oracle dataguard environment.
can you please let me know the steps that has to be taken on Primary & standby database?
is there any specific document for this?
DB - oracle 10.2.0.4
OS - Linxu x86_64
Best Regards
Sachin BhattHi Sachinn,
To patch primary site, you can find the detailed infirmation in readme.html, in the patch zip file. Additionally, at the standby site, In order to apply the patch;
1) stop the log shipment
2) stop the oracle related services
3) patch the Oracle
4) Startup migrate
5) execute the SQL scripts
6) start the log shipment
Check the link below;
http://dbaforums.org/oracle/index.php?showtopic=17398
Best regards,
Orkun Gedik -
Im unable to download the oracle dataguard tool.
please give me the details that, how i can download this tool
and how to setup oracle dataguard for my database.Data gaurd is available only with Database enterprise edition.
For more details you can refer
http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/toc.htm
Cheers,
Vigneswaran
oraclesupports.com -
Enabling Oracle Dataguard modes?
There are 3 modes in which Oracle dataguard works-Maximum Protection, Max availability and Max performance. How do I set any one of these? whats the process?
I have implemented a dataguard standby using manual steps,now I would like to see the GUI tool-Dataguard Broker to manage it..but I did not see it listed in my windows programs under Oracle?How do I start this Broker?
Thanks,
SandeepYou didn't indicate the version of your database. Assuming it to be oracle10g and if it is so and want to mange the dataguard configuration using GUI, you would be needing Grid Control and agents on primary and standby servers and of course DG broker. This would be accessible over your internet browser and is not associated with any programs/menu items under windows.
HTH
Thanks
Chandra Pabba -
Hello Gurus,
I am new to Oracle Text so i need your valuable inputs in resolving an issue i am facing.
Here is the table definition and sample data:
create table test ( a varchar2(100));
insert into test values('Hello How are you');
insert into test values('Just to say you Hello');
insert into test values('I know you');
insert into test values('you know');
insert into test values('you may not know me');
insert into test values('do i know you');
SQL> SELECT * FROM test;
A
Hello How are you
Just to say you Hello
I know you
you know
you may not know me
do i know you
6 rows selected.
If user enters search criteria ('you know', for example); i need to return all the records having 'you' AND 'know' anywhere. Hence for search criteria 'you know', i should get following records:
I know you
you know
you may not know me
do i know you
Similarly, i need to return below records for criteria 'hello you':
Hello How are you
Just to say you Hello
Can Oracle Text help me here?
Thanks in advance for your help.
regards,SQL> create table test ( a varchar2(100))
Table created.
SQL> insert into test values('Hello How are you')
1 row created.
SQL> insert into test values('Just to say you Hello')
1 row created.
SQL> insert into test values('I know you')
1 row created.
SQL> insert into test values('you know')
1 row created.
SQL> insert into test values('you may not know me')
1 row created.
SQL> insert into test values('do i know you')
1 row created.
SQL> create index test_idx on test (a) indextype is ctxsys.context
Index created.
SQL> var str varchar2(100)
SQL> exec :str := 'you know'
PL/SQL procedure successfully completed.
SQL> select * from test where contains(a,:str) > 0
A
I know you
you know
you may not know me
do i know you
4 rows selected.
SQL> exec :str := 'hello you'
PL/SQL procedure successfully completed.
SQL> select * from test where contains(a,:str) > 0
A
Hello How are you
Just to say you Hello
2 rows selected. -
Using Oracle Dataguard 10g With Oracle EBS
Hello,
I am working on Linux with Oracle Database 10g and Oracle EBS R12 and trying to configure Oracle Data Guard with Oracle EBS. I have been reading Oracle My Support Document (Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1] ).
Please let me know of any another useful documents. It will also be helpful if anyone could share real time experiences.
Thank you.Hi,
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
http://www.oracle.com/technetwork/database/features/availability/dataguardoverview-083155.html
Regards
Yoonas
Maybe you are looking for
-
I have all my family pictures and videos on my macbook pro. Me and my wife have separate apple ids and both of us hold iphones and ipads. I would like to know if it´s possible to have both of our accounts registered on Iphoto so that all we photograp
-
Hi, my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?
-
How to create web-screen for own-created program
Hi experts! Could you please suggest me: Some of our end-users have to work with WEBGUI interface. In T-code VL02N we have our userexit SAPLZSDEXIT (Screen 0110). And in WEBGUI we don't see this tab in VL02N. I think I have to generate web-interface
-
Using Address Book, distribution list contact does not appear
Using 10.7.4, added a name to an address book distribution list but it does not appear in the email "to" address. Had added to people previously and it worked fine but not with the last entry. Verified that the contact's name, address, etc. all corre
-
Making a new component paint over top of others.
Hi, I'm trying to make my own custom component (by extending Component). In the paint method, I just would like to draw a rectangle of some size at a certain point on the screen. I want this rectangle to be able to be drawn over top of any components