Enabling the web server in an executable for LV 8.6

I just upgraded form LV 7.1 to LV 8.6. In 7.1 I built a boat load of executables that had web server capabilities. That is the customer could view and operate the VI from any computer via Internet Explorer. It was very simple to do.
In 8.6 the web publishing tool is the same as is the enable web server function under tools>Options. In 7.1 app builder, I would include the HTML files in a www directory under the target's root then I would simply open the tools>options menu and enable the server on the executable. It's not there anymore.
For the life of me I cannot figure out how to do this in 8.6. I've spoken to (2) people at NI Support and it didn't help. They were probably in high school when 7.1 came out.
I've figured out how to use project explorer to build both an application and installer build. I put the HTML files into a www folder under windowsvolume folder which is supposed to be the root. The executable works fine except for the web server.
It must be something simple. If anyone can help, I would appreciate it.
Message Edited by technics on 12-02-2008 02:18 PM

I'm sorry to hear that the NI support people you talked to weren't able to help you.
There have been a few threads on this subject that you might find helpful:
http://forums.ni.com/ni/board/message?board.id=170&message.id=351396#M351396
http://forums.ni.com/ni/board/message?board.id=170&message.id=354555#M354555
It is a little more complicated than it was in 8.5. We are working to make it as simple as possible.
I am always interested to hear what problems you have so we can improve the feature.
Nathan

Similar Messages

VIP Failover at the web server level??

Oracle10gR2
RHEL 4 AS 64bit
Hi,
I wanted to know is the VIP failover at the web server level also? For example, we are running Apex and that uses Apache/HTTP webserver, if that were to go down on one node, would it failover to the other node? Or is it not at the webserver level?
Thank you.

Yes, thank you for the documentation.
However, I had one question about an action script that is in the following documentation:
http://www.oracle.com/technology/products/database/clustering/pdf/Using_Oracle_Clusterware_to_protect_Oracle_Application_Server.pdf
In there in APPENDIX B is a script called webcache_action.scr. I modified this script to use in our environment to start and stop the http_server process. We have been having some problems with it...mainly when it fails over, it shuts down the http server, then brings it back up, then down again. This is happening in a production system so it's a big issue. My question is can you explain to me why that is happening and maybe also explain what the script is doing? Maybe I'm missing something. Do I even need to have the stop part in the script? All we need to do is when it fails over to startup the http server on the node, that's it! Any help would be appreciated.
#!/bin/bash
SCRIPT=$0
ACTION=$1
# Action (start, stop or check)
ORA_OWNER=oracle
# ORACLE installation owner
ORA_HTTP_HOME=/opt/app/oracle/product/10.2.0/http_1
# ORACLE_HOME of HTTP Server
RET1=1
# Internal return values ( do not change )
RETVAL=1
# Script return value
# Main section of Action Script - starts, stops, or checks an application
# This script is invoked by CRS when managing the application associated
# with this script.
# Argument: $1 - start | stop | check
# Returns: 0 - successful start, stop, or check
# 1 - error
# Start section - start the process and report results
case $1 in
'start')
ulimit -n 65536
ulimit -u unlimited
echo "DATE: `date`" >> /tmp/e
echo "ulimit: `ulimit -n`" >> /tmp/e
echo "ulimit: `ulimit -u`" >> /tmp/e
# A) START - HTTP Server:
$ORA_HTTP_HOME/opmn/bin/opmnctl startproc ias-component=HTTP_Server 1>/dev/null 2>&1
RET1=$?
# Prepare return values:
if [ ${RET1:-0} -eq 0 ]; then
RETVAL=0
else
RETVAL=1
fi
# Stop section - stop the process and report results
'stop')
# A) STOP - HTTP Server:
$ORA_HTTP_HOME/opmn/bin/opmnctl stopproc ias-component=HTTP_Server 1>/dev/null 2>&1
RET1=$?
# Prepare return values:
if [ ${RET1:-0} -eq 0 ]; then
RETVAL=0
else
RETVAL=1
fi
echo "usage: $0 {start stop}"
esac
echo "RETURN: $RETVAL" >> /tmp/e
# Return value to CRS daemon:
echo "RETVAL: $RETVAL" >> /tmp/e
if [ $RETVAL -eq 0 ]; then
exit 0
else
exit 1
fi
#exit 0

Imp:How to find out whether client authentication Enabled on the Web Server

Hi,
I am trying to find out whether the Client Authentication Enabled on the Web Server or not.
Reason for doing this, if we have two certificates in the key store which will authenticate the Web Server, JSSE Authentication will always take the first cert from the keystore. If the first Certificate is Expired, it will fail while doing the HandShake.
So if I can find out whether Client Authentication is Enabled or not, then I can prompt a dialog for the user to select the Certificate for the Hand Shake.
Thanks in advance for any Response,
Krish.

AUTH_TYPE will tell you only if it SSL or not. It won't say whether the Client Certificates Required for SSL Connection.
Also, AUTH_TYPE is not part of the Http Headers.
If there is any other solution, greatly appreciated.
Thanks
Krish.

What am I doing wrong when running multiple applications with the Web Server enabled ?

I am running multiple Vi's (applications) on the same Nt Workstation and the Web Server is enable for all applications. However, I am able to view only one Panel from the browser. Only the first application that is started can be viewed. What am I doing wrong ?

Only one application can act as a web server at the default http port 80.
To solve this either run all VIs into a single application or use different
http ports for each application. For example an application can use the
default port 80 and others use ports 8080, 8081, 8082 etc.
In the browser, you enter the URL for non default ports as
http://hostname:8080/...
HTH
Jean-Pierre Drolet
"zemaitis" a ecrit dans le message news:
[email protected]..
> I am running multiple Vi's (applications) on the same Nt Workstation
> and the Web Server is enable for all applications. However, I am able
> to view only one Panel from the browser. Only the first application
> that is started can be viewed. What am I doing
wrong ?
LabVIEW, C'est LabVIEW

UWL: enabling the web GUI for html for work items

Hi,
We have configured UWL in portal. All the backend work items are appearing in the UWL iView in portal.
But when we click on some of the work items SAP GUI opens instead of web GUI for html.
Does any one have information what needs to be configured in UWL configuration xml file so as to enable the web GUI for html for rest of the work items?
Regards
Sk

Hi,
We have configured UWL in portal. All the backend work items are appearing in the UWL iView in portal.
But when we click on some of the work items SAP GUI opens instead of web GUI for html.
Does any one have information what needs to be configured in UWL configuration xml file so as to enable the web GUI for html for rest of the work items?
Regards
Sk

Specification for the Web server

Hi All,
We have BW3.5.
Presently web server is running in the production box itself.
We are planning for a separate box for the Web server.
Please give me the tips for the hardware config for the Webserver.
Thanks
Billy

Hi,
1) Currently there is no WSRP or JSR support
but this will be soon "standard" for all portals!
2) Device detection is available. Mobile Access pack will
be available soon. (It is available now for portal 3.0)
Cheers,
Alex :-)

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Reboot just the web server for SRW224G4 switch

Hello all,
I just bought Linksys SRW224G4 switch for office usage.
Upon programming the switch through the web interface using IE7 suddently the web interface froze.
So I just closed IE and try to get back to the web interface but with no luck. Its like the pages no longer there.
After an extensive search in this forum, the only remedy at this time is to hard reboot the switch and the web interface is working again.
My question is: is there a way to just SSH/Telnet/Console into the switch and restart just the web server instead of rebooting the entire switch ?
If there is no way at present, maybe this can be made available for the next firmware release ?
Thanks,
Ben
SRW224G4
Boot Version: 1.0.2 (Date: 17-Aug-2006, Time: 14:55:46)
Software Version: 1.2.1b (Date: 31-Aug-2006, Time: 13:47:21)
Hardware Version: 00.03.00

Hi. I know that restarting just the web user interface alone is not an option for the switch. However, its not normal for the web user interface to freeze up. Maybe you should try using IE6.

How to Restart the web server

Hi,
on tools 8.49 on Unix AIX, I'm reading this
E-WL: What is Verbose Garbage Collection (verbosegc) and How do I Enable it on WebLogic? [ID 759137.1]
and it is asked to :
2. Restart the web server
How should I do that ?
Thank you.

If it is restart, then you need to stop it first and then stat it again.
cd $PS_HOME/webserv
ls
(then you find your domain directory)
cd <your domain directory>
cd bin
./stopPIA.sh
(wait for conclusion)
./startPIA.sh

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Hi Aloolaab,
I understand that you're trying to enable web services on your printer. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.

B110a Trying to enable the Web Services Error message received

I am trying enabled the Web Services but I get the Error Message 'There was a problem connecting to the Server"
I get the same when I try to update the firmware but the printer is connect to a wireless network with internet connection and no firewall.

Hi Confused_Techie, Hope you are doing well and having a great day;
I will first try using the Network diagnostic utility.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/n...
Hope this can identify and solve the issue for you.
If not than please include the operating system you are using and the build of the Operating system i.e. Win 7 sp1 64 bits. As well as router you are using. Also please take the time to add as much information that you may consider relevant. This will give you a better chance of getting an answer from not just me but other member of the community as well.
Cheers;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Communication problem the web server extension (WGATE) failed to receive a

Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PK

HI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel.

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.

Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support

Enabling the web server in an executable for LV 8.6

Similar Messages

Maybe you are looking for