Encore 2 MOTION MENUs not looping more than 2x

Gidday Neil & techies:
I have created a wedding DVD. Burnt & both original Motion Menus looped forever. Did some alts, re-burnt DVD ... Now, one of the Motion Menus loops 1-2 times, then randomly plays one of the movies.
(Definitely set to 'loop forever'.) I have re-re-rendered the motion menus, etc. etc. Still no luck.
Hmmmm...

Awesome. I checked out the other thread, and I didn't find the solution directly, but somewhere they mentioned "layers" and I realized how ignorant I was. The background layer was turned on by default, so I couldn't see the video that was playing behind it. I just toggled it off and presto! The menu works.
Thanks again.
Date: Fri, 17 Feb 2012 08:57:30 -0700
From: [email protected]
To: [email protected]
Subject: Encore 2.0 motion menus not previewing?
Re: Encore 2.0 motion menus not previewing? created by John T Smith in Encore - View the full discussion
Here is another recent discussion... may help (or, of course, may not)
http://forums.adobe.com/thread/962166
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4213135#4213135
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4213135#4213135. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Encore by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Encore cs5 motion menus not working when build to flash

Hello my question is this, I have created a dvd in encore cs5. I have created motion menus in AE.
Everything works great when I build to DVD. However when I export to flash my animated menu is working but the buttons (play move, chapter select , extras) do not show up until the animation is complete. Is this a simple fix? or should I make the menus static?

Hmm... what version of the Flash Player are you testing with
(full version, including release number)? You can find out which
version you're using here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507
-Robert

Encore 2.0 motion menus not previewing?

I have been having some trouble with motion menus...I got a copy of Encore 2.0 several years ago and it worked fine then. I recently had a need for it again so I re-installed it and started a project.
My problem is that even with the video transcoded, added to the menu, and the motion menus rendered, it doesn't show up in the preview. I can hear the audio, but it doesn't show the video. After tinkering with this for a little bit I went ahead and burned a disc, thinking that my problem was just a preview issue. The finished disc also doesn't work. You hear the audio and the buttons and timelines work fine, but no motion menus.
I found a discussion on here a while back about changing registry entries (for when Encore gets hung up on importing) and I had a similar issue. I tried that and it worked. I wondered if something similar may be causing the motion menus not to work.
I should mention that I tried re-installing Encore with no such luck.
Any ideas?

Awesome. I checked out the other thread, and I didn't find the solution directly, but somewhere they mentioned "layers" and I realized how ignorant I was. The background layer was turned on by default, so I couldn't see the video that was playing behind it. I just toggled it off and presto! The menu works.
Thanks again.
Date: Fri, 17 Feb 2012 08:57:30 -0700
From: [email protected]
To: [email protected]
Subject: Encore 2.0 motion menus not previewing?
Re: Encore 2.0 motion menus not previewing? created by John T Smith in Encore - View the full discussion
Here is another recent discussion... may help (or, of course, may not)
http://forums.adobe.com/thread/962166
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4213135#4213135
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4213135#4213135. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Encore by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Not uploading more than 150 rows from Excel file to Internal table.

Hi All,
We have a Z program to upload initial stock from excel file to SAP using BAPI. The problem is we have defined row to '65536'. But it is not uploading more than 150 rows at a time. The piece of code is given below.
DATA : it_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA: xcel TYPE TABLE OF alsmex_tabline WITH HEADER LINE.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '3',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
PERFORM upload_excel_file TABLES   gt_out
                              USING   p_file
                                      gd_scol
                                      gd_srow
                                      gd_ecol
                                      gd_erow.
FORM upload_excel_file TABLES   gt_out
                                   "Insert correct name for <...>
                        USING    p_p_file
                                 p_gd_scol
                                 p_gd_srow
                                 p_gd_ecol
                                 p_gd_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
DATA : ld_index TYPE i.
FIELD-SYMBOLS: <fs> TYPE ANY.
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename    = p_p_file
      i_begin_col = p_gd_scol
      i_begin_row = p_gd_srow
      i_end_col   = p_gd_ecol
      i_end_row   = p_gd_erow
    TABLES
      intern      = lt_intern[].
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
      MOVE lt_intern-col TO ld_index.
      ASSIGN COMPONENT ld_index OF STRUCTURE gt_out TO <fs>.
      MOVE lt_intern-value TO <fs>.
      AT END OF row.
        APPEND gt_out.
        CLEAR gt_out.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.
Plz tell me, what is the problem here. I want to upload all the rows at a time.
Thanks,
With regards,
Rosaline.

Hi Rob, I confirm, you're nitpicking! :-D For information, I've noted a few SAP comments about releasing and released objects, for people who like reading: [SAP Library - Documenting and Releasing a Function Module|http://help.sap.com/saphelp_nw70/helpdata/en/d1/801f50454211d189710000e8322d00/frameset.htm], [Note 109533 - Use of SAP function modules|https://service.sap.com/sap/support/notes/109533], [Note 415983 - Modification/customer developments of SAP function modules|https://service.sap.com/sap/support/notes/415983]; Example of an unreleased BAPI -> [Note 577453 - Using BAPI BAPI_DELIVERYPROCESSING_EXEC|https://service.sap.com/sap/support/notes/577453]
Sandra

Purchase Order Quantity should not be more than PR quantity

Dear all,
We want to control Purchase Order quantity against Purchase Requisition.
We have configured message setting 00 076 as ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
Is there any other way to have such control? please provide other available options to configure.
Regards
Kant

Hi,
06 076 is only for applicable only in case of material.
For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
NOtes 786736
This may help u !
Regards,
Pardeep malik

Can not sync more than one photo folder to my phone. lost all photos???

Can not sync more than one photo folder at a time from my computer to mu iPhone. How do I get the drop down box to choose my photos, so I can manually pick photo folders???? Lost all my photo folders on phone.

Create a parent folder on your computer to contain the folders of photos you want transferred to your iPhone. Select the parent folder under the Photos tab for your iPhone sync preferences with iTunes. To add an additional folder of photos to your iPhone, place the folder of photos in the parent folder followed by a sync.

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

P1006 - networked with XP and VIsta-64 not printing more than 2 pages

Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

Firefox will not open more than one window and upon restarting will not open the previous tab and refuses to open bookmarks

Firefox does not open more than one window. I can open plenty of tabs, but not more than one window. Upon closing firefox and trying to restart the browser will not open and needs to be closed through windows task manager. Upon trying to re-open Firefox I receive the 'oops this is embarassing , firefox cannot re-open your tabs" message. When I click on "new session" the bookmarks do not load. It is becoming very frustrating as I am a student and often do lots of research on the web while using lots of open windows.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

HD-DVD created with DVDSP will not use more than one subtitle track

I have made an HD-DVD with DVD Studio Pro 4.1.2, and added 4 subtitle tracks. When I play the dvd on a Toshiba A1, Apples DVD player and in the emulator I can change the subtitle track in the way that I can see the country code is changing, but no matter what it will only show me the subtitles from the first subtitle track. If I try to change the subtitle track using the remote, I can only turn the first subtitle track on and of, not switch between the different subtitle tracks. I'm a skilled dvd author, and have had several other authors look into the project finding no errors in my programming, so could this be a bug in DVD SP? Does it not allow more than one subtitle track?

Could be a bug in DVDSP. Also could be a bug in the players firmware. DVDSP never really made it has a fully functional HD DVD authoring tool.

Residual payment should not allow more than Vendor Invoice

Hi,
Eg: Vendor has booked invoice 5000 INR, when user make payment through F-53 or F-58 through "Residual" payment user can pay more than invoice 5002 INR and below accounting entry is posting.
Bank Cr 5002 INR
To Vendor Dr 5000 INR (Invoice amount)
To Vendor Dr 02 INR Excess than invoice
Business requirement is system should not allow pay more than invoice amount. How to control suggestion would be appreciated.
I have done below settings for your understanding here system configuration.
1. OBA3: Under "Permitted Payment difference" zero for Gain , Loss , Amount, Percent & Adjust Discount By However "Permitted Payment Differences for Automatic write-Off(Function code AD)" zero.
2. OBA4: Cash discount per line item: Zero and Under "Permitted Payment difference" Revenues, Expense, Percent & Cash discount put Zero.
Regards,
Babu.

Hi Prashant,
I have restricted many fields to use through screen variant now user can not pay more than Invoice amount except through Residual payment process.
Client side management strongly says that they want to use Partial and Residual payment process options but user should not allow pay more than invoice amount.
If any solution please guide me.
Regards,
Babu.

Encore 2 MOTION MENUs not looping more than 2x

Similar Messages

Maybe you are looking for