Encore and imgdvd problem

ok i was told that img dvd is the way to go for making dvds with encore. now the first few work ok but now all when it burns a dvd it does not work in dvd players but will work on my laptop. does any one know what i did wrong?

but now all when it burns a dvd it does not work in dvd players but will work on my laptop
This is most often caused by one of two things:
1.) media used
2.) speed of the burn
This ARTICLE will likely help you get the best possible DVD's.
Good luck,
Hunt

Similar Messages

CS4 Encore and Photoshop problem

Hello. I was using CS4 Encore and opening a pre-packaged menu (Lakeside) and used the right-click "edit in Photoshop" option. I've used it before without trouble, but it's been a while. I'm seeing several oddities now and don't know what's going on.
1) Right-clicking in Encore and choosing "edit in Photoshop" opens Photoshop but not the actual file. It just goes to a blank screen in Photoshop.
2) If I open the file manually and make changes, they don't save. As in, literally, the file doesn't save. I can choose save and it doesn't return an error, but every time I choose "close" or "exit" I get the prompt to save again, and after saving if I force quit or something then the file does not exist in my target drive or update in Encore.
I tried re-associating .psd files with Photoshop but it didn't work (they also appeared to be already associated). I haven't made any changes lately that I'm aware of.
Thanks.

Well, I like "gremlins."
Only thing that I can think of, would be if the Library Menu PSD was Read Only, but that should have yielded an error message to that effect.
Also, the first thing that one normally sees is the warning about PAR (Pixel Aspect Ratio), as all Menus, not designed for BD (Blu-ray Disc) will have a PAR for non-square pixels. A full HD Menu will have a PAR = 1.0 (Square Pixels). That warning is just a reminder about the display, which will be Square Pixels, even though the PAR is not 1.0.
One oddity, that I have encountered, but on a very limited and random basis, is where the Save from PS does not always update back through the link to Encore. Seems to happen about 1:10 +/- basis. Because I am often working on multiple Menus in a session, I just make sure that I do a Save at least 3x, during the editing process. Why 3x seems to be the magic number is unknown, but then, it always works for me (a few others have found similar issues with Save not updating, but not many). I just do my editing, hit Save (or Ctrl-S), then close up my Layer Sets, and hit Save, or Ctrl+S again, study my work, and do one last Save, or Ctrl+S. That has always worked perfectly, and the Menu does always update in Encore.
Yeah, probably gremlins...
Good luck,
Hunt

Encore CS3 - Hangs and import problems with menus and avi footage with audio tracks present.

I'm trying to import some footage files in .avi format into Encore CS3 and am having several problems.
In what follows when I say "crash" I mean Encore quits with a standard Windows error. When I say "hang" I mean Encore does not quit but rather becomes an unresponsive process that must be killed manually using Windows Task Manager.
My System:
WinXP Pro SP2
2.93 GHz Intel Celeron CPU - single core
Intel PERL mobo
3GB 400MHz RAM
NVidia 7800GS video
I mention these specs however I am not experiencing any hardware
related bugs or issues (like out of memory or video driver crashes
etc) when using any CS3 app.
The footage files (as reported by GSpot) and problems I am seeing. In all cases GSpot reports that I have the appropriate codec installed:
footage1.avi - Dx50 XVid 1.0.3, Dolby AC3 48kHz 192kb/s, 716834 KB
Attempting to import as timeline causes Encore CS3 to hang.
Importing as an Asset allows it to import but when I try to click
on it in the project windown to add it to a new empty timeline,
Encore hangs. It plays fine in Windows Media Player.
footage2.avi - Dx50 XVid 1.0.3, MPEG-1 Layer 3 48kHz 128kb/s, 718302 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no audio.
footage3.avi - Dx50 XVid 1.0.3, MPEG1-Layer3 48kHz 112kb/s, 717606 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no
audio. I tried converting this one using AVS to both MPEG3 and DivX,
each using MPEG1-Layer3 44kHz 192kb/s audio, and got the same issue
upon importing into Encore CS3. I also loaded it into Camtasia
Studio and it looked fine over there. The audio was present and I
was able to export it as a .WAV file. When I tried looking at the
file in Soundbooth CS3, there was no audio track or, more
accurately, the audio track was a flat line.
By way of comparison these are importing perfectly:
footage4.avi - XVID XviD 1.1.0 Beta2, MPEG1-Layer3 48kHz 189kb/s Two mono
channels LAME3.96r, 717436 KB.
footage5.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage6.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage7.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717502 KB
footage8.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717180 KB
footage9.avi - XVID XviD 1.1.2 Final, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 2291904 KB
Although this one imported & transcoded correctly, when I went to
build it to a DVD image file I got some strange errors during the
"planning video" stage that prevented the process from completing.
Unfortunately I neglected to write down the error message I recieved
which read like quite nonsensical babble to me, and I have since
deleted the project folder. I remember it was not a memory or
display related error and it included a timestamp where the error
was happening. I played the footage in the preview panel thru the
identified timestamp but it previewed perfectly without even a
jitter in either the video or audio. Took forever to transcode so I
doubt I'll be doing this one again anytime soon.
Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the

Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the remote control to make it appear. Other than that it seems to play ok in that player. Also tested it in 2 other DVD players (a Panasonic and Zenith) and it worked just fine like it's supposed to in them. Also plays perfectly in my computer's DVD player/burner using Windows Media Player v10. I tried burning to Memorex +RW single-layer single-sided disks at 6, 7, & 8Mbps project settings but got the exact same result every time.
Encore CS3 crashes fairly often during authoring, particularly during imports, and when I go to edit things like calling up a timeline in the timeline panel, dragging footage into an existing timeline, or changing button links in a menu etc.. I have also experienced seemingly random hangs even more often, probably 5 or 6 times as often as a crash. Saving the project after every little change I make, then closing and restarting Encore allows me to make progress albeit at a significantly reduced workflow rate. Accessing Photoshop from Encore appears to be working flawlessly so far aside from the slow load times. Encore hangs sometimes during video transcoding, repeat the process and it works ok. If I try to import a menu from the library after importing my footage files, Encore hangs trying to import it either at the 50% mark or the 99% mark (it varies even with the same exact menu selected from the library). If I import the menu first and the footage after, then no problems. Also trying to render motion menus after importing footage causes Encore to hang, render before footage import and everything works ok. Interestingly enough, previewing my project in Encore's monitor or preview panels works perfectly even in High quality mode -- in fact it operates quite smoothly in comparison to other apps I have tried. Although those footage files that had missing audio tracks on import obviously played silently, I have yet to experience a hang or crash during a preview or when scrubbing through a timeline in the monitor panel.
The last problem I've seen is with the project cache files. It doesn't always get rid of cache files when stuff is deleted from the project. I was working on one project and surprisingly ran out of disk space. When I tracked it down I found that there were some two dozen copies of a footage file I had repeatedly imported and deleted from the project still sitting in the cache folder. The file was an avi about 2GB so it was taking up some 40 GB of disk space for stuff that was no longer in the project. I tried shutting down Encore and manually deleting all the cache files, and that worked for most of them, but there was one 2GB file that kept reappearing in the cache folder even though it was no longer in the project. The XML file in the cache folder still had references to it in there so I can only assume that was the reason it kept showing up. I eventually had to delete and totally recreate the project from scratch to regain my lost disk space. This included having to sit thru a 6 hour long transcoding session which pissed me off to no end.
Encore CS3 appears on the surface to be a very powerful, feature rich, and approachable app with a simple easy to use interface, but it is awfully bugged in just about every area I have explored and still needs lots and lots of work for it to be really useful. Frankly for me it is pretty damn annoying that I have invested so much money in this suite only to find several of the apps in it (Encore & Premiere in particular) behaving this poorly. In my opinion every single app in the suite exhibits lousy performance whenever you must do anything at all involving the disk from the time you click to start it up until the time you click to close it down. Several of them are just as seriously bugged as Encore too, and being a long time Photoshop v5.5 user I expected much more from Adobe. Even Photoshop is two or three times as slow now (e.g. it takes about 20-30 seconds to simply create an empty 500x500 pixel image file and almost a full minute to load a 30x60 pixel single-layer gif). So far I have attempted to create 6 DVDs using Encore and after 3 weeks of effort have only succeeded in getting one of them onto a final disk -- and that one is kinda limping to work correctly in my DVD player. Three of those projects became so corrupted while working on them that I had to delete them completely and recreate them from scratch, only to find that I still couldn't get them to completion for one reason or another. Seriously disappointing.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Problems importing cs4 premiere timeline into encore and encoder

Hi. I am still a "beginner to premiere" but have never had a problem importing premiere timelines into encoder and encore and then either creating a youtube file or dvd etc. But only recently it seems there is a problem importing the timeline ... it starts the process but then cannot continue ... it comes up with some error bug after about 5 minutes. Never happended before. I downloaded the latest version 4.2.1 but no difference. Should I uninstall/re-install??

>comes up with some error
That is just too vague for anyone to help
Post the TEXT of the error message... and do a forum search to see if there are other messages with the same error

Do I need to re-install the WHOLE suite or can I just install just Encore and Premier Pro?????

I'm having a problem with my Encore and Premier Pro software. I have the Adobe Creative Suite Production Studio Premium CS5.1. Encore will not allow me to burn DVDS. I'm getting an 52102 error...won't allow it to finish writing...ALSO Premier Pro stops after capturing about 5 or 10 minutes of video and freezes...do I need to re-install my software??? and if I do... do I need to install the WHOLE suite or can I just install just Encore and Premier Pro????? I can burn and image file and it burns DVDs on my old Corel software so I know its not the burner or the DVDs I'm using..I am in the middle of a big project for kids at school really need to figure this out...not getting anywhere online. Can anyone help??? Has anyone had this problem? Hope I'm posting this to right place. THANKS!

I haven't had 52102 error, but seen it discussed. Here are a couple of links
Error = Sense Code 52102
Encore Hardware Error Sense Code 52102
Burning the iso file to the dvd may not be the same process as burning directly from Encore to dvd, and so may not exhibit the same error, if any. See response 1 in the first link.
As to the capture problem, look here
Troubleshoot digital video capture and playback | Adobe Premiere Pro

Encore CS5 Menu Problems

Allow me to begin by saying thank you in advance for any and all help. Please know I am a marine biologist first and a video editor second so I'll apologize for my elementary questions.
2011 macbook pro, 8gb ram, all working files (connected assets) are on the hard drive, Panasonic BD burner connected firewire 800, Encore CS5
This is a blu-ray project.
I have created a movie that has only 2 menus. The main menu and a chapter selction menu.
The menus have a video file playing in the background with text generated from the video editor appearing 10 seconds in. This menu is very basic...video background with 3 buttons overlayed on top placed where the text appears. Of these buttons, one plays the main movie, another plays a behind the scenes, and the last directs the user to the chapter selection menu.
The video files for the menu background were transcoded in Media Manager to Blu-ray h.264 and imported assets as .m4v video and .ac3 audio.
The actual movie files are also imported in this same manner and are working fine.
Preview works fine except where indicated below in the form of the background video being in poor quality.
Problem:
When the disc is inserted into a blu-ray player, the main menu background video looks worse than standard def videos. At the loop point set for the buttons to "appear and activate" (10sec) the video freezes, screen turns black for just a split second (literally, split second) then re-appears normally with all buttons working fine, the video plays accordingly but is still in bad quality. The buttons work as supposed to and the movies they're connected to are brilliantly played in blu-ray quality without any problems.
On the chapter selection menu, the same applys to the background video where it plays in poor quality but the problem here is again at the loop point but has a different action. At the time of the loop point (again 10sec) the video stops, then jumps back to the beginning of the Chapter menu and starts over again. It does this over and over, never allowing me to get to the buttons for chapter selection. It just loops back to the beginning of the same menu. The only way to stop this is to press the main menu button on the remote to get back to the main menu.
So...2 things:
1) howcome the background videos in the menus are in bad quality? Do know in the preview, the background videos are in the good quality sometimes. In other words, when I press the preview, sometimes the videos are shown in good quality, and sometimes they're not. I onced "fixed" it when it previewed in poor quality by disconnecting the wip to the asset, then reconnecting it. It played fine in the preview once but then the next time I previewed it, it was in poor quality.
2) why are there 2 different glitches at the loop points on the menus. Both menus are identical in properties, not in asset connections. As a matter of fact, the chapter menu was created by copy/pasting the main menu, changing the assets, and using more buttons (these buttons were also copy/paste from the main menu buttons but have different links). Also know that in preview, the loop points work just fine and the buttons appear without a problem, but the video quality is diminished as with the main menu.
2 Burn processes tried and have identical problems:
I created discs using 2 methods and the problems are identical in both. I burned a blu-ray disc directly from Encore which exhibited these problems. I also made a folder and burned the BDMV file in Toast Titanium Pro 10 and also have these same identcal problems. I did make an .iso file also, but don't know how to test that on a blu-ray disc. I am using BD-RE discs so that I don't waste a lot of money.
Please help. I am in crunch time and have less than 2 weeks to complete this and get 100 discs burned.
Thank you again for reading this and for any and all help.
Charlie

Hi Charlie,
about loop point frezees (black video), no way out, sorry: this is an Encore CS5 bug and we all are waiting for the brand new CS5.5.
Jon Jeddes has tried to find a solution with other sws support but he met lot of difficulties.
About your low definition results, it could depend by many things.
Don't know Media Manager, but, usually, low definitions are related to low bitrates (check yours are at least 25 Mb per second).
Hope this will help.
Ciao
Giorgio

Adobe Encore CS6 loading problem

Every time i leave my app and come right back into working on my project, a few seconds in my cursors gives me the apple loading symbol. Why does this happen? it slows down the process so much. As long as im in the app working theres no problem but the second i leave the program and come back to work it gives me the loading symbol again. Its becoming a annoyance.
I use a mac osx 10.8.4 procesor 2ghz intel core i7 with 8gb of ram
im able to do all my video editing and photo editing fine except with adobe encore (loading cursor problem)

I would first look at Encore Edit -> Preferences -> Memory. May be swapping out memory. 8 Gig RAM is not all that much.

Adobe Encore CS5 quality problems on output

Why do my video files become pixelized and shaky after i burn my dvd? why do i get a degradation of colors?????
my transcode settings are: 7mb 2 pass VBR
Are there any other solutions????

Sir,
What i did i the following:
I exported pal quicktimes from final cut pro, the quality is great when looking at the quicktime uncompressed. when u see the uncompressed scaled quicktime it is very good.
than i imported the quicktimes to Encore, and transcode them in Encore.
the transcoding is our problem, we are working in pal 720x576 25fps.
this is before
this is after
Look at the sharpness of the fonts.
our main problem is the degradation of colors it looks like ripples it's very ugly.
Thank you

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

I am making code to try to make a game and my problem is that my code......

I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
     //Wounding formula
     double sL = 70;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 50;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     rockCrab() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          double done = rint(fH - fA);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
     //Wounding formula
     double sL = 1;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 1;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     self() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
     public static void main(String[] args) {
          self instance1 = new self();
          rockCrab instance2 = new rockCrab();
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM

[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.

Remote and IR Problem

A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
MacBook Pro 1.83 GHz Mac OS X (10.4.9)

check out this thread. Seems to be the same problem.
http://discussions.apple.com/thread.jspa?messageID=4701905&#4701905

LG Ally text message and gps problems

hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

Encore and imgdvd problem

Similar Messages

Maybe you are looking for