Encore transcoding data for ages........

Hello,
I am trying to make a Blu-ray authoring and the trancoding proccess takes for ever. The indication bar is not progreeing from one point any further. I have the computer working over one and a half days now. It is a project of the following data:
Mpeg-2 blu-ray
29 GB  (134 minutes film)
Full HD (1920x1080)
PAL
My computer has Windows 7 64-bit, 12GB of RAM, Quadro FX 4800 graphic card.
Does anybody know why the trancoding proccess takes for ever? The program doesn't crash though. Byt the progress bar is not moving further than a point.
Thanks
Giannis.

I just can say that it doesn't happen on my pc.
An hour and half movie takes less than 8 hours to be transcoded in H264 mode, less if you set mpeg2 HD.
And I have just 8 MG RAM.
If this happens, probably:
-RAM is used for other applications,
-or input datas have something that PPro "doesn't like"
-or some "complicated effects" are used (like antishaking and\or resizing ones).
-What output settings have you used?
-29 Gb is the expected value displayed in AE windows? (AE lies!!)
-Usually I never reach 24 Gb for a complete 2 hour BD with menus and other stuffs.
-Which kind of video and audio files have you put in timeline?
Ciao
Giorgio

Similar Messages

  • Vendor ageing report data for all doc type needed(urgent)

    hello everyone
    once again i need ur help guys.
    in the vendor ageing report i am getting data for only one document type and not of other.
    ex- see i have two documents type-
    1.KD 2. EJ
    so i am getting data for document type KD only.
    so how to get the data of document type EJ along with KD.
    below is my code .
    so tell what modifications i have to made .
    *& Report  Z_VENDOR AGEING                                                    *
    *&  in this repoet I am calculating the vendor ageing
        which is depending on formula
        AGEING = Current Date(or any date entered by user) – Bline Date(BSIK-ZFBDT)                                                                 *
    REPORT  z_vendor  NO STANDARD PAGE HEADING
                      LINE-SIZE 200
                      LINE-COUNT 65(3).
    TABLES : bsik.
    DATA : BEGIN OF t_out OCCURS 0,
           bukrs LIKE bsik-bukrs,
           saknr LIKE bsik-saknr,
           bldat LIKE bsik-bldat,
           wrbtr LIKE bsik-wrbtr,
           lifnr LIKE bsik-lifnr,
           zfbdt like bsik-zfbdt,
           zbd1t like bsik-zbd1t,
           ageing type i,
           END OF t_out.
    parameters : p_date1 type d.
    SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
                     s_saknr FOR bsik-saknr,
                     s_lifnr FOR bsik-lifnr.
    SELECT bukrs saknr bldat wrbtr lifnr zfbdt zbd1t
           FROM bsik
           INTO  TABLE t_out
           WHERE saknr IN s_saknr
           AND bukrs IN s_bukrs
           AND lifnr IN s_lifnr.
    Loop at t_out.
    CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
      EXPORTING
        i_datum_bis                   = p_date1
        i_datum_von                   = t_out-zfbdt
      I_KZ_EXCL_VON                 = '0'
      I_KZ_INCL_BIS                 = '0'
      I_KZ_ULT_BIS                  = ' '
      I_KZ_ULT_VON                  = ' '
      I_STGMETH                     = '0'
      I_SZBMETH                     = '1'
    IMPORTING
       E_TAGE                        = t_out-ageing
    EXCEPTIONS
      DAYS_METHOD_NOT_DEFINED       = 1
      OTHERS                        = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Modify t_out.
    Clear t_out.
    Endloop.
    LOOP AT T_OUT.
    IF T_OUT-SHKZG = ‘H’.
    T_OUT-WRBTR = T_OUT-WRBTR * -1.
    T_OUT-WRBTR = T_OUT-DMBTR * -1.
    ENDIF.
    DATA: TOTAL(16) TYPE P DECIMALS 2.
    TOTAL = TOTAL + T_OUT-DMBTR.
    Endloop.
    LOOP AT t_out.
      WRITE : / t_out-saknr,
                t_out-lifnr,
                t_out-wrbtr,
                t_out-zfbdt,
                T_OUT-DMBTR,
                t_out-ageing.
    AT LAST.
    WRITE:/ TOTAL.
    CLEAR TOTAL.
    ENDAT.
    ENDLOOP.
    Message was edited by: sanjeev singh

    Sanjeev,
    Can you tell what is document type EJ representing...Secondly, if you check couple of documents of EJ type and check if data is available as per you WHERE clause filters.
    Regards
    Anurag

  • AP Aging report - key date for user entry

    Hi All,
    We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
    I know the key date for this report is created on net due date in SAP standard report.
    In standard SAP report , key date is always a system date(SY-DATUM).
    What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
    If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
    Can  someone Pls tell me if aging buckets are calculated based on a user entry ?
    Regards,
    Kumar

    Hi Voodi,
    Aging in the standard report is being calculated like below...
    1.For open items
    Posting date<key date
    Item status = O
    2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
    in this scenarion , key date is always system date ie today's date.
    But user wants to get all the invoices based on his user entry...
    is this possible with the same standard key date variable or do we need implement any other logic???
    Regards,
    Kumar

  • HT4623 My email program has gone blank. When launched I just get a white frame with nothing in it. It's been fine for ages but now it's got a bug or something.Any ideas? I am up to date with software.Thanks david

    My email program has gone blank. When launched I just get a white frame with nothing in it. It's been fine for ages but now it's got a bug or something.Any ideas? I am up to date with software.Thanks david

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Make sure your network settings are correct and your network connection is active, or try again later; Have been trying to fix for ages.

    Hi Everyone, been struggling all day to restore my settings on my ipod, as my little brother has put a restriction password in place and made me not able to get into Safari, iTunes, Camera which I really need. I have tried everything, resetting my proxy settings, turning off the firewall, changing my network location, ran diagnostics. Everything seems fine on that, I post below my results. I also tried restoring from the device, but with the restrictions code in place I can not do so. And everytime I am dowloading the software update before the restore it comes up with 'Make sure your network settings are correct and your network connection is active, or try again later'. I have been using google for ages and am not sure what I have missed.
    I am using Windows 7 with an Acer Notebook.
    DIAGNOSTICS:
    Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
    Acer Aspire One 753
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00BCBEE0093E4EF0
    Current user is not an administrator.
    The current local date and time is 2013-04-05 19:32:36.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {E1CB97AA-CDFF-4C43-8F63-658D7E70A39F}
    Description:     Intel(R) Centrino(R) Advanced-N 6205
    IP Address:     172.16.42.14
    Subnet Mask:     255.255.255.0
    Default Gateway:     172.16.42.1
    DHCP Enabled:     Yes
    DHCP Server:     172.16.42.1
    Lease Obtained:     Fri Apr 05 19:01:59 2013
    Lease Expires:     Fri Apr 05 20:01:59 2013
    DNS Servers:     172.16.42.1
    Adapter Name:     {44D6CC7B-1F1E-4F26-BBB8-18F98A868E2B}
    Description:     Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:     0.0.0.0
    Subnet Mask:     0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:     Yes
    DHCP Server:
    Lease Obtained:     Thu Jan 01 11:00:00 1970
    Lease Expires:     Thu Jan 01 11:00:00 1970
    DNS Servers:
    Active Connection:     LAN Connection
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-02-14 17:34:33.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Daniel Pugh's Ipod, iPod touch (4th generation) running firmware version 6.1.3
    Serial Number:     C3XDN3C5DCP7
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 5.0.1
    Serial Number:     C38GKQWZDT9Y
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Kindest Regards
    Daniel (Puggy858)

    Hi Diesel vdub,
    Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

  • Variables usage for ageing analysis ...

    Dear All,
        Pls let me know how do we create a variable in the query so that an ageing analysis can be done.
          e.g, I have ranges in the selection criteria (1-30, 31-60, 61-120, >120),  I need to filter the data based on my posting date and  the report run date.
         Depending on the conditions the values should be populated in the respective variables viz ., 1-30, 31-60 etc.
    TIA
    Mohd. Abdul Moghani

    Hi,
      Check the below link where I have provided a solution for aging....
    Re: Aging Report
    Hope this helps you....

  • Breakout of data for Webi Report

    I am not sure if this question should go here or in the Universe forum but I will post it here first.  I am using BOBJ Edge XI3.1 with SQL Server 2005 holding my data.
    I have a universe that has 4 tables in it.  The first table is "CSS_Facts" which is a Fact table consisting of aggregate data.  Table two is "TJG_Organization_CSS"  that holds six levels of hierarchy for all clients.  Corporation, System, Facility, Division, Service Line and Department.  Department is the lowest level so there is an "Organization_Key" for every department for every client.  Table three is "TJG_Survey_CSS" which holds all of the survey data for every client.  Every answer for every survey has its own "Survey_Key".  Lastly I have "TJG_Time" which has a "Time_Key" for every day of the year.
    Table "CSS_Facts" has a foreign key for each of the three tables above with the same field name as the key field in each of those tables.  The cardinality for all three of these joins is many to 1 from the "CSS_Facts" table (ex:  many "Survey_Keys" from the Facts table to one key in "TJG_Survey_CSS").  The facts table also has 4 other fields which hold the counts and or computed fields.
    All of this works perfectly for most of what we do.  I can build a WEBI document that has all of the fields that I need.  As an example, I can get a report of all the statements for a given timeframe for a specific survey number for a specific client.  If the survey has 50 statements in it I can get back all of the statements with the counts for all of the possible answers for each statement.  This is expected and what we want.
    Our problem is being able to break this down based upon the answer(s) to one question in the survey.  Let's say statement number 2 in the survey is an age statement that has 5 possible answers.  Answer 1 might be "Less than 18.".  Answer 2 might be "19 to 29.", and so on.  When I filter my query in my Webi to just bring back results for anyone who chose Answer 1 (Less than 18) for this statement I get back pretty much what I expect, that question only with all of the possible answers but a computed total for just answer 1 (less than 18) with all of the other answers getting zeroes.  Again, this is what I expect to get back based on the WHERE clause that is generated but not really what we want.  We want to get back the complete survey in the report, all 50 statements with new count totals per statement based on the answer (Less than 18) from that 1 question.
    Is this possible to do within Webi reports?  If not, can this be done outside of a webi report, but then brought back into the Universe to be consumbed by a Webi report?
    Thanks for any help in advance.

    You can use the following work-around without the need for an SDK solution.
    Display this info in the report in stead of in the pop-up...
    Just create a cell with the info want to show and hide it if there is data,
    (use and alerter to empty it when you have data and hide on empty)
    show it when there is no data fetched.
    Hope this helps,
    Marianne

  • MY POSSIBLE FIX for Time Machine preparing for ages every hour

    Like many others, i have had problems with Time Machines backups - ever since upgrading to 10.5.2. Every hour it would say 'preparing' for ages, and then, when it did finally backup, the data transfer was incredibly slow. Not to mention the amount of cpu usage it was using during the preparing status!
    I have no idea if this is a FIX, or if i was just lucky, but Time Machine now works as it should, i.e. it backs-up seamlessly.
    Anyway, this is what i did: booted from my Tiger disc (yes, even though i have Leopard) and went into its 'disc utility', from there i selected 'repair permissions'. Once the Tiger disc had completed repairing the permissions, i quit out of it and restarted my MacBook normally, i.e. not from the Tiger disc. When it had finished restarting, i went to disc utility and selected 'repair permissions'.
    Ever since, TM has been just perfect. Coincidence? - i honestly do not know.
    By the way, i don't know if repairing the permissions from within Leopard did anything or not, but this is the sequence i used. Plus also, it might be good to note that i had repaired permissions many a time, but with no success in fixing TM, but once doing it from the Tiger disc it fixed TM.
    I hope it helps someone, because i know just how annoying it was when TM was not working correctly!

    I upgraded from Tiger to Leopard, which is why i believe i have had trouble.
    What is 'A&I or E&I'?

  • Encore transcoding

    My question is, I shoot 1080 but I edit in 720 meaning I just crop on a 1080 timeline then set the crop to 720 in export settings and change output size to match the new source. I want to use Dynamic Link but that is the problem, when I bring the footage in I can't figure out how to crop it to 720 for output. I'm trying to get it to Blu-Ray, 24fps, 720 which I've been plenty of other times by exporting a AVI(uncompressed) in premiere then bring it into Encore, transcoding again blah blah blah... huge time waster. Does anyone have any ideas if what I'm trying to do is possible through the Dynamic Link option. Thanks heaps!

    Yes of course its a huge time waster encoding twice.
    Just export direct to dvd or bd in Premiere and import that into Encore.
    Have to wait until i get home to see how you can set Encore to 720p with DL.

  • Updation of Goods Receipt Date for legacy data

    Dear Experts,
    We went GOLIVE of SAP 6.0 version on 31.01.2008. At that time we have uploaded Inventory of Stores & Spares material wise with the GR Date as 31.01.08 as we could not get the actual date of receipt of thos materials.
    Now we could able to find out the actual date of Goods Receipt of some of items and want to update it so that SAP standard report for Age Wise Analysis can be correctly generated from SAP.
    Can any body advise, is it possible, if yes thru LSMW and which T-code and which field.
    Regards,
    Alok

    Hi
    This is not possible. You need to keep the previous data outside SAP. You can put stock in current period or previous period. Not in all the months of last year.
    Regards
    Antony

  • Sample query for Aging Report

    Hi! Anybody who has a sample sql query for aging report? basically this is the table structure and sample data
    bill_no B1-01 B1-02 B1-03
    bill_date 01-JAN 01-FEB 01-MAR
    previous_balance 100 600 800
    current_charges 500 200 400
    total_due 600 800 1200
    As of march 1, total due is 1200. how can i get the breakdown of 1200 as to the number of days it has been due. ex. 500 (60 days old 01-JAN to 01-MAR), 200 (30 days old), 400 (current)
    please help. thanks!
    null

    SELECT CEIL((SELECT MAX(Bill_Date) FROM Bill)- Bill_Date) Days , Previous_Balance, Current_Charges FROM Bill ORDER BY Days ASC
    Then create a matrix reprot.

  • My iPhone4 vibrated for ages with a blank screen, now it won't turn on.

    My iPhone4 vibrated for ages with a blank screen, now it won't turn on. It was fully charged as well.

    Plug it in to wall power.  If it doesn't automatically come on within 15 minutes, try a Reset... press the home and sleep/lock buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.  You might need to hold the buttons for as long as a minute.
    If it still doesn't turn on, you likely have a hardware problem.

  • Effect on SD Credit Limit when extension of Due Date for Certain Invoices

    Dear SD Members,
    Brief Description
    Extension of Due Date for Certain Invoices
    Due Date extension to be made for certain invoices posted in FI
    Requirement
    After Billing is done and invoice is posted in FI management may decide to postpone due date for certain for any particular invoice for a specific customer.
    The payment term will be changed in the invoice and due date should change. But for this no SD credit limit should be affected. The change can only be made by specific user with authorization. The bank also will be intimated with details from SAP.
    What I want to know will there be any effect on SD Credit Management part, when from FI side invoices payment terms due date will be extended. Please share your view & suggestions on this.
    Regards
    Subrat

    There will be no affect on the credit mgmt..... the credit screen captures the total open AR... it does not consider Aging in AR.... all the values even if not due r calucalted in the open AR purpose for Credit....

  • I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

    I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".  I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service.  Is there something I should do to my IPAD?  I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions).  I don't know what to do next. My IOS version is 6.1.3.  I did go into Network from the general tab and I see it says "SIM not provisioned".    HELP and Thank you in advance.

    Hello Theresa818,
    Thank you for using Apple Support Communities!
    It sounds like the cellular data will not activate for some reason on the iPad.
    I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
    Check for a carrier settings update.
    Update your iPad.
    Toggle the Cellular Data setting off and on under Settings > Cellular Data.
    Restart your iPad.
    Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
    If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
    Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPad as new.
    If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
    I know you may have done one or two of the steps here, so you can skip those.
    Take care,
    Sterling

  • "use cellular data for" apps keep turning back on

    ie. go in, slide bar from green to off for facetime, youtube, etc...go out of Cellular, back in, and those apps show green for "use cellular data for". 
    At first I thought it was an issue with some versions of Angry Birds, as they don't all do this.  Then realized facetime, youtube, facebook, etc.. all do this.
    Works fine on two other iphones.   Running latest ios on 4S
    The fact it doesn't do it for all apps is what I find is strange.  Thought at first it was an issue with Rovio apps, but then realized even facetime does this.
    Thanks

    I'd like to know why there is not solution to this.  I think I'll just remove all those apps that are turning their 'use cellular' data back on.  I only cared because when my kid plays angry birds, my cellular data was being used for videos.  Oh well, I guess I'll have to remove apps or get a new data plan.
    <Edited by Host>

Maybe you are looking for