Endeca 3.0 - Getting Started Data
I am new Endeca user and have just finishing downlloading the Endeca Information Discovery 3.0.
I was going through the Getting started videos on Youtube and realized I do not have the getting started as a community Application. Can anyone please let me know how I can obtain that data so that I can learn with the tutorial??
Thanks & Regards,
Naman
You download the materials for the sample application from the same eDelivery page where you downloaded the installation files for Studio.
In the list of downloads for Studio, there is an item labeled Oracle Endeca Information Discovery Sample Application (3.0). This is a .zip file containing the Integrator pipeline (for ingesting the sample application data) and Studio .lar file (for importing the sample application pages).
See Downloading the Getting Started package in the 3.0 Getting Started Guide.
Similar Messages
-
Function to get starting date of financial year ??
Hi,
what is the Function to get starting date of financial year. I am developing a inventory report, for that i need; start of the factory opening date. Is that factory n financial year are in the same date.
Thanks,
SenthilSEE THIS FMS.
TSTR_PERIODS_FACTORYCALENDAR
FACTORY_CALENDAR_GET
RH_READ_CALENDAR -
Framework Settings for map in Endeca studio for getting started application
Hi All,
Can anybody tell me,what is the default framework setting for below fields when we installed endeca studio to make getting started application work especially map settings,
df.mapviewer:???
df.mapTileLayer: ???
df.mapViewer: ???
Due to change in configuration i cannot see the map in getting started application please help to solve the above problem.
I m getting below error
MapView service is not available, please contact your system administrator.Hello.
df.mapTileLayer: "elocation_mercator.world_map"
df.mapViewer: "http://elocation.oracle.com/mapviewer/"
and i think you was asking also for:
df.mapLocation: "elocation.oracle.com"
Let me know if this helped you
EBrauerP -
How to get start date of fiscal year?
hi all,
how to get the start date of fiscal year by passing fiscal year variant and fiscal year?
please let me know.hi,
See this FM
FIRST_AND_LAST_DAY_IN_YEAR_GET " Provides the first and last calendar date for a fiscal year
Regards -
How to get starting date and ending date of the given Fiscal Period
Hi Friends,
In my Selection screen parameter, I've Fiscal year and Period , I want to get the starting date and ending date with the Fiscal period.
How to get and throught which FM.
Pls advise.
thanks®ards
Sankar.Hello Sankar,
Check the FM PERIOD_DAY_DETERMINE.
DATA :
l_periv TYPE periv,
l_blart TYPE blart,
l_fday TYPE bkpf-budat, "First day in period
l_lday TYPE bkpf-budat. "Last day in period
* Fetch the fiscal year variant from T001
SELECT SINGLE periv INTO TABLE l_periv
FROM t001
WHERE bukrs EQ p_bukrs.
* Get first day/last day
CALL FUNCTION 'PERIOD_DAY_DETERMINE'
EXPORTING
i_gjahr = p_gjahr
i_monat = p_monat
i_periv = l_periv
IMPORTING
e_fday = l_fday
e_lday = l_lday
EXCEPTIONS
error_period = 1
error_period_version = 2
firstday_not_defined = 3
period_not_defined = 4
year_invalid = 5
OTHERS = 6.
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Jan 9, 2009 2:08 PM -
How to get start date of the period for a given date from cube
I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the start day
of the period. how can i write expression for that in my report?
ramHi ramprasad74,
According to your description, you are using Analysis Services as a data source for the report, the cube has hierarchy: Fyear, FQuarter, FPeriod, fweek, Fdate. You want to add a date parameter to the report, after you changed value of the parameter, the
report will return the first day of FPeriod.
To achieve your goal, we need to add a parameter to the report, then use the parameter in mdx query. For detail information, please refer to the following steps:
In the Report Data pane, right-click on a dataset created from a SQL Server Analysis Services data source type, and then click Query. The MDX query designer opens in Design mode.
On the toolbar, click Design to toggle to Query mode.
On the MDX query designer toolbar, click Query Parameters symbol. The Query Parameters dialog box opens.
In the Parameter column, click <Enter Parameter>, and then type the name of a parameter.
In the Dimension column, choose a value from the drop-down list.
In the Hierarchy column, choose a value from the drop-down list.
In the Default column, from the drop-down list, select a single value.
Click OK.
In query designer dialog box, type the mdx query like below:
with member [Measures].[FirstChild]
as
[Date].[Fiscal].currentmember.parent.firstchild.name
select {[Measures].[FirstChild]} on 0,
[Date].[Fiscal].[Date].members on 1
from
( SELECT ( STRTOSET(@ParameterName, CONSTRAINED) ) on 0
from
[Cube]
Here are relevant threads you can reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/c7146ac3-40ea-4d53-b321-c707aebbd405/how-to-pass-date-parameter-to-mdx-query
https://social.msdn.microsoft.com/forums/sqlserver/en-US/fd12a865-bc90-4a65-af42-ce38a8cfa29b/pass-date-time-parameter-to-mdx-query-ssrs
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here. -
How to get the date starting from 1 to the current date from the system dat
Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
call function 'HR_JP_MONTH_BEGIN_END_DATE'
exporting
iv_date = sy-datum
importing
ev_month_begin_date = gv_begda
ev_month_end_date = gv_endda.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana -
Getting Start and End Date of Current Year?
Hi Folks,
How do I get the start of the year and end of the year in Java ?
If I say :
Calendar cal = Calendar.getInstance();
int day = cal.get(Calendar.DATE);
int month = cal.get(Calendar.MONTH);
int year = cal.get(Calendar.YEAR);
System.out.println("Day: " + day);
System.out.println("Month: " + month);
System.out.println("Year: " + year);
I get the current day and time.What I need is the start of the current Year (Jan 2010) and the End of the Current Year (Dec 2010).
How can get the above 2 dates if I the current date is March 24th 2010 ?
Thankssabre150 wrote:
What am I missing? The start date of 2010 is 1/1/2010 and the end data is 31/12/2010 . So, as I see it, at any time the only information you need is the current year which you currently get from int year = cal.get(Calendar.YEAR);
Well, with the GregorianCalendar, anyway. ;-) -
How can I get the start date and end date of a certain week?
Hello, in my java code, I can get the week ID , using
org.joda.time.base.AbstractDateTime.getWeekOfWeekyear() , for example, this week is the 16th week of this year. And I want to get the start date(date of Monday) and end date(date of Sunday) of the week. Is there any method can supply such date value??thanks1 public Date getCurrentMonday(){
2 Date monday = null;
3 Calendar rightNow = Calendar.getInstance();
4 int day = rightNow.get(Calendar.DAY_OF_WEEK);
5 int distance = 0;
6
7
8 if (day == Calendar.MONDAY)
9 monday = rightNow.getTime();
10 else
11 {
12 distance = day - Calendar.MONDAY;
13 if (distance == -1)
14 distance = 6;
15
16 monday = (Date) (rightNow.getTime());
17 monday.setTime(monday.getTime() - 1000 *60 *60 *24 *(distance));
18 }
19 return monday;
20 } -
I have purchased a newer mid 2011 iMac for my wife to replace her dead 17"iMac from 2006. It was running Snow Leopard. The new iMac has Yosemite and when I go into Migration Assistant it tells me that the OS X is too old, implying that I cannot get the data from it. How can I migrate this data to the new iMac? I have the hard drive removed and in an external enclosure connected to the new iMac.
Thanks,
Bill StratmanSince any OS since Lion does not support Rosetta or PPC applications, you may want to check her apps for compatibility.
Have you tried to follow all the instructions here:
OS X Yosemite: Transfer your info from a computer or storage device
Also, as a general note: when you got the 2011 iMac did it have the original OS installed as required by the SLA? The seller is to remove any OS version obtained at the app store since the license is not transferable - did he do that? If not, as the OS download is tied to the Apple ID used to obtain it, you will not be able to update apps or reinstall the OS, so may I suggest you do this step now before you start porting over all the files. Use Internet Recovery: Hold Command + Option + R while restarting/rebooting until you see a spinning globe and a progress bar. After 2 - 10 minutes, you'll be connected to Apple's servers and see a Utilities window. Go to Disk Utility and choose erase your drive; once finished, go back to the window and choose to reinstall OS X. This should install a fresh original OS version which you can then update and tie to your wife's Apple ID. -
Camel Query : Calender list : Get Items agains given date that must be greater than and eqaul to start date and greater less than or equal to end date ?
A Snap of Employee holiday list
Case : Anne juul Sondergaar is on leave from 05-06-2014 to 07-06-2014
I need a query to check wheither Anne juul is on leave at 06-06-2014 ????
I am using this query that return nothing
SPQueryquery =
newSPQuery();
query.Query =
@"<Where>
<And>
<And>
<Leq>
<FieldRef Name='Til' />
<Value Type='DateTime'>"
+ WorkingStartDate.ToString("yyyy-MM-dd")
+ @"</Value>
</Leq>
<Geq>
<FieldRef Name='Fra' />
<Value Type='DateTime'>"
+ WorkingStartDate.ToString("yyyy-MM-dd")
+ @"</Value>
</Geq>
</And>
<Eq>
<FieldRef Name='Medarbejdere' />
<Value Type='Lookup'>"
+ EmployeeName.Trim() +
@"</Value>
</Eq>
</And>
</Where>"
query.ViewFields =
" <FieldRef Name='ID' />";
Ahsan RanjhaHello,
Download CAML query builder from below location and use it to build your query:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f7b36ebc-6142-404a-8b04-9c87de272871/where-can-i-download-the-u2u-caml-query-builder-for-sharepoint-2010may-i-know-the-exact-link?forum=sharepointgeneralprevious
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
"Getting Started" page for Firefox 16.0.1 has a video window that plays audio only. Firefox test page for plugins shows RealPlayer, Flash, Flip4Mac and Java are up to date. What other video plugins are required. I'm currently using Firefox 10.0.2 and I'm not inclined to update unless I have good reasons to do so.
When the page opens I get a message that plugins are missing. Clicking on Install Missing Plugins comes up with Unknown Plugin (video/mp4); Manual Install takes me to the DivX Install page - DivX is up to date.
Once I start the video, Copy Video Location is not an option with Control-click. I can access Page Source, which seems to suggest that Flash is not installed although the Plug In check page says it is.
Is this extract from Page Source helpful?: div class="video-player-no-flash" This video requires a browser with support for open video or Flash.
There doesn't seem to be an option here to be able to attach the whole Page Source as a text file.
Cheers. -
Org.Assignment Infotype start date and End date is getting wrong.
Hi, When i create a new employee in PA40, in Org. Assignment infotype start date and end date is getting wrong. for eg. When i create an employee on 01.04.2014. In org. assignment infotype its getting like this. 01.01.2014 to 31.03.9999 and 01.04.9999 to 31.12.9999 Two date entries are creating by default.
Hi
Check in the Table - T588Z : Dynamic Actions ,is there any custom routines causing the defaulting dates functionality.
Thanks,
Sreeram -
User disabled until start date not getting ROs provisioned via AP
Here's the situation: I have a user in OIM that is disabled until start date. When the start date rolls around, and the job "Enable User After Start Date" runs followed by "Evaulate User Policies," the user is correctly enabled and the correct role gets assigned but the access policy associated with that role does not appear to get triggered so the APs resources are not assigned. However, if a user is entered the same way (via HR recon) but is on or after its start date, then the role gets assigned, the access policy fires, and the ROs are provisioned just fine.
I have noticed that if a user is moved from disabled to enabled, then the membership rules fire and any roles associated with the rules get assigned but in the DB the field USR_POLICY_UPDATE remains null. If I update that field with a '1' and re-run "Evaluate User Policies," the resources are provisioned correctly.
I am wondering if anyone has seen this before or has a suggestion as to how to resolve this.
Thanks,
StephenThanks for the suggestion. As it turned out, I did not have Retrofit checked but unfortunately that did not resolve the issue. The behavior remained the same after checking and re-running 'Evaluate User Policies'.
I may have a workaround for this issue that I am in the process of implementing. I'm creating a job that will run right before 'Enable User After Start Date' that will update the USR_POLICY_UPDATE field to'1' if the status of a user is 'Disabled Until Start Date.' Then the user will get enabled, assigned the appropriate roles via rules, and 'Evaluate User Policies' should run and now find this user and apply the access policies.
Anyway, seems like there should be a simpler answer so I'll keep checking here if anyone has one. I'll also update if the above workaround works.
Thanks,
Stephen -
Production order start date gets incremented by 1 day
Hi,
I have a scenario where in when the Planned Order gets converted to Production Order the Start date gets incremented by 1 day.
If the planned order date is 11.02.2009 after converting to Prod Order it shows the start date as 12.02.2009.
Can any please help me in resolving this issue,
with rgds
Ranjith SinghDear,,
Please run the MRP MD02 with Scheduling- 2 Lead time scheduling.
Planeed order date may be from in house production time which is lot size independent.
But production order date is from routing time which are lot size depnendent.
Hope clear to you or come back if any problem.
Regards,
R.Brahmankar
Maybe you are looking for
-
Ipod nano isn't recognized by itunes
Has anyone else had trouble after the newest Windows 8 update and Itunes downloading/syncing/recognizing ipods? My computer won't even pick up my new Gen 6 Ipod Nano
-
Does TM automatically back up external drives or only internal?
I have two external drives....one that I am backing up to (500GB) and one that will hold all my iphoto/tunes files (1TB). Will TM automatically back up the photos/music drive directly to my TM drive? Also, the above drive I just bought is an iomega 1
-
How display result set of a PL/ SQL function call in a dialog box
Hello, I am calling a PL/ SQL function from Apex, which returns - List of varchar. In Apex, it should show this list of varchar and "Yes" and "No" buttons on a message window. Can you please suggest a way to achieve the same. Thanks, Girish
-
Really small fonts with openbox
Hi All, I am just trying out openbox as a window manager for my media box which currently is running gnome3 ... trying to slim down. I find that the font sizes are incredibly small .. so small that in gnome-terminal i can't see anything and can barel
-
In Snow Leopard, you could see the size of the file which was shown at the bottom of the file. This does not appear to be the case with OS Lion. Am I wrong? Thank you for your help.