Enhance 2LIS_03_UM to include Material Ledger and Group Currency

Hi all,
  I have searching for a solution for this issue for almost a week now both in SDN and Service Marketplace but seems that there is very less informaton about it.
Background:
   We are in the process of implementing the standard content for Inventory in BI and have followed all the steps necessary to initialize and load data.  Out data matches perfectly with reports such as MC.1 and MB5L however in the Revaluation datasource there is no provision to pickup other currency type for material price maintained in material ledger.
I have been trying to find some User Exit/BADI either in the V1/V2 posting or during V3 collection run to pick the delta in standard price and Moving Average Price (MAP) for these difference currency types but without any success.
We have total three valuations maintained in the ML (Material Ledger)
10 - Local Currency (this is the only one provided in the standard content extractor)
30 - Group Currency With Group Valuation
31 - Group Currency with Legal valuation
Even if I change the Group currency in MR21 the change is picked up by 2LIS_03_BF and with the field BWGEO blank. This is not surprising since this field is for Local currency only.
I am sure that someone must have faced this issue before where material ledger is active, any help is appreciated.
Thanks
Raj

Hi,
Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
are you getting same values when compare to R/3 and BW data for some document numbers?

Similar Messages

  • Variance between Material Ledger and General Ledger of

    There is again a variance between Material Ledger and General Ledger of
    7.026,64 (Tcode MB5L) as it was already in $$100036500(G/L).
    The strange thing is, that there is only a difference in the GL Account
    Balance report (FS10N) for S240077000(G/L ). In the Line Item report (FBL3N)
    all documents are available. This issue impacts at least the Balance
    carry forward negativ at the year end, because the system will forward
    the the amount of the balance for S240077000, which is now 7.026,64 to
    less.
    Ther first investigations results:
    - all Material- and FI documents are available.
    - the variances in June refer to FI-documnets 4900015286 and 4900015293.
    - the documents, e.g. 4900015292 and 4900015287, are correct and was
    posted at the same day by the same user and with the same transaction
    MI07.
    - there are no differences for the posted materials identificable from
    the other materials

    Material Ledger/Actual costing  MLAC
    MLAC is used where the FG cost varies every month due to external procurement variation.
    Ex: Jan 2011
    FG cost of manufcature internally = 100
    FG cost of procurement externally = 120 ( Company procures due to capacity constraint)
    FG Standard price at the end of month = 110...This is standard price of FG
    Due to heavy fluctuations in the month of February 2011 in procurement...
    Ex: Feb 2011
    FG cost of manufcature internally = 140
    FG cost of procurement externally = 460 ( Company procures due to capacity constraint)
    FG Standard price at the end of month = 300...This is standard price of FG.
    The variance is very high in Feb 2011 and company want to absorb this variance in Feb 2011 iteslef hence they will use MLAC.
    So if the variance is within reasonable limits company usually do not follow MLAC.
    Where as if the variance is very high company usually follow MLAC.
    In Pharma Industry usually the variance is very high on month to month basis hence they follow MLAC.
    Where as in Industrial Mahcineery Manufacturing Company the variance is with in reasonable limits hence they do not follow MLAC. Ofcourse they can use MLAC as well.
    Srinivas

  • MATERIAL LEDGER  AND PRICE CONTROL V

    Hi Gurus.
    In a Plant I've activated material ledger and some materials have price control V. how does price control V works with material ledger? the average price is uptated at the end of the month or is updated with every receipt?
    Kind Regards.

    Hi Andres,
    What is the price determination indicator in material master? is it 3 or 2?
    Materail ledger during the Actaul Costing Run consider only the price determination indicator 3 material masters.
    Generally all BOM component material masters, we should maintain price determination indicator 3 and price control S.
    All other materials you can have price determination indicator 2 and price control V.
    Regards,
    ADI

  • Hard currency is not valuated in FAGL_FC_VAL along with local and group currency

    Hi All,
    I have the below system settings for FOREX revaluation. The revaluation is not happening for Hard currency along with local and group currency. The test data and other settings seams to be fine as the below mentioned workaround works perfectly for hard currency revaluation.
    I would like to take your expert feedback on this issue to confirm whether this is how SAP works or its an issue with FAGL_FC_VAL program.
    System Settings:
    Currencies in company code
    local currency      group currency      hard currency
    10                             30                         40
    USD                          USD                    UYU
    FOREX settings:
    Work around found:
    Define two Valuation area, say
    1. Valuation Area: A1 which will have currency type 10 and 30.
    2. Valuation Area: A2 which will have only the currency type 40.
    3. Run FAGL_FC_VAL twice for these area.
    Issue with this work around:
    1. The valuation area is assigned to one accounting principle (which is in turn assigned to a specific ledger).
    2. Thus, if I have different accounting FOREX process to be followed in different ledgers (say IFRS ledger, Local Ledger, Tax ledger) then I need to create 2 valuation area (as per above workaround) for each ledgers and run FAGL_FC_VAL for each of these valuation areas.
    Thanks & Regards
    Nikhil Kothari

    Hi Experts,
    Any views on the above issue?
    Thanks & Regards
    Nikhil Kothari

  • Table for finding material cost in group currency

    Hi ,
    We are maintaing product cost on Cocode currency and group currency using CK11. We are not able to find the cost in group currecy in MEBW or KEPH.
    Kindly let me know the right table to look into.
    Thanks,
    Jatin

    Hi Jatin
    Did you mean you have cost component split in controlling area currency? if yes, then you will get for each costing calculation two records in table KEPH, the currency label is field LOSFX. The record with blank LOSFX is company code currency, the one with "X" is controlling area currency.
    Hope this helps.
    Junqi

  • Realized exchange rate difference in local and group currency

    Hi Friends,
    For a company code with local currency as Euro and group currency as USD, the setting in TR code OB22 for group currency is: Translation taking first local currency as a basis. When the open items are cleared, SAP posts difference in local currency and group currency. Sometimes, document currency is also group currency i.e. USD. The realized exchange difference is posted in Euro but it is not converted from Euro to group currency. Instead, system just calculates difference in group currency by comparing the value in group currency at the time of original transaction and when the transaction is cleared. Does anyone have dealt with such requirement and is there a way to be able to translate realized exchange differences from local to group currency?
    Thanks and regards,
    Pinky

    >Sometimes, document currency is also group currency i.e. USD.
    Can you explain, it's because of your settings or because of SAP?

  • Unable to clear GL due to Val difference between Local and group currency.

    hi,
    We have an open item managed Revaluation G/L account in our company code which has a local currency USD.There are some documents posted to this account in both USD and CAD. But when we analyze the docs posted in CAD we found a valuation difference in the local currency(USD) and the Group currency(again USD). I am not sure of the reason for this. But due to this difference we are unable to clear this account. Please let me know if anyone can think of how to clear this particular GL account.
    Rgds,
    Raj/
    Edited by: raj3875 on Oct 8, 2009 11:37 PM

    We have an issue even with document currency in USD. there is a valuation difference between Local currency (USD) and Group currency (USD).
    For example:
    Doc currency = 0 USD
    Local Currrency = 171,000 USD
    Group currency  = 0 USD
    Because of this I am not able to clear the account. Not sure why there is a difference inspite of the same currency. I try to clear it in F-04 but I get the below error:
    Posting is only possible with a zero balance; correct document
    Message no. F5060
    Regards,
    Raj

  • Vendor and Customer Hard and Group Currency balances

    Please let me know the table names of Vendor, Customer and GL balances for Hard and Group currencies (Ex KNC1 for Customer balance in Company Code Currency)
    Ramesh

    I don't think they are available.
    But if you have any requirement in the customization report, you can convert the values of KNC1 with TCURR table rates based on the posting date.
    Rgds
    Murali. N

  • Where to enter Due Date and group currency amount in BAPI_ACC_DOCUMENT_POST

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

  • 0fi_gl_6 - available local and group currency

    Hi,
    I have a problem with DataSource  0fi_gl_6. I need to consult accumulated balance in local
    and group currency. I know in GLT0  this information is available.
    In spite of this I could not see them when I load it in BW.
    Can you help me?
    Thanks.

    Dear Ana, Dear Catherine
    Maybe I come a bit late now, but I faced the same issue this afternoon.
    Datasource 0FI_GL_6 is still in version 3.x. So it seems that you need to create two different Infopackages for the initialization of the delta, one selecting Currency Type 10 and one for Currency Type 30. The Delta-update infopackage will update the selection automatically once the system is initialized.
    Maybe 1st check in RSA3 in the sourcesystem if the extractor gives any data for your selection. 2nd create the 2 Initialization Infopackages. Then 3rd open the infopackage, go to 'Scheduler' --> 'Initialization options for source systems' and delete the old entry for 0FI_GL_6. 4th go to RSA7 in the source system and verify if the entries are really gone; if they're not gone, delete them manually. Then run both infopackages. From now on, the delta update will update for both, Local and Group currency.
    I hope this helps
    Josef

  • Material ledger and cost estmate

    Hi all
    Can any body tell me the impact on material ledger of deleting the current standard cost estimate from material master? The requirement has come for change the current standard cost from material master whom we have released on 01.01.2008 and now today at 07.01.2008 we want to change this. All the transactions for material in current period I have got the reverse. Now I will delete the cost estimate from T_code CKR1 and than the new standard cost will releases from today in same period. At month end we are going to run the actual costing. Would be any problem in actual costing?
    Thanks and Reagrds
    Vinay Thakre

    thanks Pascal for prompt response,would you please advise my below understanding to ML and actual cost
    1)CKMLCP - Edit Costing Run to create costing run to calculated periodic unit price
    2)Because there are some activities in CKMLCP,we have to respectively execute CKMF / CKMG/CKMJ /  CKMH / CKMI for each activity of costing run
    3)after costing run with  CIMLCP,SAP will use calculated periodic unit price to revaluate inventory for previous period,and the price indicator S automatically  changed to V for previous as well.
    4)SAP will generate FI cocument to adj inventory and consumption cost after "post closing"
    5)there is different periodic unit price for each closed period
    5)the price indicator for closed period is always V,the price indicator in current period is S

  • Material ledger and standard cost estimate

    Hi Gurus,
    When standard cost estimate is done in a scenario, where  material ledger is activated, does the entire stock get revaluated andl post a credit in my P/L? Is it possible  to keep my inventory(FG and SFG) at periodic unit price ie at the actual manufacturing price over a longer period say 3 years? Please fill this gap in my understanding.
    Best regards
    Vimal

    Hi Vimal,
    Material ledger uses the standard price as 'preliminary price' always during the current month, independent of the question if a new standard price was estimated and released.
    But: After period end, when the actual price is calculated the posting will adjust the inventory and P/L accounts to the actual price, with posting date in the recent period.
    That means if you have a material that was manufactured once and then consumed over a 3 year period, and during that period you calculate the same material in a standard cost estimate with changing results, that would mean: Looking back at any month during the 3 years the consumption and stock values will be valued at the actual price of manufacturing. But during the currently open period it will always be valuated at the price of the last released cost estimate.
    I hope I understood your scenario correct...
    Best regards,  Udo

  • Material ledger and cash journal

    In a company code where and how do I check whether cash journal and Material Ledger is activated or not?

    In fbcjc0 check whether any business transactions are set up or not in respect of your company code or not.

  • Material unit Price different in comp code curr and group currency

    In our case, there are two currencies : INR and USD.
    Material Ledger is active in our case.
    Material = Raw Material with price indicator 'V'.
    In the current period it is seen that the INR price and USD price in the material master shows different values
    i.e. INR = 110 and USD = 550
    Based on the conversion rate (1 USD = 55 INR), the INR = 110 and USD = 2 per unit.
    But why this is showing like this ?
    Please help to resolve this at the very earliest, please.
    Are we missing any transactions in the Material Ledger, please comment.

    Hi Nikitha,
    Compare price history in INR and USD in t-code CKM3N to pinpoint which transaction caused the difference. I would suspect MR21 or MR22 postings that only updated INR or USD values.
    Regards.

  • Material Ledger Additional local currencies for company code

    Hi Expert,
    I would like to add a second local currency in the "Additional local currencies for company code" in order to have 2 currencies available for material ledger. (Material ledger is not yet activated for this company code)
    The second local currency must be the group one "30". Could you please tell me wich valuation I have to choose ? 0 1 or 2.
    I went on the SAP library but I didn't find something clear. I tried 1 but I have an error message...
    Thanks and regards

    Hello,
    I also recommend:
    1442153   Transfer price valuation for material transfers
    532932    FAQ: Valuation logic with active material ledger
    1253944   Activating actual average moving price posting logic w/ ML
    Cheers

Maybe you are looking for