Enhance option in ECC6.0

Hi Experts,
Can somebody explain me the purpose of "Enhance button" (Shift + F4) in the ABAP Editor (SE38); prefrably with a small example.
Any helpful entry will be rewarded.
Warm regards,
Raman.

Enhancement spots are provided ECC6.0 onwards for making enhancements directly into the code provided by SAP without using user-exits / BADIs.
Use Change Mode for creating enhancement points & sections.
use button Display <-> Change       to switch to change mode.
Use Enhancement Mode for creating enhancement implementations.
use button Change Enhancements      to switch to Enhancement mode
use button Display <-> Change      to leave Enhancement mode

Similar Messages

Use of Enhanced option in Interface Determination

Hello All,
I am stuck up with a problem, where I need your expertised help.
The scenario is IDOC --> Files
what I mean by files is: I have one sender (ecc system) and two receivers (ftp destinations using file adapters). I created multi mappings (1:n); based on the content of the IDOC field, either Message Type1 or MessageType2 are populated in the message mapping. Each MessageType belongs to separate receivers. Message mapping working good when tested in the test tab.
Now, coming to configuration side; I have created one interfaced determination with enhanced mode and gave the Message interface information, which populated both Message Interfaces below automatically. Interface is failing with "No receiver Agreement for the sender receiver combinatio". I checked all the cache refresh and also the receiver agreements. I have both receiver agreeements defined, one of each receiver. I guess something to do with Interface Determination definition.
Questions:
1) In the interface determination, what receiver system we need to specify. I have two receivers here; I don't see space to specify both when selected enhanced option.
2) How do I specify receiver determination for this?
Thanks for your help..RP

I just looked into the error message deeply. This is why it is errroring out. any idea is a great help.
In the Interface determination, I have * for the receiver.
In the Receiver determination, I have both receivers defined.
In the bottom section of the Receiver Determination, It is showing both message interfaces for each receiver like below
Receiver1
   MessageInterface1 -- Interface Mapping -- Receiver Agreement
   MessageInterface2 -- Interface Mapping -- Does Not Exist
Receiver2
   MessageInterface1 -- Interface Mapping -- Does Not Exist
   MessageInterface2 -- Interface Mapping -- Receiver Agreement
In the Moni, I see two child messages as they are supposed to, one for each receiver and and both failed.
Both messages failed with the similar message statinng that 'No receiver agreement found for sender xx and receiver combination'. This error is for the other message interface which does not beloing to that receiver (MI information also shown in the message).
Thanks for your help..

Nokia 2600 classic missing the ENHANCEMENTS option...

HI,
The ENHANCEMENTS option is missing under my SETTINGS.
Is that why I can't hear any sound thru the phone earpiece or the earphones?
I've tried several times to reset the RESTORE FACTORY SETTINGS AND RESTORE ALL under SETTINGS and the problem is still there.
There are no updated software on the nokia website yet.
Can anybody help me out?
Thanks,
Stewart

The 2000-series phones are not usually included in Software Updater, because they are basic phones designed mainly for users who don't use PC Connectivity.
If you are hearing nothing through either the phone speaker of the headset, then it points to a fault rather than a setting, since connecting the headset should switch between the two sound outputs. You may have to get the phone checked by Nokia service.
Message Edited by mccbleue on 23-Jul-2008 09:33 AM

Do we have Enhancement option in Standard BSPs?

Hi,
Do we have Enhancement option in Standard BSPs instead of Coping the standard one and modifying if?
If no, why SAP not provided this option?
Regards,
...Naddy

Hi Naddy,
when you use the ABAP Workbench to build a BSP application it is unlike most of the other ABAP application builders. This is because you are not actually building the end ABAP class, you are filling out a template and the class gets built when you activate the BSP page.
This is similar to SmartForms, where you use the SmartForm designer tools to build the form but when you activate it is creates a function module that is executed to run the form. It is also similar to many of the code-building wizards that are becoming more prevelant.
The Enhancement framework is designed to hook into enhancement points inside ABAP programs. So to work you would have to attach the enhancement to an enhancement point in the generated ABAP program.
While this is possible, the next time you activate the BSP (or SmartForm) it could quite possibly generate a different ABAP program with a different name. Therefore the enhancement would no longer be attached to your BSP.
Cheers
Graham Robbo

Internal error occurred when displaying enhancement options

Hi All,
I am having an Error - "Internal error occurred when displaying enhancement options" (Message no. ED294) when trying to click on to the "Show Implicit Enhancement Option" inside the Edit > Enhancement Operation in SE37 TCode while Enhancing the FM : QAPP_CUST_IP_F4 in ECC 6.0 environment. For this error I am unable to go ahead with the enhancement process.
I have applied OSS Note 951293, but in vain. Pls help!

Nikhil.
Did you ever solve this issue. I see the same issue?

About Enhancement Options:CrossOriginResourceSharingRequestorsForByDGroupware

Hi , experts
Who know the enhancement options clearly in cloud application studio.
I meet some trouble about enhancemnet option:CrossOriginResourceSharingRequestorsForByDGroupware,
I want to get some help from you . Could somebody tell me what this use for and how to use it?
what scenarios can call this enhancement and which work center can trigger it?
Please provide me some useful information and clues. Thank you !

Hi,
For Details Check this link-
http://www.sap.com/solutions/business-suite/erp/enhancement_packages.epx
http://download.sap.com/download.epd?context=AF47734897DE1CB5E0BE0AFA9A5608AAF867BD6437451DABD4596BF148080AF36D76338812A0D980012B441399C4E2C3E87CEF925C8EA197

Enhancement-Point in ECC6 Issue

Hi all,
We recently did an Technical Upgrade from ECC5 to ECC6.
After the Upgrade, during the Syntax Check in one of the custome reports we developed, we are getting an error "The statements ENHANCEMENT-SECTION and ENHANCEMENT-POINT (without the STATIC addition ) can only be used in executable coding".
When I checked, i found that this comes from a standard include I_RFIDYYWT_FICA_SEL which is called inside out custom report. There is an Enhancement-Point without the STATIC addition and this is resulting in this issue.
Coudl you please let me know whether there is any way by which we can deactivate this Enhancement-Point or is there any other solution to over come this issue.
Many thanks in advance,
Regards,
Anoop R.S

Hi,
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Implemeting User-exit..
go to t-code smod -->enter the Exit name --> click on display --> click on components
                                                                  --> clcik on Finction module
                                                                  --> click on include under function module
                                                                   --> it show warning message ignore that and hit enter and write the code
and activate again the SMOD..
Prabhudas

I want to update enhancement category in ECC6 for Z-Table

Hi,
I am working in Upgrade project from 4.5B to ECC6. In Ecc6 I want to update Enhancement category for Z-Table but this facility is not avilable in 4.5B.
Unless updating enhancement category for Z-Table then it is throughing runtime error.
But Z-Table has some datas. My question is if update enhancement category and save and activate this Z-Table then is there any problem affect to that table data.
Or any other problem will be arised ?
Waiting for quick response.
Best Regards,
Padhy

Not to Worry Dear.. enhancement catagory is like u want urr table to be enhanceable (i.e the no of fields can be increase , decrease or edited)
so its just an catagory setting or configuration like do you want to allow others to change fields setting in your table.
so actual proble may occur when u add, remove or edit fields list. (ofcourse when you have made it enhanceable)
so if there is possability of data truncation then u will get error and you have to go to SE14 for Table adjustment
No Rewards Plz..

6300 Enhancement Option Missing!

I have 2 of these, one for work one for business. I have a car handsfree cradle and can use my business phone no problem but cannot connect my own model. The business phone has an option under enhancements for "Headset" but my own one does not have this option, only "charger". As a result I have been unable to use the incar set up for my own phone.
Do you think this is a fault or firmware problem. Both are on O2 contracts so I would not hold out any hope of upgrading the firmware

Hello frmshyam and all of others,
We already know whats happen... we contacted SAP people and they inform us that is a kind of limitation of the contract agreed by our company and SAP!
Inclusively we can check that when we try to download some ERP system DVD media directly from marketplace, we don´t see anything, we only see the media DVD´s of solution manager system.
Thanks anyway for your help.
Best regards,
João Dimas - Portugal

Enhancement option for excise duty calculation program - /BEV2/EDMSESES

Hi,
My requirement is to enhance the excise duty calculation program /BEV2/EDMSESES. I searched the user exit using the package /BEV2/ED, but was not able find any user exit. So can you please help me how to enhance this standard program.
Thanks in advance,
Sudhanva

Hi,
My requirement is to enhance the excise duty calculation program /BEV2/EDMSESES. I searched the user exit using the package /BEV2/ED, but was not able find any user exit. So can you please help me how to enhance this standard program.
Thanks in advance,
Sudhanva

How to figure out suitable Enhancement Option/point

Hi All,
I have to limit creation of vendor for a particularly one user based on Country Code.
For ex
if sy-uname eq 'XYZ'.
IF LFA1-NAME1 NE 'US'.
ERROR MESSAGE...
ENDIF.
ENDIF.
I know how to do that user user exits and was trying to figure out how can i achieve this using enhancement frame work in ECC 6.0
I found all below Explicit Enhancement Points/Sections when i searched in Pragram SAPMF02K (xk01)
If you just post the relevant coe, it has a better chance of formatting.
MY QUESTIONS ARE
1) How should i figure out which enhancement point i should use for particular issue (When the user is going from Vendor Address to Vendor control Screen while creating the vendor. It should an error mess if the user is using wrong vendor code?
Thanks in advance
Venki
Edited by: venki gundla on May 31, 2009 10:05 PM
Edited by: venki gundla on May 31, 2009 10:16 PM
Edited by: Rob Burbank on May 31, 2009 6:37 PM

Hi All,
For some reason ,every thing is continous. I know it sometimes irritating but i couldn't find a way to post it
Line by line.
Actually
MY QUESTIONS ARE 1) How should i figure out which enhancement point i should use for particular issue (When the user is going from Vendor Address to Vendor control Screen while creating the vendor. It should throw an error mess if the user is using wrong vendor country name than he is authorized to?
Thanks
Venki

Enhancement points in ECC6.0

Hi Friends,
can anyone please share the documents related to enhancement points (spots) in ECC 6.0?
Regards,
Ravi.

Enhancement points - Changing standard SAP code using the implict and explicit enhamcement points
Enhancement points are basically hooks at certain defined points within the ABAP code i.e. at the beginning and end of a FORM. These hooks allow you to attach your own custom code which will be executed as if it had been hard coded into the code using a modification. Unlike hard coded modifications these will not be lost during upgrade or patching exercises.
There are 2 types of enhancements with the enhancement framework:
1. Explicit enhancement points: These are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose u2018Enhancement Implementation->Createu2019 Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal.
2. Implicit enhancement points: These are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMu2019s, at the end of a program, include or function module etc. Click here for demonstration of how to implement an implicit enhancement point!
Search for enhancement in sdn you will get demo also.

Adding a field to a structure in an implicit enhancement option

I'm just trying to append a field to this internal table:
DATA: BEGIN OF gt_outtab OCCURS 0.
DATA: knumv         LIKE ekbe-knumv.
DATA: srvpos        LIKE ekbe-srvpos.
DATA: ktext1        LIKE ml_esll-ktext1.
INCLUDE             STRUCTURE mmhipo_mainlist.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(4 ) Estr. GT_OUTTAB, Final                                                                                S
DATA: END OF gt_outtab.
DATA: gs_outtab              LIKE LINE OF gt_outtab.
The point is that I don't know how to use the editor to write the new field on the implicit enhancement.
Thanks guys!!

Hi,
After going to the particular program which you want to enhance, just click on enhancement button. (spiral one) and then take the menu path EDIT -> enhancements-> show implicit enhancements.
Now you can see the available implicit enhancements highlighted with dark orange color.
Right click on the one you want and select the enhancement -> create.
Enter the implementation name and the description which you want and click on ok button.
Now you can see the inserted implementation in your standard program.
And in between the inserted lines you write your code and activate it.
Reward points if you find it helpful.
Regards,
Prasanna

Enhancement options in transactions ME51N and ME21N of ECC 6.0

Hi Experts,
We are in version 6.0 of ECC. Is there a way to create a custom button in transactions ME51N and ME21N, without altering standard code? Using BAdIs or user exists?
Thanks and regards,
José Omar

Hi,
You can create ....using the exit MM06E005 for me21n ..and MEREQ001 fro me51n..
Thanks,
Shailaja Ainala.

Tool Bar at top with file, edit and enhance options disappeared - need help now.

I cannot access my catalogs for reach my photographs. Have to get them for speech this coming Monday for a photography society. Please Help !!

Thanks for the response. I have already solved the problem - the screen had to be pulled down to show what was underneath. Thanks for writing. Have a good day.
Frank Sharp

Enhance option in ECC6.0

Similar Messages

Maybe you are looking for