Enhancement request for sales order closure/cancel

Hi Guys,
One of our customers has requested that when a user goes to close/sales order, the standard system message is:
"Cancelling or closing of this document is irreversible. Continue?"
Can this be changed too:
"Closing of this document is irreversible. Continue?" - when closing a sales order and "Cancelling of this document is irreversible. Continue?" when cancelling the sales order.
Kind Regards
Tanveer

Hi
Make use of this
Order Confirmation BA00 /SMB40/RVADOR01 (ENTRY) SmartForm /SMB11/BL_SDORC_L
Regards
Kiran Sure

Similar Messages

Request for sales order

hi
can any one send me the smartform as well as program for sales order .
in ecc 6.0 no standard smartform avilable .
REGARDS
RAKESH SINGH

Hi
Make use of this
Order Confirmation BA00 /SMB40/RVADOR01 (ENTRY) SmartForm /SMB11/BL_SDORC_L
Regards
Kiran Sure

How to find out Enhancement details for Sales Order

Hello,
Follwing is the scenerio:
As soon as Third Party Sales Order created, Header Billing block gets triggered (from Sales Doc settings in VOV8).
In Sales Order there are 4 items of items:
1. Hardware Material (Price) with Item Category, say A
2. Hardware Material (Free-of-Charge) with item category, say B
3. Service Material (Price) with Item Category, say C
4. Service Material (Free-of-Charge) with item category, say D
Now there is another billing block, at item level, for Hardware Material (Price) - item cat. A, ONLY.
I checked item cat. in VOV7, and this block is not configured there.
Sales Order saved (with pop-up message - Maintain Serial No. for Material, but as it's third party Order, stock is not in Inventory, so no Serial number at this point of time). PR triggered upon saving the Order. from PR, PO gets generated,and then MIRO.
Now, as vendor Invoice received with Stock details (Manufacturer's Serial No.), we go to VA02 and maintain Serial No. (Extra --> Serial No.) for all 4 types of material (Pls note that Billing block is for Hardware Price Material, but we need to maintain Serial No. for all 4 types of material) and save order.
As soon as, serial no. maintained, item level billing block gets removed for Hardware (price) material, automatically.
I need to understand how this functionality has been achieved?
More precisely how and where i can see the technical details, like What program is being developed, which user-exit is being used etc...
Thanks.

Hi Sumitra,
Since the system exit handler has to call your BADI go to SE24 and display
CL_EXITHANDLER
Chose method get_instance and set a break point.
And, then press F8, so it will show all the Badi's.
Regard's,
Shivesh Ranjan.

Problem submitting batch request for sales order creation

Hello experts,
I have created a gateway service, implementing the CREATE_DEEP_ENTITY for order creation. I have tested my service with the Chrome Advanced Rest Client and it works fine with the following XML request:
<?xml version="1.0" encoding="UTF-8"?>
<atom:entry xmlns:atom="http://www.w3.org/2005/Atom" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<atom:content type="application/xml">
<m:properties>
<d:OrderId>0</d:OrderId>
<d:DocumentType>TA</d:DocumentType>
<d:CustomerId>C6603</d:CustomerId>
<d:SalesOrg>S010</d:SalesOrg>
<d:DistChannel>01</d:DistChannel>
<d:Division>01</d:Division>
<d:DocumentDate m:null="true" />
<d:OrderValue m:null="true" />
<d:Currency m:null="true" />
</m:properties>
</atom:content>
<atom:link rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/SOItems" type="application/atom+xml;type=feed" title="SALESORDERTSCH.SOHeader_SOItems">
<m:inline>
<atom:feed>
<atom:entry>
<atom:content type="application/xml">
<m:properties>
<d:OrderId>0</d:OrderId>
<d:Item>000010</d:Item>
<d:Material>C20013</d:Material>
<d:Plant m:null="true" />
<d:Quantity m:Type="Edm.Decimal">100.000</d:Quantity>
<d:Description m:null="true" />
<d:UoM m:null="true" />
<d:Value m:null="true" />
</m:properties>
</atom:content>
</atom:entry>
<atom:entry>
<atom:content type="application/xml">
<m:properties>
<d:OrderId>0</d:OrderId>
<d:Item>000020</d:Item>
<d:Material>C20014</d:Material>
<d:Plant m:null="true" />
<d:Quantity m:Type="Edm.Decimal">200.000</d:Quantity>
<d:Description m:null="true" />
<d:UoM m:null="true" />
<d:Value m:null="true" />
</m:properties>
</atom:content>
</atom:entry>
</atom:feed>
</m:inline>
</atom:link>
</atom:entry>
Now that my service is working, I want to be able to call it from a SAP UI5/Javascript application. In order to process multiple items for one order header, I use the OData batch request. Here is my Javascript method that is being processed:
executeOrderCreation : function() {
// Retrieve model from controller
var oModel = sap.ui.getCore().getModel();
oModel.setHeaders(
{ "Access-Control-Allow-Origin" : "*",
"Content-Type": "application/x-www-form-urlencoded",
"X-CSRF-Token":"Fetch" }
// Define data to be created
var headerData = {
OrderId : "0",
DocumentType: "TA",
CustomerId : "C6603",
SalesOrg : "S010",
DistChannel : "01",
Division : "01",
DocumentDate : null,
OrderValue : null,
Currency : null,
varItemData1 = {
OrderId : "0",
Item : "000010",
Material : "C20013",
Plant : null,
Quantity : "100.000",
Description :null,
UoM :null,
Value :null,
varItemData2 = {
OrderId : "0",
Item : "000020",
Material : "C20014",
Plant : null,
Quantity : "100.000",
Description :null,
UoM :null,
Value :null,
var batchChanges = [];
oModel.refreshSecurityToken(function(oData, oResponse){
alert("Refresh token OK");
}, function() {
alert("Refresh token failed");
}, false);
oModel.read('/SOHeaders/?$Batch', null, null, false, function(oData, oResponse) {
// Create batch data
batchChanges.push(oModel.createBatchOperation("SOHeaders", "POST",headerData ));
batchChanges.push(oModel.createBatchOperation("SOHeaders", "POST",varItemData1 ));
batchChanges.push(oModel.createBatchOperation("SOHeaders", "POST",varItemData2 ));
oModel.addBatchChangeOperations(batchChanges);
// Submit changes and refresh the model
oModel.submitBatch(
function(oData) {
oModel.refresh();
function(oError) {
var error = oError;
alert("Read failed" + error);
false);
}, function() {
alert("Read failed");
The result is when I submit the batch, I have an error saying: The following problem occurred: no handler for data -
Am I doing right in the batchChanges creation ? (Header then items)
Why am I facing this error ?
Any help would be greatly appreciated.
Thanks and regards,
Thibault

Hi,
you should also have '/' before collection name so that it will be /SOHeader and as below.
batchChanges.push(oModel.createBatchOperation("/SOHeaders", "POST",headerData )); batchChanges.push(oModel.createBatchOperation("/SOHeaders", "POST",varItemData1 ));
batchChanges.push(oModel.createBatchOperation("/SOHeaders", "POST",varItemData2 ))
Regards,
Chandra

Notification for sales order cancellation

Hi,
is there any way that when a sales order is cancelled in r12.0.6 that a notification of its cancellation can be sent to the final approver of that particular sales order.

One way may be to write an event alert on oe_order_headers_all
The alert can identify the original approver and send an email.
Sandeep Gandhi

Authorisation request for this document was cancelled

Forum,
I have an approval stage and template configured in SAP when a sales order is raised it prompts the user for authorisation. Whilst this is ok'd the order is placed in a 'Draft' status. Upon trying to add one particular order, i get the following message:
The authorisation request for this document was cancelled. The document cannot be added inless the authorisation request is restored.
As he needed to get the order processed. I advised he duplicate the order and re-add it this time ensuring the correct authorisation procedure is carried out.
Why would this occur?
Regards,
Juan

HI Juan
The question u have asked is nor very much clear the first scenario is that once the approval is rejected the document saves in draft well if thats the concern than this is the way the approval procedure is defined that without approval the document should not have any affect on the system whereas rightly said by fellow geniuses u can have multiple person to approve if one is not present other can approve it this would save time and effort for you
The second scenario is that the approval procedure u have assigned gives u the message with one particular document and its fine with rest if thats the case then i would request you please check the query if there is any associated with the approval procedure
Regards,
Manish

User exit for Sales order

hi,
i need to eliminate leading zeros for PO number which comes in SO created trough ALE.i found the enhancement for the FM idoc_input_orders.in that enahancement we have 12 FM's.my Leading zeros are comming for field belnr which comes in e1edk01 segment of idoc orders05.now i had coded my part of coding in FM exit_saplved.._oo1 and i had activated that.but it is not working for me.than i tought of going to other FM exit_sapl..._009.in which i'm not able go into the include either.plz help me out.thank you.

Hi, Krishna!
With IDOC_INPUT_ORDERS during IDoc interpretation PO number is assigned to XVBAK-BSTKD field which is later used for sales order creation with reference to PO.
So all you need is to use some customer exit with changing parameters containing XVBAK after IDoc interpretation is completed. For example you can use EXIT_SAPLVEDA_009 which is called at the end of IDoc check after interpretation.
Regards,
Maxim.

RBA GATP check is not getting invoked for Sales Order

Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit Dutta

Hi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala.

How Sales Order Created,Cancelled

Hi Experts
Can any one explain me on
How a Sales Order is Created and Line Items are included to the Sales Order
How the Created Sales Are Cancelled and How does
What happens a Sales Order is cancelled at Header Level...technicall speaking all the line items in that sales order will also be cancelled
When i checked the Change Logs are Header Level for a particular Sales Order it is displaying that sales order is cancelled
But when i check the Change logs at litem level the cancelled info is not replicated
How does this whole sales order is processed.......
In which tables (I checked CDHDR,CDPOS)...THESE SALES ORDER ARE SAVE
THANKS in advance

hi,
the first option is the right one. the FM invoked makes a direct input, so all the functionalities in S.O. are the standard one in the same way as if you are making it manually.
Also you can have some exits in the Idoc FM, so you can manipulate data there before loading the sales order.
pls. reward if helpful
regards
Roberto

When sales order get cancelled

Hi Gurus
Please explain the process when sales order is created for 10 QTY and production order released for 10 qty and all operations confirmed for 5 QTy & moved to FG remaining 5 no qty is in WIP, so then sales order get cancelled, and got another new sales order with different specifications with same qty.
now i want convert the cancelled sales order qty to new sales order qty
please explain me step by step
with Regards
Laxmipathi.G.V

Hi
Anyway you were doing the Activity confirmation for the 5 quantities at the operation stage.
so the component only consumed for this production .when you check the material document for the particular confimation . you can see the component was consumbed. ( 261 movement)
So you do the reverse the confirmation at the operation stage CO13 . and you can reverse the components back to the production storage location back. (movement type 262)
Edited by: raj on Jun 8, 2009 8:11 AM

How to implement Approval hierarchy for Sales Order in Order Management.

Hi,
We need approval process for sale orders in Order Management module. Currently we are using credit HOLD option for orders at shipping level. The issue we are facing now is we can not cancel those orders who contains Service Line item in it while on HOLD. The restriction raised at the time of cancelling the order that the Line Item is "fulfilled". Service line item's get fulfilled.
Is that any other possibility to have Approval hierarchy for Sales Orders in Order Management Module? If it is possible can anybody share the related document or implementation guide?
Thanks with anticipation in advance.
Many Regards
Kaleem Bhatti

I copied the standard order header workflow and the "Book Order, Manual" workflow to custom workflows. I then modified the "Book Order, Manual" workflow to put another completely custom workflow (call this "Approvals") in between the "Book Eligible" and "Book" steps.
The "Approvals" step assessed the sales order, changed the order header to the pending approval flow_status_code, and sent out the appropriate notifications. The "Approvals" step returned a Complete/Incomplete where complete would proceed to "Book" and incomplete would go back to "Book Eligible." The new workflow was then assigned to the order type needed. I don't still have access to that environment (job change) or I would give more definite instructions.

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

How can we identify what are all user exits are there for sales orders,deli

Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel v

Hi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you

Results Analysis for Sales Orders

Hi
When i am calculting Results Analysis for Sales Orders as a part of Month End Closing Activities there are some errors for few orders...
Msg Type: E
AppAr: KJ
MsgNo: 216
Message Text: Planned Cost for Valuation are 0. Please Check the Object.
Can any one tell me what might be the error..
Thanks in Advance..
Sivaram

Hi,
The error is offen caused by one or possible more than one of following statements:
- the delivery block of the order is set
- the billing block is set
- the schedule line ( confirmed quantity ) is missing
- the position has been cancelled
- price condition is missing
In case no one of the mentioned options wouldn''t help, set the position status to technically completed, if the position is processed as well ( delivery, invoice, etc. ).
We often face this kind of issue
Good luck
Marian

User Exit and BADI for Sales Order

Dear Experts,
please give me available user exits and BADI for sales order .i want to take the data from sales order at the time of sales order posting .

Hi,
In debugging you can find some Enhancement Spots where you can implement your code. This lets you ignore the need for access key, but its a time consuming process spotting out the exact enhancement point.
Regards
Karthik D

Enhancement request for sales order closure/cancel

Similar Messages

Maybe you are looking for