Enlarge/Reduce image for copying on HPC309A

How do I enlarge or reduce the size of the image when copying on the HPC309A?
Thanks for your help,
Tehachap
This question was solved.
View Solution.

Press OK button to light the screen if it is in power save mode. Move the up or down arrow to "Copy", press OK, press the "Settings" button then scroll to "Size", OK, then scroll up or down to the appropriate setting. If you select "Custom", OK, you can use the up and down arrows to select the Enlarge/Reduce scaling factor, then press OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

The best way to enlarge an image for print?

Hello
I've been designing for print for several years. Occasionally I design large display posters/banners (A0, 6-sheet, billboard etc) which use a photographic image. Assuming that the image I have is smaller at 300ppi than the final print, what is the best way to enlarge the image? Based on my experience, it seems that there are three options (to make it simple, the example here assumes that my image is exactly half the size it needs to be printed at. I'm also assuming that the file I will supply to the printer will be a high res pdf exported from Indesign):
1. Set up the Indesign file at 100% size, place the photo and have Indesign upscale the image to 200%. Export a high res pdf for print.
2. Set up the indesign file at 50% size, place the photo with no upscaling by Indesign. Export a high res pdf and have the printer blow it up to 200%.
3. Set up the Indesign file at 100% size, enlarge the photo in Photoshop to 200%, and place the photo with no upscaling in Indesign. Export a high res pdf for print.
I have been advised that having Indesign upscale the image is not a good idea, and I never do this. I guess that option 3 is probably best, with Photoshop doing the work and the resulting pdf being the correct size. However, it's not always possible to do this – some posters are huge which means that the enlarged photo and the high res pdf will both be huge files, and I think also Indesign has a maximum document set up size anyway. So sometimes I use option 2.
So firstly, why is it a bad idea for Indesign to upscale the image (as I say, I never do this, but I would like to know the technical reason)? Secondly, if the choice is between re-sizing myself in Photoshop prior to exporting the pdf, or having the printer enlarge a high res pdf, which is better? When I say 'better' I mean in terms of the quality/sharpness of the end result. Also, I assume that vector elements in my design will not be adversely affected in either scenario, is that assumption correct?
Thanks

Sorry for the added confusion. It appears, after doing some checking in my CS2 apps ( InDesign), there is no setting for DPI / Output Resolution. Only Transparency Flattener Setting. See screen shot below...
If you select Postscript File in the Print Presets, you can access resolution settings for transparency flattening there, too...
in the "Advanced" tab dialog...
But, I like having the option in Illustrator 10 File > Document Setup where I can set the output resolution to whatever is appropriate. In this case ( below ) I've got it set for 5080dpi / 300ppi. You also have Effect > Document Raster Effect Setting where you can select 300ppi ( see screen shot below )...
...and Raster Effects Resolution setting...
I may have misled you because the apps I have are not CS6; but you should be able to follow along in your CS6 apps in various settings dialogs. Mainly, resolution settings can be set in the Print dialog boxes.
The main thing to keep in mind is, because you are enlarging upon output, the base scaled down file must have enough resolution to maintain its appearance at the final size. In the case of 50% or 25% file resolution should be maximum ( for current apps it appears 300ppi is considered high resolution. Most apps now leave output resolution setting adjusted in the RIP / Print driver.
I still use Distiller because it allows me to setup custom PDF settings and save them for future use. You very well may be able to do that in CS6 apps; but I have a tried-and-true workflow that utilizes Distiller as a personal preference.

Reducing image file size for web use without pixelation

Can anyone help me figure out how to best reduce images for fast web loading (in slideshows in Muse). I have done the save for web in PS and they are super pixelated now. The only versions that do not lose quality are the original size and they are huge files. Any help is appreciated.
Also can anyone tell me how big each image should be, what is considered a too big size (kb) for web images? Thanks Hillary

The settings I used were in the save for web panel and I saved the image as "medium" and the quality was 30, optimized was checked and it was scaled down to 16kb instead of 700kb. Is there a guideline as to how large in kb an image should be for good loading, it seems like with faster internet speeds we can go a bit larger for asset size. Is it OK to have an image as 65 kb if it is quite large (8 inched wide)?
I think I solved the problem. I just went in and saved the images as larger quality. I hope it does not slow things down too much. Any advice would help.

Bridge CC when copying resizes window to both monitors and enlarges all images to maximum size

Bridge CC when copying an image resizes window to both monitors and enlarges all images to maximum size.

Details, please.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

On Ibooks Author, my programmed image for the Chapter page no longer shows up on new pages, just appears as a question mark inside a box, How do I fix this?

On Ibooks Author, my programmed image for the Chapter page no longer shows up on new pages, just appears as a question mark inside a box, How do I fix this? Please help, its the same when I try and copy and paste the same image within Ibooks author.

https://discussions.apple.com/message/24420017#24420017
You may have moved or removed content on your page or its possible you used the"Adjust Image" and over sharpeed one or more images.
I assume you mean it does not show up of new Chapter pages... have you checked the template?
Where you see the ? you need to either reduce teh box outline size - or drop anther copy of the original image onto it, it may fill the ? box or sit on top.... delete the ? box.
If its Chapter page only related, its better doing this in the template.
Is you image .jpg or .png?

How to reduce image file size in spreadsheet

I have created a spreadsheet that contains cells with small amounts of text, and images that I brought in from the Media Browser from iPhoto. This has caused the file size to become HUGE, on the order of 234 MB. Saving it as a pdf only reduces it to 220 MB.
I have tried the Format>Image>Reduce Image File Size, as well as File>Reduce File Size, but in both cases, those options are grayed out.
What am I doing wrong? All I really want is thumbnail versions of my image files.
I don't understand what the Reduce Image File Size command would be used for, if it doesn't work for this?

When you insert a picture in a cell, it's used as a background.
To do that, the app keep it in a size allowing it to accomodate the larger cell size permitted.
If you want to get small images matching the cell size which you use, you must reduce the picture by yourself before inserting it. For instance, cells are often 72 * 16 pixels ones so you may reduce your pictures so that thir width become 72 pixels.
Of course, if the user enlarge the cell, the picture will become highly pixelated.
Look at this example.
In B4 is the original : 202 x 177 pixels
In C3 is the reduced one : 72 x 63
in B2 is the reduced one in a 202 x 177 pixels cell. It's awfully pixelized
We must arbitrate between size and quality.
Yvan KOENIG (VALLAURIS, France) samedi 10 septembre 2011 16:50:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Does reducing image size reduce image quality?

i 'm new to AI and also to this forum.
I know that enlarging and image can reduce image quality.
I'd like to know if reducing the image size (not in pixels, but in actual size),
will reduce the quality?
i have a Ai file that's 600x300, and need to reduce it to 300x120 my websie.
Before I convert it to a web format, I want to reduce this large Ai file to 300x120.
Will i still lose quality even if it's still an Ai file, before converting to web format???
thanks!!!!!

No it is however best to use save for the web to do so for the best optimization.
keep in mind the only lose in quality will be if some one grabbed it off of the website and tried to enlarge it or view it at a larger display size.
What you want to do is the best way of reducing the size.

Images for tabs are not getting displayed in the page

Hi,
I have given images for tabs on a page. when iam applying images from the local disk, it is showing the images in edit mode. But when I view the page, it is not showing any images.
Where should i copy the images I use in my pages. I ahev copied all the images in the images directory of portal30 in server.
Please help.
Murthy

Hi,
Please check the httpd.conf file in your server for /images alias. The /images alias will point to a directory. Copy your
image files in that directory.
Thanks,
Sharmila

How can I use a JPEG file as a background image for my vi in 8.5

Im working on a vi that I plan on using as part of an alarm system. I would like to use a JPEG file of my house as a background image for the vi, or possibly to just be displayed in a window on the control panel. I have seen people use their own images before, but never looked at what this involved.
Im trying to use the "read JPEG file" vi and the "draw flattened pixmap" vi to accomplish this. The vi does run, but nothing shows on the front panel. If I try to create an indicator from the "new picture" output of the "draw flattened pixmap" vi, I get an empty white window on the front panel.
Any advice?
Thanks
Solved!
Go to Solution.

Guruthilak wrote:
the earlier vi (using the JPEG) works fine. just increase the size of the picture control
I figured this was the problem. And to the OP, I'm glad a bitmap worked, but no I didn't mean use any sort of LabVIEW programming at all. I meant open your image in Microsoft Paint, Press ctrl+A to select the whole thing. Then copy the image to the clipboard. Now select your front panel and press ctrl + v to paste it. No programming needed and the image is there. However, if you want to programmatically change it, you will need a picture control.
CLA, LabVIEW Versions 2010-2013

ACR Raw images wont copy to Jpeg or Tiff; as it fails with "Cannot Create File"

Requesting immediate help if anyone available currently
I've been using Photoshop CS6 for several years, never a problem at all. As soon as I bought Creative Cloud, I see many issues that cannot be resolved or are recurring.
Again today as I go to copy files (images) from Adobe Camera Raw, to say a Tiff or a Jpeg, it appears to begin to copy as normal, then suddenly a box appears with all my copying
file name/numbers, and it begins to eliminate one by one "Cannot Create File", failing the entire process to copy. I have never seen this until I began using Creative Cloud about a
month ago.
Can anyone help this Saturday evening as i am trying to complete a large project of images for others who expect them soon.?
Thank you and I look forward to any advice soon,
Mark Seibold, Artist-Astronomer, Portland Oregon

Hi Rick
Thanks for clarifying that. Yes, that term was my mistake, as I meant to write 'Save As"
Another forum respondent just replied also, and he states as so many others do, that they do not use
the Adobe Camera Raw app formerly with CS6, as they instead use Lightroom, so he apologized that he
was not familiar with ACR but that I might have an old CS6 plug-in running that may not be completely
compatible with the new Creative Cloud. I am not sure if this is the problem.
What I would find as not really likely, is that the Creative Cloud engineers would go through all the trouble
to redesign from the old CS6, then even assist us over the phone to help install it, but in oversight,
leave us without a proper update to properly run Adobe Camera Raw. I also have never really understood the advantage of Lightroom. I'm sure that many must enjoy its efficiency, as I hear wedding photographers like it for huge batch processing of adjusting many images in synchronicity all at once. I would say that I do the same with ACR accessing it through Bridge, and I like ACR's quick and simple access for simple image adjustments and then say a small batch all synchronized, then finally to "Save As" for all selected to a final output as Tiff or Jpeg.
As an astronomer that has just started learning to use Registax for night sky images, we also like the ACR adjustments and then to "Save As" eg. all Jpeg or all Tiff, to then photo-stitch large landscape and night sky panoramas with Microsoft ICE photo-stitching.
Sorry for the long description here, but I hope to relate the total idea of what I am doing for the past years. I'll even attach an example >
Thanks for your possible solution to my problem in "Saving As" in ACR,
Mark

Short cut for copying a cd or dvd data disk?

Is there a keyboard shortcut for copying a data disk, CD or DVD?
I know I can create a folder, then copy all the data off a CD or DVD into
that folder and effectively get the same thing, but I was wondering if
there was a one keyboard keyboard shortcut.
When you do right click and copy of a data disk, what you get is just
an alias to the disk, not a copy.
Thanks.

Mount the CD/DVD/disk Image, OPTION-click on the disk icon at the top of the window that opens, and drag to the Desktop or another Finder window. That should create a folder containing everything whatever you mounted.

Broken/missing images when copying from one project to another.

Greetings:
I've been building pages in RH project #1 by copying and
pasting text and images from a separate RH project #2. While
working in RH #1 all the images are there. When I publish, half of
them are not.
Doesn't RH automatically add copied and pasted files to the
project into which they are pasted?
If not, how do I get these images into the project so they
get published? It tried pasting them all into the FlashHelp folder,
where the other published files are, but this has had no effect.
More, I have to use this technique again and again (long
story ;-) so I really need to get this solved.
Thanks.
stevenjs

Just to get some clarification--you're saying that the
problem appears when you are generating your output from project
#2? Or just when you publish after generating from project #2?
My guess would be that you're copying the code for the image
but not the image itself. Try this:
1. Copy the entire folder of images from project #1 into the
project #2 directory.
2. Do your copying and pasting from project #1 into #2 like
you've been doing.
3. Generate from project #2 and see if the images show up in
the output.
I know you say you have reasons for copying and pasting, but
I just want to mention the possibility of importing topics instead,
which will copy everything over into project #2. But you've
probably already thought about that.
--Ben

Disk Utility - Scan Image for Restore - Freeze

I backed up my wife's iBook by starting her computer in target disk to my iBook which has a huge external attached. After about an hour, the image process was complete. Apple disk utility help says next to scan image for restore (not too sure why because I'm not restoring anything unless her drive dies). I begin the scan image for restore and get the progress bar that never shows and progress. Just keeps spinning/scanning for hours and I have no option to shut if off. Can't move external to trash because it in use, etc.
Does this mean the original disk image may be bad? Do over?
I'm using Disk Image as a solution for a total disk backup if a drive fails. No messing around with reconfiguring apps, etc. (i.e. plug and play) Is this the best way to do this?
I come from the Mac Plus days. Hopefully I can contribute to the new OS discussions at some point. Thank you much!

What format is the external drive?
Is it Firewire or USB?
Does the external drive have one of those front button touch things, like a My Book?
I'm using Disk Image as a solution for a total disk backup if a drive fails. No messing around with reconfiguring apps, etc. (i.e. plug and play) Is this the best way to do this?
I prefer a Clone myself.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Have a look at Synchronize! Pro X 6.0.5
http://www.macupdate.com/info.php/id/6897/synchronize!-pro-x
Or the most expensive one & my favorite, ...
http://www.tri-edre.com/english/tribackup.html
Does this mean the original disk image may be bad? Do over?
It can take quite awhile, and the progress bar isn't accurate at all, but it sounds like something is wrong.

Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
"unable to scan filename " (internal error)
thanks

Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again

Selecting Multiple Images to Copy - Fragmented Image

Hello!
I made a pdf out of a powerpoint presentation on a friend's windows computer. I am now trying to extract an image that I lost while editing on my computer. The problem I have run into is that the image was fragmented into multiple pieces in the PDF (1 image is now 3 parts). I cannot seem to select all of the images and do "copy images" as you can with one part.
I can select all the pieces with the touchup object tool and edit them in illustrator and then manipulate them but this is very much the long way around.
Since I have to do this with many graphics, I am trying not to take the long route. Is there a way to select multiple images and copy them? Or is there a way to select everything with the touchup object tool and just copy it to the clipboard?
Any thoughts?
-Mike

I am also running into this issue. I happens in PDFs coming from all programs that our clients use to produce the PDFs. InDesign, Publisher, Word, WordPerfect.
My question is: back in CS3 days, I could select all the images (one image that broke into any number of horizontal sections) with the TouchUp tool and select>edit objects...They would all open as one image in photoshop, I could do my edits, save and then replace what I had on the PDF with the new saved file (jpg or pdf or tiff).
We upgraded to CS5 and now I can't do that anymore. I go into my PDF, select all parts of the image and then edit, but only the first part I selected is editable. I would like to say that it's a CS5 issue, but we had one machine, back when we all had CS3, that would do the same (not edit all the parts as one). I'm thinking it's some sort of preference or combination of preferences in both Acrobat and Photoshop, but I can't figure it out.
I know one runaround is the "Snapshot Tool," but it was much better before when we could edit what we needed and that's it.
Thank you for your attention,
Leonardo Pedreros
P.S.: Please don't judge me about Illustrator VS. Photoshop...they REFUSE to give us Illustrator at work, for some reason ($$$). If only they knew the amount of time and file size that Illustrator saves, they'd invest in 5 measly licenses.

Enlarge/Reduce image for copying on HPC309A

Similar Messages

Maybe you are looking for