Enter a Numaric Value

while entering tds surcharge rate 0.2 at
Define withholing tax codes display the error
"Enter a Numaric value"
what can i do for it

try 0,2...
i have given rates in normal decimals and its working...
Assign points if useful.
Rajanikanth

Similar Messages

  • How to enter a date value in a Temporary Table

    Hi!
    Could anyone explain to me how I can enter a date value (say 26 October 2011) in a Temporary Table?
    I tried the simple example below, but it gives the foll. error message:
    Conversion failed when converting date and/or time from character string
    CREATE TABLE Temp1
    Column_A date,
    Column_B varchar(max)
    Insert into Temp1
    values ('26.10.2011', 'bbb')
    Thanks
    Leon Lai

    Hi,
    Try This.....
    CREATE TABLE Temp1
    Column_A datetime,
    Column_B varchar(max)
    Insert into Temp1
    values ('10/26/2011', 'bbb')
    Thanks
    Shafi

  • Encountering Error in webadi : "&Value is invalid. Enter a valid value for the Mapping column &Column"

    We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
    The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
    There are multiple records with same Employee name but different Person ID.
    If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
    "Enter a valid EMPLOYEE_NAME.
    XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
    The Query for the LOV is correct and is returning correct records.
    Any pointers on this issue highly appreciated.

    Hi,
    The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
    Thanks.

  • Error message - BSEG-WRBTR enter a numeric value

    Hi,
    I am having a problem with loading data using a abap program that calls RFBIBL00 program and the fb01 Transaction. The process is that the user enters the data in a excel sheet, saves as a tab deliminted txt file. The abap program reads the txt file, does some processing and submits the RFBIBL00 program with the FB01 code. When I check in SM35, it shows on the "incorrect " tab. When you display the log for the process, It is displaying "Formatting error in the field BSEG-WRBTR; see next message" and "Enter a numeric value".  I am not sure where to start looking to try to correct this problem. I am tracing the abap program that submits the RFBIBL00 process and I am not finding where this is occuring. I am new to the ABAP world and I am having a hard time figuring this out. Can someone please let me know if I am proceeding in the right direction or if there is another way of solving this. I am not sure what program is generating the above error messages. If there is more information that is needed, please let me know and I will try to get it for you.
    thanks in advance for the help on this

    Hi,
    There may be two possiblities for this issue.
    1. Incorrect data passed to the field BSEG-WRBTR
    2. Check the Decemial Notation(Menu Path->System->status->Own profile and Defaults Tab). If it is diffrent with the entered amount format, then it will trigger error.
    YOu can run the Bach in the fouground by  choosing fouground radio button option in the Pop up.
    Thanks,
    Ramakrishna

  • How to restrict the user to enter only numeric values in a input field

    How to restrict the user to enter only numeric values in a input field.
    For example,
    i have an input field in that i would like to enter
    only numeric values. no special characters,alphabets .
    reply ASAP

    Hi Venuthurupalli,
    As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
    On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
    The attribute which you are binding to value property ;make its type as simple type which you made
    Hope this helps you
    Regards
    Rohit

  • Enter a valid value error

    Hi,
    Can anyone pls. help us figure out the problem with the newly created business partner master records?  We get an "Enter a valid value" error message when the agent (user) tries to confirm the business partner in CIC.  The user got the same error after she created another bp master record.
    I created a third bp master record for the same customer but in another application server.  I didn't get an error so I asked the agent to use this bp master record instead of the first 2.  Unfortunately, the user got the abovementioned error again after editing the bp master record that I created in the original application server. 
    Hope you can help us.
    Thanks in advance,
    Theresa

    Perform theses steps
    - In LSMW read and convert only one entry from file
    - go to SM35 -> select your session with that one entry
    - select process , option process/foreground
    - choose process
    You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
    Regards
    Marcin

  • Add user-entered "Fill-In" values for "Choice" column to the list of available choices?

    I have a "Choice" column in SharePoint where users need to select a name for a specific engagement when uploading a document.  Since new engagements come up all the time, they need to be able to enter a new value and have that value available
    to select as a Choice from the list the next time they upload a document.  Is this possible in SharePoint?
    Our organization does not allow custom code using Visual Studio, but I do have access to SharePoint Designer. 

    Hello!
    All available choices are specified in the list's schema. I.e. the "Choice" column is designed to operate with predefined values that are set in the schema. Of course, you can every time add a new choice to the list's schema programmatically, but that's a worst
    practice.
    In your case I suggest to add a list (kind of dictionary) containing all values available to pick out. Then, instead of "Choice" column, use "Lookup" column which points to the dicitionary-list. Once a new value is entered, add a new list item to the dictionary.
    Next time this value will be available to pick out.
    .Net Follower (http://dotnetfollower.com)

  • Error in MDDataSetBW.GetCellData.Please enter a valid value for character

    Hi All,
    We have a mandotory prompt on 0FISCPER for Web I Report . The promt is present in the universe.
    The query works fine in Dev , but in Quality it shows the following error
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  Please enter a valid value for characteristic 0FISCPER.. (WIS 10901)
    The universe is on BW Query and the BW Query works fine.
    Can someone please help on this

    Thanks Sathish for your input.
    We have created report level prompts and facing this issue because  we were selecting multiple values for prompts.
    Its working fine for single selection. Is there any way to  enable multi selection for the particular object at the BW end ?
    Or else we have to create the prompts (Single selection) at the universe level.
    Regards,
    Pranay

  • Error in VA01: Message 00002 'Enter a valid value'

    Hello Experts! When I try creating a sales order in VA01 after entering the order type and other mandatory information, I get the error message (no. 002 of class 00) saying 'Enter a valid value'. When I searched other threads in SCN with the same message, I found that this is probably because of authorizations or incorrect values in user parameters. I executed SU53 immediately after the message was issued and found that the check was successful. I even checked the profile parameters for my user ID and everything seems perfect. In fact, I was able to create sales orders until two days earlier and no user settings were changed since then. I tried creating orders from other user IDs and the same message is issued.

    after entering the order type and other mandatory
        information,  I get the error message
    If possible, share here after entering which mandatory field, system was throwing this pop up error.
    G. Lakshmipathi

  • Error "enter a numeric value"  I am not getting this error when i directly

    We are using BAPI "BAPI_ROUTING_CREATE". I am using an excel file for input. I am getting errors against Standard Values and Unit of measure of Standard Values while running the BAPI through an ABAP program.
    The errors are:
    1. enter a numeric value
    2. Enter a unit of dimension time for standard value
    I am not getting this error when i directly run BAPI_ROUTING_CREATE through SE37.
    Kindly help

    Hi, I had the same problem. Solution for me:
    OPERATION-ACTIVITY = <T>-ACTIVITY.   " activity for example "5"  ---> problem error "Enter a numeric value"
    OPERATION-ACTIVITY = <T>-ACTIVITY.   " activity for example "0005"  ---> no problem --> include leading 0
    so I chanded <t>-activity field type to N(4) and no problem...
    Bye, B.

  • Input template enter a Year value and spread values out across

    my templte is as follows:
    GL codes down the right ( Got that)
    Company codes across the top (got that)
    what I want to happen in the ensend - is the values being entered to be divided by 12 and sent to each month. basically the guy is going to enter a Year value and i want that value spread out across the year and accosciated with the correct company code. i cant get it to work.
    Any ideas?

    If you have a spreadsheet and will be using ONLY Accounts on ROWS, and then assuming each COLUMN is a COMPANY code and Value for 1 12 month period, I would use Script logic for this process.
    THe idea would be to send the 12 months to a datasrc intersection called 12MOALLOC, so that you store the original value and may always evaluate it or change it going forward, and send the value to a time meber such as 2010.INP, or Total entry time.  I would use an EVDRE structure, to simplify the sheet.  In the Script logic, I would define that when you see the datasrc and the year, using a property or direct variables, divide it by 12 and place in each of these 12 statements for each month or using a IF loop in the script.  There are examples in the HELP that should give you some assisatnce to building this process out.
    Hope this helps.

  • Error: please enter the date value in correct format DD-MON-RRRR

    Hi all,
    First of all I am 100 % learning oracle financial no technical background. I am trying to run a report: -the calendar does not appear in order for me to choose the date -Besides that when I enter the date ie 10-09-2010 or 10/09/2010 the system give me this error "Error: please enter the date value in correct format DD-MON-RRRR "
    please help me solve that.
    Thanks

    please enter date in 12-Oct-2010 format.
    regards,
    http://www.oraerp.com

  • Error in LSMW : Enter a Valid Value

    Dear All,
    I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
    I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
    I am selecting 14 Views in a single LSMW.
    Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
    Can anybody tell me why I am getting that error.
    Thanks in Advance.
    Tulasi

    Perform theses steps
    - In LSMW read and convert only one entry from file
    - go to SM35 -> select your session with that one entry
    - select process , option process/foreground
    - choose process
    You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
    Regards
    Marcin

  • ESS, Bank Service, and Entering a Deposit Value

    Hello Everyone,
    We are in the process of implementing ESS and I have noticed that the option to enter a deposit value is not shown with any subtypes (other than subtype 1).  Does anyone know how to get the field 'Deposit Value' to show on the screen?  Is there a config table or something that enables a value to be entered while editing bank details?  This of course is quite important to us because our employees will need to be able to change amounts they have going to additional banks (other than main bank).
    Thanks,
    Scott

    Scott,
    Its sctually in webdynpro which is causing this....this is because in the deposit value field has 'isvisible' set for the visible property ...and at runtime the code in the wddomodifyview() method it checks for the Subtype as:
    try{
              if ( subtype.startsWith("1") )
                   wdContext.currentContextElement().setIsVisible(WDVisibility.VISIBLE );
               else
                   wdContext.currentContextElement().setIsVisible(WDVisibility.NONE);
        }catch (Exception ex){   }     
    So if you set the visible property as 'visible' in webdynpro it should solve your problem......or if you want to make it visible for some subtypes you can add code and check for Subtypes and accordingly make it visible or not....
    Shikhil
    Edited by: Shikhil Arora on Oct 16, 2008 2:54 PM

  • How to enter the currency value Flex mobile

    Hi, friends, I type from Brazil
    how to enter the currency value in textinput
    format BR ( Brazil )?:
    Thank's

    Hello Ashok,
             Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
    Hope it helps.
    Thanks,
    Sriram S

Maybe you are looking for

  • Archive Delete job taking too much time - STXH Sequential Read

    Hello, We have been running Archive sessions in our production system in last couple of months. We use SARA and selecting the appropriate variants for WRITE, DELETE and STORAGE options. Currently we use the Archive object FI_DOCUMNT and the write job

  • Validation question

    Here is my JSP code <h:dataTable value="#{manageAssetMB.currbean.allAttrAssociations}" var="currAttrAssoc" > <h:column> <h:outputText id="input" value="#{currAttrAssoc.attr.name}" /> <h:outputText value="*" rendered="#{currAttrAssoc.mandatory}" /> </

  • Significance of sync key for a Sync Bo

    Hi, What is meant by the sync Key in MI Client application. How is it used to identify a particular sync BO instance. Is it the same as that of the key field selected in the syncbo mapping. If the syncbo has multiple key fields what would be the sync

  • Querying data across different cache-clusters

    Hi, Say there are multiple clusters each containing DIFFERENT sets of cached data. I would like to know if someone knows how an application from within one cluster can read/query the data from the DIFFERENT clusters "DIRECTLY". Would we need to code

  • About Container Category in Integration Process (BPM)

    Hi Friends Can any one  explain me abut Process container variable ReceiverList which is defined as a type "Receiver" and How to use in Integration Process With Examples Message was edited by:         Viswanadh Vadde