Entry EN 40 does not exist - check your entry

Dear Friends
I'm facing a Issue in MSS where when manager is trying to view the employee Trip details in UWL. I'm getting a error as "Entry EN 40 Does not Exist - Check your Entry" I've checked the Table V_T702X & there I can view the Trip Types which I've created for Trip Provision variant 40.
V_T702X:
Kindly let me know what else I'm missing as this is very urgent & it need to be resolved ASAP.
Cheers
Pradyp

Hi Ankur
Thanks for the quick reply,
I've checked the Table PTRV_HEAD, and below is the data I've found in that.
Kindly let me know what else need to be checked.
Cheers
Pradyp

Similar Messages

Storage bin 320 902 does not exist (check your entry)

Storage bin 320 902 does not exist (check your entry)
Message no. L9009
I have created the new bins in the interim storage area 902. In the table LPAG also the storage bins are visible. I am creating thre GR for the PO in the system but still getting the error in as above . Please help me out.

Hi
check the movement type configuration which is used. So u can find what storage bin is used for the particular movement type.
If not existed create the interimbin.
Hope this helps you...
Rgds,
Kris.

Storage bin ZZ1 998 AUFNAHME does not exist (check your entry)

While in MIGO transaction, trying to post goods receipt with movement type 561, the system gives the error :
Storage bin ZZ1 998 AUFNAHME does not exist (check your entry)
How can I fix this error ?

I had the exact same error yesterday, still I haven't figure it out yet.
I can add that you must have that storage location connected with WM, and there's something wrong in this integration.
Cherrs.

MB1C Error "Storage Bin 450 does not exist Check your entry"

When doing MB1C error message says
:"Storage Bin 450 does not exist Check your entry"
I have maintained all movement types, storage location well. I have not created any storage Bin then why it is asking for this?
Please help for solution with steps.

Thanks for your answer. My problem is different but I resolved it myself as under:
Log Execution->Shipping>Picking>Lean WM-->Define control parameter and no. Range....All three tabs were set.Here in check box I tick mark as Active Lean WM.
Then went to Control Plant /Storage location/Warehouse No Assignment
Here Plant/Storage Location/Warehouse were given
Degree of activation=1
store tye for picking in LWM=005
So Lean WM was activated. So in MB1c this error was disappeared as I had activated Lean WM.
But another error came "There is no item category assigned to account 799999/4050" This is related to field status group in G/L account but still not solved.I am missing Commitment Item in tab Create/Bank/Interest in my G/L account. I tried to run program RM07CUFA in SE 38 saying error No MM group in 3 tabs but could not further identified.
Above issue was resolved sothread is closed.

Storage bin 999   does not exist (check your entry)

Hi Gurus,
In Lean Warehouse Management,
When I tried to post the stock in MB1C, using movement type 561 it is giving the following message.
Storage bin 999   does not exist (check your entry)
Message no. L9009
Will some body try to help me out.
Thanks&Regards
Srikanth

Hi Gurus,
This errror is also coming during the stock posting using MB1C(561 movement type)
Error during search for WM movement type (561     )
Message no. L9005
Please let meknow ASAP.
Thanks & Regards
Srikanth

Organizational unit 00000000 does not exist; check entries

Hi Experts,
While creating the business partner in transaction BBPMAININT the error is
Organizational unit 00000000 does not exist; check entries
where do i have to make entry of the organisation unit
, already i have entered the purchase organisation.
Thanks

Hello,
Can anyone Explain me How can i Create Vendor EBP using T Code ppoma_bbp.
I am using Tcode bbpgetvd for for Replicating Vendor Master to mySRM System and it is Having field of
Organuzational Object for Suppliers
Object ID ______
I have given Object id which is in assigned is ppoma_bbp (Organizational Structure).
I have Tried to assign Object ID of Organizational unit which is assign with Purchasing Org. and Purchasing Grp.
Please Help Me anybody.
Thanks in Advance.

In MVT 545 Check table XEKPO: entry 00000 0000   does not exist

Hello
While using the mvt type 545 with MB1C (Included in mvt)
I am getting the following error what could be the possible reason
Check table XEKPO: entry 00000 0000   does not exist
    Message no. M7001
Diagnosis
    In table XEKPO the entry 00000 0000   is missing.
Regards
Niti Narayan Chaturvedi

This is a authomatic mvt, But I am using a manual route to excecute, is this causing problem
Where is the check for the automatic mvt
Niti Narayan

TimeZone.getDefault().getID() does not exist in your Oracle database table V$TIMEZONE_NAMES???

Hi Everyone,
My Jdev version is 11.1.2.3.0.
I have developed many ADF applications in this version itself by setting time zone as -Duser.timezone="+05:30" and all were running fine.
But Jdeveloper got crashed so i reinstalled the same version but now none of the applications are running.
Its showing error as below:
oracle.jbo.JboException: JBO-29112: The time zone 'GMT+05:30' defined in adf-config.xml or TimeZone.getDefault().getID() does not exist in your Oracle database table V$TIMEZONE_NAMES. Please set an available time zone in your TZ environment variable or user.timezone Java system property.
What to do now?
how will i know wat time zone should be set?
please help the needful...
Thanks.

Check if www.jobinesh.com/2010/12/why-do-i-get-oraclejbojboexception-jbo.html helps.
Timo

" Unit of measure ****** is not defined; check your entry in table T006

I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.

I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.
Hi Itzell T,
      While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
      So, functional consultant should take care of this issue just let him know the message.
   He know what problem actually is and fix the problem as Ankur had said.

Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

Hi All,
Iam getting error message while creating intercompany sto PO in my QA clinet.
(Customer PC3000 does not exist (please change entry in plant 3000)
Vendor maintained both the plant(supply and receeving plant)
Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
I had checked OMGN t-code setting looks good.
Same setting I had tested on DEV and SANDBOX its wokring fine.
Please help me out how to solve this problem
Thanks
Raj K

Hi,
I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
Regards,
Onkar

Special Stock E not supported (check your entry) error in returns delivery

Dear friends,
While we are doing the returns delivery, we are getting the error " Special Stock E not supported (check your entry)
Message no. M7146
Diagnosis
The specified objekt (Special Stock E) is not supported."
This is an M.T.O scenario
In the returns order the requirement type is 'KE"
can u pls tell me how the requirement type is determined at sales order level. Can it be changed manually.
How the strategy group is linked to requirement type.

Hi,
Requirement type KE you can not changed manually.
For a strategy two requirement types are linked. One is from PIR requirement type,another one is from customer requirement type.
For 20 strategy, customer requirement type is KE.
For more detais Goto SPRO>Production>Production planning>Demand management>Planned ind req>Planning strategy>Define planning strategy.
Here you can find the link between requirement type to a strategy.
Regards,
Dharma

Special Stock E not supported (check your entry) Message no.

Hi,
While we are doing the returns delivery, we are getting the error "
Special Stock E not supported (check your entry)
Message no. M7146
Diagnosis
The specified objekt (Special Stock E) is not supported."
This is an M.T.O scenario
In the returns order the requirement type is 'KE"
The item category is REN
Schedule line category is DN
movement type is 651
Kindly guide how to over come this issue.
Warm Regards
Somnath
09903518371

Dear somnath
For information, in returns scenario, special stock indicator E will not support. The logic behind this is that while taking back the goods into plant, you should not assign those stocks to original sale order. Either you have to post the stock for Quality or to some new storage location.
thanks
G. Lakshmipathi

Entry SE01 1890 does not exists in T005G(Table)

Hi,
We are getting Bdoc error "Entry SE01 1890 does not exists in T005G(Table)" in CRM system.We are using CRM 7 and ECC 6.
Please help me in resolving this issue.
Thanks,
Rahul

Hi,
Thanks for the reply.
We are getting this error in BDOC monitoring.Similarly we haev more errors related to same error like" Entry SE01 1880 does not exists in T005G(Table)".
.Actually when i check this table city code 1880 is mentioned under region 18 in the country key SE.
Please help me

SocialListNotFound : The Social list does not exist in your personal site.

In SharePoint 2013; when a person try to follow a document which is located the SkyDrive Pro of another person it pop up erros message shows as below.
Something went wrong
Sorry, we couldn't follow the document.
TECHNICAL DETAILS
SocialListNotFound : The Social list does not exist in your personal site.
Can anyone help on this...

Hello all,
I have the exact same issue.
When a user tries to follow some document or site, the same error occurs. When I look at the personal site of the user, the "Social" list is missing.
When I have another user do the same thing, it works! The Social list for that user is there.
The difference between the 2 users:
The user where the issue occurs => mysite has been upgraded from SharePoint 2010
The user where the issue doesn't occur => mysite has been created after the upgrade to SharePoint 2013.
So, I tried to delete the mysite of the user who had the issue and let him recreate it by visiting the MySite host and now it works!
The thing is... I have 100 users having the same issue and a lot of them are actually using their mysite, so deleting those mysites is not really an option.
I have 2 questions:
1. why is that "Social" list not created when mysites are upgraded from SharePoint 2010?
2. Can I trigger some process which fixes this for existing sites?
Thanks,
Bart

Error - Account group does not exist, check classification assignment

Hi Guys,
I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
Bdoc Error - Account group does not exist, check classification assignment
i have completed all the required configuration as below
Setup of no range for BP and assigned to grouping
PIDE settings in R3
Setup if account identification profile in IS solutions
Thanks,
Nitin

Nitin,
Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

Entry EN 40 does not exist - check your entry

Similar Messages

Maybe you are looking for