Entry for condition type missing in table PRCC_COND_CT

Hi guys,
I got this error message in my BDoc.
It ask me to
"Fill the table PRCC_COND_CT bu using a Customizing download, and then restart the rolled back block in the inbound queue."
I am not too sure what is a customizing download.
Can you guys help me out?
Cheers
Lawrence

Hi,
Firstly please apply the note 1003793 and then run the customizing load again and check for errors.
then if you get any errors like
"It is not possible to change client-independent Customizing objects Message no. CND_MAP204                                                  "
Then log into SCC4 transaction and then make the following change
"changes to repository and cross-client customizing allowed" under Cross-Client Object Changes.
Thanks,
Abishek

Similar Messages

  • Provision account key missing for condition type FRA1 in schema ZIMPOR

    Hi,
    While maintaining the condition value in PO, the below message displayed.
    "Provision account key missing for condition type FRA1 in schema ZIMPOR"
    Thanks and regards
    Murugesan

    Go to
    Spro>MM>Pur>Conditions>Define Price Determination Process>Define Calculation Schema
    here select ZIMP and click control data
    in that maintain "Account key" for FRA1 cond type in the Account key Column..
    (Second column from right side)

  • Provision account key missing for condition type ZPFV in schema ZUELOC

    Hi
    We have defined the condition type ZPFV for freight value & mentioning the same while creating po and in past we had prepared so many po by using this.
    we hv not change any thing & today we are getting message " Provision account key missing for condition type ZPFV in schema ZUELOC"
    What to do???????
    Thanks
    Ketan Vala

    hi..
    If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
    Go to your contion type ZPFV and check whether you have checked Accrual or not..
    then go to ur pricing procedure ZUELOC and check the last two colums for your condito type i.e. Account Key and Accrual Key.
    Maintain these..
    try this if it works.
    Thanks...

  • Provision account key missing for condition type FRB1 in schema

    Provision account key missing for condition type FRB1 in schema is the error coming while i enter freight value at PO
    how to set this
    krishna

    Hi Krishna,
       Go to Pricing procedure using M/08 , here against the Freight condition type ( FB1), enter the accrual key ( ex. FRE)and account key ( ex. FR1 or FR2).
    After saving to the customizing request, again create the PO.
    Thanks & Regards,
    Amjad

  • Defining the Fields for Manual Entries in Conditions Type

    Dear Team,
                      I want to define new fields in the Option Manual Entries in Condition Type eg PR00 . Can you tell me the Setting where do we define those settings and where are they control.
    Thanks,
    Prashant

    Hi
    The option provided for Manual Conditios are Hard Coded by the SAP, and you can not add any new option. If you want to check, pl. check the value range of Domain KMANU, where it is maintained.
    What is your requirement? May be you can fulfill your requirement by some other mean, like USER EXIT.
    Regards
    AA

  • Table containing validity periods for condition types in me12 transaction

    Hi .,
          i need the name of the table which contains the Validity Start and Validity End dates for Condition type 'PB00' IN ME12 transaction .. kindly help me..
    Regards.,
    S.Sivakumar

    hi,
    we hav data in A018.
    130     M     PB00     10011     30000102     XXXX     0     31.12.9999     03.09.2004     0000007715
    130     M     PB00     10061     20000822     XXXX     0     31.12.9999     08.10.2006     0000011194
    130     M     PB00     10061     30000436     XXXX     0     31.12.9999     21.01.2005     0000009793
    130     M     PB00     10061     30000437     XXXX     0     31.12.9999     21.01.2005     0000009792
    130     M     PB00     10065     80000414     XXXX     0     31.12.9999     30.07.2004     0000007487
    130     M     PB00     10269     10004972     XXXX     0     31.12.9999     20.01.2007     0000011237
    130     M     PB00     10482     30000129     XXXX     0     31.12.9999     16.07.2004     0000006911
    130     M     PB00     18091     30001906     XXXX     0     31.12.9999     06.05.2006     0000011061
    130     M     PB00     18091     30001912     XXXX     0     31.12.9999     06.05.2006     0000011059
    130     M     PB00     18091     30001913     XXXX     0     31.12.9999     06.05.2006     0000011060

  • Some Condition types missing during extraction from 2LIS_11_VAKON

    Hi,
    I am extracting conditions data to BI from ECC through 2LIS_11_VAKON. This datasource uses the fields from table KOMV. The Field KSCHL (Condition type) is also being taken from KOMV structure.
    My problem is some condition types are missing during extraction. Say, for example, for a Document condition i have 22 Condition types in KONV table but when i extract the data to BI, nearly 7 conditions are missing, i am getting only 15 condition types for the same document condition in BI.
    Why is this happening? I dont have any filters set. Moreover, this is happening in the Datasource level itself.
    Please advice. Any help on this is highly appreciated.
    Regards,
    Murali

    Hi Murali,
    try to have the manual check with set of data..there must be some mistaken in And and OR logic.
    Thanks,
    Deepak

  • The entry FBZ4 S  is missing in table T021V

    HI
    I am doing the service tax thorugh f-58 , there i am geeting this error.
    The entry FBZ4 S  is missing in table T021V.

    Hi,
    I think you have not maintained the t. code for payment.
    Go to SM30. Enter the table name V_T021V. Click on Change button. Maintain the entries for FBZ4, Account Type S.
    I hope this will solve your problem.
    Regards,
    Jigar

  • Restriction for condition type

    Hi,
    I want to restrict some users to do not change the basic price (PR00) in sale order (VA01/VA02), Plz let me know how I can do this.
    regards,
    sps.

    The objects concerned have to be:
    V_KOND_VEA Maintain condition: Auth. for use/appl./cond.type/table -- (Deals with condition records)
    V_KONH_VKO Condition: Authorization for Sales Organizations
    V_KONH_VKS Condition: Authorization for Condition Types
    But in the standard system VA02 has these objects set to No check in SU24. You may have to modify this to Check/maintain and then maintain the values in the users role. Like you can have:
    Object : V_KONH_VKS Condition: Authorization for Condition Types
    Condition Type: PR00
    Actvt : 03
    Thanks & Regards
    JP

  • MWST condition type missing in contract creation,VA41

    Hi, got a problem here during contract creation. I can't get the MWST show up in the contract condition tab. Analysis result :
    010 Access not made (requirement not fulfilled)
    Error Message : Pricing error: Mandatory condition MWST is missing
    Things I have done :
    a) checked pricing procedure V/08
    b) created condition records VK11
    c) checked customer tax classification : Liable for taxes
    d) checked material tax data : Full tax
    e) ???
    what else did I miss out?
    Thanks
    Andy

    Option 1: If you do not want MWST condition as mandatory, then remove the check from check box in the pricing procedure (T.Code: V/08). MWST is tax condition & Tax condition are normally not mandatory, as it may vary according to Business Requirement.
    Option 2: <b>"010 Access not made (requirement not fulfilled)"</b>: Check the access sequence maintained for Condition Type MWST (T.Code": V/06). Next, Check the Access Sequence & the access 010 assigned to it. (T.Code:V/07). Check whether Accesses & fields are assigned correctly.
    Option 3: Instead of maintaining condition record for access 010, maintain for different combination & check the result. Even in my case, once the access with reference to tax classification did not give desired result, but was achieved bu maintaining another combination.
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Open Enrollment - No entry for form type B2

    Hello,
    I havea problem in open enrollment, when we save after the review, error -No entry for form type B2 is occured.
    I haveperformed all the necassary steps as below.
    1) Created new package and copy HR_BEN_ENRO and HR_BEN_CONF from 000 to current client as Z forms
    2) Activated the form.
    3) Assigned the above modified the templates in SPRO.
    I even see the new entries in table T74Hl
    Let me know what is wrong
    John

    Nice work, Tim. I hit that problem before long ago, but did not get change to reply....heck, I would have to dig through my notes to even find the fix again! haha Thanks for posting it up and helping out.
    edit: hahaha Found an old post I did in the HR forum for this a good while back. =)
    What is Form type B2

  • Customization for S100 j_1iindcus missing in table

    Dear All,
    When iam posting a transcation in FB60,iam getting an error and is as follows
    Customization for S100 j_1iindcus missing in table
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Manu

    Hi,
    Go to SM30. Enter the Table Name j_1iindcus and click on Maintain. Please enter the setting for the company code S100.
    Enter Document Type, First Month and all necessary required parameters as per your requirement.
    Alternative way to go for customization is
    IMG > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Company Code Settings
    Regards,
    Jigar

  • Restrict Double entry of condition type

    Hi All,
    How to control double entry of condition type at Item & header level in sales order????....any solution
    Thanks & best regards
    Umed

    Condition type settings V/06, Changes which can be made section maintain B- Automatic entry has priority , if condition record exist then system will not accept to enter manually.(If yours is autoamatic condition type.)
    If your condition type is manual and if you maintain 'C' - Manual entries has been priority or Blank - No lomitations, then i think we can not stop this.
    Regards,
    Ramesh

  • Unable to manually change the amount for condition type PB00

    Hi Gurus,
    My client is using ECC5.0.
    Here when I try to change the amount for condition type PB00 using transaction ME22N, I am not able to change the value. I donu2019t get any error, but as soon as I change the value and press Enter the system replaces my entered value with the original value.
    Confusing part is that I am able to change the amount of condition price PB00 manually using transaction ME22. I donu2019t have any such problems there.
    Also I am able to manually change the amount of condition type PBXX using ME22N.
    Only in the case of PB00, if I use ME22N to manually update the amount I am not able to change it.
    Kindly help me, to find a reason as to why this could be happening, and correcting if possible?
    Thanks in advance,
    Imran

    Hello Imram,
    The purpose of maintaining 2 condition types  ie PB00 and PBXX in  a pricing procedure is that PB00 is automatic gross price determination and PBXX is manually giving gross price.
    If you go to T.Code : M/06 and check the condition types, you can see that PB00 will be having an access sequence but not PBXX.
    So if you have to manually give the gross price, you have to use PBXX.
    Regards

  • Requirements not fullfilled for Condition type - Pricing Procedure

    When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

    Hi Sunil,
         Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is,  once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of  ABAP'er regarding this requirement if it is customized requirement.
    We should know the purpose of requirement in condition type.
    Venkat.

Maybe you are looking for