Entry missing in table t78nr

hi ppl,
I have checked all the queries relevant to my question and got an overview idea of how to configure in swu3.But my problem here is iam practising in client 300(test client).I need to enter an unique number in swu3.So i dont want to inform this to my basis consultant.Isit ok if i put 123,or id1 any numbers or alphabets as prefix number.

Hi Priyank,
To maintain prefix number in dev, do the following:
1. Go to transaction SWU3.
2. Expand node Maintain Definition Environment
3. Go to Maintain Prefix numbers and execute it.
4. Make an entry giving a prefix number say 900, SAP system name, client used and Package to store it.
5. Now generate Maintain Prefix numbers.
To transport workflows from dev to test system do the follwoing:
1. Go to t-code SCC1.
2. Select the transport request number and enter the source system as dev system (client)
3. Click on 'Including Request Subtasks.
4. Click on button 'Start immediately'
This would copy the TR from dev to test system.
Hope this helps!
Regards,
Saumya

Similar Messages

Posting thro J1IEX error - DEBIT ENTRY missing in table J_1ITRNACC

Hello,
While posting Cenvat Credit in J1IEX, the system is giving error as "Customization for DEBIT ENTRY missing in table J_1ITRNACC".
- "The customization details have not been maintained for this company".
When checked thro' SPRO>IMG>Logistics-General>Tax on goods movement>India>Account determination>Specify excise accounts per excise transaction', it shows all debit, credit entries for excise transaction type 'GRPO'.
Kindly suggest me what else need to be checked? Part I entry is already done during MIGO.
Thanking in advance.
Regards
Ratna

Dear Velu & Pankaj Singh,
Thanks for your prompt reply.
We already had setting for the following.
GRPO CR Credit CLEAR CENVAT clearing account
GRPO DR Debit ONHOLD CENVAT on hold account
GRPO DR Debit RG23AED RG 23 AED account
GRPO DR Debit RG23AT1 RG 23 AT1 Account
GRPO DR Debit RG23BED RG 23 BED account
GRPO DR Debit RG23ECS RG 23 ECS Account
The above is also maintained for sub trn type 'IP'
But we do not have any entry for SED account i.e. record does not exist for GRPO DR Debit RG23SED RG 23 SED Account.
The excise entries contains BED account, AED account, ECS account and AT1 account as SHE CEss account.
Pl. suggest.
Regards
Ratna

Entry missing in table TMC6 for unit KOEIN

Hi,
The STD Info structure S071 us marked for VA (Sales Order), it does not allows to change as it is SAP STD. I have a scenarios where these tables to be updated for VB (Contract). So i thought of creating a new table copying the existing S071, while i try to Update Rules for the new Info structure, i am getting the below copied error.
I went through some of the links, but those are not giving the right answer. All comments are welcome...thanks
Entry missing in table TMC6 for unit KOEIN:
Message no. M2108
Diagnosis
The system attempts to determine the unit of the source field for field
KAWRT. The data element KOEIN was defined as part of this process.
The system now searches table TMC6 for this data element in order to
define the two-character units ID. However, no appropriate entry could
be found.

Hi,
It says -
Solution
This is corrected in the Support Package for Release 4.70, 5.00, 6.00, 6.02 and 6.03.
We are running on 6.00 , how ever i will go through the Correction Instruction... thanks

Table entries missing in table TJ05

Hi Experts,
I have search in SCN regarding below issue...but i havn't get any solution.
Recently we upgrade to ECC EHP5 from 4.7,
The values "ZIN1" in table "TJ05" is missing in ECC 6.0. This value was available in 4.7 .
How can Z1N1 value insert in the TJ05 table.
above reason the "Non-updation of status in QM notification".(its effecting to Quality module.)
need to be insert values through configuration or through a tcode in SPRO..
i can't use this thru utilities->Table Contents->create entries in se11.
I know that we can forcibly insert values while debugging
if code = 'SHOW'.
set titlebar 'TAB'
elseif code = 'EDIT'.
Please provide valuble suggestion.
Thanks and Regards,
Syfulla

- Check also if records are missing in table TJ03.
- The code start with a "Z" and should have been added by your company/customer (*), so may have been erased by the upgrade (you know/remember the warning message like "Do not make any changes (SAP entry)" ignored by press ENTER
Look at BS* transactions like BS12/BS13 or BS22/BS23.
Regards,
Raymond
(*) Not found on a 4.6c, a 4.70 and an Ecc6 Ehp4 systems..)

F-58 Error - Entry missing in Table T043G

Hi Gurus,
I am trying to post a check payment through F-58. This is a same company code payment. The error of the T043G table entry appears.
When I go to the table, all the relevant entries are maintained.
Please help as to what I am missing here.
Thanks
Sheli

Hi,
Go to T.code : OBA3 Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable>Business Transactions>Outgoing Payments>Manual Incoming Payments>Define Tolerances (Vendors) and create Tolerance Group and save
and go to FK02 and give vendor number ,company code and select payment transactions Check box and enter and give Tolerance Group and save
Thanks,
Raviteja

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

FB70_The entry 001 is missing in table TAB_FSKB

Hi,
    I create a company code, when I use FB70, enter company code、customer number、invoice and posting date, then click enter, a warning message will jump:
The entry 001   is missing in table TAB_FSKB
Message no. F5100
    If I change the company code to other one,everything is ok. So I think maybe something is wrong with the data related to company code.

HI
Plz go to OBY6 and check whether your company code is there are not. I dont think it is there. Even if it is there, see whether you have assigned the Chart of a/cs, fiscal year, document types, document no. ranges, field status grp.etc.
Plz assign points, if its helpful.
Regards
Rajaram

Entry 001 is missing in table tab_fskb

Hi , I get a problem when I use t-code:fb70, the error message is "entry 001 is missing in table tab_fskb" , is tab_fskb a table ? I use se16 to view the table ,but there is no table named tab_fskb. who can give me some solution?
thanks a lot

Dear Victor,
Once you open a particular thread, after that why you don't follow it..?
Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
Yesterday you asked:
What should I pay attention to do a successful client copy ?
I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to.
And when I asked for certain information:
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
You didnt replied and again opening a new thread today
PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
Regards,
Ashutosh

Archiving Object - Entry missing in Customizing table for object Z*********

Hello friends,
We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
"Entry missing in Customizing table for object Z******* "
I have matched my object with few other archiving objects and things looks similar.
Have you faced this kind of problem..
thanks
ashish

Hi,
I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
But when i enter ZSCS_TRAFO, i get this error :
Entry missing in Customizing table for object ZSCS_TRAFO
Message no. BA057
Diagnosis
A function cannot be executed due to a missing table entry.
Procedure
Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
However, a few other Z objects works well.
thanks
ashish

Entry VEHICLE missing in table COM_SE_BUSOBJ

Hi Experts,
I’m facing an issue in SAP VMS (Vehicle Management System). If I click on the “Find” option in VELO transaction then list of vehicles will be displayed but system throwing following error” Entry VEHICLE missing in table COM_SE_BUSOBJ”
Plz help me to solve.
Thanks in advance!
Regards,
Naga

Hi Naga,
You have to maintain business object VEHICLE in customizing table COM_SE_BUSOBJ:
SPRO -> SAP Netweaver -> Application Server -> System administration -> Search engine service -> Define business objects for search engine service
Maintain record:
Business object: VEHICLE
Object type: 1
You have to enter the Index-ID for SES, see F1-help.
Regards
Joachim

Error F5100 - The entry FR 3 A1 is missing in table 021T

Hi all;
We have an error message when log on in French and try to run transaction F-44. After update Vendor Account, Company Code and click on the button "Process Open Itens" the system returns an error message F5100 - "The entry FR 3 A1 is missing in table 021T."
It is only happen when we log in French. Error message in French: "Dans la table 021T, il manque l'entrée FR 3 A1".
Can you help?
Thanks in Advance!
Gustavo

Hi Gustavo
Please refer to instructions in note 75750 to solve the incident.
Cause and prerequisites
Customizing error:
The user usually logs on to the R/3 System in a language other than
English. For the language English, the user has not maintained any line
layout variants under 'Financial accounting editing options: Document
entry' (Transaction: FB00).
Solution
After you have logged on in English, maintain the 'financial accounting
editing option: ...' by means of Transaction FB00.
Maintain the line layout variants for:
- Document entry
- Open items
- Line items
Example:
- 'Open items': Line layout variants
                (for example: A1, A1, A1, Z1, P1 or such like)
- 'Document entry': Line layout variants
                (for example: AA, STD)
- 'Line items': Line layout variants
                (for example: B3, A1)
- 'Payment advice notes': .... (SAP01, A1)
- 'Credit management': .... (ST1, S01).
Hope it helps
Kind Regards
davide

Error: "The entry 1111 is missing in table T043S"

Hello All,
While clearing a G\L account the below error was encountered:
"The entry 1111 is missing in table T043S"
1111 is company code,
However when I look at the table T043S, 1111 is there.
Could help me to figure out what might be the other cause of this error?
Thanks in advance!
Jhero

Hello,
In T043S and T043G (OBA3) you need to create two tolerance limits.
one tolerance limit with some name
second tolerance limit without any name (blank)
If you do not create tolerance limit blank then your tolerance is not going to work.
First create tolerance group blank for your company code, then copy that tolerance and give some name for your company code.
Hope it should solve your issue.
Regards,
Ravi

F-32 the entry is missing in table

Hi ,
When we are performing the transaction F-32, we are getting the below error message
" The entry YYY is missing in table T043G ".
However, I could find the tolerance groups attached to this company code YYY in OBA3.
I have serached the forum and it says to create another entry for company code YYY in T043G and leave the Tolerance group as blank to resolve this issue..
But if i assign the Tolerance group as Blank to this company code, then would the tolerance check be completely removed for this company code ?
How does this work...Any idea on the after affects of this change...
Thanks,
Srikanth.

Hi,
Through a blank tolerance group, we specify the lowest level of payment differences and cash discount allowed for Customer.
this will be applicable for all customers in co. code. For any other set of customer whom we can have less control, we can create a new tol. group with desc and assign the same in master.
Regards,
Gangadhar

The entry ABCD ABCV is missing in table T043G

Hi
I have to clear an open invoice manually using F-53.
This is the error message i m getting
"The entry ABCD ABCV is missing in table T043G" [Here ABCD is the company code]
Please Help!
Thanks!

HI,
please check if Your company code is defined in transaction OBA3
or check the path IMG -> Financial Accounting -> Accounts Receivables and Accounts Payables -> Business Transactions -> Incoming Payments -> Manual Payments -> Define Tolerances (customers)
Go through the customer master and check which tolerance group the customer is assigned to (field' technical name is LFB1-TOGRU.
Regards,
Satish Muvva.

The entry FBZ4 S is missing in table T021V

HI
I am doing the service tax thorugh f-58 , there i am geeting this error.
The entry FBZ4 S is missing in table T021V.

Hi,
I think you have not maintained the t. code for payment.
Go to SM30. Enter the table name V_T021V. Click on Change button. Maintain the entries for FBZ4, Account Type S.
I hope this will solve your problem.
Regards,
Jigar

Entry missing in table t78nr

Similar Messages

Maybe you are looking for