Business  system for idoc reciver communication channel.

hi gurus,
iam doing one file to idoc scenerio.
for defining reciver idoc adapter ,which type of businees system i required that is configured in SLD.
pls guide me .
warm regards.

Hi
You can use th Buiness system as a receiver for IDOC.
Making sure
1. the LS of the system(R/3) is same in the SLD and it is also reflecting in the adapter specific attributes in the ID.
2. Use the same LS name for the BS pointng to FIle in the SLD.
Complete the IDOC configuration from XI
1. Create the RFC dest from XI to ECC
2. Create the Trfc port and call this RFC dest created..
3. Use this Trfc port in the IDOC receiver
On ECC:
Make sure the Partner Profiles is created properly.
it is suggested to use always the business systems when you deal with IDOC and Proxies.
Edited by: Nisar Khan on Feb 27, 2008 1:31 PM

Similar Messages

  • RFC Look Up APIs for a IDOC Receiver Communication Channel

    Hi,
    Can we use RFC Look Up APIs in UDF for a IDOC Receiver Communication Channel. (File to IDOC Scenario). Requirement is to send a notificaiton when IDOC got posted with IDOC number.
    Best Regards,
    Madan Agrawal

    As the name suggests, RFC lookup uses RFC receiver channel only. In mapping of your File to Idoc scenario, you may perform this lookup.
    Requirement is to send a notificaiton when IDOC got posted with IDOC number.
    Configure ALEAudit for this requirement. How were you planning to use RFC lookup for such a requirement?
    Regards,
    Prateek

  • Business System for PI to PI Communication

    Dear All,
    We need to communicate between two PI System and message should be transfer both the side. we don't share PI technical System Details.
    1) whether we can create a Business System as a Third Party type with a Generic technical System which is type 3rd party?
    we already have a option for Business Service but still want to create a Business System.
    Regards,
    Manikandan

    Hi Manikandan,
    I understand the flow as: -  Sender -> PI_1 -> PI_2 -> Receiver OR
    Sender -> PI_2 -> PI_1 -> Receiver.
    I think you can configure Direct Communication between PI_1 -> PI_2, SAP help [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce5bf1a0d7154ee10000000a421937/frameset.htm]. So that, two PI systems use the Web service runtime to communicate with each other directly. Also check, Configuring Business Systems (with Web Service Communication), in above link.
    Regards,
    Raghu_Vamsee

  • Problems in IDOC receiver communication channel

    Hi,
    I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
    Please assist.
    Rgds
    Kishore

    OK in that case, we are getting the following error in the Message monitoring:
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
      <SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
      <SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
      <SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
    Please check and assist.
    Rgds
    Kishore

  • Multiple Business Systems for Multiple Receivers?

    hi,
    idoc > xi -> multiple receivers with xml payload
    I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
    When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
    For this to achieve do we have to create multiple business systems for each receiver?
    If i create a receiver in the business service how can we determine the interface mapping in this scenario?
    Thanks,
    Tirumal

    Hi Tirumal,
    <i>For this to achieve do we have to create multiple business systems for each receiver?</i>
    As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
    Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
    So if you think, your each receiver is of type different type/process then create different Business systems.
    It depends~
    If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
    Hope this helps,
    regards,
    moorthy

  • AS2 Reciver Communication Channel error

    Hi,
    I am doing FILE to AS2 ...
    I configured the Scenatio with  Synchronous MDN , I have Created the Sender for MDN report too..
    beow is my Error At AS2 reciver Communication Channel...
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
    Thanks

    Hi Tom,
    This problem comes in SAP PI 7.1 version for resolving you  require creation of extra configuration objects u2013
    1.  A sender AS2 communication channel with protocol as u201Ereports‟
    2. A sender agreement using above communication channel.
    For more information please refer Article (This will help you in configuring extra objects)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
    Regards,
    Vikrant

  • HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY

    Hi Experts,
    I need generate the service for sender soap communication channel for target url to receive the  inbound proxy.
    my scenario is like SOAP to proxy. while using  receiver proxy also we are planing using AAE method .
    i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
    how to generate the url for this and what is the transaction code .
    Please help us.
    Regards
    Ravinder.S

    Hi Ravinder,
    Q.my scenario is like SOAP to proxy. while using  receiver proxy also we are planing using AAE method.
    SOAP to Poxy in this case.
    For sender  SOAP system, we can generate the WSDL link in ID part.
    for Reveiver proxy give the integration engine URL.
    http://IP:PORT/sap/xi/engine?type=entry
    how to generate the url for this and what is the transaction code
    There is no transaction code for generating the URL.
    i hope this will help.
    Regards,
    Kesava.

  • MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

    Hi Experts,
    How the  MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
    Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
    51 error msg we are getting material does not exists.but the material is available in the receiving plant.
    Please suggest

    If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC  may not match with the material number in your database.
    leading zeros. material number stored as alphanumeris instead of numeric.

  • How To Create A Technical And Business Systems For Web AS ABAP ???

    Hi Experts,
    How To Create A Technical And Business Systems For Web AS ABAP ???
    Please Let me Know All the Step-By-Step Process to Create ????
    Points Will be Given
    Regards
    Khanna

    Hi Sumit,
    When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
    So I got An Entry for the Technical System for XI System.
    Now i Deleted that and Executed RZ70 in R/3.
    When I Executed RZ70, I got this Error.
    <b> "RFC Call failed: Error Opening an RFC Connection "</b>.
    Now I am Unable to see Any Technical System  Under Web As ABAP. It's Showing Empty Now.
    Please Let me know
    Regards
    Khanna

  • Can we define two business system for a Client.

    Hi XI Experts,
              We are facing problem regarding the Technical & business system in SLD.
              For deploying the readymade .tpz files , we have to define a technical system as ABAP in SLD.
              under this Technical system one Business system with specific name  to be defined.
               But problem is that in Custmor's landscape they have already defined a Technical system & corresponding Business system for a specific client 250.
    so while adding the new business system to existing technical system we are facing error:--
            Business system is alredy define for this client , choose another client.
        as a second option we defined a new technical system and when we try to define the new business system under this it also throw error:-
             Client is associated with Logical system name of existing business system.
            suggest the solution .

    Hi Sudhir, I think in XI  there is 1:n relationship between Technical sysytem and business system.
    Means for a technical system we can define a no. of business system , but only limitation is that for a Specific client we can define a single busines system with a logical system name.
    so i am looking for any way around. for my scenerio is to add a another business system to the client which has already defined business system.
    suggest if any alternative solution is there.
    with thanks.

  • Individual business system for ABAP and Java Stack

    Hi All,
    I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
    Thanks + Best Regards
    Jerome

    Are you sending same message type from ABAP proxy and Java Proxy to XI?
    If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
    Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
    --Archana

  • Problem by Maintaining a Business System for the Integration Server

    Hi to all,
    I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
    Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
    Since than I’m receiving the following error message when I try to refresh my adapter engine cache:
    com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
    Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
    I’ve also checked the IS URL (TR: SXMB_MONI) and it seems that it’s ok. 
    Regards
    Naycho

    Hi Naycho,
    i think you have to clean up some sld rubbish
    Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side  "business system". Delete all entries you find for your business system, after that try to recreate it.
    Regards,
    Udo

  • Business system for legacy system

    hi guys,
    Can we create  business system for legacy system ?If yes what is the use?
    satya reddy

    Hi,
    Yes you have to create Business system for legacy systems..
    It may be the Standalone java . or Third party system..
    When you are doing some POC or such type of things create Business Services
    also..
    A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
    It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
    See the below links..
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    Regards
    Chilla..

  • Registration of Business system for the Integration Engine Java in the SLD issue

    Hi,
    We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
    - Configuration Wizard: PI-AEX initial setup
    - Configuration Wizard: PI Self Test for AEX
    However when we were Checking the AEX Configuration as per help.sap.com
    Check the registration of a business system for the Integration Engine Java in the SLD:
        Enter https://<host>:<port>/sld .
        Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
        The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
    More information: SAP Note 1435392
    for us the Pipeline URL is as below
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    and the rest " ?ximessage=true "  is not there.
    Also we ran the below wizard
    Configuration Wizard: PI Self Test for AEX
    and it finished successfully without any issue.
    Any Suggestions what could be missing.
    Thanks,
    Regard
    Ahmed Mohammed

    Hi,
    I found the below SAPNOTE which confirms that the Pipeline URL should be
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
    However on help.sap.com it is different.
    Any one experienced the same ?
    Regards
    Ahmed Mohammed

  • Business Systems for File to File Configuration

    Good day.
    We need to created two (2) Business Systems for our File to File Configuration.
    Configuration Details:
    SWCV must be attached to a Product.
    Technical Systems must be Third Party.
    Business Systems must be identified as an Application System.
    Problem is that i don't know where to start. Can you help me.
    Thanks.

    Hi Abe
    Pls. follow below steps -->
    In SLD
    1. Create the Product & Software Component for File Systems.
    2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
    3. Create the Business Systems & select the corresponding technical system.
    In IR
    1. Import the SWCV from SLD using Tools --> Transfer from SLD option
    2. Create the Data Type & Message Type for source & destination .
    3. Create the Inbound & Outbound message interfaces
    4. Create the Message Mapping & interface Mapping.
    In ID
    1. Create the scenario
    2. Using context menu of Business System. Assign Business system for Source & target systems
    3. Create the Sender & receiver file adapter.
    4. Create the receiever determination, interface determination
    5. Create the Sender & receiver agreement.
    - Lalit -

Maybe you are looking for