Equipment and material

Dear all
I am not sure but I am posting this thread under MM area
I am facing one problem with Equipment .
The Equipment is belonging from plant A & the material which I entered in Equipment in under <b>serial data</b> belong from plant B .
I want system have to issue the Error massage if I entered the material which belong from different plant.
Can it is possible by doing any customisation setting .
Best luck to all
Regards
Nitin

hi nithin
here is the procedure
activate the serial no tab for equiment category S
while creating the equipement select the required material you want to assing
then you have to specify the stock information, if it is not matching with the material you have to change the material.
Note: if you don't enter the stock information then the equipment will be save under material number of different plant.
Another alternative is in construction type enter the material, then make in customizing that material and construction type to be similar.
regards
thyagarajan

Similar Messages

  • SWAP Equipment using IE4N, without serial number and material, it is possible?

    Hi PM Experts, I´ve been reading about the way to SWAP equipments from his functional location without using serial number and material, I think if it is not possible, but to be honest, I cannot find any logical answer for it, since equipment number is unique for a plant. Does anyone have found any work around for it?.
    I don’t want to use serial numbers and materials, because I think the process is really simple, since the client does not want to implement the refurbishment process. If there is a break down, here is what I do:
    Case 1:
    Dismantle damage equipment (Say PM01 Order Type)
    Install new equipment (same PM order)
    TECO the actual PM order
    ...Later
    Case 2:
    Create a new PM orden (say PM01 Order Type)
    Repair the break equipment
    TECO this new PM Order
    Here are the inconsistencies:
    What happen with the MTTR and MTBR reports?
    In case one, I´ll create the material as equipment, while I´m installing, starting date for his master data is the installation day, and the MTTR and MTBR will start to run. This is ok.
    What happened in case 2?, I need to stop the “clock” for the MTTR and MTBR of the dismantle equipment.
    This is the reason why, I would like to use IE4N, but since there are no serial number and material, I cannot.
    Can anyone please suggest a workaround for this scenario?.
    I´m thinking in use INAC (Object Deactivated) system status, can this status help me?, Does this status “stops” the clock for MTTR and MTBR report?. If I change the status to ACT, I´ll get the clock back running?.
    How about dismantle the equipment?, It will get the AVLB Available status, but the problem is, this equipment will be “floating” in the whole PM structure and I do not want it. I want to have it in a specific Functional Location but with this status, is this possible?. I woul like to use IE4N to SWAP UTs and later change the status to AVLB Available status, with and exits.
    I thinking in an Equipment Status and a “Z” MTTR and MTBR report, based on this status. But to be honest, I´d like a standard solution for it.

    For find my iPhone to work, the device has to be powered on and it has to be connected to a network (Cellular or WiFi).  Find My iPhone uses your AppleID as the account to search for.  Maybe the "guys" you were talking to were referring to a 3rd party application that essentially lo-jacks your device.  But even then, it would still require Power and a network. 
    I don't believe that there is currently a way to flag a specific serial number for location.
    Best of Luck.

  • View labor and material costs in plant maintenance work order

    Hi
    I am aware we can bring in the costs in the work order through Activity types and assigning the costs to the acitvity type.
    Is there anyway we can bring in the actual cost for the work performed by the associate? should we link the work center to HRMS?
    Please advise. I need your valuable input for all the points below.
    Main points that need to be addressed:
    1. Each associate that is capable of confirming hours to a work order needs to be assigned an hourly rate that is reflective of the actual cost for the work performed by this associate. These hours are then tracked through the work order to give a cost for labor assigned to that particular job.
    2.Any materials used in the performance of the required task(s) dictated by the work order will be assigned to that order. These materials can be assigned through SAP purchase requisitions, tool crib spot buys, or procurement with a purchase card.
    3.Standard reports need to be created so we can track the total maintenance costs for any level of the equipment hierarchy as currently set up in SAP. When this report is created it should show the total maintenace costs for all the levels of the equipment hierarchy broken down into labor cost and material cost.  I am using Tcode IW37N and IW40 . Is there any suggestion?

    Greetings Chandra,
    1) You will need to create Work Centres for your associates and create the Activity Types. You can default the Activity Type for each Work Centre and maintain the rate for the activity via t-code KP26 planning.
    2) Planned and unplanned Purchase Requisitions for Components with category N will debit the order with material costs. But what do you mean by "tool crib spot buys" and "procurement with a purchase card"? You may need to develop a solution to do such postings to the Order (or for purposes of Cost controlling, manual activity allocation similar to confirming work may be desired such as Manual Activity Allocations via CO transactions (KB21N), unless you can cover that with Purchase Requisitions and POs with "F Order" account assignment.
    3) MCI8 Cost Report should be suitable for you, once you set up the Value Categories & Cost Key Figures.
    See
    PMIS Cost Analysis Reporting Overview
    Maintenance Cost Key Figures in MCI3 and MCI8 Reports
    PM Order Value categories and costs display

  • Movement types for dismantling an equipment and putting in store

    Hi All,
    I am using refurbishment scenario.
    I have a equipment with material number and serial number. First I have to dismantle it from functional location.
    Q. Now my requirement is that I have to put that material in store in valuation type C3.
    At the time of installation material had C2 valuation type so now when I am putting it back to store via IE4N with 501 movement type it is allowing me to post only in C2 valuation.
    Q. What is the standard procedure to put the material in store in C3 valuation type after dismanlting. Which movement type is used?
    Sundar

    Hi Mohammad,
    I have maintained all valuation types also those are assigned. Material  also has all three valuation types C1, C2 & C3.
    I want to know the standrad procedure (alongwith movement types) before refurbishmen process starts.
    Whether material is sent to store in same valuation type i.e. C2?
    Or material is sent directly in C3 valuation type?
    Or material is first sent in C2 type and then transferred to C3 type?
    Sundar

  • What are the precautions to be taken while archiving the POs' and Material

    Hi All,
    I want to archive the Purchase orders and Material documents. Is there any standard rule to follow this procedure. What are the further consequences for the consecutive documents. And how do you check the open POs' of all.
                                 I have archived PRs' and Invoices, but these are not interlinked.
    Could you please help me in this, so that I will be very much thankful to you.
    Regards,
    Ram

    Dear Ramesh,
    Go to Tcode ARCHGUIDE --> Application Specific analyses and setting --> MM -->MM_EKKO and MM_MABTEL
    You can tick on the documentation and link to SAP help for all the guide and need for this archiving.
    Regards,
    w1n

  • Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

    Hi friend,
    i have issue regarding mandatory  self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
    i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
    Regard's,
    shaikh Khalid.

    Hi Shaikh
    First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
    Nabheet

  • PO number and material issued against this PO for subcontracting

    How to know the link in between the PO number and material issued against this PO for subcontracting.
    I have checked that PO history is not getting updated.
    Thanks,

    Hi,
    We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
    Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
    So when we are post goods receipt, then we will come to know the consuption quantities.
    Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
    If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
    Thansk,
    Satya.

  • PO Line Item wise gross value for combination of WBS and Material Group

    Hello,
    Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
    Regards,
    Milind Dumbre

    Dear Milind
    No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
    Warm regards
    Ramakrishna

  • How to  find the Open sale orders till date for  given plant and material ?

    Hi experts,
                     I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
    Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
    Kindly help
    Thanks in advance
    Ashwin

    Hi Ashwin,
        You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
       VBUK-GBSTK is the field that will give you the status of the Sales Order .
      VBUK is used at header level , whereas VBUP is used for Item level.
      So in your case what I would do is :
      Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status. 
       If I need to find the open quantity as well I will link to VBFA table based on the document number.
      Reward if helpful.
    Thanks,
    Imran

  • Table for finding rate based on part code and material

    Hi Experts
         I am an ABAP consultant with ltd knowledge on SD . Please tell me in which table  I can find the rate based on party code and material .

    Hi
    The standard table is A305. But usually these tables can be customized based on the requirement. So if you are aware about the Condition type for which this Price/Rate is maintained you can find the same in VK13.
    In transaction code VK13, maintain the condition type and click on "Condition information" icon. Now dont maintain any input date. Just click on Execute icon or F8. System will give the list of all the tables and data maintained based on the combination.
    Select the required table.In SE11, maintain this table with prefix as A. You can get all the required information.
    Regards
    Vamsi

  • Table and Materialized View in different namespaces?

    I've just faced something completly new for me. It appears that there are two objects with the same name and owner. Table and Materialized View have the same names and when I look into system dictionary I can se sth. like that:
    OWNER OBJECT_NAME OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE NAMESPACE
    USER_A USER_TABLE 159381 159381 TABLE 1
    USER_A USER_TABLE 159382 MATERIALIZED VIEW 19
    (I couldn't find how to write above with const length font).
    Two object in different namespace? I thought that Tables and Materialized Vievs have the same namespace.
    Can you please tell me how can I create objects to achieve above result? I would also be grateful if you tell me where to find that topic in documentation.

    Perfectly normal.
    SQL> select object_name, object_type from user_objects where object_name = 'TEST_MV';
    no rows selected
    SQL>
    SQL> create materialized view test_mv
      2  as
      3  select sysdate from dual;
    Materialized view created.
    SQL>
    SQL> select object_name, object_type from user_objects where object_name = 'TEST_MV';
    OBJECT_NAME                                        OBJECT_TYPE
    TEST_MV                                            TABLE
    TEST_MV                                            MATERIALIZED VIEW
    SQL>
    SQL> drop materialized view test_mv;
    Materialized view dropped.
    SQL>
    SQL> select object_name, object_type from user_objects where object_name = 'TEST_MV';
    no rows selected
    SQL>

  • How to get classification for a given material and material type in MM

    Hello Friends,
    One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
    He is looking for probable table and table fields to Select from.
    I would appreciate seriously any help in this regard.
    ~Yours Sincerely

    Hi
    Below given the flow and table details for a given class and class type.
    - Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
    - Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
    - Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
    - Table CABNT --> This table contains the "Description" for the internal character numbers.
    - award points if this is ok

  • Replication of Customer and Material master from R/3 to CRM

    Hi
    Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
    I went to B09 BB document and all settings are fine.
    Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
    I went to R3AM1 and checked the status as running or wait for each object.
    There are no filters in R3AC1 .
    Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2  .
    What can i do to resolve this problem.
    Please advice.
    Thanks,
    Vaishnavi

    Hello Vaishnavi,
    After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
    You can run this txn in test mode as well to see the affected tables.
    Are you getting any dump on these load ?Check it in txn:ST22.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Display 'item text' and 'material PO text' in a purchase order ?

    hello,
    i am creating a purchase order and i have inputted the 'item text' and 'material PO text' in the ITEM TEXT of the ITEM DETAILS section. I have a smart forms where i am displaying the purchase order by displaying fields from various tables like ekko,ekpo,t024,eket etc ..
    I want ti display the 'item text' and the 'material PO text' on the smartform but i cant find the table or the fields which keep these values(text) ??
    help me on this one ? thanks for yur time...

    c the example below:
    PERFORM read_text USING g_transp 'Z010'.
    FORM read_text USING l_text l_id.
      DATA : lt_text TYPE TABLE OF tline WITH HEADER LINE.
      DATA : l_name LIKE thead-tdname.
      CLEAR l_name.
      l_name = g_delivery.
      CLEAR lt_text.
      REFRESH lt_text.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
      CLIENT                        = SY-MANDT
          id                            = l_id
          language                      = sy-langu
          name                          = l_name
          object                        = 'VBBK'
        TABLES
          lines                         = lt_text
       EXCEPTIONS
         id                            = 1
         language                      = 2
         name                          = 3
         not_found                     = 4
         object                        = 5
         reference_check               = 6
         wrong_access_to_archive       = 7
         OTHERS                        = 8
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CLEAR l_text.
      LOOP AT lt_text.
        CONCATENATE l_text lt_text-tdline INTO l_text.
      ENDLOOP.
    ENDFORM.                    "read_text

  • While creation of a equipment and assignment of personnel number

    Hi
    I have activated partner function to the Equipment catagery.
    While creating equipment using T.code IE01,  I am assigning personnel number to the person responsible partnerfunction.
    After that personnel number getting defaulted to operator field as per config setting.
    I can create equipment and assign person responsible succussfully.
    But at the time of assignment of personnel number with partner function person responsible,  I am getting information messege always like
                     " No customer master record exists for customer 10003511"
    I would request you please suggest how  to "delink the above message" while creation of a new equipment and assigning the personnel number.
    Thanks & Regards
    CHSR

    Hello
    Please check the personal Number is active or exists in HR Master with its validity.Use TC for checking PA20 for checking the same.
    Regards,
    Rakesh

Maybe you are looking for